Central recording server using MTP at remote

I am getting ready to implement a voice recording solution. We will be using auto recording / RTP forking. We will have centralized recording servers and wish to transcode the G.711 recording streams to G.729 using MTP on the remote site voice gateways. I am trying to calculate the required DSPs for this solution. I can see our current MTP max sessions when I configure the MTP, but I don't know if this equates to a 1 for 1 for recording sessions. There will be two recording streams in the same direction, remote to HQ this includes the agent and customer streams. Does anyone know how many MTP sessions are used per recording session?
I would assume it would be 1 MTP session per normal bi-directional call, but not sure with both streams going in the same direction for the recording sessions.
Thanks,
Mark

I have g711ulaw and g729r8 configured. There is a mix of 2811 and 2911 voice routers. This is a typical config.
Show inventory:
NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 chassis"
PID: CISCO2911/K9      , VID: V02 , SN: FTX1533AN65
NAME: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1"
PID: VWIC2-1MFT-T1/E1 , VID: V01 , SN: FOC15240VK1
NAME: "3rd generation two port FXS DID voice interface daughtercard on Slot 0 SubSlot 1", DESCR: "3rd generation two port FXS DID voice interface daughtercard"
PID: VIC3-2FXS/DID     , VID: V03 , SN: FOC15273DM3
NAME: "3rd generation two port EM voice interface daughtercard on Slot 0 SubSlot 2", DESCR: "3rd generation two port EM voice interface daughtercard"
PID: VIC3-2E/M         , VID: V02 , SN: FOC15297W3H
NAME: "PVDM3 DSP DIMM with 64 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 64 Channels"
PID: PVDM3-64          , VID: V01 , SN: FOC153013MW
NAME: "C2911 AC Power Supply", DESCR: "C2911 AC Power Supply"
PID: PWR-2911-AC       , VID: V03 , SN: DCA1522R1GX
Thanks,
Mark

Similar Messages

SSL Connection over TCP using SSLSocketFactory to remote C++ Server

Hi.
Despite my traversing through the archives, I could not find a
solution to my problem. So hopefully, that would mean i have a simple
isolated, and FIXABLE problem :-)
My web application running under Weblogic 7.01 as a servlet needs to
connect to a remote server using SSL over tcp.
The server is a C++ app using openssl libraries to serve up a
self-signed certificate.
The code fragments to do so look like this:
     SSLSocketFactory sf =
(SSLSocketFactory)SSLSocketFactory.getDefault();
     connection = sf.createSocket(host, port);
     output.write(...)
     output.flush();
Upon the flush, I get the following error:
java.io.IOException: Write Channel Closed, possible SSL handshaking or
trust failure
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown
Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown
Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown
Source)
     at com.certicom.tls.record.ReadHandler.interpretContent(Unknown
Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown
Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown
Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:67)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:125)
     at java.io.DataOutputStream.flush(DataOutputStream.java:99)
My guess is that its complaining about not trusting the certificate
being sent back by the server.
I typically use JSSE for this application when running within other
appservers, and
this application has no problems. But because i've run into issues
with using JSSE in WL7.01 (another topic
for another day), I'm using the default WL ssl library.
I have set weblogic.security.SSL.trustedCAKeyStore=d:\bea\weblogic700\server\lib\cacerts,
and imported my
certificate into that cacerts file. This doesn't seem to fix my
problem. Is there another truststore
that my webapp may rely on? Where within the admin console can I
figure this out?
Or am I on the wrong track here?
Also, if its any clue, elsewhere within the same application, I make
https requests to another
web app running under the same weblogic server - and that is fine - I
use the URLConnection class in those cases.
Any help is much appreciated!
Thanks
Ed

Hi,
Can you show us the stacktrace?
/Kaj

Can I record sound using a microphone and then upload it to server?

