Certificate empty in registry. No IP connected to SQL Server instance

Hello,
I have a SQL Server 2008r2 instance running on Windows 2008 clustered physical server. The instance starts, then fails with the following:
2014-01-02 08:41:28.82 Server      Error: 26054, Severity: 16, State: 1.
2014-01-02 08:41:28.82 Server      Could not find any IP address that this SQL Server instance depends upon. Make sure that the cluster service is running, that the dependency relationship between SQL Server and Network Name resources
is correct, and that the IP addresses on which this SQL Server instance depends are available. Error code: 0x103.
2014-01-02 08:41:28.82 Server      Error: 17182, Severity: 16, State: 1.
2014-01-02 08:41:28.82 Server      TDSSNIClient initialization failed with error 0x103, status code 0xa. Reason: Unable to initialize the TCP/IP listener. No more data is available.
2014-01-02 08:41:28.82 Server      Error: 17182, Severity: 16, State: 1.
2014-01-02 08:41:28.82 Server      TDSSNIClient initialization failed with error 0x103, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. No more data is available.
2014-01-02 08:41:28.82 Server      Error: 17826, Severity: 18, State: 3.
2014-01-02 08:41:28.82 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-01-02 08:41:28.82 Server      Error: 17120, Severity: 16, State: 1.
2014-01-02 08:41:28.82 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I found: http://support.microsoft.com/kb/2023869. I believe this will resolve my issue, however the command is not quite right. I cannot execute as in the article, but I can run certutil
-store.   There are 4 certificates in the file. Which do I use? Excerpt of file below - there are 0-3 Certificates in the file.
CA
================ Certificate 0 ================
Serial Number: 06376c00aa00648a11cfb8d4aa5c53f4 (numbers changed to protect the innocent)
Issuer: CN=Root Agency
NotBefore: 5/28/1996 4:02 PM
NotAfter: 12/31/2039 5:59 PM
Subject: CN=Root Agency
Signature matches Public Key
Root Certificate: Subject matches Issuer
Template:
Cert Hash(sha1): fe e4 49 ee 0e 39 65 a5 24 6f 00 0e 87 fd e2 a0 65 fd 98 d4 ((numbers changed to protect the innocent)
No key provider information
Cannot find the certificate and private key for decryption.
My certificate value under this registry key is empty.
Any help appreciated,
Dianne
Dianne

Hello ,
Please check below link
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cc39d8cb-bc64-48e6-8368-24886481dd4f/sql-server-cluster-sql-server-resource-not-coming-online?forum=sqlsetupandupgrade
http://blogs.technet.com/b/taraj/archive/2009/01/07/could-not-find-any-ip-address-that-this-sql-server-instance-depends-upon.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Similar Messages

Cannot not connect to SQL Server instance.

Hello,
I have SQL Server 2012 installed and when I run this command:
sc query mssql$MSSQLSERVER
I get this error:
[SC] EnumQueryServicesStatus:OpenService FAILED 1060:
The specified service does not exist as an installed service.
I run this command on the same server where SQL Server is installed. Databases are on the same server too. TCP/IP is enabled for the instance and port 1433 is open on the server's firewall. SQL Server Browser is running.
Many errors in the SQL Server error logs like:
SQLServer Error: 11001, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct.
SQLServer Error: 11001, TCP Provider: No such host is known. [SQLSTATE 08001]
Any ideas what could have gone wrong?
Thanks,
Paul
Paul

