Certificate Revocation List not working on ASA 8.3(1)

I've configured my SSL VPN to certificate authentication, in wich the authentication with certificates is working fine. However the ASA is not able to store (cache) the CRL.
Based on debug bellow the asa downloads the CRL file but is not able to open it.
Does anyone know this sitation?
Here is te debug output:
fwlpasa01/pri/act# crypto ca crl request SSL-VPN
CRYPTO_PKI: CRL is being polled from CDP http://10.151.1.9/certlist/certcrl.crl.
crypto_pki_req(7ae32bf0, 24, ...)
CRYPTO_PKI: Crypto CA req queue size = 1.
Crypto CA thread wakes up!
CRYPTO_PKI: http connection opened
CRYPTO_PKI: content dump count 75----------
CRYPTO_PKI: For function crypto_http_send
GET /certlist/certcrl.crl HTTP/1.0
Host: 10.151.1.9
CRYPTO_PKI: For function crypto_http_send
CRYPTO_PKI: content dump-------------------
CRYPTO_PKI: HTTP response header:
HTTP/1.1 200 OK
Cache-Control: private
Content-Length: 1482
Content-Type: application/pkix-crl
Server: Microsoft-IIS/7.5
Set-Cookie: ASPSESSIONIDACBQATBA=IEGHHGMBOHNIGEJIEPJKCFCE; path=/
Date: Mon, 26 Nov 2012 15:47:38 GMT
Connection: close
CRYPTO_PKI: CRL data2d 2d 2d 2d 2d 42 45 47 49 4e 20 58 35 30 39 20    | -----BEGIN X509
43 52 4c 2d 2d 2d 2d 2d 0d 0a 4d 49 49 45 44 44    | CRL-----..MIIEDD
43 43 41 76 51 43 41 51 45 77 44 51 59 4a 4b 6f    | CCAvQCAQEwDQYJKo
5a 49 68 76 63 4e 41 51 45 46 42 51 41 77 57 54    | ZIhvcNAQEFBQAwWT
45 53 4d 42 41 47 43 67 6d 53 4a 6f 6d 54 38 69    | ESMBAGCgmSJomT8i
78 6b 41 52 6b 57 41 6e 70 73 0d 0a 4d 52 4d 77    | xkARkWAnps..MRMw
45 51 59 4b 43 5a 49 6d 69 5a 50 79 4c 47 51 42    | EQYKCZImiZPyLGQB
47 52 59 44 61 57 35 30 4d 52 67 77 46 67 59 4b    | GRYDaW50MRgwFgYK
43 5a 49 6d 69 5a 50 79 4c 47 51 42 47 52 59 49    | CZImiZPyLGQBGRYI
65 6d 6c 73 62 47 39 79 5a 57 34 78 0d 0a 46 44    | emlsbG9yZW4x..FD
41 53 42 67 4e 56 42 41 4d 54 43 31 70 4a 54 45    | ASBgNVBAMTC1pJTE
78 50 55 6b 56 4f 4c 55 4e 42 46 77 30 78 4d 6a    | xPUkVOLUNBFw0xMj
45 78 4d 54 6b 78 4e 6a 4d 7a 4d 44 68 61 46 77    | ExMTkxNjMzMDhaFw
30 78 4d 6a 45 78 4d 6a 63 77 4e 44 55 7a 0d 0a    | 0xMjExMjcwNDUz..
4d 44 68 61 4d 46 63 77 47 77 49 4b 52 66 65 4b    | MDhaMFcwGwIKRfeK
6b 67 41 41 41 41 41 42 67 52 63 4e 4d 54 49 78    | kgAAAAABgRcNMTIx
4d 44 49 35 4d 54 4d 79 4d 7a 41 77 57 6a 41 62    | MDI5MTMyMzAwWjAb
41 67 70 46 31 4f 55 76 41 41 41 41 41 41 47 41    | AgpF1OUvAAAAAAGA
0d 0a 46 77 30 78 4d 6a 45 77 4d 6a 6b 78 4d 7a    | ..Fw0xMjEwMjkxMz
49 7a 4d 44 42 61 4d 42 73 43 43 6a 75 71 30 79    | IzMDBaMBsCCjuq0y
41 41 41 41 41 41 41 58 6f 58 44 54 45 79 4d 54    | AAAAAAAXoXDTEyMT
