Certen user is not able to create the sc using sepecific vendor
Hi,
User is not able to create the SC entering specific vendor .
This vendor is in maintained in SRM for one pur.org (I have checked in PPOMA_BBP).
Then why he is not able to creating the sc using this Vendor
whether user is belong to same region of the Vendor or different. Is there any enhancements you have like that.
Please check those things.
Hope this will help.
Thanks
Venkatesh P
Similar Messages
-
Users are not able to create POs from PRs having Production Order (F)
Hi Gurus
Users are not able to create POs from PRs having Production Order (F) as creation indicator.
Whenever we are trying to convert the PR to PO we are getting the error message "Requisition has different doc. type NB and item cat. >&<" based on the below OSS# 938154 condition for the creation indicator type F.
Would you please investigate and advise what OSS notes are required to be able to use item category L (subcontracting) on a PO for a requisition generated from a network activity via Procurement Type = "Preliminary requisition for WBS element".
Thanks,
Sada.Hi Ajay & Andra
Whenever we are trying to convert the PR to PO we are getting the error message "Requisition has different doc. type NB and item cat. >&<" based on the below OSS# 938154 condition for the creation indicator type Production order (F).
Our Business requirement as shown below.
1).The problem - we currently have no way to "direct requisition" an item to be procured via subcontracting - only itu2019s possible via MRP.
2).These behaviors are inconsistent as the requisition process should not impact the procurement process. Can we find a way to influence the creation indicator on the requisition so that it does not appear as a production order?
Please suggest any alternate method for achieving this.
Thanks & Regards
Sada -
User is not able to find the receipt to correct it from Iprocurement.
User is not able to find the receipt for PO to correct it. User logged into iProcurement and queried for this PO but system says no data exists.
I checked there is a receipt for this PO and the same can be queried in Correction window through core APPS.
Could you please help why its not available in iProcurement for correction.
Thanks in Advance,
AVNAre you logging into right organization (OU) to check the receipts?
Check your ship to location in PO and then based on that change your organization (through responsibility or change organization) then query yur receits, it should come.
BTW for receipts to be seen, the PO lines should not be in "CLOSED" status!
Jithendra -
Not able to change the password using FNDCPASS
I am not able to change password using FNDCPASS. I am getting follwoing error while executing following command with APPLMGR user ( before that I have source the .env file ) (OS-Linux)
[applmgr@ora11 /]$ FNDCPASS apps/apps 0 Y system/manager SYSTEM APPLSYS WELCOME
Log filename : L2741743.log
Report filename : O2741743.out
APP-FND-01630: Cannot open file L2741743.log for appending
Cause: FDPFOP encountered an error when attempting to open file L2741743.log for appending.
Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
Can some one pls guide me on thisDuplicate post-
Not able to change the password using FNDCPASS
Please post only once.
Thanks, -
Ldap Sync: User is not able to create in Active Directory through OIM
Hi ,
I have enabled the ldap sync between OIM and Active Directory.
Option 1: with password
While creating the new user in OIM , I am getting the below error .
80eeb34d89d5ed80:18bc05bb:1403be9d7e6:-8000-000000000008f710,0] [APP: oim#11.1.2.0.0] Could not modify entry.[[
javax.naming.OperationNotSupportedException: [LDAP: error code 53 - 0000001F: SvcErr: DSID-031A120C, problem 5003 (WILL_NOT_PERFORM), data 0
remaining name 'cn=ADTESTLDAp10F ADTESTLDAp10LL,cn=Users,dc=cgtest,dc=adtest,dc=com'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3140)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:3013)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2820)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1458)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:255)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:172)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:153)
at oracle.ods.virtualization.engine.backend.jndi.ConnectionHandle.modify(ConnectionHandle.java:301)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.modify(BackendJNDI.java:781)
[2013-08-04T17:06:58.840-07:00] [oim_server1] [ERROR] [OVD-60600] [oracle.ods.virtualization.engine.util.ADUtilities] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 80eeb34d89d5ed80:18bc05bb:1403be9d7e6:-8000-000000000008f710,0] [APP: oim#11.1.2.0.0] Cannot set password : LDAP Error 53 : [LDAP: error code 53 - 0000001F: SvcErr: DSID-031A120C, problem 5003 (WILL_NOT_PERFORM), data 0[[
Looks like password is not able to set properly. But I am able to create the same user in AD using the same password.
Option 1: without password
Another testing, I have also tried to create user without password. There is no error coming to log file. and I am able to see the below message in log file
oracle.iam.ldapsync.impl.eventhandlers.user.UserCreateLDAPPreProcessHandler] [APP: oim#11.1.2.0.0] [SRC_METHOD: createUser] User created in LDAP with GUID 9dc8f6f4b8564216a5d75d86f7cad0a2
But user is not created in AD . this is another issue.
Thanks,
AmitThanks for your reply.
I have seen sample xml and my target looks the same
<wlserver dir="${weblogic.domain.dir}"
port="${weblogic.domain.admin.server.port}"
servername="${weblogic.domain.admin.server.name}"
username="${weblogic.domain.admin.user}"
domainname="${weblogic.domain.name}"
password="${weblogic.domain.admin.password}"
configFile="config.xml"
generateConfig="true"
action="start"
beahome="${env.BEA_HOME}"/>
my requirement is to use ant task.. otherwise I am able to create through configuration wizard
Thanks -
Not able to create the purchase requisition for the subcontracting process
Dear Gurus,
There is a process order with the component which is to be handled in the subcontracting .Earlier we are able to create the purchase requsition with the creation of the process order .But recently I am not able to do so .I am getting the "The value of the field Reservation/Purchase requsition as Never" .I have checked with the settings in the procurement type in the MRP2 view of the material master which is "X" ,the validity of the outline agreement and contract which is OK.Can you please help on this.Hi Venkata,
Check this links:
http://help.sap.com/saphelp_nw70/helpdata/EN/84/0cb892edfbc34290c1685132006662/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/58/54f9c1562d104c9465dabd816f3f24/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/f3/914f3445194d468f652d45494230b1/content.htm
Which database and OS is your BW server on? Not all of them are supported for SQL server
Hope this helps.
