CF MX Access datasource UNC network link possible?
I've tried both mapping a drive on the server and using a UNC
link, but my Access Unicode datasource won't work with files on
another server. I have the domain "logon" account rights embedded
in the CF application service, so that should be set.
If I use a network drive I get this error:
Connection verification failed for data source: 00aaatest
com.inzoom.adojni.ComException: 'w:\data\404.mdb' is not a
valid path. Make sure that the path name is spelled correctly and
that you are connected to the server on which the file resides.
The root cause was that: com.inzoom.adojni.ComException:
'w:\data\404.mdb' is not a valid path. Make sure that the path name
is spelled correctly and that you are connected to the server on
which the file resides. in Microsoft JET Database Engine code=0
Type=1
If I use a UNC link I get this error:
Connection verification failed for data source: aaatest
com.inzoom.adojni.ComException:
'\\\prism2\premierWWW\data\404.mdb' is not a valid path. Make sure
that the path name is spelled correctly and that you are connected
to the server on which the file resides.
The root cause was that: com.inzoom.adojni.ComException:
'\\\prism2\premierWWW\data\404.mdb' is not a valid path. Make sure
that the path name is spelled correctly and that you are connected
to the server on which the file resides. in Microsoft JET Database
Engine code=0 Type=1
Should I be embedding a username/pw in the ColdFusion
username and ColdFusion password boxes under advanced settings? I
tried domain credentials, but this didn't work either.
thanks for any suggestions!
Chuck
Don't know about the Map drive, looks ok to me (except
missing prism2\premier\www, but perhaps that was included in the
map to w
. At any rate we shouldn't be using map drives,
right?
For the UNC, the answer is the design bug (feature?) of the
administrator adding an extra \ for you so you wind up with 3.
Doesn't make any sense to me, but that's the way it is. Only use
one up front slash for UNC's.
Similar Messages
-
I have a DMP 4310G and wonder whether there is any restrictions for UNC network share access. I have a FlashLight 3.1 AS2 SWF and it won't connect to the data file on the network share if it runs from the DMP. The SWF file is copied to the DMP usb_1 for testing. The SWF runs without problems on PCs on the same network. Any ideas?
Thanks
WAThis is a Windows Share by the way. Format is: \\Server_IP\myfolder\file.txt
-
Accessing my home network through the internet?
Is it possible to access my home network through the internet via my AirPort Express? I would like to have full access to my Mac Mini's hard drive from my MacBook while at work.
Yes. You will need to enable file sharing on your Mac Mini (via Sharing in System Preferences) and then you will need to port forward all your ports (since I don't know exactly what file sharing method you will be using) of your Mac Mini via the AirPort Utility.
-
Cannot access webserver across network
Hi all,
a little background then on to the problem
small group running 4 work stations and one server. Server used to run apache 2 under OS X 4.7 but we have upgraded to OS X Server tiger 10.4.8
Prior to upgrading the webserver, we could mount the webserver machine on our desktops (apple+K then browse or enter the server's LAN IP) to add files, make changes to static pages etc to the web root directory...nice and easy
But since upgrading to OS X Server, we cannot mount or even see the server machine on the network. We can mount our workstations from the server via apple+k but that is a bit pointless unless we each keep a drive mounted on the server and drop changes into the mounted drives then walk over to the server to move the files around on the actual server machine (which negates the benefits of having a network!
So my question is....can anyone tell me how can we mount our server machine on to individual workstations we can make changes to web pages and directories.
I know some may say FTP but I really dont want to go that way as access via the network (apple+k) was a much quicker and easier method.
thanks,
TristanHave you verified that the file sharing service on the server is actually running?
From your description it sounds like the server isn't running, and therefore you're not going to get to mount its volumes.
I haven't heard of problems with services getting turned off as part of an OS upgrade, but anything's possible.
From your description I'm guessing you're using AFP, so check Server Admin to ensure that AFP is running. You might also need to check Workgroup Manager to ensure that the correct set of directories are being shared. -
Hi,
1,Can we use network link in expdp from 11g (destination)to 10g ( traget) for data migration?
2,Can we do like copy the user password from 10g and apply to 11g?
The below one is goet from source(10g).
grant connect,resource to HKHR identified by 'EAA43BC83A9C1BD4';
grant connect,resource to CSHEi dentified by 'C8F09D04F6AD4B05';
If we execute the above one at 11g,can we get the same password in 11g as 10g?