41 79 4f 54 45 7a 4d 6a 49 77 4d 46 71 67 67 67    | AyOTEzMjIwMFqggg
49 4d 0d 0a 4d 49 49 43 43 44 41 66 42 67 4e 56    | IM..MIICCDAfBgNV
48 53 4d 45 47 44 41 57 67 42 52 73 73 75 79 64    | HSMEGDAWgBRssuyd
63 2b 6c 54 32 66 6a 75 62 39 66 70 7a 67 42 38    | c+lT2fjub9fpzgB8
76 45 36 59 78 54 41 51 42 67 6b 72 42 67 45 45    | vE6YxTAQBgkrBgEE
41 59 49 33 0d 0a 46 51 45 45 41 77 49 42 41 44    | AYI3..FQEEAwIBAD
41 4c 42 67 4e 56 48 52 51 45 42 41 49 43 41 31    | ALBgNVHRQEBAICA1
55 77 48 41 59 4a 4b 77 59 42 42 41 47 43 4e 78    | UwHAYJKwYBBAGCNx
55 45 42 41 38 58 44 54 45 79 4d 54 45 79 4e 6a    | UEBA8XDTEyMTEyNj
45 32 4e 44 4d 77 0d 0a 4f 46 6f 77 67 63 77 47    | E2NDMw..OFowgcwG
41 31 55 64 4c 67 53 42 78 44 43 42 77 54 43 42    | A1UdLgSBxDCBwTCB
76 71 43 42 75 36 43 42 75 49 61 42 74 57 78 6b    | vqCBu6CBuIaBtWxk
59 58 41 36 4c 79 38 76 51 30 34 39 57 6b 6c 4d    | YXA6Ly8vQ049WklM
54 45 39 53 52 55 34 74 0d 0a 51 30 45 73 51 30    | TE9SRU4t..Q0EsQ0
34 39 63 33 5a 73 63 47 46 6b 62 54 4d 78 4c 45    | 49c3ZscGFkbTMxLE
4e 4f 50 55 4e 45 55 43 78 44 54 6a 31 51 64 57    | NOPUNEUCxDTj1QdW
4a 73 61 57 4d 6c 4d 6a 42 4c 5a 58 6b 6c 4d 6a    | JsaWMlMjBLZXklMj
42 54 5a 58 4a 32 61 57 4e 6c 0d 0a 63 79 78 44    | BTZXJ2aWNl..cyxD
54 6a 31 54 5a 58 4a 32 61 57 4e 6c 63 79 78 44    | Tj1TZXJ2aWNlcyxD
54 6a 31 44 62 32 35 6d 61 57 64 31 63 6d 46 30    | Tj1Db25maWd1cmF0
61 57 39 75 4c 45 52 44 50 58 70 70 62 47 78 76    | aW9uLERDPXppbGxv
63 6d 56 75 4c 45 52 44 50 57 6c 75 0d 0a 64 43    | cmVuLERDPWlu..dC
78 45 51 7a 31 36 62 44 39 6b 5a 57 78 30 59 56    | xEQz16bD9kZWx0YV
4a 6c 64 6d 39 6a 59 58 52 70 62 32 35 4d 61 58    | Jldm9jYXRpb25MaX
4e 30 50 32 4a 68 63 32 55 2f 62 32 4a 71 5a 57    | N0P2Jhc2U/b2JqZW
4e 30 51 32 78 68 63 33 4d 39 59 31 4a 4d 0d 0a    | N0Q2xhc3M9Y1JM..
52 47 6c 7a 64 48 4a 70 59 6e 56 30 61 57 39 75    | RGlzdHJpYnV0aW9u
55 47 39 70 62 6e 51 77 67 64 67 47 43 53 73 47    | UG9pbnQwgdgGCSsG
41 51 51 42 67 6a 63 56 44 67 53 42 79 6a 43 42    | AQQBgjcVDgSByjCB
78 7a 43 42 78 4b 43 42 77 61 43 42 76 6f 61 42    | xzCBxKCBwaCBvoaB
0d 0a 75 32 78 6b 59 58 41 36 4c 79 38 76 51 30    | ..u2xkYXA6Ly8vQ0
34 39 57 6b 6c 4d 54 45 39 53 52 55 34 74 51 30    | 49WklMTE9SRU4tQ0
45 73 51 30 34 39 63 33 5a 73 63 47 46 6b 62 54    | EsQ049c3ZscGFkbT
4d 78 4c 45 4e 4f 50 55 4e 45 55 43 78 44 54 6a    | MxLENOPUNEUCxDTj
31 51 0d 0a 64 57 4a 73 61 57 4d 6c 4d 6a 42 4c    | 1Q..dWJsaWMlMjBL
5a 58 6b 6c 4d 6a 42 54 5a 58 4a 32 61 57 4e 6c    | ZXklMjBTZXJ2aWNl
63 79 78 44 54 6a 31 54 5a 58 4a 32 61 57 4e 6c    | cyxDTj1TZXJ2aWNl