Regards,
Diego -
Not able to create sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
Hi Experts,
I am not able to create sales order . I am using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
to create sales order .I am passing external sales order number to the parameter
SALESDOCUMENTIN.
I am getting following error.
"524 |Only quantity 1 EA is allowed (Item 00001"
Here EA is UOM(Unit of measurement).
Below is the sample program through which i am trying to create the sales order.
*& Report ZSDC_SALES_TEST
report zsdc_sales_test.
*DATA: wa_bapi_header TYPE bapisdhd1.
Include Name - ZSDC_SALES_ORD_UPLOAD_TOP
Program Name - ZSDC_SALES_ORD_UPLOAD_1393
Program Title - Include for Data Declaration and selection screen
Created by - Lalitha W
Created on - 18-Nov-2008
Object ID - SD_C_1393_SALES_ORDER_UPLOAD
Request Id - SD3K905579
Description - This is a common INCLUDE for data declarations and
*selection screen details.
HISTORY
Date |Developer |Req by | Description |Reference ID
| | | |
| | | |
TYPE-POOLS
*TYPE-POOLS: truxs, abap, slis.
TABLES
*TABLES: t100.
TYPES
types:begin of ty_header,
auart(4) type c, " Sales Order Type
vkorg(4) type c, " Sales Organization
vtweg(2) type c, " Distrubution Channel
spart(2) type c, " Division
kunnr_1(10) type c, " Sold to Party
kunnr_2(10) type c, " Ship to Party
augru(3) type c, " Order Reason
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
ketdat(10) type c, " Required Delivery Date
zterm(4) type c, " Payment Terms
inco1(3) type c, " Inco Terms -1
inco2(28) type c, " Inco Terms -2
prsdt(10) type c, " pricing date
waerk(5) type c, " Document Currency
vkbur(4) type c, " Sales Office
vkgrp(3) type c, " Sales group
pltyp(2) type c, " Price List type
kdgrp(2) type c, " Customer Group
bstkd_e(35) type c, " Ship-to-party PO number
submi(10) type c, " Collective Number
bname(35) type c, " Name
ihrez(12) type c, " Your Reference
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
partner_1(25) TYPE c, " Partner(Bill To Party Number)
partner_2(25) TYPE c, " Partner(Payer Number)
partner_3(25) TYPE c, " Partner(Sales Responsible Number)
partner_4(25) TYPE c, " Partner(Order admin)
partner_5(25) TYPE c, " Partner(Contact person)
partner_1(10) type c, " Partner(Bill To Party Number)
partner_2(10) type c, " Partner(Payer Number)
partner_3(10) type c, " Partner(Sales Responsible Number)
partner_4(10) type c, " Partner(Order admin)
partner_5(10) type c, " Partner(Contact person)
tdspras_1(2) type c,
text_1(500) type c, " Text Before Items Z012
tdspras_2(2) type c,
text_2(500) type c, " Invocie Up Z034
tdspras_3(2) type c,
text_3(500) type c, " Invocie Down Z035
tdspras_4(2) type c,
text_4(500) type c, " Customer Reference Continue Z018
tdspras_5(2) type c,
text_5(500) type c, " Dispatch Marks/ Order Z019
tdspras_6(2) type c,
text_6(500) type c, " Ordered By Z003
tdspras_7(2) type c,
text_7(500) type c, " Sales Parameters Z002
kvgr1(3) type c, " Industry
kvgr2(3) type c, " customer BU
end of ty_header.
types: begin of ty_item,
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
bstkd_e(35) type c, " Ship-to-party PO number
posnr(6) type c, " POSTION NUMBER
matnr(18) type c, " Material Number
kwmeng(18) type c, " Order Quantity
pstyv(4) type c, " Sales doc. item categ
kursk(18) type c, " EXCHANGE RATE****
ffprf(8) type c, " DIP PROFILE
werks(4) type c, " Delivering Plant
vstel(4) type c, " SHIPPING POINT
lgort(4) type c, " STORAGE LOCATION
route(6) type c, " Route
kurrf(18) type c, " EXCHANGE RATE-FI
ntgew(18) type c, " Net Weight
brgew(18) type c, " Gross Weight
gewei(3) type c, " Weight Unit
prctr(10) type c, " profit center
abgrs(6) type c, " RESULT ANALYSIS KEY
kalsm_k(4) type c, " COSTING SHEET
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
text_1(500) type c, " material Text 0001
tdspras_1(1) type c,
text_2(500) type c, " Pr Text 9001
tdspras_2(1) type c,
end of ty_item.
types: begin of ty_schedule_line,
bstkd(35) type c, "PO number
bstdk(10) type c, "PO date
bstkd_e(35) type c, "Ship-to-party PO number
posnr(6) type c, "sales doc.Item
etdat(10) type c, "Schedule line date
wmeng(2) type c, "Order Quantity
end of ty_schedule_line.
