Centering the Slide in the work area?

Anyone know how I can get the general work area to display slightly differently?
Specifically, Keynote insists on the slide being shoved up against the top-left corner and I would prefer to have the slide centered in the work area so I can see things "bleeding" off of the page.
I don't get this at all and it's a bit frustrating. Is it me?
Dex

I'd like to see this as well so sent in a feedback form.
http://www.apple.com/feedback/keynote.html
a sort of workaround I've been using is selecting the object I want to move into the slide, anchoring it's move end point and manipulating it's startposition in the metrics tab of the inspector. It works if you're using straight motion paths but if you want to use a curved path or move off the slide, it doesn't always work.
also if you want to move a slide off the left or top of the slide, you can drag past the left/top boundary and even off the keynote window. the anchor will move past the edge. unfortunately the only way to edit it at that point is to delete the action and start over...major PITA.
guess we'll wait for KN09' or maybe Keynote"X"

Similar Messages

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show pr

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)? I tried backup & restore without success. I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there. Only the text that I entered shows. I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.

UPDATE: By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored. When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer. Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location). No Windows or Elements search revealed this fact. I am appreciative that I just got lucky. The Adode/Photoshop company was absolutely of no help. If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product. Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed.
Bottom line: All of the projects (sideshows) have been recovered and work in my new Windows 7 computer. I hope my experience helps others.

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

The type of the database table and work area (or internal table)...

Hello
I am trying to use a database and select all records from it and store them into an internal table.
My code:
Select * from xixi_dbcurrency into table gt_currency.
The error:
"The type of the database table and work area (or internal table) "GT_CURRENCY" are not Unicode-convertible . . . . . . . . . .     "
Any suggestions?
Thank you

Hi Thomas,
Thank you for your inputs above.
But as you suggested is we use INTO CORRESPONDING FIELDS OF TABLE then it resolve the error.
But I have below piece of code:
DATA:    it_new_source TYPE STANDARD TABLE OF _ty_s_sc_1,
              wa_source TYPE _ty_s_sc_1,
              wa_new_source TYPE _ty_s_sc_1,
              ls_target_key TYPE t_target_key.
SELECT * INTO CORRESPONDING FIELDS OF TABLE it_new_source
       FROM /bic/afao06pa100
       FOR ALL ENTRIES IN SOURCE_PACKAGE
       where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
       and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
But since this is reading into corresponding fields of table the data load from one DSO to other DOS is running for long more that 15 hours and still not getting completed and giving dump.
So if I switch the search to below:
SELECT * FROM /bic/afao06pa100
   INTO TABLE it_new_source
       FOR ALL ENTRIES IN SOURCE_PACKAGE
       where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
       and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
Then I am getting below error:E:The type of the database table and work area (or internal table) "IT_NEW_SOURCE" are not Unicode convertible.
Can you please advice on this, as performance need to improve in start routine code.
Thank You.

The type of the database table and work area are not Unicode convertible

***Data declaration
TYPES : BEGIN OF t_zle_lagerplanung,
                   SEl, "stores which row user has selected
                   kdauf TYPE zle_lagerplanung-kdauf,
                   kdpos TYPE zle_lagerplanung-kdpos,
                   etenr TYPE zle_lagerplanung-etenr,
                   papiermaschine TYPE zle_lagerplanung-papiermaschine,
                   runnr TYPE zle_lagerplanung-runnr,
                   prio TYPE zle_lagerplanung-prio,
                   werk TYPE zle_lagerplanung-werk,
                   durchmesser TYPE zle_lagerplanung-durchmesser,
                   breite TYPE zle_lagerplanung-breite,
                   anzle TYPE zle_lagerplanung-anzle,
                   lgpla TYPE zle_lagerplanung-lgpla,
                   lgtyp TYPE zle_lagerplanung-lgtyp,
                   art TYPE zle_lagerplanung-art,
                   anzhoehe TYPE zle_lagerplanung-anzle,
                   fa TYPE zle_lagerplanung-fa,
END OF t_zle_lagerplanung.
DATA : it_zle_lagerplanung TYPE STANDARD TABLE OF t_zle_lagerplanung INITIAL SIZE 0,
            wa_zle_lagerplanung TYPE t_zle_lagerplanung.
Here I am getting the data in internal table by using thiis select statement.
SELECT kdauf kdpos etenr papiermaschine runnr prio werk durchmesser breite
              anzle lgpla lgtyp art anzhoehe fa
FROM    zle_lagerplanung INTO CORRESPONDING FIELDS OF TABLE it_zle_lagerplanung
WHERE kdauf IN s_kdauf
AND       KDPOS IN s_kdpos
AND      werk = p_werks.
But while updating the particular field in zle_lagerplanung using this statement
UPDATE zle_lagerplanung from table it_zle_lagerplanung.
it is giving syntax error
"The type of the database table and work area (or internal table)
"IT_ZLE_LAGERPLANUNG" are not Unicode convertible. "
Could any one help me out how to resolve this problem....
Thanks in advance

