Certificate doesn't get signed
Hi all,
I'm facing the following problem:
In our PI 7.00 system we have an AS2 adapter installed. The customer requested a signed certificate for their AS2 server, in order to proved encryption to their messages.
In the key store I have created a key pair and signed the certificate request on http://service.sap.com/tcs as a J2EE certificate.
After importing the response, I see that only the private key gets updated with the issuer. The certificate doesn't change... See below:
PRIVATE KEY
[ creationDate ]: Mon Jun 09 16:48:06 CEST 2008
[ algorithm ]: RSA
[ format ]: PKCS#8
[ selfSigned ]:
[ DN ]: CN=test
[ issuerDN ]: CN=test
CERTIFICATE
[ creationDate ]: Mon Jun 09 16:48:06 CEST 2008
[ DN ]: CN=test
[ issuerDN ]: CN=test
After signing:
PRIVATE KEY
[ creationDate ]: Mon Jun 09 16:50:49 CEST 2008
[ algorithm ]: RSA
[ format ]: PKCS#8
[ signedWith ]:
[ DN ]: CN=test
[ issuerDN ]: CN=Server CA,OU=Server,O=SAP Trust Community,C=DE
CERTIFICATE
[ creationDate ]: Mon Jun 09 16:48:06 CEST 2008
[ DN ]: CN=test
[ issuerDN ]: CN=test
I have created the CSR response via the Visual Administrator, and apparently it is only possible to create a CSR request for the private key.
Am I doing something wrong?
Kind regards,
Mark
I finally managed to generate a signed certificate. I have exported the private key and imported it into an IIS. From there I was able to export the signed certificate.
I assume there is a more convenient way to do this. If someone can provide this, that will be very helpfull.
Kind regards,
Mark
Similar Messages
-
**URGENT : signed applet still doesn't get full permissions**
I've bought a Microsoft Authenticode certificate with which I signed a CAB file containing my class files...
On a client machine, the browser detects security stuff but even when one acknowledges, the applet still doesn't get the permission, for instance, to open a directory for reading... a SecurityException is thrown as if the applet was not signed.
Have I forgotten something or did another one wrong ?? Must I set the Security Manager to null ????
It's really urgent, so please reply asap !!!
Thanks,
R�gis KuckaertzJust signing the applet doesn't give it any permissions. You have to assert whatever permissions you want. For example:
import com.ms.security.*; // need dummy classes to compile for non-MS
// check if we are in the MS JVM
if (Class.forName("com.ms.security.PolicyEngine") != null)
// Assert all Permissions
PolicyEngine.assertPermission(PermissionID.SYSTEM);
catch (Throwable cnfe)
System.out.println("Microsoft JVM permissions not asserted.");
System.out.println(cnfe.getMessage());
} -
Hi,
i am doing one POC for one of the customer. where I have Dummy Domain and I have installed Lync 2013 server std edition and Lync wac server. now i am able to login from workgroup machine via lync 2010 and lync 2013 aslo.
But when I am trying to login from Customer productuion domain machine Lync client login fails but from same machine lync 2010 client is able to login without any issue. when i am trying to login through lync 2013 i am getting this error message.
"Sign-in didn't
work. You didn't get signed in. It might be your sign-in address or logon credentials, so try again. If that doesn't work, contact your support team"
Rgds,
ramesh
Rgds, Ramesh Rawat MCT.Hi,
Please turn on Windows event logging for lync and check the event log on client machine. Please also try manual configuration to test the issue.
Kent Huang
TechNet Community Support -
Hi,
I have a problem when trying to sign emails with an X.509 certificate in Outlook 2010. I constantly get the error message. The certificate is Verified for the email address I'm sending from.