Hello guys I thank you in advance for reading this. What I want to know is if it is possible to record a sound clip using a microphone and then upload it to the server using a swf applet in a webpage. Im an experienced java/javascript programmer but just starting out with flash/action script. What technologies will I need to do this? Can I do this simply using simply an swf file and an apache/php or jsp page? Again, thanks alot for your help.
-BeWilled

You can Microphone class in Flash to record the sound and it will directly upload to FMS server .
Use the Microphone class to capture audio from a microphone attached to a computer . Use the Microphone class to monitor the audio locally. Use the NetConnection and NetStream classes to transmit the audio to Flash Media Server. Flash Media Server can send the audio to other servers and broadcast it to other clients running Swf files .
Below link might help you in doing this : http://www.adobe.com/devnet/air/flex/articles/using_mic_api.html

[Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

Errors when deploying application to a remote WebLogic server using Eclipse

I'm using Eclipse with OEPE for WebLogic 10.3.5 on linux and running a weblogic server versioned the same.
I've created a new EAR which combined several EARs that I had, and deployed it on my local server using the 'servers' tab in Eclipse. It went well.
When I tried to deploy the EAR into my remote server, I got the exception:
Application archive not found : myworkspace/.metadata/.plugins/org.eclipse.core.resources/.projects/MyEAR/beadep/remote_weblogic/MyEAR/split_src.ear
This also happens when trying to deploy the EAR to a server that runs on my computer but configured as 'remote' in Eclipse. This does not happen for any other application of mine.
Next thing I tried is to update my Eclipse OEPE and server to 12.1.1, so I've downloaded the two, installed them both as new, and now when I'm looking for remote servers in the Eclipse, instead of writing the server status (republish/synchronized) it writes:
User: myuser, failed to be authenticated
I'm lost. How can I deploy my application with Eclipse OEPE to a remote weblogic server?
Edited by: wafwaf on 02:03 02/02/2012

I'm using Eclipse with OEPE for WebLogic 10.3.5 on linux and running a weblogic server versioned the same.
I've created a new EAR which combined several EARs that I had, and deployed it on my local server using the 'servers' tab in Eclipse. It went well.
When I tried to deploy the EAR into my remote server, I got the exception:
Application archive not found : myworkspace/.metadata/.plugins/org.eclipse.core.resources/.projects/MyEAR/beadep/remote_weblogic/MyEAR/split_src.ear
This also happens when trying to deploy the EAR to a server that runs on my computer but configured as 'remote' in Eclipse. This does not happen for any other application of mine.
Next thing I tried is to update my Eclipse OEPE and server to 12.1.1, so I've downloaded the two, installed them both as new, and now when I'm looking for remote servers in the Eclipse, instead of writing the server status (republish/synchronized) it writes:
User: myuser, failed to be authenticated
I'm lost. How can I deploy my application with Eclipse OEPE to a remote weblogic server?
Edited by: wafwaf on 02:03 02/02/2012

Upload a jar file in remote Weblogic server using wlst

Is there a way to upload a jar file to a specific location on remote weblogic server using wlst? This is my scenario - I need to upload aspectjweaver.jar to the remote server. This needs to be done before weblogic startup, as weaving takes place during startup . FTP is not an option because those ports are blocked

Hi,
You don't have such option through upload files as what FTP do but you can deploy the application through wlst.
eg:
deploy('Web14','C:/TEMP/Web14.war',targets='Cluster1',stageMode='stage',upload='true',remote='true')
Or you can use Deploy option to deploy app directly.
eg:
java weblogic.Deployer -adminurl http://localhost:7001
-username weblogic -password weblogic
-deploy ./myapp.ear -id myDeployment
This will upload file and place the file there from there you can manipulate the file.
Hope this will work for you.
Regards,
Kal

How to use central output server in JSP application

Dear All,
We have developed a jsp application which is running on JBoss.We want to create receipts in PDF format.For this we are using central output server.Our approach is as follows:
When request comes from the user, we are generating .dat file by fetching data from the Oracle database depending upon credentials and then pushing this file into data folder of Central output server.From there we are waiting for PDF file in predefined path.Here we found this is asynchronous way of producing receipts.
Is there any other way that is synchronous or the way we are approaching is the only way of doing it.A sample would be of immense help.
Note:The concurrent hits would be around 5000 in a peak hour.Any help would be highly appreciated.