Dear Shayamal,
XXX....are not Unicode convertible
This error comes while inserting or updating database and the fields are not matching between data base table and structure .
Check you fields of data base table and "zle_lagerplanung" and struture "it_zle_lagerplanung" . There fields must match.
thanks and regrds,
Anup Banerjee

Cannot see the system folder(private work area) in the dependency manager

Hi
I am not able to see the 'system folder'(private work area) in the dependency manager tool.
I have captured the user schema in this folder, and want to see dependency information of objects in it.
Please Help.
Thanks

Hi Guru,
Please go through SAP note # 1333684 and configure accordingly.
Also, follow the note # 1042993, if problem is not getting resolved.
Thanks
Pavan

Accidentally hit the 'trim comp to work area'. Now I can't get my files back into comp timeline.

I'm using After Effects CC on my macpro. When going to add a shot to the render queue, I accidentally hit the 'trim comp to work area' and didn't notice what had happened until I went to go back to work on other shots. I tried to hit Control Z but it was too late it seemed and it wouldn't go back to how it was. i tried resetting the length of the comp and putting the files back, but no use. Tried making a new comp and copy and pasting all the files in the side panel of my orig comp, but nothing. Tried re-adding the same file from the project window and copying and pasting the effects keyframes from the orig shot to the new one but they didn't line up properly.
I still have all the files in the comp side panel but can't seem to get them back into the now extended timeline. I still have all the effects I've been doing for the past 3 weeks, but can't do anything to get them into a position where I can continue to manipulate them.
I've searched a bunch of forums and can't find this problem anywhere.
Have I lost all my work? Please help.

It appears that you've pushed those layers into negative time, which you can't view in the Timeline. To get the layers back into the Timeline view, you'll need to move the layers in time with keyboard shortcuts. I assume that you've got your layers arranged in an edit, and you want to preserve their relationships, so do the following:
Select all of the layers.
Hold down Alt/Option+Shift and press Page Down until the layers are visible. This shortcut moves layers 10 frames later in time. Removing Shift moves them 1 frame at a time. Using Page Up instead of Page Down will move them earlier in time.
Another useful pair of shortcuts is [ and ], which set the in or out points of the select layer(s) to the current time. But you probably don't want to use those shortcuts in this case because you'll lose the time relationships of your edit.

My ipod touch has an "activation required" error and the slider won`t work

I have an itouch that is only 2.5yrs old and only gets occassional use. A week ago the slider wouldn't work; power switch didn't work; I reset and then tried (unsuccessfully) to restore to factory settings through itunes but encountered an error. At that point it appeared to be restored and I had use of original feature (clock, settings, etc) but I could not connect to WiFi and when I tried to connect to itunes again it did not recognize my device and now my Windows does not recognize my device. It tried to reset again but now I get an "activation required" error and the slider won`t work again.
I have read of other with the same problem but found no solution
Any help is greatly appreciated,
Thanks

Next try thge remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Is there any way to increase the contrast of the slider in the Table of Contents? It becomes very hard to see as you slide down a presentation. This has been asked before, a few years back. Has a solution been provided?

I designed an interactive script using Captivate 7. It works like a branching scenario, and is currently in use by about 350 phone operators, soon to be over 750. Everybody is pretty happy about it, but I am getting complaints - especially form the older people - that the slider in the TOC is very hard to see, and I agree - as you scroll down the TOC entries, the slider becomes lighter and lighter in color. Is there any way to tweak it so that I can increase contrast, or recolor it in a darker tone? I know this was discussed a couple of years ago, but I don't know if the issue was addressed by Adobe, or if anyone has come up with a solution.

I designed an interactive script using Captivate 7. It works like a branching scenario, and is currently in use by about 350 phone operators, soon to be over 750. Everybody is pretty happy about it, but I am getting complaints - especially form the older people - that the slider in the TOC is very hard to see, and I agree - as you scroll down the TOC entries, the slider becomes lighter and lighter in color. Is there any way to tweak it so that I can increase contrast, or recolor it in a darker tone? I know this was discussed a couple of years ago, but I don't know if the issue was addressed by Adobe, or if anyone has come up with a solution.

Positioning the slide in the centre of the window

Can anyone help? I'd like to position the slide in the centre of the window, rather then the default top-left position in Navigator & Outline views. It is central by default in Powerpoint and I am used to manipulating graphics/motion paths etc to the side of the slide.

Thank you for the welcome and the answer. It's a shame as it makes things a bit more awkward to work with. Thank you!

Your opinion on whether to insert a Captivate 5 swf or copy the slides from the swf's project?