63 79 78 44 54 6a 31 44 62 32 35 6d 61 57 64 31    | cyxDTj1Db25maWd1
63 6d 46 30 0d 0a 61 57 39 75 4c 45 52 44 50 58    | cmF0..aW9uLERDPX
70 70 62 47 78 76 63 6d 56 75 4c 45 52 44 50 57    | ppbGxvcmVuLERDPW
6c 75 64 43 78 45 51 7a 31 36 62 44 39 6a 5a 58    | ludCxEQz16bD9jZX
4a 30 61 57 5a 70 59 32 46 30 5a 56 4a 6c 64 6d    | J0aWZpY2F0ZVJldm
39 6a 59 58 52 70 0d 0a 62 32 35 4d 61 58 4e 30    | 9jYXRp..b25MaXN0
50 32 4a 68 63 32 55 2f 62 32 4a 71 5a 57 4e 30    | P2Jhc2U/b2JqZWN0
51 32 78 68 63 33 4d 39 59 31 4a 4d 52 47 6c 7a    | Q2xhc3M9Y1JMRGlz
64 48 4a 70 59 6e 56 30 61 57 39 75 55 47 39 70    | dHJpYnV0aW9uUG9p
62 6e 51 77 44 51 59 4a 0d 0a 4b 6f 5a 49 68 76    | bnQwDQYJ..KoZIhv
63 4e 41 51 45 46 42 51 41 44 67 67 45 42 41 4a    | cNAQEFBQADggEBAJ
51 6f 2f 78 73 4e 79 34 67 34 31 66 69 45 2b 67    | Qo/xsNy4g41fiE+g
46 4d 31 39 62 65 59 2b 52 77 36 74 4c 61 42 52    | FM19beY+Rw6tLaBR
34 33 58 64 45 7a 46 4d 63 61 0d 0a 72 55 74 2f    | 43XdEzFMca..rUt/
70 39 33 73 63 4c 38 63 45 4a 54 48 6d 42 54 33    | p93scL8cEJTHmBT3
73 33 79 30 50 42 55 59 6d 35 52 58 36 6f 4c 42    | s3y0PBUYm5RX6oLB
41 41 74 4f 42 63 5a 4b 62 33 76 77 58 47 33 2f    | AAtOBcZKb3vwXG3/
34 72 65 71 72 6a 39 47 42 61 49 42 0d 0a 30 2b    | 4reqrj9GBaIB..0+
4f 34 66 37 43 67 4f 78 42 38 47 6d 44 32 69 42    | O4f7CgOxB8GmD2iB
31 70 79 56 55 7a 76 52 72 44 37 65 30 69 6a 31    | 1pyVUzvRrD7e0ij1
35 63 76 6e 58 46 63 6f 75 31 34 50 45 53 6c 6f    | 5cvnXFcou14PESlo
30 2b 34 75 6b 4e 6d 42 4a 44 57 74 67 6c 0d 0a    | 0+4ukNmBJDWtgl..
45 47 46 65 6f 4e 30 78 37 2f 63 52 59 53 70 71    | EGFeoN0x7/cRYSpq
52 44 48 71 56 59 39 75 34 69 63 44 49 7a 31 4c    | RDHqVY9u4icDIz1L
75 78 5a 72 69 35 76 69 63 41 59 4b 62 44 69 4b    | uxZri5vicAYKbDiK
30 4b 77 69 64 39 59 71 4b 43 63 76 2f 73 4c 37    | 0Kwid9YqKCcv/sL7
0d 0a 32 77 2b 53 7a 46 46 75 72 73 54 6c 70 2f    | ..2w+SzFFursTlp/
36 74 4c 4d 41 72 6c 30 37 49 4f 65 52 63 51 38    | 6tLMArl07IOeRcQ8
4c 2b 6a 71 69 6e 44 30 6f 6f 62 53 5a 78 49 30    | L+jqinD0oobSZxI0
6b 42 64 54 47 6a 6c 38 68 44 42 77 6d 6a 74 63    | kBdTGjl8hDBwmjtc
33 63 0d 0a 6b 39 68 53 58 78 42 65 65 4d 74 74    | 3c..k9hSXxBeeMtt
53 72 33 48 6f 4c 42 63 6c 76 4d 75 78 64 77 72    | Sr3HoLBclvMuxdwr
41 6f 52 49 48 61 64 4f 4b 52 35 54 70 52 34 3d    | AoRIHadOKR5TpR4=
0d 0a 2d 2d 2d 2d 2d 45 4e 44 20 58 35 30 39 20    | ..-----END X509
43 52 4c 2d 2d 2d 2d 2d 0d 0a                      | CRL-----..
CRYPTO_PKI: transaction HTTPGetCRL completedCrypto CA thread sleeps!
CRYPTO_PKI: Failed to retrieve CRL for trustpoint: SSL-VPN.
Retrying with next CRL DP...

