The type of the database table and work area (or internal table)...
Hello
I am trying to use a database and select all records from it and store them into an internal table.
My code:
Select * from xixi_dbcurrency into table gt_currency.
The error:
"The type of the database table and work area (or internal table) "GT_CURRENCY" are not Unicode-convertible . . . . . . . . . . "
Any suggestions?
Thank you
Hi Thomas,
Thank you for your inputs above.
But as you suggested is we use INTO CORRESPONDING FIELDS OF TABLE then it resolve the error.
But I have below piece of code:
DATA: it_new_source TYPE STANDARD TABLE OF _ty_s_sc_1,
wa_source TYPE _ty_s_sc_1,
wa_new_source TYPE _ty_s_sc_1,
ls_target_key TYPE t_target_key.
SELECT * INTO CORRESPONDING FIELDS OF TABLE it_new_source
FROM /bic/afao06pa100
FOR ALL ENTRIES IN SOURCE_PACKAGE
where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
But since this is reading into corresponding fields of table the data load from one DSO to other DOS is running for long more that 15 hours and still not getting completed and giving dump.
So if I switch the search to below:
SELECT * FROM /bic/afao06pa100
INTO TABLE it_new_source
FOR ALL ENTRIES IN SOURCE_PACKAGE
where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
Then I am getting below error:E:The type of the database table and work area (or internal table) "IT_NEW_SOURCE" are not Unicode convertible.
Can you please advice on this, as performance need to improve in start routine code.
Thank You.
Similar Messages
-
Difference between Field symbols and work area for Internal tables
Hi,
In ECC versions we all know that we need to declare the internal tables without headerline, and for handling the internal tables we need to use exclusive work areas.
Currently i have an issue that we have been asked to use field symbols instead of work areas...can any one help me how to use the field symbols and also let me know how it will improve the performance of the program..
Thanks and Regards,
KathirHi
DATA: WA TYPE ITAB.
LOOP AT ITAB INTO WA.
IF WA-FIELD = .....
ENDIF.
ENDLOOP.[(code]
FIELD-SYMBOLS <WA> TYPE ANY.
LOOP AT ITAB ASSIGNING <WA>.
ENDLOOP.
Now the problem is you can't know the name of the fields of the table at runtime, so you can't write:
IF <WA>-FIELD = .....
ENDIF.
Anyway you can create a field-symbols strcturated like the table:
[code]FIELD-SYMBOLS <WA> TYPE ITAB.
LOOP AT ITAB ASSIGNING <WA>.
IF <WA>-FIELD = .....
ENDIF.
ENDLOOP.
I don't know which are the differences for the performance between to use a field-symbol and to use a structure as work-area.
The differnce between the field-symbols and work-area is the field-symbol is assigned directly to the record, so u don't need to do a MODIFY statament to change something:
LOOP AT ITAB INTO WA.
WA-FIELD =
MODIFY ITAB FROM WA.
ENDLOOP.
LOOP AT ITAB ASSIGNING <WA>.
<WA>-FIELD =
ENDLOOP.
These two pieces of abap code do the same action, so probably the field-symbol improve the performance because it do an access directly to the record without to use an external structure as workarea.
Max -
The type of the database table and work area are not Unicode convertible
***Data declaration
TYPES : BEGIN OF t_zle_lagerplanung,
SEl, "stores which row user has selected
kdauf TYPE zle_lagerplanung-kdauf,
kdpos TYPE zle_lagerplanung-kdpos,
etenr TYPE zle_lagerplanung-etenr,
papiermaschine TYPE zle_lagerplanung-papiermaschine,
runnr TYPE zle_lagerplanung-runnr,
prio TYPE zle_lagerplanung-prio,
werk TYPE zle_lagerplanung-werk,
durchmesser TYPE zle_lagerplanung-durchmesser,
breite TYPE zle_lagerplanung-breite,
anzle TYPE zle_lagerplanung-anzle,
lgpla TYPE zle_lagerplanung-lgpla,
lgtyp TYPE zle_lagerplanung-lgtyp,
art TYPE zle_lagerplanung-art,
anzhoehe TYPE zle_lagerplanung-anzle,
fa TYPE zle_lagerplanung-fa,
END OF t_zle_lagerplanung.
DATA : it_zle_lagerplanung TYPE STANDARD TABLE OF t_zle_lagerplanung INITIAL SIZE 0,
wa_zle_lagerplanung TYPE t_zle_lagerplanung.