"Invalid Certificate
Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be
used to send from your e-mail address."I have no problem with signing documents in Word 2010 with the same certificate, only when trying to send email.Every check I can perform confirms that there's nothing wrong with the certificate. Yet, Outlook still says it is invalid.I have even tried installing a second X.509 for the same email address just to check. Outlook doesn't seem to like either certificate.I know this has been posted before, but I'm completely stuck here.Thanks,~DanHi,
You may have checked the option "Encrypt contents and attachments for outgoing messages" in Outlook, please uncheck this to test if the problem persists.
File -> Options -> Trust Center -> Trust Center Settings -> E-mail Security -> Clear the checkbox "Encrypt contents and attachments for outgoing messages" -> OK.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Hi,
I created several OS X Apps using Adobe Air. That worked quite well before. Now I have do update my OS X Apps - therefore I also needed update my certificates. [ I'm using Flash CC 2014 on OS X Yosemite 10.10 ]. But whatever I do it doesn’t work anymore. I always get this Message saying:
Unable to build a valid certificate chain for the signer.
I googled a lot and the only "guide" I found is this post (from April 2013) about code singing - http://scottgaertner.com/code_signing/
I’m not used to deal with this kind of stuff (CA etc.) - so it's quite confusing to me.
Would anybody please be so kind and tell me what I have to do?
Is there any instruction from Adobe? (I didn't find one yet)
A step by step instruction for absolute dummies would be great!
Best regards and thank you in advance
JanHi Mukesh,
I installed the Flash CC 2014 update and added some Certificates from Apple to my Keychain. Now EVERYTHING works fine again!! :-)
Thank you very much for the Update! :-) Good job!
Best regards
Jan -
RV110W and QuickVPN - Servers Certificate Doesn't Exist
After a day of troubleshooting I have finally got the QuickVPN client to work. I connect however during the connection I get: "Server's certificate doesn't exist on your local computer. Do you want to quit this connection?" I click no and it connects fine other than this error. So how do I get rid of this error?
Also I have exported the client certificate from the RV110 and put it in the quickvpn directory as I saw suggested elsewhere.
Thanks,
Clint Johnson
Here is my log:
2011/12/21 00:39:44 [STATUS]Connecting...
2011/12/21 00:39:44 [DEBUG]Input VPN Server Address = ***.***.***
2011/12/21 00:39:45 [STATUS]Connecting to remote gateway with IP address: **.**.**.***
2011/12/21 00:39:50 [WARNING]Server's certificate doesn't exist on your local computer.
2011/12/21 00:39:56 [STATUS]Remote gateway was reached by https ...
2011/12/21 00:39:56 [STATUS]Provisioning...
2011/12/21 00:40:06 [STATUS]Success to connect.
2011/12/21 00:40:06 [STATUS]Tunnel is configured. Ping test is about to start.
2011/12/21 00:40:06 [STATUS]Verifying Network...
2011/12/21 00:40:11 [WARNING]Failed to ping remote VPN Router!
2011/12/21 00:40:14 [WARNING]Failed to ping remote VPN Router!I am having the same issue. I generated a certificate by selecting "Generate a New Certificate" and "Export for Client" which creates a file https.csr that I saved it into C:\Program Files (x86)\Cisco Small Business\QuickVPN Client folder.
Still get ther same error message. I click not to quit and so it continues to make the connection successfully.
After connecting though, I cannot see any of my NETWORK Shares. I can connect to my local intranet by typing in the server address directly in the browser. However, I cannot see any computers in my network. I think this is a completely different problem though and should not have anything to do with the certificate issue.
I need to resolve both these issues.
I am using Windows 7 Professional from my remote location (home) which is connected to a D-LINK router which is behind a DSL Modem. I am trying to connect to my Cisco RV-120W router at work.
Please help.
Mike -
Error creating AIR file: Unable to build a valid certificate chain for the signer.
Hi, My boss got a certificate from Thawte, and I'm getting this error message when building my AIR app.
Error creating AIR file: Unable to build a valid certificate chain for the signer.