types: begin of ty_err ,
auart(4) type c, " Sales Order Type
vkorg(4) type c, " Sales Organization
vtweg(2) type c, " Distrubution Channel
spart(2) type c, " Division
kunnr_1(10) type c, " Sold to Party
kunnr_2(10) type c, " Ship to Party
augru(3) type c, " Order Reason
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
ketdat(10) type c, " Required Delivery Date
zterm(4) type c, " Payment Terms
inco1(3) type c, " Inco Terms -1
inco2(28) type c, " Inco Terms -2
prsdt(10) type c, " pricing date
waerk(5) type c, " Document Currency
vkbur(2) type c, " Sales Office
vkgrp(3) type c, " Sales group
pltyp(2) type c, " Price List type
kdgrp(2) type c, " Customer Group
bstkd_e(35) type c, " Ship-to-party PO number
submi(10) type c, " Collective Number
bname(35) type c, " Name
ihrez(12) type c, " Your Reference
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
partner_1(25) type c, " Partner(Bill To Party Number)
partner_2(25) type c, " Partner(Payer Number)
partner_3(25) type c, " Partner(Sales Responsible Number)
partner_4(25) type c, " Partner(Order admin)
partner_5(25) type c, " Partner(Contact person)
tdspras_1(2) type c,
text_1(500) type c, " Text Before Items Z012
tdspras_2(2) type c,
text_2(500) type c, " Invocie Up Z034
tdspras_3(2) type c,
text_3(500) type c, " Invocie Down Z035
tdspras_4(2) type c,
text_4(500) type c, " Customer Reference Continue Z018
tdspras_5(2) type c,
text_5(500) type c, " Dispatch Marks/ Order Z019
tdspras_6(2) type c,
text_6(500) type c, " Ordered By Z003
tdspras_7(2) type c,
text_7(500) type c, " Sales Parameters Z002
kvgr1(3) type c, " Industry
kvgr2(3) type c, " customer BU
message(600) type c,
end of ty_err.
types: begin of ty_t685a,
kschl type kschl,
krech type krech,
end of ty_t685a.
INTERNAL TABLES
***header
data: g_krech_1(4) type c, " Calculation type for condition
g_krech_2(4) type c, " Calculation type for condition
g_krech_3(4) type c. " Calculation type for condition
g_krech_4(4) TYPE c, " Calculation type for condition
g_krech_5(4) TYPE c, " Calculation type for condition
g_krech_6(4) TYPE c, " Calculation type for condition
g_krech_7(4) TYPE c, " Calculation type for condition
g_krech_8(4) TYPE c, " Calculation type for condition
g_krech_9(4) TYPE c, " Calculation type for condition
g_krech_10(4) TYPE c, " Calculation type for condition
g_krech_11(4) TYPE c, " Calculation type for condition
g_krech_12(4) TYPE c, " Calculation type for condition
g_krech_13(4) TYPE c, " Calculation type for condition
g_krech_14(4) TYPE c, " Calculation type for condition
g_krech_15(4) TYPE c, " Calculation type for condition
g_krech_16(4) TYPE c, " Calculation type for condition
g_krech_17(4) TYPE c, " Calculation type for condition
g_krech_18(4) TYPE c, " Calculation type for condition
g_krech_19(4) TYPE c, " Calculation type for condition
g_krech_20(4) TYPE c. " Calculation type for condition
Items
data: g_krech_item_1(4) type c, " Calculation type for condition
g_krech_item_2(4) type c, " Calculation type for condition
g_krech_item_3(4) type c. " Calculation type for condition
g_krech_item_4(4) TYPE c, " Calculation type for condition
g_krech_item_5(4) TYPE c, " Calculation type for condition
g_krech_item_6(4) TYPE c, " Calculation type for condition
g_krech_item_7(4) TYPE c, " Calculation type for condition
g_krech_item_8(4) TYPE c, " Calculation type for condition
g_krech_item_9(4) TYPE c, " Calculation type for condition
g_krech_item_10(4) TYPE c, " Calculation type for condition
g_krech_item_11(4) TYPE c, " Calculation type for condition
g_krech_item_12(4) TYPE c, " Calculation type for condition
g_krech_item_13(4) TYPE c, " Calculation type for condition
g_krech_item_14(4) TYPE c, " Calculation type for condition
g_krech_item_15(4) TYPE c, " Calculation type for condition
g_krech_item_16(4) TYPE c. " Calculation type for condition
data: it_t685a type standard table of ty_t685a.
data: wa_bapi_header type bapisdhd1,
wa_bapi_headerx TYPE bapisdhd1x,
it_bapi_item type table of bapisditm,
it_bapi_itemx TYPE TABLE OF bapisditmx,
it_bapi_cond type table of bapicond,
it_bapi_condx TYPE TABLE OF bapicondx,
it_bapi_partner type table of bapiparnr,
it_bapi_shdl type table of bapischdl,
it_bapi_shdlx TYPE TABLE OF bapischdlx,
it_bapi_order_text type TABLE OF BAPISDTEXT,
it_bapireturn type table of bapiret2.
data: wa_bapi_item like line of it_bapi_item,
wa_bapi_itemx LIKE LINE OF it_bapi_itemx,
wa_bapi_cond like line of it_bapi_cond,
wa_bapi_condx LIKE LINE OF it_bapi_condx,
wa_bapi_partner like line of it_bapi_partner,
wa_bapi_shdl like line of it_bapi_shdl,
wa_bapi_shdlx LIKE LINE OF it_bapi_shdlx,
wa_bapi_order_text like LINE OF it_bapi_order_text,
wa_bapireturn like line of it_bapireturn.
*DATA: zmode(1) VALUE 'N'.
data: it_header type standard table of ty_header.
*DATA: it_temp_header TYPE STANDARD TABLE OF ty_header.
data: it_item type standard table of ty_item.