Here I am getting the data in internal table by using thiis select statement.
SELECT kdauf kdpos etenr papiermaschine runnr prio werk durchmesser breite
anzle lgpla lgtyp art anzhoehe fa
FROM zle_lagerplanung INTO CORRESPONDING FIELDS OF TABLE it_zle_lagerplanung
WHERE kdauf IN s_kdauf
AND KDPOS IN s_kdpos
AND werk = p_werks.
But while updating the particular field in zle_lagerplanung using this statement
UPDATE zle_lagerplanung from table it_zle_lagerplanung.
it is giving syntax error
"The type of the database table and work area (or internal table)
"IT_ZLE_LAGERPLANUNG" are not Unicode convertible. "
Could any one help me out how to resolve this problem....
Thanks in advanceDear Shayamal,
XXX....are not Unicode convertible
This error comes while inserting or updating database and the fields are not matching between data base table and structure .
Check you fields of data base table and "zle_lagerplanung" and struture "it_zle_lagerplanung" . There fields must match.
thanks and regrds,
Anup Banerjee -
Structure of table and work area are not compatible - table control wizard
Structure of table and work area are not compatible is the error i am getting when specifying my internal table and work area in my table control? What am I doing wrong?
hii
this error comes when you have different structure of work area then internal table..so work area will not work here and you will not be able to append records in internal table.
check strucure of internal table and work area.it should be like below.
TYPES:
BEGIN OF type_s_kna1,
kunnr LIKE kna1-kunnr, " Customer Number
name1 LIKE kna1-name1, " Name
vbeln LIKE vbap-vbeln, " Sales Document
END OF type_s_kna1.
* Internal Table And Work Area Declarations For Customer Details *
DATA : t_kna1 TYPE STANDARD TABLE OF type_s_kna1,
fs_kna1 TYPE type_s_kna1.
regards
twinkal -
The work area (or internal table) "IT_ZLE_LAGERPLANUNG" is not flat,
***Data declaration
TYPES : BEGIN OF t_zle_lagerplanung,
SEl, "stores which row user has selected
kdauf TYPE zle_lagerplanung-kdauf,
kdpos TYPE zle_lagerplanung-kdpos,
etenr TYPE zle_lagerplanung-etenr,
papiermaschine TYPE zle_lagerplanung-papiermaschine,
runnr TYPE zle_lagerplanung-runnr,
prio TYPE zle_lagerplanung-prio,
werk TYPE zle_lagerplanung-werk,
durchmesser TYPE zle_lagerplanung-durchmesser,
breite TYPE zle_lagerplanung-breite,
anzle TYPE zle_lagerplanung-anzle,
occupied TYPE zle_lagerplanung-text30,
free TYPE zle_lagerplanung-text30,
lgpla TYPE zle_lagerplanung-lgpla,
lgtyp TYPE zle_lagerplanung-lgtyp,
art TYPE zle_lagerplanung-art,
anzhoehe TYPE zle_lagerplanung-anzle,
zindicator TYPE zle_lagerplanung-text30,
fa TYPE zle_lagerplanung-fa,
field_style TYPE lvc_t_styl, "FOR DISABLE
END OF t_zle_lagerplanung.
I am getting the data in internal table by using thiis select statement.
SELECT kdauf kdpos etenr papiermaschine runnr prio werk durchmesser breite
anzle lgpla lgtyp art anzhoehe fa
FROM zle_lagerplanung INTO CORRESPONDING FIELDS OF TABLE it_zle_lagerplanung
WHERE kdauf IN s_kdauf
" AND kdpos = p_kdpos
AND KDPOS IN s_kdpos
AND werk = p_werks.
But while updating the particular field in ztable using this statement
UPDATE zle_lagerplanung from table it_zle_lagerplanung.
it is giving syntax error
"The work area (or internal table) "IT_ZLE_LAGERPLANUNG" is not flat, or
contains reference or internal tables as components. components.
components. components. components."
Could any one help me out how to resolve this problem....
Thanks in advanceHi Shyamal,
lvc_s_styl is a structure so you will get the same error.
for your select and update statement you dont need field "field_style".
regards
rea -
Hi,
can anybody explain the concepts of Internal table and work area.Thanks in advance.hai,
This may help u.
WORKAREA is a structure that can hold only one record at a time. It is a collection of fields. We use workarea as we cannot directly read from a table. In order to interact with a table we need workarea. When a Select Statement is executed on a table then the first record is read and put into the header of the table and from there put into the header or the workarea(of the same structure as that of the table)of the internal table and then transferred top the body of the internal table or directly displayed from the workarea.
