Cell width
Can I adjust the width of the cells in Numbers for iPad?
You can adjust the width of a column; you can't make one cell wider than the others in the same column.
See this.
Similar Messages
-
Problem with Characteristic cell width
Hi All,
I'm struggling to get the characteristic cell width using the table interface to work correctly.
I have coded the following in CHARACTERISTIC_CELL in the table interface :
move 'style="width:230px"' to c_cell_td_extend.
This appears to work in the Dev system but moving to production, it no longer applies and the charcteristic cells are the size of the values from the queries.
Would anyone have had this same prob or an idea of how to force the charcteristic cells to be the width I want them ?
The reason I am doing this is because I need to place multiple table results above one another and when I remove the cell headings the columns misalign ...
Thanks
ChrisChris,
if your modifier is working properly , you should be able to see the width=230px in the HTML source of the template.
Another way could be to attach this width to a stylesheet class and attach the class to the cell instead.
Arun
Assign points if useful -
Problem with increased cell width
Hi Gurus,
In Smartform while creating table, on wat basis we give the cell width i mean column width, is that based on the length of the variable, or is there any formula to align perfectly.
Thanks in Advance,
Viswam.
Message was edited by:
viswamHi,
You find the length of fieldname for the header and the field to be displayed in item.
Total
total(15),
here total is 5 characters while the variable under it can contain atmost 15 characters. So we assign cell width at least 15 + 5(min) = 20 unit. It basically depends on how many columns to display. If less columns are used you can be liberal, but if more number columns are to be displayed just add 5 or whatever number you want to the bigger of the two mentioned above.
Regards,
mallick -
Jtable cell width in JFileChooser
I wonder if there is a way to adjust the table cell width in JFileChooser ?
When I list the "My Computer" directory, I can see a list of drives in a JTable, such as "A:\", "C:\", "D:\", I've set it that way so that it displays the JTable view details as default. But the widths of the columns aren't the way I'd like to see, how can I adjust the cell widths of "Name", "Type","TotalSize" ...
Thanks
Frankuhmm yes, but i want to set automatically at run time,Then you need to calculate it at run time. Search the forum. There are many postings on this topic that give a solution. Basically you loop through all the rows in the column and invoke the prepareRenderer(...) method of the table and save the largest width and then set the TableColumn width.
-
Setting the cell width in a Tabular Form (SQL Query (updateable report) )
version 3.2.1
I have a Tabular Form (SQL Query (updateable report) ) and I have a column that is a VARCHAR2(4000) that when displayed extends the cell to the full length (which of course makes sense).
How can I set the width of this cell to something like 30 or 50 and wrap the contents?
Thanks,
JoeScott,
Thank you for replying.
Your suggestion kinda worked. I say kinda because when the report is first displayed the cell is the full width and appears to ignore the width setting. There is a Select List on the report to restrict some of the data that is displayed. When a selection is made from this Select List, it appears that the cell width is then adjusted to what was set, but not for every selection from this Select List.
I made the width entry in Tabular Form Element - Element Width
Any idea why the width setting is ignored?
Thanks,
Joe -
I want to resize the calendar cell width and height ? b'coz my calendar column value is huge(also i use custom option to display more than 2 columsn in the calendar column value).
I used Apex 3.2
Browser: IE 7
I tried changing the the seetings in Edit Page --> Item --> PX_CALENDAR_TYPE or PX_CALENDAR_DATE (hidden), but it doesnt affect my calendar cell spacing .....
Could any one please help on this ...
Regards,
Manoj
Edited by: 882468 on Nov 14, 2011 4:58 PMHello Manish,
The report column width will adjust depending your content.
In the html expression of your column definition you can wrap it in a div or span and specify for ex. style="overflow: auto; width: 100px;"
Hope that makes sense.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/ -
Hiya
I'm trying to make my jtree's cell width be equal to the width of the entire JTree it is in so that when selected, a highlight bar stretches across the entire jtree rather than just around the text of that node?
I've created a DefaultTreeCellRenderer and attached it to the jtree, and tried overriding the getWidth, getPreferredSize, getBounds, but I can't get it working.
How can I do this?
ThanksI've written a TreeCellRenderer called TreeCellSpanner for general JTree's based on the TreeList implementation that will span the tree cells to fill the width of the tree.
It is slightly different because I wanted it to work with any JTree, so I couldn't subclass JTree itself to take advantage of some of the hackish things I did with TreeList. So this version has to rely on a much worse hack, but it works for the general case and can be changed by subclassing and overriding the fireTreePathChanged(TreePath) method.
