Centro has to be paired with bluetooth each time before i can use it
i have a at&t centro and a motorola h700 bluetooth which is on the compadibility list online. i pair my bluetooth just fine and it goes on my trusted list. my problem is that after awhile usually overnight my bluetooth device(the h700) disappears and i have to re-pair it everyday and sometimes multiple times a day. this is a real pain and becuase of this i got a ticket for using my phone while driving because i couldnt answer my phone becuase with my bluetooth becuase it was once again missing from my trusted devieces list.
is there a software update for this or something i can do to solve this problem. i am getting really frustrated with this palm phone. at&t told me this centro has many bluetooth problems and most people hate them and are getting different phones.
Post relates to: Centro (AT&T)
Esmth517 wrote:
i have a at&t centro and a motorola h700 bluetooth which is on the compadibility list online. i pair my bluetooth just fine and it goes on my trusted list. my problem is that after awhile usually overnight my bluetooth device(the h700) disappears and i have to re-pair it everyday and sometimes multiple times a day. this is a real pain and becuase of this i got a ticket for using my phone while driving because i couldnt answer my phone becuase with my bluetooth becuase it was once again missing from my trusted devieces list.
is there a software update for this or something i can do to solve this problem. i am getting really frustrated with this palm phone. at&t told me this centro has many bluetooth problems and most people hate them and are getting different phones.
Post relates to: Centro (AT&T)
As of this date, there are no updates for the AT&T Centro.
Is this your first Palm device? If not, did you upgrade according to Palm's guidelines? Files from older devices can cause problems on newer Palm phones if installed accidentally.
Is the Moto H700 new?
I'm assuming you paired it by going through the Bluetooth Icon/Setup Devices/Handsfree Setup routine, correct?
Any phone-modifiying software installed on it that could be causing a conflict?
The BlueTooth works fine on my Centro (though the lack of Voice Dialing via BlueTooth is sorely missed) - I'm surprised "at&t" told you it has "many bluetooth problems and most people hate them..." Two million people who bought them all hate them???
WyreNut
Post relates to: Centro (AT&T)
Message Edited by WyreNut on 09-03-2008 10:01 AM
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Similar Messages
-
I have my mail set to retrieve data manually. When I retrieve mail, I get a popup box for each and every e-mail message asking if I want to view or cancel and must either view or cancel each one before I can use other apps on the ipad. How can I turn these popups off?
Try reset iPad (not Restore)
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Hello,
My iPad 2 has never been "paired" with any PC. My one and only PC is corrupted and will not, after many many attempts, download iTunes. When I turn on my iPad it insists that I connect to my iTunes. How can I avoid this and just get the iPad to work like normal? Any help is much appreciatedYou cannot do anything with the iPad until you do as instructed by the iPad and connect to iTunes on a computer.
You probably need to restore the iPad and the only way to do that is via iTunes on a computer.
Take it to an Apple Store and ask for help at a Genius bar or take it to a friend's house that is running iTunes on their computer and try to restore it.
You will lose all of your data and settings now because you never backed the iPad up in the past. -
IPhone6 won't pair with BlueTooth on MBPro
IPhone6, iOS 8.1.1 won't pair with BlueTooth on MBPro nor can I use it as Blue Tooth "hands free" device in my car. Blue Tooth is enabled on the phone and on the MBPro. I try to "connect to network" on the iPhone, using BT preferences on the MBPro, but get the message "can't connect" . On the MBPro, have gone to Sys. Pref., Network, can see the phone but again get the same message when I try to connect.
On the phone under the green button (which enables) the BlueTooth, I see the word "other devices" and a spinning beach ball as the phone tries to find additional devices but no joy.
Have Googled the problem, am reading similar issues - people seem to think it was the new iOS 8.0 and 8.1.1 was supposed to be a fix but it isn't. Any thoughts out there would be much appreciated.Great - finally got our iPhones6 "discoverable" on our car. Whew!!! Thank you so much.
But, still can't pair our iPHone with my MBPro. Follwed directions on your link but no joy....<sigh>
The MBPro does NOT find the iPhone device. Don't know why......
However, the biggest problem is solved, hopefully.....that being the car/phone connection.
Appreciate the assistance.
thx -
how do I pair with bluetooth on my car
What problems are you having? Did you follow the directions that should be in you car owners manual?
-
ipad mini going disabled on first correct attempt at passcode. Has happened three times. had to restore with iTunes each time. Is this one a dud?
Does the screen respond properly to your typing? If it handles other typing correctly, leave the passcode off and see if it wakes and works properly.
If it has problems with recognition of typing, take it to an Apple store genius bar and have the techs check it out. -
A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?