Each row in a table is a record and each column is a field.
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
e.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
Internal tables are used for storing records which are obtained as a result when we use select statement on database. internal tables are run time entities and doesn't occupy any memory. they are dynamic.
internal tables are of types.
1. internal tables with header line. [header and body]
2. internal tables with out header line. [only body]
Workarea is the concept which is mainly useful when working with internal tables with out header line.
at any point of time we can access only one record through header of a internal table. every thing should be done [inserting,modifying, reading ] through header only.
ex: data: itab like standard table of mara with header line.
for internal tables with out header line we will create a work area [explicit header] as type of table for storing data into internal table.
ex: data: itab like mara,
wa like mara.
more about internal table types:
Standard table:
The key access to a standard table uses a sequential search. The time required for an access is linearly dependent on the number of entries in the internal table.
You should usually access a standard table with index operations.
Sorted table:
The table is always stored internally sorted by its key. Key access to a sorted table can therefore use a binary search. If the key is not unique, the entry with the lowest index is accessed. The time required for an access is logarithmically dependent on the number of entries in the internal table.
Index accesses to sorted tables are also allowed. You should usually access a sorted table using its key.
Hash table:
The table is internally managed with a hash procedure. All the entries must have a unique key. The time required for a key access is constant, that is it does not depend on the number of entries in the internal table.
You cannot access a hash table with an index. Accesses must use generic key operations (SORT, LOOP, etc.).
Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index.
The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always
have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for
processing large amounts of data.
TYPES VECTOR TYPE HASHED TABLE OF I WITH UNIQUE KEY TABLE LINE.
TYPES: BEGIN OF LINE,
COLUMN1 TYPE I,
COLUMN2 TYPE I,
COLUMN3 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF SPFLI
WITH UNIQUE KEY CARRID CONNID.
with regards,
B.Sowjanya,
reward points if helpful. -
Using se16, I am opening a certain database table and it is asking me for the "work area".
What I would like to do is, I want to see the data of VN_TNAPR (or any table) regardless of work area and all at the same time on one screen/table. I have lots of table that ask for that work area.
How to solve this? Any tcode?
see image: http://i1104.photobucket.com/albums/h336/809836724/sd/databrowserAug172011-2x.jpgHai Anwar,
In our system when i run with BLANK
All fields which define the
area have initial values.
Check Input Values
Click continue
But no output data came in the Table.
Could you please share for what requirement you are using this Table.
Regards,
Mani -
Working Area for Internal Table
Hi,
i know that process of internal table if it is with headerline but i don't know how the data pass to our internal table if it is with out header line plzz give me the example code for that.
Thanks in advanceThe following example shows two programs with the same function. One uses a header line, the other does not.
With header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1
WITH HEADER LINE.
DO 4 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
INSERT TABLE ITAB.
ENDDO.
ITAB-COL1 = 2.
READ TABLE ITAB FROM ITAB.
ITAB-COL2 = 100.
MODIFY TABLE ITAB.
ITAB-COL1 = 4.
DELETE TABLE ITAB.
LOOP AT ITAB.
WRITE: / ITAB-COL1, ITAB-COL2.
ENDLOOP.
Without header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1,
WA LIKE LINE OF ITAB.
DO 4 TIMES.
WA-COL1 = SY-INDEX.
WA-COL2 = SY-INDEX ** 2.
INSERT WA INTO TABLE ITAB.
ENDDO.
WA-COL1 = 2.
READ TABLE ITAB FROM WA INTO WA.
WA-COL2 = 100.
MODIFY TABLE ITAB FROM WA.
WA-COL1 = 4.
DELETE TABLE ITAB FROM WA.
LOOP AT ITAB INTO WA.
WRITE: / WA-COL1, WA-COL2.
ENDLOOP.
The list, in both cases, appears as follows:
1 1
2 100
3 9 -
Avoiding Z-table and having a global internal table during Sales Order
Hi All,
I have a requirement like this.
1. In the R/3 system I am creating Sales order.
2. For each line item, it will call APO system to check the availability of the materials and the informaiton is returned back to
R/3 system.
3. As the soon as the informaiton is recieved in R/3 system, we found one enhancement point and this informaiton is being captured now in a Z-table to do some processing while saving the order after processing all the line items
4. I wanted to avoid the Z-table and want to have some global internal table which will be available till the end of the processing of the sales order.