Hi Paul,
According to your description, you fail to connect to SQL Server 2012 instance. According to the SQL Server error log, based on my research, your issue could be due to that
the client cannot resolve the name of the SQL Server instance.
Are the errors from the SQL Server error log solved? If the errors are not solved, please follow the steps below to troubleshoot the issue.
1. Make sure you are able to ping the physical server where SQL Server is installed from the client machine. If not, you can try to connect to the SQL Server using an IP Address (for default instance) or IP Address\Instance Name
for a named instance.
2. Make sure you are using the correct instance name. When you connect to a default instance, machine name is the best representative for the instance name and when you connect to a named instance such as sqlexpress, you should
specify machinename\instancename according to
Niting123’s post. And you could verify if you use the right instance name in SQL Server configuration manager according to
Niting123’s post.
3. Check that SQL Server is in the network. You can use the SQLCMD -L command to retrieve the list of SQL Server installed in the network. Note that this will only return SQL Servers if the SQL Server Browser service is running.
4. Make sure that you enable Named Pipes besides TCP/IP protocol.
5. Check to see if remote connections is enabled. Right click on the server name in SSMS and select Properties. Go to the Connections tab and make sure Allow remote connection to this server is checked.
6. Locally connect to SQL Server and check the error log for the port entry.
7. To connect to SQL Server instance using TCP/IP from another computer, on the SQL Server computer, you must configure the firewall to allow connections to the TCP port used by the Database Engine. If you are connecting to a named
instance or a port other than TCP port 1433, you must also open the UDP port 1434 for the SQL Server Browser service according to pasquale’s post.
For step by step instruction on opening a port in the Windows firewall, see
How to: Configure a Windows Firewall for Database Engine Access
For more information about the process, please refer to the article:
http://www.mssqltips.com/sqlservertip/2340/resolving-could-not-open-a-connection-to-sql-server-errors/
In addition, you mention that there are many other errors, so please provide the SQL Server error log for analysis.
Regards,
Michelle Li

Cannot connect to the specified SQL Server instance

I am trying to install Microsoft System Center 2012 R2 Virtual Machine Management.
I am getting the following error:
Setup cannot connect to the specified SQL Server instance.
Ensure that the server name, isntance name, and, if speceified, port number are correct. If you are installing VMM remotely, ensure that remote connections are set up correctly, and then try Setup again.
I have installed the
Microsoft® SQL Server® 2008 R2 Command Line Utilities
but have not set up any SQL Server instances.
how should i proceed?
Edit:
The followign fields are configured:
Server Name: The name of the machine i am using
Port: <empty>
Use the following credentials <NOT ticked>
Instance name <empty> (the drop down is empty)
New Database <Ticked> : VirtualManagerDB

Is SQL server is properly installed on the system?
Are you able to connect with SQL server instance?
As per the given details looks, only client utilities installed and trying to create the database which needs SQL server.
Make sure you are able to connect with the "ServerName\InstanceName,PortNumber" and hope installing the system as per below article:
http://technet.microsoft.com/en-us/library/gg610656.aspx
Hope it help!
Please click the Mark as answer button and vote as helpful if this reply solves your problem

How to secure connection in sql server 2008? my main problem is which certificate should i add in mmc

i'm recently working on hardening of sql server 2008. now i face with a problem. my problem is how to secure connection in sql server 2008? my main problem is which certificate should i add in mmc? what are these certificates about?and guide
me in choosing the appropriate certificate.
and how should i know that the connection in sql server is secured?
plz guide me from the beginning cause i'm rookie in this subject.
thanks in advance.

Hi sqlfan,
Question 1: my problem is how to secure connection in sql server 2008?
Microsoft SQL Server can use Secure Sockets Layer (SSL) to encrypt data that is transmitted across a network between an instance of SQL Server and a client application. For more information about Encrypting Connections to SQL Server, please refer to the following
article:
http://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
Question 2: my main problem is which certificate should i add in mmc? what are these certificates about?and guide me in choosing the appropriate certificate.
To install a certificate in the Windows certificate store of the server computer, you will need to purchase/provision a certificate from a certificate authority first. So please go to a certificate authority to choose the appropriate certificate.
For SQL Server to load a SSL certificate, the certificate must meet the following conditions:
The certificate must be in either the local computer certificate store or the current user certificate store.
The current system time must be after the Valid from property of the certificate and before the Valid to property of the certificate.
The certificate must be meant for server authentication. This requires the Enhanced Key Usage property of the certificate to specify Server Authentication (1.3.6.1.5.5.7.3.1).
The certificate must be created by using the KeySpec option of AT_KEYEXCHANGE. Usually, the certificate's key usage property (KEY_USAGE) will also include key encipherment (CERT_KEY_ENCIPHERMENT_KEY_USAGE).
The Subject property of the certificate must indicate that the common name (CN) is the same as the host name or fully qualified domain name (FQDN) of the server computer. If SQL Server is running on a failover cluster, the common name must match the host
name or FQDN of the virtual server and the certificates must be provisioned on all nodes in the failover cluster.
Question 3: how should i know that the connection in sql server is secured?
If the certificate is configured to be used, and the value of the ForceEncryption option is set to Yes, all data transmitted across a network between SQL Server and the client application will be encrypted using the certificate. For more detail about this,
please refer to Configuring SSL for SQL Server in the following article:
http://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
If you have any question, please feel free to let me know.
Regards,
Donghui Li