Setup for remote app: http://support.apple.com/kb/ht1947
Specifically:
Set up Apple TV (2nd and 3rd generation)
On Apple TV, select Settings from the main menu.
Select General > Remotes > Remote App. If Home Sharing isn't set up on your Apple TV, you should turn it on.
Apple TV (2nd and 3rd generation) uses Home Sharing to stream content from your iTunes library on your computer to your HDTV. If you connect your Apple TV to your iTunes library using Home Sharing, you can use Remote to browse and play content from any iTunes library in the Computers section of your Apple TV. You can also use Remote to select between available speakers to enhance your audio and video experience. -
My daughter's iPad is backing up to my iCloud, which is how we set it up originally. Now she has her own iPhone with her own iCloud. How can I get her iPad to back up to her own iCloud? Her iPad is taking up 3.4MB of my 5MB. I need my space back!
kat...mom wrote:
I suppose ya. If she deletes my account from her iPad it won't affect my account, right?
Yes, that's correct, it won't affect your account or your devices in any way.
Use the delete account button in the iCloud settings.
Then enter her iCloud details in the new screen that appears and log in. She should then be returned to the screen above but with her Apple ID at the top, enable the services she wishes to use and then tap the storage & backup option and ensure that iCloud backup is turned on.
settings -
I recently upgraded from an Iphone 4S to 5. I am having trouble with magicjack; each time i install it it gives me an error message "The installation associated with this device is invalid". Cannot seem to access account info or make calls.
I have exactly the same trouble.
If you wet the answer, please let me know!! -
Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else... -
My bookmarks suddenly are not accessible. Each time I try to use a bookmark, the following message comes up on the error page: The requested URL /exec/obidos/subst/home/home.html/103-3592028-6560639 was not found on this server. The page error is identified as "ERROR 404" I tried a clean install of the latest version; no luck. looked at plug-ins & add-ons; no luck
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian -
My Avast antivirus is telling me it blocks "JS:Iframe-DPX[Trj] Infection" each time I go to use Mozilla. I have removed and reload Mozilla but still get the message. Can anyone tell me how to remove this virus that apparently has attached itself to Mozilla. Thanks Bill
Hi jscher2000,
No avast does not give any hint of where it is coming from all it does is try to get me to upgrade which of course costs money.
I went into avast and found a "browser cleaner" I ran that and it seems to have solved the problem, at least when I got out of mozilla and back into it no warning message came up so hopefully problem solved. Thanks for your advice. -
Pup up sound each time changing application or using key pad
Ipad 2
Pup up sound each time changing application or using key padThe problem is obviously due to the replacement ribbon and not something we can help you with here. Only thing I can suggest is to bring it back to the repair shop that replaced the ribbon and get them to sort it out.
-
I forgot my password to my ipod touch and locked it out. It told me to connect to iTunes and I did. I put it in recoery mode and started the 5 hour download of the restoring process. I tried it many times it always ends up stopping and an error occurs. Now iTunes is telling me I have to put in my password for my ipod before iTunes can use it and recognize it. But my ipod is still telling me to connect it to iTunes and I just want to restore my ipod.
Try Recovery Mode a few more times.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
If I bay time capsule, I can use ma tv with smart tv and wi fi to watch my films on capsule?
If I bay time capsule, I can use ma tv with smart tv and wi fi to watch my films on capsule?
No. Smart TVs can't use AFP to connect to the TC. Although, it might help to know what your smart TV actually is (i.e. model number? Make?)
Maybe you are looking for
-
Macbook slows down at the same time every day.
I know this makes me sound crazy, but my Macbook (running Mac OS X) starts to get inexplicably sluggish at the same time every day – roughly between 4:30 and 5 p.m. Applications start temporarily freezing up and I get that beachball-looking thing, an
-
Problem Deploying Web Service.
Hello All, I am trying to deploy a Web Service however when I am doing so I keeping getting this exception any idea what could be wrong: 5056bf5661#SAPEngine_Application_Thread[impl:3]_130##0#0#Error#1#/System/Server#Java#deploy_5029##Exception in op
-
Using struts-faces : can't find "forward".
using struts-faces : can't find "forward". I download the struts-faces lib and want to make a integration with struts && JSF. The action's one method is executed, but after that, it can't find the forward page. The console display: // Here is the ini
-
This has to do with remembering password option.
This has to do with remembering password option. I think my wife checked of "Never for This Site" by mistake, for her yahoo mail login. Is there a way to fix this? Note, I know that it works because I've been getting the remember this password option
-
Is Microsoft going to offer a Software update with added functionality for Kin Twom?
Considering how blatant the omissions of a way to back up contacts, sync a calendar, or write/store notes are on the Kin Twom, does anyone know if Microsoft plans to update the software on the phone?