*DATA: it_temp_item TYPE STANDARD TABLE OF ty_item.
data: it_err type standard table of ty_err.
data: it_fline1 type standard table of tline,
wa_fline1 type tline.
data: it_thead1 type thead.
data: it_fline2 type standard table of tline,
wa_fline2 type tline.
data: it_thead2 type thead.
data: it_fline3 type standard table of tline,
wa_fline3 type tline.
data: it_thead3 type thead.
data: it_fline4 type standard table of tline,
wa_fline4 type tline.
data: it_thead4 type thead.
data: it_fline5 type standard table of tline,
wa_fline5 type tline.
data: it_thead5 type thead.
data: wa_header like line of it_header,
wa_item like line of it_item,
wa_err type ty_err,
wa_bill LIKE LINE OF it_bill,
wa_bill1 LIKE LINE OF it_bill,
wa_iterr like line of it_err,
wa_t685a like line of it_t685a.
wa_bill_item TYPE ty_bill_item.
data: it_schedule_line type standard table of ty_schedule_line,
wa_schedule_line type ty_schedule_line.
data: sales_order_no type bapivbeln-vbeln.
data: ext_sales_order_no type bapivbeln-vbeln.
Variable to be used to separate the fields which are concatenated by a
runtime character
*DATA: g_tabchar(1) TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
*DATA: wa_truxs_t_text_data TYPE truxs_t_text_data.
*DATA: g_filename TYPE string,
g_path TYPE string,
g_fullpath TYPE string,
g_user_action TYPE i,
g_file_encoding TYPE abap_encoding.
*DATA : g_text(8192),
data : g_mstring1(100) type c,
g_mstring2(100) type c,
g_mstring3(100) type c,
g_mstring4(100) type c,
g_mstring5(100) type c.
data: g_count1 type ebelp,
g_str_count1(6) type c.
data: g_count type ebelp,
g_str_count(6) type c.
*DATA: f_subrc LIKE sy-subrc,
f_subrc1 LIKE sy-subrc,
f_error(500) TYPE c,
item1(27) TYPE c,
item2(27) TYPE c,
item3(27) TYPE c,
item4(27) TYPE c,
i TYPE ekpo-ebelp.
*DATA: g_billplan_header TYPE c,
g_billplan_item TYPE c.
data : g_external_so type vbak-vbeln. "SO
SELECTION-SCREEN
selection-screen begin of block frame1 with frame title text-001 .
parameters:p_file1 type rlgrap-filename, "OBLIGATORY, "Header data.
p_file2 type rlgrap-filename, "OBLIGATORY, "Item Data.
p_file3 type rlgrap-filename, "Schedule line.
p_file4 type rlgrap-filename ."OBLIGATORY. "Error file.
selection-screen end of block frame1.
start-of-selection.
wa_bapi_header-doc_type = 'Z0MX'. "order type
wa_bapi_header-sales_org = '0130'."sales org
wa_bapi_header-distr_chan = '13'. "distr channel
wa_bapi_header-division = '13'. "division
Old code from copied program
wa_bapi_header-purch_no_s = wa_header-kunnr_2. " Ship to party
New code as required in Finland project
We are using to Header ->Order Tab -> Ship to Party -> Purchase order no (BSTKD_E) to store Old legacy SO number
wa_bapi_header-purch_no_s = 'MX100443'. "External SO i.e Old legacey SO number
wa_bapi_header-ref_1_s = '0000666666'. "Sold to party
wa_bapi_header-ord_reason = wa_header-augru.
wa_bapi_header-purch_no_c = 'ddr1234'. " PO number
wa_bapi_header-purch_date = sy-datum. " PO date
wa_bapi_header-req_date_h = sy-datum. " Required Delivery Date
wa_bapi_header-pmnttrms = '01'. " Payment Terms
wa_bapi_header-incoterms1 = wa_header-inco1.
wa_bapi_header-incoterms2 = wa_header-inco2.
wa_bapi_header-price_date = wa_header-prsdt. " Pricing date
wa_bapi_header-currency = wa_header-waerk. " Document Currency
wa_bapi_header-sales_grp = wa_header-vkgrp. " Sales group
wa_bapi_header-price_list = wa_header-pltyp. " Price list type
wa_bapi_header-cust_group = wa_header-kdgrp. " Cust Group
wa_bapi_header-ship_type = wa_header-vsart. " Shipping Type
wa_bapi_header-purch_no_s = wa_header-bstkd_e. " Ship-to-party po number
wa_bapi_header-collect_no = wa_header-submi. " Collective No.
wa_bapi_header-name = wa_header-bname. " Name
wa_bapi_header-ref_1 = wa_header-ihrez. " Your Reference
wa_bapi_header-cust_grp1 = wa_header-kvgr1. " Industry
wa_bapi_header-cust_grp2 = wa_header-kvgr2. " Customer BU
*ENDFORM. " f_header
IF wa_header-partner_1 IS NOT INITIAL.
wa_bapi_partner-partn_role = 'AG'.
wa_bapi_partner-partn_numb = '0000666666'.
wa_bapi_partner-itm_number = '000000'.
append wa_bapi_partner to it_bapi_partner.
clear wa_bapi_partner.
ENDIF.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = wa_header-partner_2
importing
output = wa_header-partner_2.
IF wa_header-partner_2 IS NOT INITIAL.
wa_bapi_partner-partn_role = 'WE'.
wa_bapi_partner-partn_numb = '0000666666'.
wa_bapi_partner-itm_number = '000000'.
append wa_bapi_partner to it_bapi_partner.
clear wa_bapi_partner.
ENDIF.
perform f_item.
data : order_items_inx type table of bapisditmx with header line.
order_items_inx-material = 'X'. "
order_items_inx-target_qty = 'X'. "
order_items_inx-comp_quant = 'X'. "
order_items_inx-trgqty_den = 'X'.
order_items_inx-rnddlv_qty = 'X'.
order_items_inx-updateflag = 'I'.
order_items_inx-target_qu = 'X'.
order_items_inx-plant = 'X'. "
append order_items_inx.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
exporting
salesdocumentin = 'MX11111152'
order_header_in = wa_bapi_header
order_header_inx = wa_bapi_headerx
importing
salesdocument = sales_order_no
tables
return = it_bapireturn
order_items_in = it_bapi_item
order_items_inx = order_items_inx
order_partners = it_bapi_partner
order_conditions_in = it_bapi_cond.
if sy-subrc is initial.
commit work.
endif.