Azure Webjobs with EF DB - A network-related or instance-specific error occurred while establishing a connection to SQL Server

Hi,
I have been trying to get a very simple WebJob developed and deployed onto Azure with little to no luck. I have a MVC Website which has a common project which handles my Data Access Layer with Entity Framework. I have created a WebJob project
using Visual Studio and added the following lines of code to the Manual Trigger Function
[NoAutomaticTrigger]
public static void ManualTrigger(TextWriter log, int value, [Queue("queue")] out string message)
RitualDBEntities db = new RitualDBEntities();
log.WriteLine("Function is invoked with value={0}", value);
List<Location> locations = db.Locations.ToList();
string msg = string.Empty;
foreach (Location location in locations)
msg += location.Name;
message = msg;
log.WriteLine("Following message will be written on the Queue={0}", message);
In my app.config of my WebJob i have the following connection strings:
<add name="RitualDBEntities" connectionString="metadata=res://*/RitualDBEntities.csdl|res://*/RitualDBEntities.ssdl|res://*/RitualDBEntities.msl;provider=System.Data.SqlClient;provider connection string="data source=ritual-pc\sqlexpress;initial catalog=RitualDB;integrated security=True;persist security info=False;MultipleActiveResultSets=True;App=EntityFramework"" providerName="System.Data.EntityClient" />
<add name="RitualContext" connectionString="Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=RitualDB;Data Source=ritual-pc\sqlexpress" providerName="System.Data.SqlClient" />
<add name="AzureWebJobsDashboard" connectionString="DefaultEndpointsProtocol=https;AccountName=ritual***;AccountKey=tQAP0gyMYKtWPJeIbsqk2iT2k69gyd1FwcyRf3+5Mc9b9EdYzpj0Dq8X2VHUmF*****"/>
<add name="AzureWebJobsStorage" connectionString="DefaultEndpointsProtocol=https;AccountName=ritual***;AccountKey=tQAP0gyMYKtWPJeIbsqk2iT2k69gyd1FwcyRf3+5Mc9b9EdYzpj0Dq8X2VHUmF*****" />
When i test locally (F5 Debugging) the webjob runs successfully and does the loop of the objects returned from the database. When i deploy this Azure the WebJob fails with the following error:
[03/29/2015 22:07:39 > 6ca05b: SYS INFO] Status changed to Initializing
[03/29/2015 22:07:41 > 6ca05b: SYS INFO] Run script 'Ritual.WebJobs.Members.exe' with script host - 'WindowsScriptHost'
[03/29/2015 22:07:41 > 6ca05b: SYS INFO] Status changed to Running
[03/29/2015 22:07:44 > 6ca05b: INFO] Found the following functions:
[03/29/2015 22:07:44 > 6ca05b: INFO] Ritual.WebJobs.Members.Functions.ManualTrigger
[03/29/2015 22:07:44 > 6ca05b: INFO] Executing: 'Functions.ManualTrigger' because This was function was programmatically called via the host APIs.
[03/29/2015 22:08:01 > 6ca05b: INFO] Function had errors. See Azure WebJobs SDK dashboard for details. Instance id is e99d7205-3ca0-4674-9414-f0381d5c2316
[03/29/2015 22:08:01 > 6ca05b: ERR ]
[03/29/2015 22:08:01 > 6ca05b: ERR ] Unhandled Exception: System.Data.Entity.Core.EntityException: The underlying provider failed on Open. ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.DbConnectionDispatcher.<Open>b__36(DbConnection t, DbConnectionInterceptionContext c)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.InternalDispatcher`1.Dispatch[TTarget,TInterceptionContext](TTarget target, Action`2 operation, TInterceptionContext interceptionContext, Action`3 executing, Action`3 executed)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.DbConnectionDispatcher.Open(DbConnection connection, DbInterceptionContext interceptionContext)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.<Open>b__2()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.<>c__DisplayClass1.<Execute>b__0()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute(Action operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of inner exception stack trace ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectContext.EnsureConnection(Boolean shouldMonitorTransactions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectContext.ExecuteInTransaction[T](Func`1 func, IDbExecutionStrategy executionStrategy, Boolean startLocalTransaction, Boolean releaseConnectionOnSuccess)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.<>c__DisplayClass7.<GetResults>b__5()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.<System.Collections.Generic.IEnumerable<T>.GetEnumerator>b__0()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Internal.LazyEnumerator`1.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Ritual.WebJobs.Members.Functions.ManualTrigger(TextWriter log, Int32 value, String& message)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at lambda_method(Closure , Object[] )
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.VoidInvoker.InvokeAsync(Object[] arguments)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithWatchersAsync>d__23.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithOutputLogsAsync>d__1c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithLogMessageAsync>d__c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithLogMessageAsync>d__c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<TryExecuteAsync>d__1.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.ExceptionDispatchInfoDelayedException.Throw()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.JobHost.<CallAsyncCore>d__7.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.JobHost.Call(MethodInfo method, Object arguments)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Ritual.WebJobs.Members.Program.Main()
[03/29/2015 22:08:01 > 6ca05b: SYS INFO] Status changed to Failed
[03/29/2015 22:08:01 > 6ca05b: SYS ERR ] Job failed due to exit code -532462766
If i remove any of my database code and use just the basic Stub code my webjob will run successfully so i know that my connection strings (outside of the DB ones) are correct. My MVC web application also runs perfectly using the same connection strings
in Azure so i also know that they have also been configured.
I am now lost and need some guidance, so if someone is able to assist me that would be much appreciated.
Thanks
Ritual.