Hello everyone!
I've got the issue solved. The issue ware in CA CDP. I published the new http CDP, and it's working fine.
Windows CA
- At Server Manager -> Right click on Certificate Athotity object name -> click properties then extentions
- Create an extention to genearate the following URL
http://winca.pmmagalhaes.com.br/CertEnroll/WINCA.crl
- Then apply -> ok
- Under Windows PKI right click Certificate Athotity object name then Refresh
ASA
Under retrieval policy set for static a then put the url above.
It's done

Similar Messages

Apache 2.0.59 - cannot read certificate revocation list

Hello,
i've installed a thawte SSL certificate on a Netware 6.5 SP7 server with apache 2.0.59. If i want to validate the certificate with C1, i get the following error "cannot read certificate revocation list" ! I've found in a forum task, that this is not a great problem, but when i remark the command "SecureListen 443 "new-NDS-name" in http.conf from apache, then the webserver cannot start. Error in apache log is "[Wed Jan 05 15:57:42 2011] [crit] (10043)Unknown error: make_secure_socket: failed to get a socket for port 443 Configuration Failed". I've found in novell support forum the following task - Error: Invalid cannot read certificate revocation list. I contact thawte and they told me the following - All of our Thawte certificates are issued a CRL to check. We do not have any process or way to issue a certificate without the use of the CRL. Unfortunately no, as almost all CA's will use a CRL to ensure that the certificate's validity and status is always up to date.
What can i do ? Does anyone has an idea ? It was great to get it running......
Regards,
Norbert

NSuttner,
> with apache 2.0.59. If i want to validate the certificate with C1, i get
> the following error "cannot read certificate revocation list" ! I've
>
FWIW, I have always regarded that as cosmetic (TID 10094995). Ie I sometimes get errors in C1, even if the certs are fine.
Your message indicates that you did not get the complete certificate list. Ie you need to have your cert, the trusted root and all intermediaries. Sometimes you have to import them all into Ie, then export the complete list
http://www.novell.com/support/php/se...00%20195481184
THE TID to read is:
http://www.novell.com/support/php/se...00%20195481155
and:
http://www.novell.com/support/php/se...00%20195481134
Also see:
http://www.novell.com/support/php/se...00%20195481082
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Cascading Select Lists - Not Working for me

I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
     select state_code || ' - ' || state_desc d, state_code r
     from tbk_state
     where country_code = :P6_COUNTRY_CODE
     order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?

Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti

[svn:fx-trunk] 5445: Fix for - @ copy tag for two methods with different arg lists not working.