I'm on windows XP.
thanks,
steveTo manage your code signing certificate, please see
http://www.adobe.com/devnet/air/articles/signing_air_applications_print.html
The error you are seeing is typically caused by exporting a cert without the trust chain. On Windows, in IE, you can manage your keystore by going to
Internet Options > Content > Certificates
When you export the certificate needed for signing your app, be sure to check “Include all certificates in the certificate path, if possible”. -
How do I get signed in? I keep getting "you have been signed out"
How do I get signed in? I keep getting "you have been signed out"
I did the delete the OBEE.db thing but that doesn't fix anything.Hi PRDParks,
Same issue has been discussed in the below mentioned link- https://forums.adobe.com/thread/1324087
Let me know if it helps.
Thanks,
Eshant Jindal -
Airport doesn't get an IP from wifi AP
I have a wifi network in my office, based on D-Link DWL-2100AP (latest firmware). It is setup to Static IP Pool mode, so that when client signs in he recieves from AP an IP-address assigned to clints MAC-address. The clients are set up to recieve network configuration via DHCP. So that every client have the same IP every time and everything could be easily monitored and billed.
The problem is with to Mac-clients, which are sign-in very slowly. The Airport says that it doesn't get DHCP info and self-assign the IP, so the www is not accessible. It gets the info after some time (5-30 minutes), but i didn't find any method to force the renewal of dhcp sign-in (i've tried airport on/off, computer reboot) except the reboot of AP, after that MBP get the IP in most cases.
So that, every morning i'm coming to my office and waiting half an hour or rebooting the AP to get to the internet. The same with other Mac client (13" Macbook - 2008). But nothing similar never happends with Windows-based clients in out network, as soon as portable opened - it is connected. But at the same time nothing similar happend to my MBPro at home - it connects to AP instantly.
I cannot stricktly identify whether the problen is with airport driver, or this exact access point, or exact bundle mac+DWL2100. I've tried to shorten lease time on AP, but it doesn't help.
Hope someone will advise any solution or, at least, any trick to get IP without rebooting AP.
Thanx in advance,
ArtI would lean toward a problem with your access point settings. I have a setup close to this with DHCP reserved reservations into a static pool and I have pretty instant IP distribution. So it isn't a problem with OS X. Have you tried creating a new dedicated network location in sys prefs? Don't think that should make a difference but it is how I connect.
-
When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of this message. When I login to my husband's account, this message does not appear.
Hey sunnyday7!
Here is an article that can help you address this issue:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
Additional Information
OS X automatically relaunches the Finder when it is quit. If the Finder is unresponsive, use Force Quit to relaunch it. Select Finder in the Force Quit Window or Dock, then click Relaunch.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I purged cache in bridge, and photoshop. NO photos will open when I double clik, or will not open again in ACR alone. When I double clik on raw file I get Sign In required Notice--We will now register your TRIAL to your Adobe ID-------I am alread a SUBSCRIBER-------------Yes I get this same issue in Creative Cloud and same issue. error: Camera Raw editing is not enabled-----Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature. These errors are happening inside both CS6 Bridge and CCphotoshop Bridge------NOTE----I am ALREADY signed into Creative Cloud and still get those message errors.........Need to fix ASAP.
When you sign in to Adobe.com with the user ID and Password your using in the Creative Cloud and Photoshop does this link https://www.adobe.com/account/my-products-services.html show that the account has a subscription?
Also this is a user forum not a Adobe Customer Services web site. -
I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
PLEASE PLEASE HELP ME .Creative Cloud ConnectionHi Alfred,
I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
1) Go to Start button>> Control panel>> Uninstall a program.
2) Check if you see Browser safeguard there, if yes then uninstall it.
3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
-Ankit -
How do I get signed into Icloud when it says my apple id is valid but not an icloud acct?
How do I get signed into Icloud when it says my apple id is valid but not an icloud acct?