*& Form f_item
text
form f_item .
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = wa_item-posnr
importing
output = wa_item-posnr.
wa_item-posnr = '000010'.
IF sy-subrc EQ 0. "IS INITIAL.
move wa_item-posnr to g_str_count."commented out by shakti
ENDIF.
wa_bapi_item-itm_number = wa_item-posnr. " Line item
WA_BAPI_ITEM-PO_ITM_NO = WA_ITEM-EBELP.
wa_bapi_item-division = wa_item-spart.
wa_bapi_item-purch_no_c = 'ddr1234'. " po number
wa_bapi_item-purch_date = sy-datum. " po date
wa_bapi_item-purch_no_s = 'MX11111112'. " Ship-to-party po number
wa_item-matnr = 'MAXIMO_SERVICE'.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = wa_item-matnr
importing
output = wa_item-matnr
exceptions
length_error = 1
others = 2.
if sy-subrc is initial.
wa_bapi_item-material = wa_item-matnr. "material
endif.
wa_bapi_item-target_qty = '1'. " Order qty
wa_bapi_item-comp_quant = '1'.
wa_bapi_item-target_qu = 'EA'.
wa_bapi_item-fixed_quan = '1'.
wa_bapi_item-comp_quant = wa_item-kwmeng.
wa_bapi_item-trgqty_den = '1'.
wa_bapi_item-rnddlv_qty = wa_item-kwmeng.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_item-ps_psp_pnr
IMPORTING
output = wa_item-ps_psp_pnr.
IF sy-subrc = 0.
wa_bapi_item-wbs_elem = wa_item-ps_psp_pnr.
ENDIF.
wa_bapi_item-item_categ = 'ZMAX'.
wa_bapi_item-ex_rate_fi = wa_item-kurrf.
wa_bapi_item-dli_profil = wa_item-ffprf. " Dynamic item processor profile
wa_bapi_item-route = wa_item-route. " route
wa_bapi_item-exchg_rate = wa_item-kursk.
wa_bapi_item-plant = '2090'. " Plant
wa_bapi_item-ship_point = 'FN11'. " Shipping point
wa_bapi_item-store_loc = wa_item-lgort. " stg loc
REPLACE ALL OCCURRENCES OF ',' IN wa_item-ntgew WITH '.'.
REPLACE ALL OCCURRENCES OF ',' IN wa_item-brgew WITH '.'.
wa_bapi_item-net_weight = wa_item-ntgew. "
wa_bapi_item-gross_wght = wa_item-brgew. "
call function 'CONVERSION_EXIT_CUNIT_INPUT'
exporting
input = wa_item-gewei
language = sy-langu
importing
output = wa_item-gewei.
EXCEPTIONS
unit_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
wa_bapi_item-untof_wght = 'KG'. " weight unit
replace all occurrences of ',' in wa_item-kursk with '.'.
replace all occurrences of ',' in wa_item-kurrf with '.'.
wa_bapi_item-profit_ctr = wa_item-prctr. " Profit center
wa_bapi_item-resanalkey = wa_item-abgrs. " RESULT ANALYSIS KEY
wa_bapi_item-cstg_sheet = wa_item-kalsm_k. " COSTING SHEET
append wa_bapi_item to it_bapi_item.
endform. " f_item
Thanks & regards,
Chetansee the following to create sales order:-
*& Report ZSALESORDER
*&DEVELOPED BY JANI KRUPA 4.10.2008
REPORT ZSALESORDER.
Parameters
Sales document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d .
SELECTION-SCREEN END OF LINE.
Complete Deliver
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text10 FOR FIELD p_autlf.
PARAMETERS: p_autlf TYPE autlf DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
v_text10 = 'Complete delivery'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
header-COMPL_DLV = p_autlf.
header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF. -
Not able to update the project using 'BAPI_PROJECT_MAINTAIN'.
I want to create a project , with reference to an already existing project.
I am using 'BAPI_PROJECT_GETINFO' to get the data of the existing project.
The bapi gives the following:
1) e_project_definition.
2) e_wbs_element_table.
3) e_wbs_hierarchie_table
I am passing the u2018e_project_definitionu2019 to 'BAPI_PROJECTDEF_CREATE' to create project.The project is created successfully.
But I am not able to update the project with u2018e_wbs_element_tableu2019
and u2018e_wbs_hierarchie_tableu2019. I am using 'BAPI_PROJECT_MAINTAIN' to update the project.
The program is not giving an error, but it is also not updating the E_WBS_ELEMENT_TABLE and E_WBS_HIERARCHIE_TABLE.
I am attaching the code below.
*& Report ZTEST_PC.
DATA: project_definition TYPE bapipr-project_definition,
with_activities TYPE bapipr-with_activities,
with_milestones TYPE bapipr-with_milestones,
with_subtree TYPE bapipr-with_subtree,
e_project_definition TYPE bapi_project_definition_ex,
return TYPE bapireturn1.
DATA: i_wbs_element_table TYPE TABLE OF bapi_wbs_elements,
e_wbs_element_table TYPE TABLE OF bapi_wbs_element_exp,
e_wbs_milestone_table TYPE TABLE OF bapi_wbs_milestone_exp,
e_wbs_hierarchie_table TYPE TABLE OF bapi_wbs_hierarchie,
e_activity_table TYPE TABLE OF bapi_network_activity_exp,
e_message_table TYPE TABLE OF bapi_meth_message.
DATA: wa_wbs_element_table TYPE bapi_wbs_element_exp,
wa_wbs_hierarchie_table TYPE bapi_wbs_hierarchie.
DATA: l_new_proj_no TYPE prpss-posid.
DATA: l_project_definition TYPE bapi_project_definition.