Revision: 5445
Author: [email protected]
Date: 2009-03-19 17:47:57 -0700 (Thu, 19 Mar 2009)
Log Message:
Fix for - @copy tag for two methods with different arg lists not working.
Some changes for refactoring.
QE Notes: None.
Doc Notes: None.
Bugs: SDK-19975
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19975
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Revision: 5445
Author: [email protected]
Date: 2009-03-19 17:47:57 -0700 (Thu, 19 Mar 2009)
Log Message:
Fix for - @copy tag for two methods with different arg lists not working.
Some changes for refactoring.
QE Notes: None.
Doc Notes: None.
Bugs: SDK-19975
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19975
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

ACL not working in ASA 8.4

An ACL has been applied on the inside interface to of the ASA 8.4 but it is not working. The aim of this list to allow only a few host for outside access and deny rest of the hosts for outside access. The syntex of the access list is
access-list ACL-Inside extended permit ip host 192.168.100.101 any
access-list ACL-Inside extended permit ip host 192.168.100.108 any
access-list ACL-Inside extended permit ip host 192.168.100.109 any
access-list ACL-Inside extended permit ip host 192.168.100.243 any
access-list ACL-Inside extended permit ip host 192.168.100.241 any
access-group ACL-Inside in interface inside

Did you configure the NAT statement for the inside hosts to be mapped to a public IP? The below config will NAT 192.168.100.0 -100.254 to outside interface and the access-list you defined only allow those hosts to go out.
object network Inside_Net
subnet 192.168.100.0 255.255.255.0
nat (inside, outside) dynamic interface
If you alread did the above config please send us the packet capture as Mike requested.

Binding gateway service with List not working properly with expand

Hi all,
We have an orderlist with details, we use the splitapp for it, it's working nicely with a gatewayservice. We have now added with expand 2 orderpartners. I see the 2 partners, only is it completly the same data. I checked the oData structure and I see indeed that the 2 partners are the same. This is weird, because when I execute the service, via my browser, I see 2 different partners.
If I execute the service directly via the read function, I see in the oData that I also have 2 different partners. So my conclusion is that the direct read of the service is working and executing the service via the sap.m.List is not working with the expand.
Now my question is, does somebody know what's going wrong here, or is it a bug in the sap.m.List? Below you find code snippets how I call the service.
This call is working:
oModel.read("/OrderListSet", null, ["$orderby=BegTstmp asc&$filter=Userid eq 'user' and DateFrom eq datetime'2014-04-20T00:00:00' and DateTo eq datetime'2014-04-27T00:00:00'&$expand=OrderPartners"], null, function(oData, oResponse){
}, null );
The binding via the sap.m.list is:
var oList = new sap.m.List("orderList", {
mode: "{device>/listMode}",
            items: {
        path: "/OrderListSet",
           parameters: {expand: "OrderPartners"},
        template : new sap.m.StandardListItem({
        title: {
               parts: [
                       {path: "BegTstmp", type: new sap.ui.model.type.DateTime({pattern: "H:mm"})},
                       {path: "DataCol2"}
               formatter : function(strDate, strDescription) { return strDate + " - " + strDescription; }
        description: {
        parts: [
                      "DataCol3",
                      "DataCol4",
                      "DataCol5",
                      "DataCol6"
        type: sap.m.ListType.Navigation,
        icon: "{icon}",
        customData: [
        new sap.ui.core.CustomData({
        key: "orderId",
        value: "{Orderid}"
        new sap.ui.core.CustomData({
        key: "type",
        value: "{Type}"
        // Sort the list on date and group the list on day
               sorter: new sap.ui.model.Sorter("BegTstmp", false, oGrouper),
               // Filter the list, this directly refrenced to the gatewayservice
        filters: [
                 util.Filter.getUserId(),
                 util.Filter.getCurrentWeekFromFilter(),
                 util.Filter.getCurrentWeekToFilter(),

Fine. If you're trying to bind any attributes of OrderPartners, bind it as OrderPartners/attribute-name. Say if "BegTstmp" an attribute of OrderPartners bind it as OrderPartners/BegTstmp.
Regards
Sakthivel

Auto-Submit On Change in DropDown List not working properly!

