Central Sales Tax

hi all
what is the central sales tax....
i want made a report of CST in FI which table i want to use.....

Hi,
Refer report J1I2 - Sales Tax Register
Here in the selection screen, enter Tax code, CST Condition type, etc...
Also refer report S_ALR_87012357 - Advance Return for Tax on Sales/Purchases

Similar Messages

Central Sales Tax Amount with respect to Purchase Orders

Is there any way to get Central Sales Tax amount with respect to Purchase Order Numbers. I need this for report.
Pls get me table numbers from which i can extract

Hi,
Refer report J1I2 - Sales Tax Register
Here in the selection screen, enter Tax code, CST Condition type, etc...
Also refer report S_ALR_87012357 - Advance Return for Tax on Sales/Purchases

Condition record of JIVC ( Central Sales tax) is not getting picked up

Dear All,
I have maintained the Central Sales tax condition type as JIVC and assigned a standard Access Seq. JCST.
While creating a condition record, under key combination :
Country/plant region/Region/Taxclassification1 Cust./Taxclassification Matl
I have entered :
Country : IN
Plant region : 06
Region : 13
TaxClassification1 Cust: 1
Taxclassification Matl : 1
For this combination i have set the Condition record as 2 % and the tax classifications ( as above) has been maintained in respective Cust & Matl masters .
The Sales tax code is used as Output Vat ( A0).
The condition JIVC is properly maintained in the Pricing procedure as well as in OVK1, OVK3,OVK4.
Inspite of all this after creating a sales order, the condition JIVC is not appearing in a pricing procedure. Why ?
Kindly throw a light on this.
Thanks & Best Regards,
Pankaj Kalbande
09924090616

Hai
Check ur Plant Region in Plant - Address Fields
and then check ur customer master address field for region.
for this two regions if ur maintaining a condition record, then it will be taken in sales order.
The key combination for the condition type is
Country, Region for deliv. Plant and Region of customer etc...
I think this answer will solve ur problem.
If u feel good give points.
Subramanian Ramasamy.

Central sale tax

For the CST CHANGE FROM 3% TO 2% what are the setp to be followed for TAXINJ Procedure

Hello,
This will effect from the next GR. Before making changes just ensure that all invoice verifications are done for the old GRs (related to 3%CST).
Regards

Sale tax setoff

Hi experts
Wt is mean by sale tax setoff and how it is working in SD process.
Regards
Ishikesh

hi
There are two types of taxes, Tax on sale or purchase within the State (Local Sales tax i.e LST) and Tax on sale or purchase in the course of interstate trade (Central Sales Tax i.e. CST).
Set-off is the amount of tax credit which can be claimed in the LST return. It is the tax that you have been charged on goods that you have purchased for your business. This credit can be adjusted against the LST payable on your sales, and the balance of LST has to be paid to the Government. Set-Off is claimed on monthly basis.
In FB50 you can post the set off
On the initial screen, enter the Document Date, Doc.Header Text, enter G/L Accounts of LST Receivable, Payable & Bank in u201CG/L acctu201D Column, Select u201CDebit or Creditu201D indicator like LST Payable as Debit, Receivable & Bank as Credit, in u201CD/Cu201D Column, enter amount in u201CAmount in doc.curr.u201D against each G/L account and press Enter , Check for Total deb. and Total cred. In Amount Information , ensure that the indicator is turned as Green . Click on Details tab, to check the details . Click on Simulate button, check the details and Click on Save button.
LST Set Off Document JV is generated.
regards

Calculation of sales tax for free item

Dear SAP B1 Experts
I have query regarding sales tax calculation for free item .
For EG. I have two item for sales (A = 1000, B = 100)   Sales tax is VAT4%
But when i am doing sales, i am selling B for free of cost with A for Rs 1000/-
here my tax calculation is (1000 *4%) = 1040/-
but as per the govt sales tax rule, we are liable to pay the tax for free item as well
So I this case, In SAP B1 how we will calculate the tax 4% for free item .
Please help me.
Thanks

i have checked, its working okay, but
in Invoice print out unit price and line total is showing for free item. How i make the unite price 0 .
Tax only calculation is based on the Line total and the line total is based on the unit price.
in that case when i give the invoice to the customer.
It should show like this
Item A       100   * 10         1000
"    B           0   * 1              00
                                         1000
4% tax                               44
Doc Total             =           1044
thanks
Regards

Free Goods -Sales tax

Hi,
I am working on Free Goods determination.
The ultimate aim is to capture excise duty and sales tax for materials which is sold as free to customer.
I could able to capture excise duties,whereas it is not charged on customer.
I could able to sales tax,whereas it is t charged on customer.
Only problem i face is for item category TANN ,tax value should be zero (o) means at the time revenue account determination it should not post to customer account .How can i configure it.
I tried with various options but i could not make it.
I thought of generating report keeping in the mind that where ever the condition type R100 >0.01,system should find out the value for sales tax VAT /CST.
Based on that value credit note have to raised for customer.
Here in our case Rs 2.93/- should be issued as credit note.Is there any other alternative option available.
Thanks,
Pradeep M