Can you try to log the connection string you are using in both cases to make sure they are the same?
Also can you share your site name, either directly or indirectly?
This will help us investigate.
Thanks,
Amit

Unable to establishing a connection to SQL Server created via SqlManagementClient

Goal:
create an Azure SQL Server via .NET (Microsoft.WindowsAzure.Management.Sql.Modules.SqlManagementClient) and add a database to it.
Problem:
I am NOT able to access the newly created server from .Net code.
Description:
Using SqlManagementClient I SUCCESFULLY create a new Azure SQL Server (see code below).
After creating the server, I am able to access the new server from Azure Portal.
* firewall rule show valid client machine
* "Windows Azure Services" is set to "Yes"
An error occures when I try connecting to the database using the same user and pwd used to create it.
/* the following code results in a connection failure */
//string server = <name of newly created sql server>
//string db = <name of new database to create, inside of the server>
public void CreateDatabase(string server, string db)
using (ReliableSqlConnection conn = new ReliableSqlConnection(
                Configuration.GetConnectionString(server, "Master"),
                SqlRetryPolicy,
                SqlRetryPolicy))
                conn.Open(); //// throws System.Data.SqlClient.SqlException
    //// A network-related or instance-specific error occurred while establishing a connection to SQL Server.
                SqlCommand cmd = conn.CreateCommand();
/* the following code creates a sql server and firewall rules */
ServerCreateResponse response;
SubscriptionCloudCredentials creds;
X509Certificate2 cert;
//// Gets the certificate
cert = CredentialUtil.GetCertificate(certificateStoreName, certificateStoreLocation, certificateThumbprint);
//// Using the certificate and the subscription build credential
creds = new CertificateCloudCredentials(azureSubscriptionId, cert);
//// using creditials create server and set firewall rules
using (SqlManagementClient client = new SqlManagementClient(creds))
        response = client.Servers.Create(new ServerCreateParameters()
                AdministratorPassword = sqlPwd,
                AdministratorUserName = sqlUser,
        Location = location
        if (response.StatusCode == HttpStatusCode.Created)
  //// 0.0.0.0 is added to enable "Windows Azure Services" on the "Configure" tab.
  //// <MyInternetIp> would be my actual IP address.
  //// - (which works for other servers that i have manualy registered
  validIPs = new List<string>() {"0.0.0.0", "<MyInternetIp>"};
  CreateFireWallRule(client, response.ServerName, validIPs);
//// Adds IP to Azure firewall.
private static void CreateFireWallRule(SqlManagementClient client, string azureServerName, IEnumerable<string> validIPs)
            foreach (string ip in validIPs)
                FirewallRuleCreateParameters rule = new FirewallRuleCreateParameters() { Name = string.Format("Allow {0} - {1}", Environment.MachineName, ip), StartIPAddress
= ip, EndIPAddress = ip };
                client.FirewallRules.Create(azureServerName, rule);
/// Error
System.Data.SqlClient.SqlException was unhandled
HResult=-2146232060
Message=A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source=.Net SqlClient Data Provider
ErrorCode=-2146232060
Class=20
LineNumber=0
Number=53
Server=""
State=0