DATA: l_project_definition_upd TYPE bapi_project_definition_up.
DATA: l_project_definition_stru TYPE bapi_project_definition.
DATA :l_pspnr TYPE ps_intnr,
l_pspid TYPE ps_pspid,
l_pro_def(9) TYPE c.
DATA :l_proj TYPE proj.
DATA :l_len TYPE i VALUE '0'.
DATA: lt_dd03l TYPE TABLE OF dd03l,
ls_dd03l TYPE dd03l.
DATA: fieldname(50), fieldname1(50) TYPE c.
DATA: p_ddic_name(40), struc(40), fun_struc(50) TYPE c.
FIELD-SYMBOLS: <struc>, <c>, <sc>, <def_field> TYPE any.
DATA : i_method_project TYPE TABLE OF bapi_method_project,
wa_method_project TYPE bapi_method_project.
DATA : l_index TYPE bapi_method_project-refnumber.
DATA : it_wbs_element_table TYPE TABLE OF bapi_wbs_element,
it_wbs_hierarchie_table TYPE TABLE OF bapi_wbs_hierarchie.
DATA : wl_wbs_element_table TYPE bapi_wbs_element,
wl_wbs_hierarchie_table TYPE bapi_wbs_hierarchie.
DATA : l_wbs_element_table_update TYPE bapi_wbs_element_update.
DATA : i_wbs_element_table_update TYPE TABLE OF bapi_wbs_element_update.
Get the project info of the Project 'C01.10995'
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
input = 'C01.10995'
IMPORTING
output = project_definition.
CALL FUNCTION 'BAPI_PROJECT_GETINFO'
EXPORTING
project_definition = project_definition
IMPORTING
e_project_definition = e_project_definition
return = return
TABLES
i_wbs_element_table = i_wbs_element_table
e_wbs_element_table = e_wbs_element_table
e_wbs_milestone_table = e_wbs_milestone_table
e_wbs_hierarchie_table = e_wbs_hierarchie_table
e_activity_table = e_activity_table
e_message_table = e_message_table.
Automate the process the process to get the next number for the func module 'CN_SUCHE_FREIE_NUMMER'.
CLEAR : l_pspnr, l_pspnr, l_pspid, l_pro_def.
SELECT MAX( pspnr ) FROM proj INTO l_pspnr.
SELECT SINGLE * FROM proj INTO l_proj WHERE pspnr EQ l_pspnr.
l_pspid = l_proj-pspid.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
EXPORTING
input = l_pspid
IMPORTING
output = l_pspid.
l_pro_def = l_pspid+4(5) + 1.
CONDENSE l_pro_def.
CONCATENATE 'C01.' l_pro_def INTO l_pspid .
function module to generate the nect free number between the given range.
CALL FUNCTION 'CN_SUCHE_FREIE_NUMMER'
EXPORTING
search_imp = '2'
prps_s_imp = l_pspid
prps_e_imp = 'C01.29999'
no_dialog = 'X'
IMPORTING
prps_exp = l_new_proj_no.
IF sy-subrc <> 0.
EXIT.
ENDIF.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION'.
Get the New Project Number.
MOVE-CORRESPONDING e_project_definition TO l_project_definition.
l_project_definition-project_definition = l_project_definition-project_definition+0(3).
l_new_proj_no = l_new_proj_no+4(5).
CONCATENATE l_project_definition-project_definition '.' l_new_proj_no INTO l_project_definition-project_definition.
TRANSLATE l_project_definition-project_definition TO UPPER CASE.
MOVE-CORRESPONDING l_project_definition TO l_project_definition_stru.
Create the New project with the New project Number.
CALL FUNCTION 'BAPI_PROJECTDEF_CREATE'
EXPORTING
project_definition_stru = l_project_definition_stru.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = ' '.
Populate internal table i_method_project for the bapi_project_maintain func module.
CLEAR : wa_wbs_element_table,wl_wbs_element_table,wa_wbs_hierarchie_table,
wl_wbs_hierarchie_table, it_wbs_element_table, it_wbs_hierarchie_table.
CLEAR : wa_method_project, i_method_project, l_index .
l_index = 0.
LOOP AT e_wbs_element_table INTO wa_wbs_element_table.
MOVE-CORRESPONDING wa_wbs_element_table TO wl_wbs_element_table .
APPEND wl_wbs_element_table TO it_wbs_element_table .
wa_method_project-objecttype = 'WBS_ELEMENT'.
wa_method_project-method = 'CREATE'.
wa_method_project-objectkey = wa_wbs_element_table-wbs_element.
l_len = strlen( wa_wbs_element_table-wbs_element ).
Setting Levels as reference number.
CASE l_len.
WHEN '9'.
l_index = 1.
WHEN '12'.
l_index = 2.
WHEN '15'.
l_index = 3.
WHEN '18'.
l_index = 4.
ENDCASE.
wa_method_project-refnumber = l_index .
TRANSLATE wa_method_project-objectkey TO UPPER CASE.
APPEND wa_method_project TO i_method_project.
CLEAR :wa_method_project, l_index.
ENDLOOP.
l_index = l_index + 1.
wa_method_project-refnumber = ' '. "l_index .
wa_method_project-objecttype = ' '. "'WBS_ELEMENT'.
wa_method_project-method = 'SAVE'.
wa_method_project-objectkey = ' '.
APPEND wa_method_project TO i_method_project.
CLEAR wa_method_project.
LOOP AT e_wbs_hierarchie_table INTO wa_wbs_hierarchie_table.
MOVE-CORRESPONDING wa_wbs_hierarchie_table TO wl_wbs_hierarchie_table.
APPEND wl_wbs_hierarchie_table TO it_wbs_hierarchie_table.
ENDLOOP.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION' respectively.