Hi all,
I�ve got a problem with a drop down list an a table with some rows on my page. The property "Auto-Submit on Change" is set for the drop down because the valueChange-method has to do some work when the user selects another value from the drop down.
The problem is that after selecting another item from the drop down, the table fields don�t keep their values, which I had entered before I selected another item in the drop down. But: When I select an item again, suddenly exactly these values are set.
Here my code:
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:ui="http://www.sun.com/web/ui">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
<f:view>
<ui:page binding="#{Page1.page1}" id="page1">
<ui:html binding="#{Page1.html1}" id="html1">
<ui:head binding="#{Page1.head1}" id="head1">
<ui:link binding="#{Page1.link1}" id="link1" url="/resources/stylesheet.css"/>
</ui:head>
<ui:body binding="#{Page1.body1}" id="body1" style="-rave-layout: grid">
<ui:form binding="#{Page1.form1}" id="form1">
<ui:table binding="#{Page1.table1}" id="table1" style="height: 488px; left: 24px; top: 120px; position: absolute; width: 1376px"
title="Table" width="1376">
<ui:tableRowGroup binding="#{Page1.tableRowGroup1}" id="tableRowGroup1" rows="10" sourceData="#{SessionBean1.columnProvider}" sourceVar="currentRow">
<ui:tableColumn binding="#{Page1.tableColumn1}" headerText="field1" id="tableColumn1" sort="field1">
<ui:textField binding="#{Page1.textField1}" id="textField1" text="#{currentRow.value['field1']}"/>
</ui:tableColumn>
<ui:tableColumn binding="#{Page1.tableColumn2}" headerText="field2" id="tableColumn2" sort="field2">
<ui:textField binding="#{Page1.textField2}" id="textField2" text="#{currentRow.value['field2']}"/>
</ui:tableColumn>
<ui:tableColumn binding="#{Page1.tableColumn3}" headerText="field3" id="tableColumn3" sort="field3">
<ui:textField binding="#{Page1.textField3}" id="textField3" text="#{currentRow.value['field3']}"/>
</ui:tableColumn>
<ui:tableColumn binding="#{Page1.tableColumn4}" headerText="field4" id="tableColumn4" sort="field4">
<ui:textField binding="#{Page1.textField4}" id="textField4" text="#{currentRow.value['field4']}"/>
</ui:tableColumn>
<ui:tableColumn binding="#{Page1.tableColumn5}" headerText="field5" id="tableColumn5" sort="field5">
<ui:textField binding="#{Page1.textField5}" id="textField5" text="#{currentRow.value['field5']}"/>
</ui:tableColumn>
<ui:tableColumn binding="#{Page1.tableColumn6}" headerText="field6" id="tableColumn6" sort="field6">
<ui:textField binding="#{Page1.textField6}" id="textField6" text="#{currentRow.value['field6']}"/>
</ui:tableColumn>
</ui:tableRowGroup>
</ui:table>
<ui:dropDown binding="#{Page1.dropDown1}" id="dropDown1" items="#{Page1.dropDown1DefaultOptions.options}"
onChange="common_timeoutSubmitForm(this.form, 'dropDown1');"
style="position: absolute; left: 48px; top: 24px; width: 240px; height: 24px" valueChangeListener="#{Page1.dropDown1_processValueChange}"/>
</ui:form>
</ui:body>
</ui:html>
</ui:page>
</f:view>
</jsp:root>
and the code of the valueChange-Method:
public void dropDown1_processValueChange(ValueChangeEvent event) {
getSessionBean1().getColumnProvider().commitChanges();
List positions = getSessionBean1().getColumnProvider().getColumnList();
Is there some explanation for this behavior or it�s really a bug in the way how the drop down is submitting the form? I would understand it when commitChanges is not working here because of auto submit on change (==immediate?). but once it works und once it doesn�t work!

Hi There,
Not sure what you mean. Have you tried Netbeans 6 yet. Do you see same behaviour in it as well?
This might be of help to you
http://www.netbeans.org/kb/55/dropdowncomp.html
Thanks
K

Dynamic Distribution List not working!

H all,
I have been struggling with Dynamic DLs...
I have a domain with 3 sub-domains. Only some users on my top domain have mailboxes on exchange (we use another primary email system) and all users on the sub-domains are added to Exchange as Mail contacts and Mailusers.
So the idea is to create a DL for all users on each site. I want to be able to send email to all users on a particular office.
So, following the TechNet articles I do:
[PS] C:\Windows\system32>New-DynamicDistributionGroup "Test1" -RecipientFilter {(RecipientType -eq 'MailUser') -and (Office -eq 'Office2')}
All users have the Office field filled.
The DL appears on my ECP. Now to see what members the list has (should pull all members with "Office2" on AD) I do:
$members = Get-DynamicDistributionGroup -Identity "Test1"
[PS] C:\Windows\system32>Get-Recipient -RecipientPreviewFilter $members.RecipientFilter | select Displayname,PrimarySmtp
Address
When I press return, it just returns (nada, nothing, nicles):
[PS] C:\Windows\system32>
On other Distribution lists, it works...
For this particular location I converted the mailcontacts to mailusers because I was having problems on sending emails to this DL. Basically the email was purely not sent but it didn't return any error message.. just discarded. If I run a message tracking
on ECP all I can see is: "Delivery report information for this message is no longer available."