Solution I am thinking of:
1. One option could be creating a global internal table in SAPMV45A program in one of the enhancement points in the TOP declaration. But, that global internal table is not accessible in the enhancement point where I wanted to store the information. Because, I am actually updating the table in a FM.
2. Export it to memory and import it when needed. But, how to update the informaiton in this intenal table(which is in memory) for every line item
Please guide me. Any help on this would be highly appreciated.
Thanks,
Babu Kilari>
Babu Kilari wrote:
> Solution I am thinking of:
>
> 1. One option could be creating a global internal table in SAPMV45A program in one of the enhancement points in the TOP declaration. But, that global internal table is not accessible in the enhancement point where I wanted to store the information. Because, I am actually updating the table in a FM.
> Babu Kilari
If you are updating this table in a FM, you can always add one tables parameter to the function ( if it is a custom function) and pass the globally declared internal table to the function call in the user exit update the table in the FM and when the end function is reached, you will have the updated internal table again at the user exit after the function call.
Imp- Declare your internal table in MV45ATZZ.
KR,
Advait
Edited by: Advait Gode on Aug 6, 2009 8:16 AM -
I need insert /update/modify ztable from internal table or work area
I have one simple problem.
TYPES: BEGIN OF t_account,
acc_no LIKE zztaccountheader-acc_no,
cust_id LIKE zztaccountheader-cust_id,
acc_type LIKE zztaccountheader-acc_type,
od_option LIKE zztaccountheader-od_option,
od_limit LIKE zztaccountheader-od_limit,
od_issue_date LIKE zztaccountheader-od_issue_date,
END OF t_account.
data: lwa_account TYPE t_account,
li_account TYPE STANDARD TABLE OF t_account,
bu scerrin i am inputing data :
i want modify updare or insert record into ztable by work area i put following thing
MOVE : zztaccountheader-acc_no TO lwa_account-acc_no,
zztcustomer-cust_id TO lwa_account-cust_id,
zztaccountheader-acc_type TO lwa_account-acc_type,
zztaccountheader-od_option TO lwa_account-od_option,
zztaccountheader-od_limit TO lwa_account-od_limit,
zztaccountheader-od_issue_date TO lwa_account-od_issue_date.
INSERT zztaccountheader CLIENT SPECIFIED FROM lwa_account .
CLEAR lwa_account.
ENDIF.
i am etting error
The type of the database table and work area (or internal table)
"LWA_ACCOUNT" are not Unicode convertible.
please solve ithi,
decalre like this.
tables : zztaccountheader.
data : t_account like zztaccountheader occurs 0 with header line.
data: lwa_account TYPE t_account,
li_account TYPE STANDARD TABLE OF t_account,
MOVE : zztaccountheader-acc_no TO lwa_account-acc_no,
zztcustomer-cust_id TO lwa_account-cust_id,
zztaccountheader-acc_type TO lwa_account-acc_type,
zztaccountheader-od_option TO lwa_account-od_option,
zztaccountheader-od_limit TO lwa_account-od_limit,
zztaccountheader-od_issue_date TO lwa_account-od_issue_date.
INSERT zztaccountheader CLIENT SPECIFIED FROM lwa_account .
CLEAR lwa_account.
ENDIF.
rgss
anver
if hlped mark points -
Difference between tables statement and work area
Hi
i would like know the difference between these statement.
tables: vttk.
data :itab type standard table of vttk,
wa_itab like line of vttk.
what will happen with the table statement keyword ???
whether any difference between the ouput created through tables and wa_itab statement???Hi
HI,
INTERNAL Table and it's background:
===================================
Internal table acts as a container which is used to store the record sets. That is used to store the data fetched from the database table.
So due to performance reason every time access to database would not be so good and decrease the performance. So you just select the data from the database and store it in the intermediate table. This table is called INTERNAL TABLE. So it's an replica of the database. The design foes like this,
PRESENTATION SERVER <> APPLICATION SERVER <>
DATABASE SERVER.
So everytime gain accessing to database results in high resource usage and bad permformance.
So always play around with internal tables. So obviously the whenever you access the data in the INTERNAL TABLE, the application server will be used.
WORK AREA:
==========
When ever you loop at the internal table, the current record should be stored in a temporary work place. That is called WORK AREA.
LOOP AT ITAB INTO WORKAREA.
ENDLOOP.
ITAB :An internal table
WORKAREA:An instance of internal table
Go thru the link below
Internal tables
appending internal tables.