You will have to sign in to I cloud on any of the iOS device with version 5 or above once with your Apple Id to use your Apple Id as I cloud account. So if you have an iPhone iPad or iPod touch with iOS 5 or later.
On your iOS device go to settings > I cloud and sign in and you should be able to use your Apple Id as an icloud Id. -
I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Double Click in ALV TREE doesn't get triggered
Hello All,
Double click event on item in a alv tree report doesn't get triggered. I thought I was doing everything right. Please help me out.
Look at the code below and tell me what else I need to do.
<b>FORM register_events .
Event registration: tell ALV Tree which events shall be passed
from frontend to backend.
DATA: lt_events TYPE cntl_simple_events,
l_event TYPE cntl_simple_event,
l_event_receiver TYPE REF TO lcl_tree_event_receiver.
Frontend registration: get already registered tree events
CALL METHOD g_alv_tree->get_registered_events
IMPORTING
events = lt_events.
Frontend registration: add additional event ids
l_event-eventid = cl_gui_column_tree=>eventid_node_double_click.
APPEND l_event TO lt_events.
Frontend registration: provide new event table to alv tree
CALL METHOD g_alv_tree->set_registered_events
EXPORTING
events = lt_events
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
Register events on backend (ABAP Objects event handling)
CREATE OBJECT l_event_receiver.
SET HANDLER l_event_receiver->node_double_click FOR g_alv_tree.
SET HANDLER l_event_receiver->item_double_click FOR g_alv_tree.
SET HANDLER l_event_receiver->on_function_selected FOR g_toolbar.
ENDFORM. " register_events</b>
When I double click on item on the report double click event doesnt trigger. what could be the problem? Any sample programs?
Thanks,
ChandniHi,
Here is a sample code for you.
report ztree.
TABLES : vbak.
DATA: BEGIN OF mylist OCCURS 50. " Internal table hierarchy
INCLUDE STRUCTURE snodetext.
DATA: END OF mylist.
DATA: f15 TYPE c.
DATA :
BEGIN OF gt_sales OCCURS 0,
vbeln LIKE vbak-vbeln,
kunnr LIKE vbak-kunnr,
matnr LIKE vbap-matnr,
arktx LIKE vbap-arktx,
END OF gt_sales.
SELECT-OPTIONS : s_vbeln FOR vbak-vbeln.
START-OF-SELECTION.
SET PF-STATUS 'ZTREE1'.
SET TITLEBAR 'T1'.
Fill internal table with pseudo-data
PERFORM fill_itab.
Hierarchy output
PERFORM main.
*& Form FILL_ITAB
text
--> p1 text
<-- p2 text
FORM fill_itab .
*Fill the gt_sales table
SELECT vkvbeln vkkunnr vpmatnr vparktx INTO CORRESPONDING FIELDS OF
TABLE gt_sales
FROM ( vbak AS vk INNER JOIN vbap AS vp ON vkvbeln = vpvbeln )
WHERE vk~vbeln IN s_vbeln.
SORT gt_sales BY vbeln kunnr.
*Fill the root
mylist-name = 'Report Tree List'.
mylist-color = 1.
mylist-intensiv = '1'.
mylist-text = 'Report Tree List'.
mylist-tlength = 16.
mylist-tlevel = 1.
mylist-tcolor = 1.
mylist-tintensiv = '1'.
mylist-text1 = 'using "RS_TREE_CONSTRUCT" function'.
mylist-tlength1 = 50.
mylist-tcolor1 = 2.
mylist-tintensiv1 = '0'.
APPEND mylist.
LOOP AT gt_sales.
ON CHANGE OF gt_sales-vbeln.
mylist-name = 'level1'.
mylist-color = 0.
mylist-intensiv = '0'.
mylist-text = 'Sales Document no:'.
mylist-tlength = 20.
mylist-tlevel = 2.
mylist-tcolor = 7.
mylist-tintensiv = '1'.
mylist-text1 = gt_sales-vbeln.
mylist-tlength1 = 30.
mylist-tcolor1 = 2.
mylist-tintensiv1 = '0'.