Hi,
This would help you... Add RecipientContainer with the full domain name where recipients are and check...
RecipientContainer
Optional
Microsoft.Exchange.Configuration.Tasks.OrganizationalUnitIdParameter
The RecipientContainer parameter filters the recipients used to build the dynamic distribution group based on their location in Active Directory. The value of theRecipientContainer parameter
can be the canonical name of an organizational unit (OU) or a domain. If you don't specify a value for the RecipientContainerparameter, the cmdlet will default to use the local container. This location is specified by using the OrganizationalUnit parameter.
From: http://technet.microsoft.com/en-us/library/bb125127(v=exchg.150).aspx
Blog |
Get Your Exchange Powershell Tip of the Day from here
Still doesn't work!
I have done:
[PS] C:\Windows\system32>New-DynamicDistributionGroup "Test3"-recipientcontainer "subdomain.domain.local" -RecipientFilter {((R
ecipientType -eq 'MailUser') -and (Office -eq Office2))}
Creates the DL, but no members...

Dependent Choice List Not working in ECapture as Expected

Hi Martin_A,
In ECapture i am trying to create a dependent Chocie list which will show City name based on Country name.
But in ECapture that configuration is not working since during the creation of Depedent list from Parent
Source,configuration is taking only one value of Parent source for eg. Country- US
Hence child choice list is showing cities related to only US.
Which should not be the case since in actual scenarios depended list means filter on the basis of selected parent value.
Please let me know if i configured it wrongly.
Please send me the steps if you did it perfectly last time
@Martin_A

Looking at the documentation 3.7 of Managing Oracle Webcenter Capture, that's how it is, you have to have a separate child list of cities for every country in the country list, only 196 parent items and 196 lists to configure then
In a choice list dependency, a parent field is linked to two or more child choice lists,
one of which is displayed after the user makes a selection in the parent field.
Important Points About Choice List Dependencies
■ You can create choice list dependencies between Capture user defined choice lists,
database choice lists, or between choice list types.
■ Create all choice lists you plan to link before creating a choice list dependency. At
a minimum, you need a parent choice list, and two or more child choice lists.
■ Each item in a child list can be related to multiple parent items. For example,
Supplies could be a child item to Household and Automotive subproducts.
■ You can create multi-level dependencies (for example, great grandparent,
grandparent, parent, and child choice lists).
■ Only one choice list dependency may be assigned to a client profile. Multiple
parent/child dependencies must be defined within a single choice list dependency.
Martin

Shift-Tab to decrease indent level in list not working.

I really can't say it any clearer: when I press Shift-Tab to decrease the indent level (for example in an outline-style list), it is not decreasing the indent level.
This is for Pages 5.1/Mavericks 10.9.1
This used to work in iWork '09 but I just tried it in Pages '09 and I get a error beep.
The only thing I can think of is that there is some accessibility or other command that is overriding this but I can't figure out what.
Any ideas?

PeterBreis0807 wrote:
It is working for me. I tried Numbered, Letter and Harvard lists.
The only place it doesn't work is in tables where it jumps cells.
What do you actually mean by "Outline style list"?
Peter
I'm using a Harvard list. It simply is not working.
Just called AppleCare and they had not seen this issue but I got bumped up to iWork support (or whatever they are calling it now). They are calling me back tomorrow.
Command-] works for indenting as well but Command-[ does not work for outdenting.
My guess is it is a conflict but I thought maybe someone had run into this before and there might be a quick fix.

Users Safe/Block list not working

Hi guys,
I'm using a Management ironport appliance as external quarantine for two Ironport email security devices (clustering), i have enabled Users Safe/Blocks and simply it is not working.
When the user add email address as white/block to his own list under his quarantine page, nothing change & Safe/Block list is not working.
Any ideas how to solve/troublshoot the issue?
Regards
Rami

Hello Rami,
did you enable the Safelist/Blocklist on the management apliance and the ESAs as well? If only on the management appliance, then also switch it on on the email appliances under the setting for the external spam quarantine.
Hope that helps,
Andreas

Contact List not working properly

Today, my iPad 2 contact list stopped working properly. It opens but does not remain open. It stays open for one or two seconds and then closes. No opportunity to add/delete contacts. Anyone seen this before? I've never had a problem. Any hints or tips are appreciated. Thanks.