I don't think you can get things to operate in a synchronous manner. You have one application - perhaps running on a totally separate server - feeding data files to a different application. The only way to make it even semi-sychronous would be to throttle the JSP application in some way to prevent it from placing a new file into Central's data folder while there was already one there.
I assume your problem is knowing which PDF belongs to which user. If that is the case you could send some type of unique identfier (IP#?) as a "job" parameter that would then be used as the specific PDF file name instead of letting Central create a random file name.

Problem in connecting remote server using Applet?

Hello everybody,
I am facing problem in connecting to remote server using Applet in browser. I am using JDK 1.5.0_12 and running the application on apache 2.2.
Firstly I have tried with simple jar file which could not connect to remote server and throws permission denied than now I am trying with signed jar file but also not working. I have changed the java.policy file of JDK in server with grant all Permission but also it throws "java.security.AccessControlException:access denied(java.net.SocketPermission 127.0.0.1:1521 connect, resolve)".
Can anybody suggest me how to solve this problem?
Thank You.
-Ritesh

>
I am facing problem in connecting to remote server using Applet in browser.
Firstly I have tried with simple jar file which could not connect to remote server and throws permission denied than now I am trying with signed jar file but also not working. >Were you prompted to accept the digitally signed code? To see what I mean, check out the [Defensive loading of trusted applets demo|http://pscode.org/test/docload/]. If you are not getting the prompt, or refused it, follow the link to sandbox.html for tips on how to proceed.

Unable to connect to the remote ftp server using dreamweaver.

For the last one week I have been trying to connect to the remote ftp server using dreamweaver. I spoke to the technical support agency who manage our remote server but they are saying that there is no problem with the server adn they dont know anythign about dreamweaver so cant assist me.
I was suggested to check with adobe team directly and i spoke to a technical support person on the live chat but they said since the version is CS4 - education version, they cant assist me at all!! This is just ridiculous...I am constantly being sent from one place to the other without anything getting resolved!!
Please help somebody!!

I am having a similar problem... maybe. I was connected to my remote site all day yesterday, then out of the blue I tried to "put" an edited file... as I had been doing all day, and I received an FTP error: Cannot make connection to host. Your login or password is incorrect. That's odd, I've been connecting all day. So I went into my sites > manage sites and clicked the Test button on my remote server information and it returned Adboe Dreamweaver CS connected to your webserver successfully. I went back to my file and tried once more to "put" it on the remote server... again FTP Error: cannot make connect to host... So I reboot my computer and start Dreamweaver CS3 again. I reenter my remoter server information and click the Test button. "... connect to your webserver successfully". I try to put any file, FTP error again. So I call my server administrator, he checks the servers logs and says there are no errors and you've connected successfully several times today. I went through the trouble shooting steps listed here, though my FTP Logs are empty. I cannot stay connected or even see the remote folders to try to drag and drop. I tried to run ftp from a windows command prompt and it seems to connect me.
I downloaded an installed an SFTP client and was able to successfully connect to my remote server and upload the files. It's definately a Dreamweaver problem. Any suggestions?

I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

Probably. You may be able to use Finder > Go > Connect to server to access the server. You may be able to share folders using Remote Desktop too. Whichever one you like the best.