I was wondering what peoples opinion is on inserting a Captivate swf or just copy and paste the slides from the project? If I insert a swf the project would be smaller, but sometimes its harder to control the swf (as in playing it inside of a project). If I copy and paste the slides, my project could have over 150 slides. I know that I can break down into small chunks, like one project per procedure, but..
I just would like some other people's opinion on this. I really appreciate any insight you may have ont. Thanks.

I've not had good luck putting Captivate-published SWF files into a new CP project file... As you say, playback can get crazy, slide completions not marked correctly, timings off...
If the SWF files I have are not interactive, I convert them to FLV/F4V and import them into the new CP project that way - much more reliable in my experience.
If they are interactive though, I just past the slides themselves.

Iphoto 09, the slider for the thumbnail doesn't show full size image

The slider in the lower left that when to the left shows small thumbnails and when to the right, to the "head icon", shows the image enlarged to fill the window, is broken in iPhoto 09. When you slide all the way to the right or click the head icon, the biggest the images magnify to is thumbnails sized to four across and three high thumbnails (displaying 12 big thumbnails rather than one screen filling image). The only way to examine the image now in 09 is to go into edit mode, which still has the row of thumbnails across the top instead of a single large image.
This is really annoying and stupid and makes the program much less useful. Why would they change the program to make it impossible to see the images at full screen unless in edit mode? Any way to put it back to the 08 behavior?

It does seem a bit silly to retain the icon that implies a full sized viewing though.
iPhoto menu -> Provide iPhoto Feedback
If a change is an improvement, I'm all for it. If it is an arbitrary and unnecessary change, it can just be irritating. Like changing the reload button in Safari from the upper left to a variable position somewhere in the upper middle part of the window, a change that improved nothing and probably was a bad idea; changing a constantly located icon to one that roams around depending on the window width.
Absolutely. Not sure what that has to do with iPhoto, though.
I can cope with changes that make things more efficient or improve quality.
Good to know.
I don't quite understand the defense of mindless changes that merely require the user to dig around and waste time figuring out what happened to seemingly missing standard features.
But who’s defending anything?
I don't think that the sheep who copes by blithely accepting being herded onto the slaughterhouse truck is necessarily exercising any signs of higher intelligence.
True. But what do you make of the one who goes ranting off about things based on incorrect information?
This change in the software is inconvenient and makes the program worse.
By way of explanation and not at all to defend: It’s a subtle thing, I know. But it does add a level of coherence to the OS. Quicklook in the Finder, for instance, does a similar thing with the same keystroke. Itunes starts playing a track on the same keystroke. So, I’m not sure where the failed analysis is.
Regards
TD

How do you print the slides in the question pool in captivate 6?

how do you print the slides in the question pool in captivate 6?

You move them back into the main project first, and then print them like other slides.

Why can't I get the slider on the right side to remain active ?

Why can't I get the slider on the right side to remain "active" ?
I'm using iTunes 11.4 on a Mac Pro with OS 10.9.5
In good old iTunes 10.7 there was a slider on the right side that you can move up and down to locate songs. That same slider is there, (but much smaller), with iTunes 11.4, but it seems to deactivate itself for reasons I do not understand.
I have found that when I go to the lower right corner and resize the iTunes window the slider will appear briefly. If I don't act very fast, that slider vanishes and I cannot scroll up and down.
Thanks !!

As Apple said in June, iOS 7 is not compatible with the 4G iPod.
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

What is the relation between object work area (EH&S) and Work Center (PP)

Hi gurus,
I have a conceptual doubt, about the relation when I clasify like work center an object WA of IHS and how this feature is asociated at object work center of module PP?
Conceptually is the same?
Thank and Best regards

Hello Hernan
the Work Area is defined as: take a look here
http://help.sap.com/saphelp_47x200/helpdata/en/1f/ea8e69e09311d3b5700004ac160be0/content.htm
Therefore there is a link available between work area, plant and cost center.
Work Center is defined as: take a look here:
http://help.sap.com/saphelp_46c/helpdata/en/b1/c03424439a11d189410000e829fbbd/content.htm
Work centers are business objects that can represent the following real work centers, for example:
Machines, machine groups
Production lines
Assembly work centers
Employees, groups of employees
To my knowledge there is no "direct" link between these objects.
Further on on the level of the Work Area (to my knowledge) you define: which employee etc. is linked to the work area ((is working in the work area).
So to my knowledge there are a number of "indirect" links between both objects but no direct link
With best regards
C.B.
PS: http://fuller.mit.edu/ehs/ind_hygiene_safety.htm provides a further small overview of the Work Area Topic (EHS IHS)
Edited by: Christoph Bergemann on Nov 15, 2011 8:53 PM
Edited by: Christoph Bergemann on Nov 15, 2011 8:55 PM

Centering the Slide in the work area?

Similar Messages

Maybe you are looking for