You did restore your iPad from that backup that was taken just prior to upgrading to iOS 5, right?
All apps and settings are included inthe backup.

Muse site on BC - URL Redirects list not working

Hello. A Muse site has just gone live on BC host.
The URL redirects don't appear to be working.
Doing a Google search on 'parkerandassociates.co.nz Amy Williamson' gives a result leading to http://www.parkerandassociates.co.nz/people/amy-williamson/ From the screen grab below the Redirect is showing that this should be working, but in reality the page is not being found. I tried several times to edit the Action and also imported the Import Redirect Urls method and it imported successfully.
My import file was CSV and had one row for consisting of the following columns Old Url (= /people/amy-williamson/) New URL (/amy-williamson.html) Enabled (True). I wasn't quite sure what to put in the columns for Enabled, so I put 'True' as shown below. But still the redirection is not working.
Can anybody tell me where I could be going wrong?
Cheers
Grant

Hi Grant Senior,
Update the source of the redirect from /people/amy-williamson/ to /people/amy-williamson/index.html and the URL http://www.parkerandassociates.co.nz/people/amy-williamson/ should then redirect successfully. This is because BC sees the source as a directory and not an actual page.
I have done this for http://www.parkerandassociates.co.nz/people/amy-williamson/ on your behalf, and can confirm that it is now working.
Cheers.

Generated lists not working in HTML conversion

Using FM 8.0p277
I have been asked to convert a book to HTML for the first time. When I do this, FM crashes with an error log that I cannot locate in the Program Files folder, as indicated in the error message. I believe it is the generated files that have caused the error(s). Originally, my List of Figures seemed to be the issue, so I tried generating HTML files of just the TOC and the main document in the book. They produced files fine except the links that work in FM from the TOC to the locations in the main file seem broken. If I open the TOC HTML file and click on one of the links, it does open the main document, but always the beginning of the document. I assume that is because I didn't create the HTML from the book file, but from individual files, so I created a book of just the TOC and main document and tried to save as HTML. FM crashed again. Has anyone had a similar experience, both of FM crashes as a result of creating HTML files and of not being able to locate the error logs in the directory indicated?
Janice

Janice,
The standard answer to questions about HTML export is that the feature is not very robust and likely will not produce the result that you want. It might be useful for certain rudimentary applications but generally FrameMaker users use a third-party application such as Mif2Go, RoboHelp, or a Quadralay product for this purpose. You might get lucky and receive an answer to your specific question, but I think it would be unlikely.
Russ

Webdynpro for ABAP - interactive Adobe form - drop down lists not working

Hi all,
I'm trying to create an interactive form for a client using webdynpro for ABAP and I've viewed the demo "Create SAP Interactive Forms by Adobe with Web Dynpro for ABAP" by Thomas Jung, but when I implement it the form following similar steps the form is not interactive.
In the properties of the "InterativeForm", I've tried clicking the "enabled" flag both on and off. I've also tried setting the "displayType" property to both "ActiveX" and "Native". But none of this worked.
I though my problem might be with Adobe reader so I switched from 8.0 back to 7.0 but this didn't make any difference either.
The system we are using is NW04s WAS 700. Any hints would be greatly appreciated!
Thanks,
-tom

Thanks for the suggestion Dezso. I've downloaded a newer version of ACF as indicated by the OSS note and installed it. I'm still having the same issue.
My basic question is what options should I be using in the form and on the InteractiveForm component? It looks like because of the evolution of the product there are multiple options available. I recall reading somewhere that as of a certain SP level we should have ZCI (zero client install) available. The would be our preference. It will be a support nightmare if each user needed a manual download of ACF.exe installed.
Should I click the "enabled" flag on the InteractiveForm object? When I create the form should I use the "Native" drop down list or the one from the "Active X" tab? I would like to use the "List Box" control on the form as well but it is only available in the "Standard" tab. So does that mean I can't get the selections from a "List Box"?
Thanks,-tom

Certificate Revocation List not working on ASA 8.3(1)

Similar Messages

Maybe you are looking for