We are using the below one.
IF komp-PSTYV = 'TANN' OR komp-PSTYV = 'RENN' .
     IF XKOMV-KSCHL = 'JIVP' OR XKOMV-KSCHL = 'ZCES' OR XKOMV-KSCHL = 'JIVC'.
       XKWERT = 0.
     ENDIF.
     IF XKOMV-KSCHL = 'ZBPF' OR XKOMV-KSCHL = 'R100'.
       XKOMV-KSTAT = 'X'.
     ENDIF.
ENDIF.
ZBPF is our basic price
Regards
Jobi

A/R Installment Payments with Sales Taxes and Freight in 1st payment

Our sales dept. wants to offer our customers Installment Payment plans (6, 12, 24 mths) for product sales which is easy enough to set up using Payment Terms and the Installment Payment flag.
But our Accounting Dept wants to collect the Sales Taxes and Freight "up front" in the first payment.
We do not want to use Milestone billing since Accounting wants to recognize the revenue of the sale during the month of the sale ... so a single Invoice to the customer with the Payment Plan printed on the invoice is the option they want done.
I have not been able to find any way to set up the Installment Plan configuration to do such a thing. The Terms of Payment refer to the total Invoice amount.
Has anyone here be able to accomplish such configuration (without doing custom coding in a User Exit)?
Example: $60,000 item, %5,000 tax, $100 frieght = $65,100 total invoice. (6 month payment plan)
   Payment #1 = $15,100
   Payment #2 = $10,000
   Payment #3 = $10,000
   Payment #4 = $10,000
   Payment #5 = $10,000
   Payment #6 = $10,000

I have already set up the installment plan in OBB9 with 6 entries (1 - 6) for my IP Payment Term of IPM1. I have the percentages setup as 16.67 for each of the installments and the last set at 16.65 (equaling 100%).
The problem with Sales Tax and Freight is that you can not simply assign an arbitrary percentage to the 1st installment (for example make the 1st installment 25% and break up the remaining 5 installments fromt he other 75%).
We need to make sure that the first Installment from the customer is for the Sales Tax, the Freight, and exactly 1/6 of the material cost (if it is a 6 month payment plan).
I have activated User Exit EXIT_SAPLV60B_007 to intercept table generation of the installment plan that is sent to Accounting to fix this problem. Now the Accounting document connected with the customer invoice is correct. My next step is to fix the SmartForm print of the Installment Plan on the customer's Invoice.

Conditions in Purchase Order - No scroll bar/Sales Tax value not in mmr

Hello,
I am stuck in a weird problem where I have created a Condition Calculation Schema, assigned it to Schema group and assigned that schema to vendor, but when i open my condition in the PO, it does not give me scroll bar i.e. I have calculation Schema with around 10+ conditions, but when I try to put all the conditions in PO at one time, the scroll bar doesnot come up and without it, I cannot view all my conditions in the PO. Its saving the conditions though as seen in report, but cannot display it in PO without the scroll bar. Any ideas?
Another assignment is that sales tax value and % should not increase the mmr value at time of GR, but when I do GR its adding the sales tax value to mmr value, my requirement is just Gross price be added to mmr, not sales tax value/%. I tried the Statistical checks in Calculation Schema, but to no vail, at GR the sales tax value is being added to the mmr record. Any ideas?
Lots of points awarded for answer/answers.
Any clue will help
Thank you/Afshad
Edited by: Afshad Irani on Jan 14, 2009 10:27 AM
Edited by: Afshad Irani on Jan 14, 2009 2:32 PM
Edited by: Afshad Irani on Jan 15, 2009 6:19 AM

Q Another assignment is that sales tax value and % should not increase the mmr value at time of GR.
Ans:
Dear Afshad,
Reference to your question, you need to do few settings in your Condition Type and Pricing Schema, if you need Sales Tax value & % not to include in your Material value.
1 - In SPRO, Check that in your condition type, Control data 2 tab, Accruals check box should not be selected.
2 - In your Calculation Schema, against your condition types for Sales Tax % and Sales Tax Value, select the check box for Manual & Statistics.
3 - Also in your Calculation Schema, you should not select any account key in AccKey (Account Key) and in Accruals colomns.
If any one of these setting is not defined, the valuation price for your material will be increased due to the fact that your settings for Condition type and Calculation Schema is allowing the same to hit the value of your material directly.
Hope it works for you.
Regards
Jibran