Is it possible?Because we have nearly 500 users in the database.
Any other method.
Thanks & Regards,
VN
Edited by: user3266490 on Feb 21, 2012 8:27 PMYes this all should work just fine. If you want the schemas moved over, just make sure that you use a privileged account. If you are having each person move their own schemas and the the schemas are not prived, then the user account with passwords are not moved over.
If you are using full=y the the schema running the datapump job needs to be prived anyway, so no issue. If you are moving multiple schemas, then the same applies. The schema running a multi schema job needs to be prived, so no issue.
The passwords will be copied over when the schema is created.
Again, this should all work fine.
Dean -
Network Link Conditioner to control Wi-Fi
I just finished installing and testing Network Link Conditioner that comes with Mac OS X Lion and Xcode4.1. It works great locally on the Mac, i.e. when I use the Internet connection that Network Link Condition is limiting directly.
However, when I create a Wi-Fi network on the Mac and share with it the Mac's Internet connection, Network Link Conditioner blocks Internet access to the Wi-Fi network completely. When Network Link Conditioner is turned off, the phones that are connected to the Wi-Fi network are able to browse the Web without issues. But when I turn Network Link Conditioner back on, the phones lose Internet connectivity.
Does this mean NLC cannot be used to test actual iOS devices and is only useful when testing using the Simulator? Or is there a workaround for this?
Thank you.I think the problem is caused by packets entering the firewall multiple times, inappropriately. This normally might be corrected via some MAC layer 2 filtering rules in ipfw, but those features are not present within ipfw as it appears in Mac OS X.
Note that Mac OS X Lion uses natpmpd for NAT in Internet Sharing, while Mac OS X Snow Leopard uses natd. These NAT solutions operate with different technical consequences, some of which affect the firewall rules used by Network Link Conditioner.
In the interim, I've found an acceptable, if not ideal solution. Instead of allowing Network Link Conditioner to create ipfw rules that modify every packet on every interface, modify the rules to only trap inbound packets traversing from the bridged interface to the LAN interface, and vice versa for outbound packets. After all, if you're testing simulated network conditions on attached WiFi devices, you only need to degrade network conditions for those devices, and you don't need (or probably want) your Mac's internal Internet connection to be affected.
I've created a script that can be executed to automatically fix the appropriate ipfw rules in Mac OS X Lion. It needs to be executed as root every time you select a new profile in Network Link Conditioner. Or, run it once in polling mode ( '-p' ), and it will run in the background and detect and fix Network Link Conditioner firewall rules automatically. It needs to be run as root because ipfw can only inspect and modify rules from an account with root privileges.
The script is located here: https://gist.github.com/1870945
If you want to perform the same logic manually, simply look for rules in the following format using 'ipfw list':
00100 pipe 40269 ip from any to any in
00200 pipe 40270 ip from any to any out
Replace them with rules in the following format, assuming that en0 is your LAN connection and en1 is your bridged WiFi connection:
00100 pipe 40269 ip from any to any xmit en1 recv en0 in
00200 pipe 40270 ip from any to any recv en1 xmit en0 out
To perform the above modifications, issue the following commands:
ipfw delete 100 200
ipfw add 100 pipe 40269 ip from any to any xmit en1 recv en0 in
ipfw add 200 pipe 40270 ip from any to any recv en1 xmit en0 out
You might need to reset your host and/or client WiFi connections before the modified rules work properly, as the firewall maintains packet state that sometimes directs packets according to previous firewall rules.
Note that in order for ipfw to allow rules to be created that span interfaces, you might have to modify the 'scopedroute' property to be disabled. Unfortunately, Mac OS X Lion has made this property read-only, and you can no longer modify the property by performing the following command, which works in Snow Leopard:
sudo sysctl -w net.inet.ip.scopedroute=0
If you find yourself needing to fix this problem in order for Network Link Conditioner to work with bridged connections in Mac OS X Lion, read the following link for a solution on how to modify 'scopedroute':
http://pastebin.com/NzAARKVG
Also note that after having implemented all of the above, sometimes the connection seems to freeze for several seconds at a time, after which it resumes normally. You can disable/reenable WiFi on the client to correct the situation immediately, or just wait it out. It's an unfortunate side-effect of not having all the necessary tools to direct packets properly in Mac OS X Lion. -
Problem with PowerBook (but NOT MacBook) and two access points on network
I recently installed a wall-plugged ethernet adapter system (Netgear XE104 and XE103) and plugged a wireless access point (Netgear WPN802) into one of the adapters (in the part of our house where we lacked a wireless signal) in order to extend the range of our (DSL) wireless network. I configured this new access point--disabled DHCP, assigned an IP address to the access point that does not fall into the wireless router's IP adress range, put the wireless router and access point on different channels (6 and 11), and made sure the router and access point had the same SSID.