CLEAR : l_project_definition_upd.
p_ddic_name = 'BAPI_PROJECT_DEFINITION_UP'.
struc = 'l_project_definition_upd'.
fun_struc = 'E_PROJECT_DEFINITION'.
TRANSLATE: p_ddic_name TO UPPER CASE,
struc TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
<sc> = 'X'.
ENDIF.
ENDLOOP.
Update the fields of 'l_wbs_element_table_update' as 'X' for the fields which has values in 'e_wbs_element_table' respectively.
READ TABLE e_wbs_element_table INTO wa_wbs_element_table INDEX '1'.
CLEAR : l_wbs_element_table_update, fieldname1, p_ddic_name, struc, fun_struc .
p_ddic_name = 'BAPI_WBS_ELEMENT_UPDATE'.
struc = 'l_wbs_element_table_update'.
fun_struc = 'WA_WBS_ELEMENT_TABLE'.
TRANSLATE: p_ddic_name TO UPPER CASE,
struc TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
<sc> = 'X'.
ENDIF.
ENDLOOP.
Append the value of l_wbs_element_table_update TO the table i_wbs_element_table_update for Bapi_project_maintain.
CLEAR i_wbs_element_table_update.
APPEND l_wbs_element_table_update TO i_wbs_element_table_update.
CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
EXPORTING
i_project_definition = l_project_definition
i_project_definition_upd = l_project_definition_upd
TABLES
i_method_project = i_method_project
i_wbs_element_table_update = i_wbs_element_table_update
i_wbs_element_table = it_wbs_element_table.
i_wbs_hierarchie_table = it_wbs_hierarchie_table.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = ' '.
Please help me to solve the issue.I am not sure why it is not working?? Try for any other alternate function modules.
But i see one issue with your coding, always check the return table message type and use commit work, instead of sy-subrc check. This fails for BAPI's -
I am using an external keyboard which is actually a Device KeyAT who do the keyboard simulator kind of operation over Serial (RS232) to USB connector.
I have a controller machine connected with Serial Port and MAC machine is connected by a USB port to that device.
I am able to type the password on OS X login screen but on using the same device and set up on Filevault preboot I am not able to type the password.
This connector is detected as a USB 2.0 composite device in System Hardware table.
Can someone hints or point out a potential cause or to rectify this issue.
Thanks in Advance.Which os version are you using?
Which iPod Nano model do you have? iPod Models
iPod not recognized in iTunes and Mac desktop -
Not able to creat the user in UME
Hi,
I'm using MII 12.1.9 and NW 7.11.
I'm trying to create user in NW UME,but I'm getting the error while doing so.The error message is "Error Creating the User".
The complete log detail is as below:
Error creating user
[EXCEPTION]
com.sap.security.core.wd.exception.UmeUiException:
at com.sap.security.core.wd.umeuifactory.UmeUiFactoryCompInterface.handleThrowable(UmeUiFactoryCompInterface.java:3072)
at com.sap.security.core.wd.umeuifactory.UmeUiFactoryCompInterface.createEntity(UmeUiFactoryCompInterface.java:349)
at com.sap.security.core.wd.umeuifactory.wdp.InternalUmeUiFactoryCompInterface.wdInvokeMethod(InternalUmeUiFactoryCompInterface.java:937)
at com.sap.tc.webdynpro.progmodel.generation.ExternalControllerPI$ExternalInterfaceInvocationHandler.invoke(ExternalControllerPI.java:339)
at $Proxy2071.createEntity(Unknown Source)
at com.sap.security.core.wd.maintainuser.MaintainUserComp.saveModifications(MaintainUserComp.java:952)
at com.sap.security.core.wd.maintainuser.wdp.InternalMaintainUserComp.saveModifications(InternalMaintainUserComp.java:689)
at com.sap.security.core.wd.maintainuser.ModifyUserView.onActionSave(ModifyUserView.java:569)
at com.sap.security.core.wd.maintainuser.wdp.InternalModifyUserView.wdInvokeEventHandler(InternalModifyUserView.java:550)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:131)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:72)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:156)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:91)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:162)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:110)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:97)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:514)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:52)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1547)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1361)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoProcessing(AbstractExecutionContextDispatcher.java:154)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppProcessing.doService(DispatchHandlerForAppProcessing.java:35)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoProcessing(ExecutionContextDispatcher.java:114)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:80)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:571)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:602)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:523)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:270)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:729)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:256)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:258)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:425)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Caused by: java.lang.NoSuchMethodError: com.sap.security.api.logon.ISecurityPolicyFactory.getSecurityPolicyByUniqueName(Ljava/lang/String;)Lcom/sap/security/api/ISecurityPolicy;
at com.sap.security.core.jmx.impl.JmxModificationHelper.getSecurityPolicyFromAttributes(JmxModificationHelper.java:2531)
at com.sap.security.core.jmx.impl.JmxModificationHelper.createEntity(JmxModificationHelper.java:1588)
at com.sap.security.core.jmx.impl.JmxServer.createEntity(JmxServer.java:226)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)
at javax.management.StandardMBean.invoke(StandardMBean.java:323)
at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:400)
at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:340)
at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:288)
at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:813)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
at com.sap.security.core.jmx._gen.IJmxServer$Impl.createEntity(IJmxServer.java:534)
at com.sap.security.core.wd.jmxmodel.JmxModelCompInterface.createEntity(JmxModelCompInterface.java:249)
at com.sap.security.core.wd.jmxmodel.wdp.InternalJmxModelCompInterface.wdInvokeMethod(InternalJmxModelCompInterface.java:788)
at com.sap.tc.webdynpro.progmodel.generation.ExternalControllerPI$ExternalInterfaceInvocationHandler.invoke(ExternalControllerPI.java:339)
at $Proxy2070.createEntity(Unknown Source)
at com.sap.security.core.wd.umeuifactory.UmeUiFactoryCompInterface.createEntity(UmeUiFactoryCompInterface.java:347)
... 77 more
Thanks in Advance
SureshTry to look in the trace log as you'll see more information there.