Here is the source:
[http://code.google.com/p/aephyr/source/browse/trunk/src/aephyr/swing/TreeCellSpanner.java]
Example usage is very easy:
public static void main(String[] args) {
JTree tree = new JTree();
TreeCellSpanner spanner = new TreeCellSpanner(tree, tree.getCellRenderer());
tree.setCellRenderer(spanner);
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.add(new JScrollPane(tree), BorderLayout.CENTER);
frame.setSize(300, 600);
frame.setLocationRelativeTo(null);
frame.setVisible(true);
Caveat: it leaves the root node alone to avoid creating an infinite loop of updating. So all nodes, except for the root node will expand the width of the tree. If you need a root node and want it to expand the width of the tree, then create a dummy root node with the child as the real root node and set root node invisible on the tree. -
How to adjust the cell width in the table
How can the width of the cell in a table for ADE be adjusted ?
I wrote the following HTML code in a ePub file.
<table style="width:100%;border-collapse: collapse;">
<tr><td style="width:25%">red</td>
<td style="width:75%">red</td></tr>
</table>
But, the created table runs over the page at the right side in the ADE (see figure). The values of widths in the both td tags are set to 50% and the same result is got. However, with no set of the values the table fits in the page.
Why? How should I do?Try adding "margin: 0;" to the table style (or to parent elements of the table)
In case you don't know already, itis easy to play quickly with HTML at a site like http://www.w3schools.com/html/tryit.asp?filename=tryhtml_basic
However, that won't reflect the 'outer' environment imposed by different browsers, eReaders etc.
The more explicit you make your HTML (eg explicit margin) rather than leaving it to environment support,
the more likely it is to appear the same (within reason of size etc) on all browsers/devices.
Probably worth making a fairly extensive style of your defaults that applies at the <doc> level. -
How to set mutable cell width and height in a jlist?
Hello,
i wrote a jlist cell renderer object to able to render a jlabel for the unselected items and a wide and high jpanel with images when an item is selected.
The jlist render all items at the same dimension.
How can i change this built-in behavior?
i printed the items preferedsize:
java.awt.Dimension[width=340,height=140]
java.awt.Dimension[width=275,height=75]
java.awt.Dimension[width=275,height=75]
java.awt.Dimension[width=275,height=75]
java.awt.Dimension[width=275,height=75]
java.awt.Dimension[width=275,height=75]
java.awt.Dimension[width=275,height=75]
Message was edited by:
fazekaim
ok, i give for every index pos a fix jpanel object, and it is working.
What i would like is a mouse selection and the selected item/cell should be rendered by a component with different dimension (containing more information). but this doesn't work.
Is it possible, that the JList cashes the cells dimensions???
Message was edited by:
fazekaim
Message was edited by:
fazekaimi just want to change a cell for another when i click on it.
there are names in the jlist. after having click on one of them, a description panel could be appears in the list instead of the short name. it' a simple ui effect, i think.
is there any other way than write a custom jlist implementation? -
Automatically Sizing Table Cell Width Using CSS
How can I get my CSS sheet to automatically size the width of
the table cells where text is located?
Example
Pagequote:
Originally posted by:
Newsgroup User
That's how table cells work with no prompting from you, if
they have no
width assigned at all.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"rmiman" <[email protected]> wrote in
message
news:ev0h1o$a4j$[email protected]..
> How can I get my CSS sheet to automatically size the
width of the table
> cells where text is located?
>
>
http://www.rminc.com/test_examples/test3.html
I know but let's say I want to have a table with a width of
600px and 5 columns, 2 of those colums have content and the other 3
don't. I want those 2 columns with content to automatically size
themselves but since my table has a width of 600px it won't
work. -
How do I reduce cell width with a long field name?
I'm creating an asp page, connected to an Access database.
When I create a page with, say the Dynamic Data Table "wizard," I
find that I cannot reduce the width of the data cells to anything
less than the label/field name length.
For instance, one field is "rsCities.ID" but it's only 2 or 3
digits wide. I'd like that cell in the table to be small, but I
can't figure out how to reduce it. Trying to move the resizing
handles doesn't work. Am I missing something?
Thanks in advance.
JerryHave you tried using Live Data view in DW?
When it's set up properly with a testing server, the Live
Data feature will
insert actual values from your database into Design View
rather than
fieldname placeholders.
Press F1 Help and search for Live Data.
Regards
John Waller -
Independent Cell Widths in a Table
Okay, need some help here. I may simpy be haveing brain freeze. I'm trying to adjust cells to have 3 columns on top and two on the lower rows. However, one og the columsn below wont change but reamin attached to any of the three columns on top (see image1).
I want it to look like this:
I know it can be done but for the life of me I can't remember.
Thanks,
ClydeUse this code and change it as appropriate.
<table style="width: 100%" border="1" class="style1">
<tr>
<td style="width: 33%"> </td>
<td style="width: 33%"> </td>
<td style="width: 34%"> </td>
</tr>
<tr>
<td style="width: 33%"> </td>
<td style="width: 33%"> </td>
<td style="width: 34%"> </td>
</tr>
<tr>
<td style="width: 33%"> </td>
<td style="width: 33%"> </td>
<td style="width: 34%"> </td>
</tr>
</table>
<table style="width: 100%" border="1" class="style1">
<tr>
<td colspan="2" style="width: 50%"> </td>
<td style="width: 50%"> </td>
</tr>
<tr>
<td colspan="2" style="width: 50%"> </td>
<td style="width: 50%"> </td>
</tr>
</table>
hth -
Single cell width fixing.