Using SqlManagementClient I SUCCESFULLY create a new Azure SQL Server.
ServerCreateResponse response;
SubscriptionCloudCredentials creds;
X509Certificate2 cert;
cert = CredentialUtil.GetCertificate(parameters.CertificateStoreName, parameters.CertificateStoreLocation, parameters.CertificateThumbprint);
creds = new CertificateCloudCredentials(parameters.AzureSubscriptionId, cert);
using (SqlManagementClient client = new SqlManagementClient(creds))
                response = client.Servers.Create(new ServerCreateParameters()
                    AdministratorPassword = parameters.SqlPwd,
                    AdministratorUserName = parameters.SqlUser,
                    Location = parameters.Location
                if (response.StatusCode == HttpStatusCode.Created)
                    CreateFireWallRule(client, response.ServerName, parameters.ValidIPs);

Central Administration shows error 26 - A network-related or instance-specific error occurred while establishing a connection to SQL Server

Hello
i Follow
this Article to Config FBA , BUT after Step 3 , My Central Administration shows an Error :
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 – Error Locating Server/Instance Specified)
Correlation ID: 89651359-9c57-4241-8254-eb3be052c4f0
Now , i cannot access to my Central Admin Setting , but my site Collections works well....
i Rollback all setting but no Effect !!!!!
i execute iisreset but nothing !!!!
what should i do?
please help me.. Thanks in Advanced
When i was checking EventViewer , i saw an Event log :
The Forefront Identity Manager Service cannot connect to the SQL Database Server. The SQL Server could not be contacted. The connection failure may be due to a network failure, firewall configuration error, or other connection issue. Additionally,
the SQL Server connection information could be configured incorrectly. Verify that the SQL Server is reachable from the Forefront Identity Manager Service computer. Ensure that SQL Server is running, that the network connection is active, and that the firewall
is configured properly. Last, verify the connection information has been configured properly. This configuration is stored in the Windows Registry.
Is there any relation between this message And my Problem!!!???

hi Mr Thuan
Soldier
i checked
some of your Solution like SQLService (Was OK) , Allow Remote connection (was OK & has check mark), Restart SqlService (Done Successfully), Network Card Driver (my Connection is OK) before , but didnot check SQL
Service account & i will do Soon,
but
i did not any changes on Firewall or IP ... i change IIS setting (through
this
Article ) ,
Do these settings have any effect on IP or firewall ?
thanks
mohamamd
MBS - social.technet.microsoft.com Forum

Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

Hello friends..i m not able to connect MS SQL SERVER 2005 FROM cmd prompt

dear friends,
i m not able to connect MS SQL SERVER from command prompt..
do you know how to connect from command prompt or any other ways to connect to database only for delete SAP* user purpose.
thanks
zaheer

Hi,
you can use the SQLCMD tool:
Microsoft (R) SQL Server Command Line Tool
Version 10.50.1600.1 NT x64
Copyright (c) Microsoft Corporation. All rights reserved.
usage: Sqlcmd            [-U login id]          [-P password]
[-S server]            [-H hostname]          [-E trusted connection]
[-N Encrypt Connection][-C Trust Server Certificate]
[-d use database name] [-l login timeout]     [-t query timeout]
[-h headers]           [-s colseparator]      [-w screen width]
[-a packetsize]        [-e echo input]        [-I Enable Quoted Identifiers]
[-c cmdend]            [-L[c] list servers[clean output]]
[-q "cmdline query"]   [-Q "cmdline query" and exit]
[-m errorlevel]        [-V severitylevel]     [-W remove trailing spaces]
[-u unicode output]    [-r[0|1] msgs to stderr]
[-i inputfile]         [-o outputfile]        [-z new password]
[-f <codepage> | i:<codepage>[,o:<codepage>]] [-Z new password and exit]
[-k[1|2] remove[replace] control characters]
[-y variable length type display width]
[-Y fixed length type display width]
[-p[1] print statistics[colon format]]
[-R use client regional setting]
[-b On error batch abort]
[-v var = "value"...] [-A dedicated admin connection]
[-X[1] disable commands, startup script, enviroment variables [and exit]]
[-x disable variable substitution]
[-? show syntax summary]
You have to have the SQL Server tools installed on the box, to get sqlcmd.
You then can connect with SQL authentication
sqlcmd -S <Servername\Instancename> -U user -P password
or with windows authentication
sqlcmd -S <Servername\Instancename> -E
Best regards
Clas