<Your Data Drive>:\usr\sap\<Your Sap Name>\J00\j2ee\cluster\server0\log\defaultTrace_00.x
where x refers to the file with the latest timestamp.
The log you posted does not say what the error was, and due to its detailed levels regular MII users can't help. -
hi gurus,,,
my order type --or
item category group - norm
item category --tan
and i have two customers ...,, 10 and 11
, three materials ...m10, m11, m12.
when i try to create the order with the combination of 10 and m10 ,the system come up with error massage " No item category available (Table T184 OR 0001 CSEL TAN)" ...
and i am able to create remaining all combination
cust no material no status
10 m10 not possible to create order( error"-No item category available (Table T184 OR 0001 CSEL TAN0))
10 m11 possible
10 m12 possible
10 m13 possible
11 m10 possible
11 m11 possible
11 m12 possible
11 m13 possible
can u give me the solutionhi
if u have created ur own doc type without referring to std doc type then u have to carry out all customising related to doc type define/assign,item catg define/assign,sched lincat define/assign.in spro.
if u have created referring to sap std doc type with copy all data then system by default does all these .
In other words
Check if the combination of your sales order type and item category type exist.
In customizing you need to set up which item category types can be linked to the sales order types. -
Not able to create the delivery document in '000' client of IDES
Dear Experts,
I am facing a problem while creating an sd process flow in the client '000' of SAP IDES system. I am working over SD CIN. Previously I received an error while generating sales order. The error was stating that certain entries were missing in the table CRMPAROLTP & it was the error message number V3, 302.
For that I went to SM30 & defined 'CRM_RELEASE' (under parameter name) & '600' (under parameter value), which solved my problem. Now I received another problem while creating the delivery document which is as follows:
Problem : "Message no. B2 001 : Local logical system is not defined"
Kindly assist me in sorting out this problem. I checked the stock level at MMBE, but the stock was not reduced with the quantity as was specified under the delivery document & at the same time the document number was also not available for further processing.
What to do?
Thanks & regards,
M.S.Kumar.Hi Prashant,
Thank you very much for resolving my problem. Meanwhile I first went to trx. code 'BD54' &, there I defined a new logical system & ultimately assigned that logical system to client at 'SCC4' as specified by you. And my problem got resolved.
Thank you very much once again.
With regards,
M.S.Kumar. -
Not able to create the NEW DC under the Track from NWDS
Hi All,
I have imported one Track to the NWDS. Now i am trying to create the new dc under the SC component which i have imported under the track.
When entered as
vendor: abc.com
name as: test_dc
click on next giving the following error.
syntax of abc.com/test is not valid:Invalid name: appropriate prefix not found; choose another name or another name server.
Any body tell me how to resolve this error.
Regards
VijayHi Vijay,
Following can be done for Name Reservation:
1. Log on to the SLD.
2. Click on Name Reservation
3. Select "Development Component" in the Name Category
4. Click on button New Name Prefix
5. Add your prefix abc.com in the NAme Prefix field and Save.
You can also look at [this.|http://help.sap.com/saphelp_nw70/helpdata/EN/43/e9905fe1582d53e10000000a422035/frameset.htm]
Regards,
Alka. -
when creating invoice using the API AR_INVOICE_AP_PUB.Create_Single_invoice Am Getting the below Error:
Transaction type is invalid with current transaction date
invalid transaction type
either an inventory item description must be provided
Kindly help me hereHi Team,
I tried creating the invoice and I got the above errors, however, when updated the batch source ID I am now getting this following error only, i am just left with the following Error only
Either an inventory item or description must be provided.
Please help me on this. -
Not able to see the added Used DC webdynpro compoent in used Webdynpro Comp
Hi All,
I have three DC's, A,B,C
I have declared as B and C components as public parts,
I have have added the B,C as used DC's in A dc.
Now i tried add B as used webdynpro component in A dc, by using "used Webdynpro Component".
I am able to add B as used webdynpro component. But when chooose "Add used component" -> then browse -> i am able to see only B componet , C component is not visible.
I have added the C component as used dc in A dc.
Can any body tell me what could be the problem.
Actually A dc is in SCA file. and B and C dc's are different SCA files. These B&C .SCA files defined as dependencies for A dc SCA file.
Regards
VijayHi,
Please ensure that you have created two Public Parts per DC.
In the Wizard that will help you create the Public Parts - you will find a radio button (one for API and one for SDA).
You need to create both for each of the components B and C. And if you still dont see any change then the Public Parts are not being created correctly.
To correct this - I usually delete the public parts and the usages. Then close both the probjects and reopen them. Then recreate public parts and the usages. (Its a silly suggestion I know - but it seems to work!)
Hope that helps.
Thanks.
p256960
Maybe you are looking for
-
My imac will transfer screen view to TV but no sound transfer. Works fine with my ipad or iphone. Can't get imac going for music. Can anybody suggest a fix? Sfitz07
-
I need the Java and the Adobe in order to continue to use my Scottrade Investment account. My current safari Panther account will not accommodate these Java and Adobe upgrades. The Apple tech advised trying Firefox.
-
I am a web designer and have created a script that puts a browser UI around a Photoshop document. The action places several images and creates several text layers. What I want to do is place all the images then add them into a group called "BROWSER".
-
How can I replace iPhone 4's broken screen?
My iPhone 4's screen was broken, can it be replaced and whtat's the cost?
-
create table p (p1 number constraint ppk primary key); create table f (f1 number constraint ffk references p); create trigger pt after update on p for each row begin update f set f1 = :new.p1 where f1 = :old.p1; end; insert into p values(1); insert i