APPEND mylist.
ENDON.
ON CHANGE OF gt_sales-kunnr.
mylist-name = 'level2'.
mylist-color = 0.
mylist-intensiv = '0'.
mylist-text = 'Customer no:'.
mylist-tlength = 20.
mylist-tlevel = 3.
mylist-tcolor = 5.
mylist-tintensiv = '1'.
mylist-text1 = gt_sales-kunnr.
mylist-tlength1 = 30.
mylist-tcolor1 = 3.
mylist-tintensiv1 = '0'.
APPEND mylist.
ENDON.
mylist-name = 'level3'.
mylist-color = 0.
mylist-intensiv = '0'.
mylist-text = gt_sales-matnr.
mylist-tlength = 15.
mylist-tlevel = 4.
mylist-tcolor = 4.
mylist-tintensiv = '0'.
mylist-text1 = gt_sales-arktx.
mylist-tlength1 = 30.
mylist-tcolor1 = 2.
mylist-tintensiv1 = '0'.
APPEND mylist.
ENDLOOP.
ENDFORM. " FILL_ITAB
*& Form MAIN
text
--> p1 text
<-- p2 text
FORM main .
PERFORM hierarchy. " construct & draw the tree
ENDFORM. " MAIN
*& Form HIERARCHY
text
--> p1 text
<-- p2 text
FORM hierarchy .
PERFORM build_tree.
PERFORM draw_tree.
ENDFORM. " HIERARCHY
FORM BUILD_TREE *
Builds the tree from internal table *
Uses the Function module RS_TREE_CONSTRUCT *
FORM build_tree.
CALL FUNCTION 'RS_TREE_CONSTRUCT'
TABLES
nodetab = mylist
EXCEPTIONS
tree_failure = 1.
ENDFORM. "build_tree
FORM DRAW_TREE *
Builds the tree from internal table *
Uses the Function module RS_TREE_DISPLAY *
FORM draw_tree.
sy-lsind = 0.
CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
EXPORTING
callback_program = 'ZREPORT_TREE'
callback_user_command = 'NODE_SELECT'
IMPORTING
f15 = f15.
ENDFORM. "draw_tree
FORM NODE_SELECT *
Handles selection of nodes *
FORM node_select TABLES knoten STRUCTURE seucomm
USING command
CHANGING exit
list_refresh.
Processing of commands for hierarchy list
CASE command.
WHEN 'DISP'.
CASE knoten-id.
WHEN '000002'.
*Display Sales Order
SET PARAMETER ID 'AUN' FIELD knoten-text1.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
WHEN '000003'.
*Display Customer
SET PARAMETER ID 'KUN' FIELD knoten-text1.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDCASE.
list_refresh = 'X'.
ENDFORM. "node_select
Maybe you are looking for
-
Problem with image resize after canvas resize in CS6
In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same. Here is the process I am using: Duplicate the layer and then hide it. Resize
-
Laptop won't power on without AC adapter
Hello, can someone help me?? I currently using dell inspiron 14R, 5437. I bought it last year and after 11 month using it, i found a major problem. At first my dell cannot charging up the battery, the notif tray says "pluged in not charging". So i us
-
What is the part number for the fan for the dv7 2270 us
what is the part number for the fan for the dv7 2270 us
-
I must translate some texts from the Room Creation Wizard. I can find the bundle with them in the PAR file "com.sap.netweaver.coll.appl.ui.room.par", but when I add the iview "pcd:portal_content/com.sap.pct/Collaboration/iViews/com.sap.netweaver.coll
-
Revision: 17565 Revision: 17565 Author: [email protected] Date: 2010-09-02 17:30:08 -0700 (Thu, 02 Sep 2010) Log Message: Fix FM-937: ProxyElement dispatches trait events for blocked and overridden traits. Add unit test. Ticket Links: http