Unable to connect to sql server 2008 r2 after upgrading from framework 4.0 to 4.5.2 in windows 7 environment

Hi All,
BackGround
I used to connect to database with Encrypt set true in sql connection which helps established encrypted data base connection . I verified that created certificate in order
to provide Encrypted connection to database for client is valid.
Issue :Issue
is un-able to connect to sql sever2008 r2 from vs2013 by enforcing encryption to true.
while trying to test the connection from vs2013 error log getting recorded as well as error notification is getting populated as below .
Step1 :
from Vs2013 trying to connect to sql server 2008 r2
step 2: on Click test Connection . getting below mentioned error notification
Event Viewer Log:<o:p></o:p>
<o:p></o:p>
(Process Id: 7472)
<o:p></o:p>
.Net SqlClient Data Provider:<o:p></o:p>
A connection was successfully established with the server, but then an error
occurred during the login process. (provider: SSL Provider, error: 0 - The
target principal name is incorrect.)<o:p></o:p>
   at
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception,
Boolean breakConnection, Action`1 wrapCloseInAction)<o:p></o:p>
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)<o:p></o:p>
   at
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle,
SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean
callerHasConnectionLock)<o:p></o:p>
   at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean
canAccumulate)<o:p></o:p>
   at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte
flushMode, Boolean canAccumulate)<o:p></o:p>
   at System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec,
FeatureExtension requestedFeatures, SessionData recoverySessionData)<o:p></o:p>
   at
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo
serverInfo, String newPassword, SecureString newSecurePassword, Boolean
ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)<o:p></o:p>
   at
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo
serverInfo, String newPassword, SecureString newSecurePassword, Boolean
redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential
credential, TimeoutTimer timeout)<o:p></o:p>
   at
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer
timeout, SqlConnectionString connectionOptions, SqlCredential credential,
String newPassword, SecureString newSecurePassword, Boolean
redirectedUserInstance)<o:p></o:p>
   at
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity
identity, SqlConnectionString connectionOptions, SqlCredential credential,
Object providerInfo, String newPassword, SecureString newSecurePassword,
Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions,
SessionData reconnectSessionData)<o:p></o:p>
   at
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions
options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo,
DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions
userOptions)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool
pool, DbConnection owningObject, DbConnectionOptions options,
DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection
owningObject, DbConnectionOptions userOptions, DbConnectionInternal
oldConnection)<o:p></o:p>
   at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection
owningObject, DbConnectionOptions userOptions, DbConnectionInternal
oldConnection)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection
owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate,
Boolean onlyOneCheckConnection, DbConnectionOptions userOptions,
DbConnectionInternal& connection)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection
owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions,
DbConnectionInternal& connection)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection
owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions
userOptions, DbConnectionInternal oldConnection, DbConnectionInternal&
connection)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection
outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1
retry, DbConnectionOptions userOptions)<o:p></o:p>
   at
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)<o:p></o:p>
   at
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)<o:p></o:p>
   at System.Data.SqlClient.SqlConnection.Open()<o:p></o:p>
Inner Exception:<o:p></o:p>
:<o:p></o:p>
The target principal name is incorrect