Need to change sales tax from point of sale to point of delivery

Hi all,
Recently the tax laws were changed such that sales tax is to be collected based on where the product will be delivered to (rather then where the product was sold from).
Briefly we are an agency with mulitiple divisions, and within those divisions several sales offices. Previously, a sales would be made from the sales office, and based on the tax rate for that division and sales office (county/city) the sales tax would be calculated.
Now we need to shift that so that a sales can still be made from a division/sales office, but the collected tax is based on where the product will be delivered to.
I'm sure there is a way to set this up, but I'm at a loss as to where to start.
One of teh options the customer suggested was to have a sales area set up with all the cities and tax codes in it. Then assign that sales area to each of the sales offices. Is this possible? Or do you have to have a separate sales area for each sales office?
I'm open to any suggestions you may have as I'm not very familiar with this side of SAP (sales distription and taxes).
Thanks in advance for your thoughts!
Laurie

Thanks Bill. As it turns out, we are in the US where jurisdiction is an option I guess so this procedure may not be needed. As I dig further it appears we are currently setup to use TAXUS procedure which utilizes tax codes - a limited number. But since the recent change, we may need to switch to TAXUSJ.
Does this ring a bell for anyone? If it is what we need to do, what need I be aware of that will change in the rest of the system?
Thanks for your answers so far!
Laurie

Excise invoice and sale tax applicable in consignment process

Hi,
How excise invoice and sale tax applicable in consignment process in below stages--
in consignment fill up,consignment issue,Return andpickup
Regards
Ishikesh

Hi,
You have to pass JV for 50 picked up items through J1IS. For this you have to create new subtransaction type type and accordingly maintain the G/L in the tax on goods movement settings for acoount determination node.
Regards,
Sagar Wairagade

Excise and Sales Tax/VAT related notes.

Hi,,
Can anyone provide me notes on Excise and Sales Tax/ VAT related issues(Pricing Proc/Condition Types/Sceanrios etc) at my mail id [email protected]
Regrds,
Binayak

Hi Pratap,
For free goods you have to pay excise duty, that is why i recommend you to follow a new pricing procedure, where the Price Condition type is statistical(to calculate excise) and give payer as self if the excise duty you would not get from customer,\
1.Create invoice and excise invoice.
2. If you don't want to to hit self(given in document header partner) create proforma and excise invoice
revert if you require any clarrification.
regards.

Error while executing sales tax report S_ALR_87012394

Hi,
I am getting the below error while executing the sales tax report S_ALR_87012394.
Infomration: I have maintained the tax jurisdiction code 9 digits initially.after that i have maintained with 10 digits
Tax jurisdiction LA0000000 has defective structure
Message no. FS790
Diagnosis
When calling the GET_JURISDICTION_LEVEL_TTXD function module, a tax jurisdiction code was transferred which does not correspond to the structure specified in the table.
Procedure
Check the calculation procedure for the company code and determine the respective tax jurisdiction length and structure in Customizing. Check that the tax jurisdiction code transferred corresponds to the tax jurisdiction length and structure.
kindly help me
Thanks
Supriya

check is there any notes which you have to apply to correct already posted entries with 9 digits. because of this its generating this error

Sales tax Diferential adjustments in credit/debit memo instead of F-02

Dear All
While creating Sales order we have maintained sales tax percentage instead of 4% we haved maintained 12%. and delivery and billin also been done. after all FI posting to AR we came to know that we have maintained sales tax % wrongly, Now we need to
rectify this sales tax enty only. Is it possible thoruh Creditt memo process and differential amount should be post to subsequest accounts automatically instead of adjusting though FI side manually. Kindly suggest me how we can rectify through SD flow
(both rectification entry for Sales tax and customer value adjustment)
Kindly do the needfull

Just for information, check following SAP Notes, these may assist you in understanding:
- Note 542862 - FAQ: Country Version India (CIN) General MM queries
- Note 952441 - CIN: General Clarifications for CIN - SD
- Note 535616 - FAQ: Country Version India (CIN) General SD queries
Also, refer following thread:
- Credit Memo for Tax
Thanks & Regards
JP

Unable to remove/change sales tax in sales order

Hi Sappers!!
I are unable to remove sales tax from a sales order. I have tried to update the sales order by clicking on Header>Conditions Tab>Update-->Double click on G to redetermine the taxes.
The sales order was entered the same day the Vertex record was input.
Appreciate your pointers and time!!

Hi,
If you want to remove the sales tax from sales order,
first of all goto FTXP, give the country, for which you want to change the tax code percentage, and give the tax code and press enter, there it will show existing the tax percentage for that condition type (say earlier it was 10%). Now you want to make it 0% then remove 10 and put it as 0 and save it.
Next goto condition record VK12 maintaine new tax percentage which you want to change. Like earlier 10% was there but you want to make it as 0%, then maintaine in VK12 tax condition record.
Now goto your sale order in change mode VA02, and update the procedure using G, then the new tax willbe reflected i.e., 0% will come.
Hope this is clear
Reward if helpful
Thanks
Praveen

Central Sales Tax

Similar Messages

Maybe you are looking for