Instead of a whole column of cells taking on the width of the widest cell is it possible to isolate the widest cell (in my case has text in it) and have the remaining cells ( in the column a more reasonable width? This question mainly applies to Numbers 2 but will later be needed for Numbers 3
ThanksYellowbox wrote:
Hi Schrodinger,
Numbers 2:
Now select those cells and Wrap Text in Cell:
Or, In Numbers 3, select those cells then
Menu > Table > Wrap Text
That applies only to the selected cells, even though the Menu is "Table"
Hint: merging or splitting cells in any spreadsheet often leads to problems with cell references and sorting. Avoid merging and splitting; find another way to create your "presentation" look.
Regards,
Ian.
Thanks Ian
My concern above is now all the cells in Row A and Row 6 are all "fat". -
Hi,
I have menu titles with variable lengths. I found a thread that taught me how to switch the width to auto which was helpful. I would, however, like to increase the margain or padding in the cells. When I try in ul.menubarhorizontal, the padding and margians are meaningless. Can someone direct me to complete this?
Thanks
RobertOOPS,
I now am seeing the gaps. I had previously created the div and then placed the menu in the div. They are the same size. The div has a background color. In DW preview, it appears fine butr int he browser preview, the gaps are present despite the background in the div.
Any ideas?
Thanks -
I am trying to change the width of a individual cell within a
table in Dreamweaver 8, however when I click and drag to change the
width, it also grabs the cell above it, changing both cells,
however I only want to have the width of one cell changed.
I know that to do it in Microsoft products, you select the
one cell, but I have great difficulty to select an individual cell
in Dreamweaver and do not think it works anyway.
Please could someone tell me how to do it please? Thank you
n.b. I am a designer, and would prefer to know via designing
techniquesThat's not how cells in a HTML table work.
You can try splitting your cell(s) and see how that works.
"The Kelvinater" <[email protected]> wrote
in message
news:etuioq$bun$[email protected]..
>I am trying to change the width of a individual cell
within a table in
> Dreamweaver 8, however when I click and drag to change
the width, it also
> grabs
> the cell above it, changing both cells, however I only
want to have the
> width
> of one cell changed.
>
> I know that to do it in Microsoft products, you select
the one cell, but I
> have great difficulty to select an individual cell in
Dreamweaver and do
> not
> think it works anyway.
>
> Please could someone tell me how to do it please? Thank
you
> -
Having difficulty resizing a single cell width in a table
Hi
I have a table in a Pages 09 document with several different rows and columns. I'm having real trouble trying to resize a single cell - that is I have a row split into two columns and the left column won't shrink very far so I have loads of empty space after the text I have in that column which is a pain as it looks untidy. I've selected that cell and have no option to adjust column width in Table Inspector, I've selected 'Automatically adjust width to text size' and that's making no difference and trying to manually move the cell wall to the left makes no difference - it'll go so far and then no more.
What's just as annoying is that I have exactly the same 'one row/two columns' format just below this row and that left column cell shrinks even less, meaning I have a staggered columns set up going on down my table which looks daft.I am unable to reproduce this behaviour.
You may activate the "Show Invisible Characters" feature which will perhaps reveal the existence of extraneous chars.
If it's not that, I would be interested to receive this table.
Of course, remove personal infos from the document before sending it to my mailbox.
Click my blue name to get my address.
Yvan KOENIG (VALLAURIS, France) mercredi 31 mars 2010 22:07:25
Maybe you are looking for
-
Any tools/methods to normalize the relations in database
hi I need to normalize the relations upto 3NF in oracle database. please specify any method or tool to nrmalize.
-
Cisco 4503 "1000BaseLH" SFP light is not coming
Dear Team, I have Cisco 4503 and I have inserted 1000BaseLH and light is not coming up but for 1000BaseSX its fine. Please suggest. CORE#show int GigabitEthernet1/18 GigabitEthernet1/18 is down, line protocol is down (notconnect) Hardware is Gigabi
-
Yahoo messenger sign in silently without opening window on mac
I have yahoo messenger installed on my mac, which i want to login and start everytime i start my laptop, but i dont want it to pop out on the desktop but silently sign in. how can i do this.
-
My Mac log in screen (where you select a user account) is grey. It logs in ok, maybe a bit slow and works fine. Is this something I need to be concerned with?
-
.MOV file won't import to iMovie
Hello. Quicktime player is playing it fine, and the movie I'm trying to import even shows up in Finder under the Event I'm trying to create... yet it won't show up on the clipboard. ?