Recorded old files access in UCCX using Calabrio recording server

Hi
Any help or idea appreciated.
We are using UCCX 7.1.5 and QM calabrio server to have agents calls and their screen shots recorded. The files are being backed up by netbackup to a network cluster. Lately the disk started to be full and no new recorded files are being accepted anymore in the calabrio recording server. The recorded files are all backed up and I need to free some space the disk of the server so that it accpets new recorded files.
Supervisors are accessing the historical recorded files which are sotred also on the calabrio server. I need to know how could I access and let the supervisor access the network cluster to retreive the old recorded files as I need to delete them from the server and have the supervisors to access them from their backed up locations.
Can I have any suggestion here please
Right now I am getting the following errors on the calabrio server due to space limitation on the disk
of Error QM2000 which means that the server reached his HDD space threshold and does not take any calls from Desktop PCs until space is cleared up.
Abdul
Thank you

I probably have asked a stupid question.
My recorded streams are still saved in the applications/appName/streams folder.
And I redirect the www.mydomain.com/streams to point to the applications/appName/streams folder.
And the rmtp recorded streams are abled to connect through http now.

Unable to use PerfMon for Remote Server

I have a Windows Server 2008 R2, which I am running PerfMon. When I try to connect to a remote Windows 2008 server, I receive: Unable to connect to the remote computer with the following error: The Parameter is incorrect.
I can, however, connect to this server with other snap-ins, such as Services and Users and Groups. Furthermore, I can connect to the server using PerfMon from my Windows 7 client.
Any I deas why PerfMon won't work from my R2?
Thanks,
Matt

Hi,
Does it work the other way around? Can you connect form the 2k8 to the 2K8 R2 server?
Best Regards,
Spas Kaloferov
MCITP: SA7 | EA7 | VA7 | EDA7 |DBA10 | DBD10 | BID10 | EMA14 | SPA14
NetShell Services & Solutions | “Design the future with simplicity and elegance”
www:
www.spaskaloferov.com
| www:
www.netshell-solutions.com

Remotely starting the CMS server using a SSH script in a Unix environment.

Is it possible to remotely start a CMS server using a shell script which starts an SSH session and runs the startservers command asin the command below:
ssh -o ConnectionAttempts=2 -o ConnectTimeout=10 -l boadmin huxd0226 '/opt/BO/boxir2/bobje/startservers'
The command securely logs into the server (huxd0226) and runs the command described in single quotes.
the CMS server actually appears to start but then dies inexplicably and displays no errors in the trace logs. The full log file is displayed below:-
Timestamp ProcessID ThreadID Message
Thu Sep 18 10:59:05 2008 913548 1 (wireobinit.cpp:97): trace messa
ge: Creating the shared CWireObject::PropertyNameMap
Thu Sep 18 10:59:05 2008 913548 1 (wireobinit.cpp:119): trace mess
age: Setting static property map
Thu Sep 18 10:59:05 2008 913548 1 (wireobinit.cpp:126): trace mess
age: CWireObject::InitializeStaticPropertyMap() - reference count: 1
Thu Sep 18 10:59:05 2008 913548 1 Log: level=3 cat=1 msg=35100 p=C
entral Management Server started
Thu Sep 18 10:59:05 2008 913548 1 trace message: SIServerControlle
r::run: Before initialize
Thu Sep 18 10:59:05 2008 913548 1 (sidaemon.cpp:416): trace messag
e: SUNIXDaemon::init: starting
Thu Sep 18 10:59:05 2008 913548 1 trace message: SUNIXDaemon::init
: redirecting stdio to /dev/null
Thu Sep 18 10:59:05 2008 913548 1 (sidaemon.cpp:209): trace messag
e: installing fg terminiation handler
Thu Sep 18 10:59:05 2008 913548 1 (sidaemon.cpp:220): trace messag
e: installing abnormal sys handler
Thu Sep 18 10:59:05 2008 913548 1 (sidaemon.cpp:506): trace messag
e: SUNIXDaemon::init: finished
Thu Sep 18 10:59:12 2008 913548 1 trace message: GetClockSequenceU
pdater: Getting clock sequence updater
Thu Sep 18 10:59:13 2008 913548 1 trace message: SSimpleBuffer::lo
adFromFile: calling mmap(): fileName[/opt/BO/boxir2/bobje/enterprise115/aix_rs60
00/sqlrule.llr], lFileLength47132, fd10
Thu Sep 18 10:59:13 2008 913548 1 trace message: SSimpleBuffer::lo
adFromFile: calling mmap(): fileName[/opt/BO/boxir2/bobje/enterprise115/aix_rs60
00/sqlrule.dfa], lFileLength26824, fd10
Thu Sep 18 10:59:14 2008 913548 1 trace message: Loading: database
subsystem: db2databasesubsystem
This is exactly the same as a normal manual startup of the CMS server except it dies at the loading of the db2databasesubsystem section.
Business Objects is patched to Fix Pack 3.6 and is clustered in a HACMP environment. It is a requirement that when the DB2 database fails, shortly after restarting it can automatically start the Business Objects services remotely.
SSH will work if the command is entered manually from within a secured session, but it is only when automated that the failure occurs. Does anyone have an idea on why this is happening and whether it is in fact possible ?