<b>Reward if usefull</b> -
Internal table with header line and work area.
data:itab like LIKE bapimepoheader.
DATA : BEGIN OF it_po_items OCCURS 0.
INCLUDE STRUCTURE bapimepoitem.
DATA : END OF it_po_items.
DATA:it_input TYPE STANDARD TABLE OF typ_input,
wa_input TYPE typ_input,
LOOP AT it_input INTO wa_input WHERE poind = 'H'.
CLEAR wa_po_header.
wa_po_header-doc_type = wa_input-bsart.
wa_po_header-comp_code = wa_input-bukrs.
wa_po_header-vendor = wa_input-lifnr.
CLEAR it_po_items.
it_po_items-po_item = v_itemcount * 10.
it_po_items-acctasscat = wa_input-knttp.
it_po_items-material = wa_input-matnr.
it_po_items-plant = wa_input-werks.
it_po_items-quantity = wa_input-menge.
it_po_items-net_price = wa_input-netpr.
it_po_items-po_unit = wa_input-meins.
it_po_items-free_item = wa_input-umson.
it_po_items-tax_code = wa_input-mwskz.
it_po_items-gr_ind = wa_input-wepos.
it_po_items-gr_non_val = wa_input-weunb.
it_po_items-incoterms1 = wa_input-inco1.
it_po_items-incoterms2 = wa_input-inco2.
it_po_items-vend_mat = wa_input-idnlf.
it_po_items-taxjurcode = wa_input-txjcd.
it_po_items-item_cat = wa_input-pstyp.
APPEND it_po_items.
here my doubt is whether i can move data from work area to internal table in this way?
whether this is the correct approach or not?hii,
u can define structure and make workarea ,internal table using that structure.
for example
types:begin of struct,
declare all fields,
end of struct.
data:wa type struct,
int_tab type standard table of struct.
hope this will help u. -
Internal table declaration - work area and body
Hi all
I have declared my internal table in my program as
data : itab_wa type ZRESULT_LINE,
itab type ZRESULT_ROW.
Where ZRESULT_LINE and ZRESULT_ROW are the structure and table types.
Now I want to add
data: TCOLOR TYPE SLIS_T_SPECIALCOL_ALV.
in my internal table declaration. How can I do this. Please remember I need to have work area and body in my internal table as I have used work area and body in my code.
Waiting..............
Message was edited by: Raju BodaHI,
See the Declarion types of workarea and Internal tables
* Table declaration (old method)
DATA: BEGIN OF tab_ekpo OCCURS 0, "itab with header line
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF tab_ekpo.
*Table declaration (new method) "USE THIS WAY!!!
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0, "itab
wa_ekpo TYPE t_ekpo. "work area (header line)
* Build internal table and work area from existing internal table
DATA: it_datatab LIKE tab_ekpo OCCURS 0, "old method
wa_datatab LIKE LINE OF tab_ekpo.
* Build internal table and work area from existing internal table,
* adding additional fields
TYPES: BEGIN OF t_repdata.
INCLUDE STRUCTURE tab_ekpo. "could include EKKO table itself!!
TYPES: bukrs TYPE ekpo-werks,
bstyp TYPE ekpo-bukrs.
TYPES: END OF t_repdata.
DATA: it_repdata TYPE STANDARD TABLE OF t_repdata INITIAL SIZE 0, "itab
wa_repdata TYPE t_repdata. "work area (header line
you need to maintain same structure for both workarea as well Internal table
Regards
Sudheer -
hi all,
data: BEGIN OF it_summ OCCURS 0.
INCLUDE STRUCTURE yapn_summary.
data: END OF it_summ.
data : wa_demo1 type yapn_summary.
clear wa_demo1.
wa_demo1-sumr = 'hai'.
append wa_Demo1 to it_summ.
WRITE: it_summ-sumr.
its not get output..
i want to display for hai using it_summ.
donot use work area.
how to change it.?
reply me soon,
s.suresh.You can't write out an internal table - you can only write out a line (or components of a line) of an internal table. So you MUST use a work area. If you use OCCURS 0 then you've a table with a headerline, and so don't need a workarea. However, later versions of ABAP discourage tables with headerline, and it is preferred to define a specific work area. So, either:
data: BEGIN OF it_summ OCCURS 0.
INCLUDE STRUCTURE yapn_summary.
data: END OF it_summ.
clear it_summ.
it_summ-sumr = 'hai'.
append wa_Demo1 to it_summ.