The target principal name is incorrect
Hi Rahul.U,
Are you able to connect to SQL Server successfully from SQL Server Management Studio (SSMS) when enforcing encryption?
According to above error message, it could be caused by the inappropriate server name or incorrect TrustServerCertificate configuration in the connection string from Visual Studio. There are some proposals for you troubleshooting this error.
1. Make sure that you connect to the SQL server using the fully qualified domain name (FQDN).
2. When connecting to a SQL Server instance with a valid certificate, please add the
TrustServerCertificate
parameter and set it to true in the connection string. For more details, please review this
article.
However, if you can successfully connect to SQL Server via SSMS, but still fail to connect to SQL Server from Visual Studio, I would like to recommend you post the question in the .Net Framework forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=netdevelopment . It is appropriate and more experts will assist you.
There are similar articles about error “The target principal name is incorrect” for your reference.
http://serverfault.com/questions/458935/aws-rds-sql-server-ssl-connection-the-target-principal-name-is-incorrect
http://www.derekseaman.com/2013/09/sql-2012-failover-cluster-pt-12-kerberos-n.html
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

How do I connect to SQL Server with Muse?

I want to query items from database and load it back to front end. Is there a way Muse can connect to sql server database?

You cannot connect to databases via Muse at the moment. Please refer: http://forums.adobe.com/message/5090145#5090145
Cheers,
Vikas

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

Hi All,
I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
Here is my server.xml
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<GlobalNamingResources>
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<Resource auth="Container" description="Users and Groups
Database" name="UserDatabase"
scope="Shareable"
type="org.apache.catalina.UserDatabase"/>
<Resource name="jdbc/DefaultDS" scope="Shareable"
type="javax.sql.DataSource"/>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.
MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<ResourceParams name="jdbc/DefaultDS">
<parameter>
<name>validationQuery</name>
<value></value>
</parameter>
<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>4</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>2</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>

<Service name="Tomcat-Standalone">
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/DefaultDS">

<parameter>
<name>maxActive</name>
<value>8</value>
</parameter>

<parameter>
<name>maxIdle</name>
<value>4</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>

<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>

<parameter>
<name>description</name>
<value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Host>
</Engine>
</Service>
</Server>
and my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">

<web-app>
<resource-ref>
<res-ref-name>jdbc/DefaultDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
Connection con = ds.getConnection();
return con;
I tried connecting as mentioned in this website
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
Please help urgent
Sorry for long file. Can any one please help me in solving this problem.
Thanks in advnace
Kurakula

I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
MOD

How can I Connect to SQL Server or other RDBMS like Sybase from Form 6i

I want to connect Connect to SQL Server or other RDBMS like Sybase from Form 6i. I kniow that I need some gateway product but I don't know the name of the product?Can i use some other technology to do the same like client software etc.
I need this help urgently?

Check the following link.
http://www.oracle.com/technology/products/gateways/index.html

How can i connect to SQL Server 7.0 on Windons Using JDBC

How can i connect to Microsoft SQL Server 7.0 on a windows enviroment ?
in sql server 2000 some jar files are required that is
What you need to do is actually add all three jar files to your class path individually. There are three jar files that come with this driver the msbase.jar, msutil.jar, and mssqlserver.jar. for sqlQ server 2000.
now the problem is that i cant find these files on my system. firstly where these files will be located. secondly are they will be used to connect to SQL Server 7.0. thirdly if not what is the procedure.
My next Problem is that I have Websphere Studio Application Developer. in which their is this facility of Database Webpages its like a wizard which makes automatically beans servlets and JSP but before that you need a Driver Name and and Class Name for to Connect to the Database.
Can you tell what is the specific Driver Path for the Microsoft SQL Server 7.0 . secondly is this the class which is used to connect to SQL server 7.0 "com.microsoft.jdbc.sqlserver.SQLServerDriver" where can i find this one. for SQL server 7.0.
please provide some guidance in this regard.

You can search for the JDBC drivers at, http://industry.java.sun.com/products/jdbc/drivers
All the three jars that you specified are part of MsSQL Server jdbc driver. You need them (in the classpath) to get connected to the database.
"com.microsoft.jdbc.sqlserver.SQLServerDriver" is the class in mssqlserver.jar. This is the driver class which will be used to get connected to the database.
You can search in this forum for writting jdbc code (for Sql Server). If you don't find these jars, give me your e-mail id.
Sudha

Certificate empty in registry. No IP connected to SQL Server instance

Similar Messages

Maybe you are looking for