we're going to run into deep offtopic if we continue that line ))
But I believe there is a big push to get the forum format actualy working this time.

How do I copy a file to a remote server using runtime exec - plz Help!

Hi,
I am trying to copy a file to a remote server using a runtime exec command as follows:
Runtime.getRuntime().exec("scp "+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_JAR)+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_JAR_NAME)+".jar "+" "+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_TWO_USERNAME)+"@"+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_TWO_URL)+":"+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_TWO_JAR));
Problem is this statement does not execute, as when I try it directly on command line, it requests for a password. Any suggestions on how I can get rid of that? I think I might have to configure my ssh_config file, but when I did some "Googling", I found the configuration settings of a ssh2_config file. I tried those (changing it to Host-based Authentication), but it didn't recognise them. Please help, this is so urgent!
Regards,
Simz

Don't use Runtime.exec (or ProcessBuilder) for this. Check out JSch at JCraft (or some other Java SSH API.

CS6 Dreamweaver using PHP & MySQL - Delete Record Server Behavior?

When I try to insert the Delete Record server behavior. I get an error message about a DeleteRecord.js file, which seems to be missing or defective. I cannot use the server behavior. I have a file that I developed using CS5, and it does indeed delete the record, but does not proceed to the destination I want. I cannot change that except in the server behavior, so I'm stuck. I have noticed that server behaviors seem to disappear without apparent cause, as it seems to have in this case. I will appreciate any suggestions! Is there any way to embed a call to a target page manually? All is working WITHOUT the server behavior appearing, but I want to go to a confirmation display page that shows the record is indeed deleted, and we just return to the (now blank) delete confirmation page. That'll drive a user bonkers!
Thanks!
Delete Record in CS6 Dreamweaver using PHP & MySQL?

Well, your error message is self-explanatory.
DW stores ServerBehaviors in 'Configuration' folder in installation directory. If one of the behavior JS files is missing/ corrupt, you'll see the error message you just did.
I've uploaded a functional, proper version of DeleteRecord.js onto my site for you to download. Here's the link:
http://www.sudarshan.me/adobeforum/dw/app/behavior-js/DeleteRecord.zip
Download this file, extract it and put DeleteRecord.js file in your installation directory as follows. If prompted, 'replace' your local copy:
Mac: Applications > Adobe Dreamweaver CS6 > Configuration > ServerBehaviors > PHP_MySQL
Windows: C:\Users\Your User Name\AppData\Roaming\Adobe\Dreamweaver CS6\[language]\Configuration\ServerBehaviors\PHP_MySQL
It should work as expected.
If that still doesn't solve the problem, reset your DW preferences and cache and try doing it. Follow the instructions here to reset cache: http://forums.adobe.com/thread/494811
Let us know how it goes.
-ST

Central recording server using MTP at remote

Similar Messages

Maybe you are looking for