LOOP AT it_summ.
WRITE: it_summ-sumr.
ENDLOOP.
Now, you see here that at some points it_summ refers to the table, and at others to the header-line. This is ambiguous, and therefore BAD. It's better to define the table and work area seperately.
data: it_summ TYPE STANDARD TABLE OF yapn_summary WITH NON-UNIQUE KEY table_line.
data : wa_demo1 type yapn_summary.
clear wa_demo1.
wa_demo1-sumr = 'hai'.
append wa_Demo1 to it_summ.
LOOP AT it_summ INTO wa_demo1.
WRITE: wa_demo1-sumr.
ENDLOOP.
matt -
How to compare two internal table and store value in third table
Dear All,
There is two tabel say I_T1 & T2, in I_T1 there are 4 rows , in T2 there are multiple rows against the same field. Say there is a filed X common in both table .
Value of I_T1-X are
10
20
50
90
and value ot T2-X are
10
15
20
30
40
50
.100
Now i want to fetch data form T2 against the common field of I_T1-X and store into other internal table.
Plz suggest me the proper way of doing this.
Rewards points assured for proper answer.
Regards,
Gulrez Alamhi this is like your requirement.
in this i am storing the values into the final table
REPORT ZZZZ000000.
tables:mara,marc,mard,makt.
data:begin of it_mara occurs 0,
matnr like mara-matnr,
mtart like mara-mtart,
meins like mara-meins,
end of it_mara.
data:begin of it_marc occurs 0,
matnr like marc-matnr,
pstat like marc-pstat,
werks like marc-werks,
end of it_marc.
data:begin of it_mard occurs 0,
werks like mard-werks,
lgort like mard-lgort,
labst like mard-labst,
end of it_mard.
data:begin of it_final occurs 0,
matnr like mara-matnr,
mtart like mara-mtart,
meins like mara-meins,
pstat like marc-pstat,
werks like marc-werks,
lgort like mard-lgort,
labst like mard-labst,
maktx like makt-maktx,
end of it_final.
select-options:s_matnr for mara-matnr.
select matnr
mtart
meins
from mara
into table it_mara
where matnr in s_matnr.
if not it_mara[] is initial.
select matnr
pstat
werks
from marc
into table it_marc
for all entries in it_mara
where matnr = it_mara-matnr.
if not it_marc[] is initial.
select werks
lgort
labst
from mard
into table it_mard
for all entries in it_marc
where werks = it_marc-werks.
endif.
endif.
loop at it_mara.
it_final-matnr = it_mara-matnr.
it_final-mtart = it_mara-mtart.
it_final-meins = it_mara-meins.
read table it_marc with key matnr = it_mara-matnr.
it_final-werks = it_marc-werks.
it_final-pstat = it_marc-pstat.
read table it_mard with key werks = it_marc-werks.
it_final-lgort = it_mard-lgort.
it_final-labst = it_mard-labst.
if sy-subrc = 0.
select maktx from makt into it_final-maktx where matnr = it_final-matnr.
endselect.
endif.
append it_final.
endloop.
loop at it_final.
write:/ it_final-matnr under 'material',
it_final-mtart under 'material type',
it_final-meins under 'unit of measure',
it_final-werks under 'plant' ,
it_final-pstat under 'status',
it_final-lgort under 'storage loc',
it_final-labst under 'stock',
it_final-maktx.
endloop.
reward points if useful,
venkat.
Maybe you are looking for
-
How can I re-associate my iPad from an unauthorized computer
I have a friend's iPad, and we are going to transfer the photos from it to my computer before she sells it. I accidentally removed the association from her account (while signed into iTunes - her account), and now need to re-associate it. As I'm not
-
Reinstalling iTunes and getting message "service 'apple mobile device'failed to start.Verify that you have sufficient privileges to start system services"
-
WiFi Sync with iOS 5 doesn't work with Airport Express used as a wifi extender?
So in our apartment we have an Airport base station that doesn't reach all the way to the bedrooms, so we use an Airport Express as a wifi extender/repeater. The Wifi sync doesn't work when connected to the Airport Express. My iPhone and iTunes can't
-
Query is not working cant see result always saying no item found
hi i have created this query to see all systems who have ms word installed on them but its always showing no result other builtin queries working fine but when i create new query its show nothing just no item found i would love if some one help me in
-
Why aren't there tabs in my safari?
Why aren't there tabs for open websites on my safari? Rather than having to click in and out of the open pages window?