I have had no problems using the resulting setup with our new MacBook--everything goes as planned. BUT I am having a terrible time with my PowerBook G4. It has a really strong signal everywhere, but when I open my browser it says that I am not connected to the internet. The problem seems to be that my PowerBook refuses to change channels once it connects to one. I installed iStumbler to see if I could manually control which access point/channel the PowerBook uses, and, while I can track the signal strengths for both access points, I can't get my PowerBook to switch from one access point to the other.
I've tried just about everything I can think of. I suppose I could try giving a different SSID to the access point (and then try to switch with the airport menu in the toolbar), but I would like to avoid this if possible.
I would really appreciate any advice you have. Thank you!Can you connect if you temporarily turn off WEP or WPA?
This will determine if it is a WEP or WPA issue.
Does your PC support WPA, from both a hardware and a software perspective?
The problem you are having probably lies with the encryption key.
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
http://tech.ifelix.net/1011.html
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP1)
http://tech.ifelix.net/1010.html
Problems connecting an XP PC to an Airport Base Station
http://tech.ifelix.net/2002.html
iFelix -
ASA 5505 VPN no access to inside network
Trying to set up ipsec/l2tp vpn to provide full access to internal network for remote users with only Windows built-in vpn client.
The vpn client can connect successfully, but can't see anything on the inside network.
The ASA is not the gateway for hosts on the internal network
name x.y.z.129 isp-gateway
name 172.16.1.0 vpn-address-pool
name 10.11.10.0 inside-network
name x.y.z.128 outside-network
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list vpn extended permit ip inside-network 255.255.254.0 vpn-address-pool 255.255.255.0
access-list outside_access_in extended permit ip any any
global (outside) 1 interface
nat (outside) 1 vpn-address-pool 255.255.255.0
nat (inside) 0 access-list vpn
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 isp-gateway 1
ciscoasa# show route
Gateway of last resort is cic-gateway to network 0.0.0.0
C outside-network 255.255.255.128 is directly connected, outside
S 172.16.1.5 255.255.255.255 [1/0] via isp-gateway, outside
C inside-network 255.255.254.0 is directly connected, inside
S* 0.0.0.0 0.0.0.0 [1/0] via isp-gateway, outsideDo you configure split tunnel or no split tunnel policy?
Also when you are connected and try to access internal network, can you pls share the output of :
show cry isa sa
show cry ipsec sa -
I am site collection administrator and have configured the outgoing email in Central administration but "Access Request and invitations" link is missing, pl advice any additional configurations for this link to show up
I was though able to configure access requests by going to Site Settings->Users and permission and on the ribbon selected "Access Request Settings"
What is the difference in either of the approaches?
Thanks
AbhishekHi there,
I noticed this post, and didnt really find an appropriate solution to your issue. I noticed the same issue when dealing with Access Requests. First of all to make sure that the Request feature is enabled, you need to access
Site Settings -> Site Permissions -> Access Request Settings -> Make sure the
'Allow access requests' option is enabled.
The Allow access screen just allows you to enable the feature and also to specify a email address that notifications are sent to. Whereas the 'Access Requests and Invitations' section provides a screen to manage Access Requests and request history.
I noticed then that the Access Requests and Invitations link under 'User and Permissions' didnt actually appear until someone actually requests to join the site. It seems that this is needed to display the screen. Once actioned once, the option stays there.
Hope it helps -
How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.
The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network. -
The iosx and open VPN app on the iPad/phone aren't compatible w my school's VPN, but my Mac is via tunnelblick. I would really like to have VPN access from my tablet so I can access journals without undergoing a tedious process.
Has anyone encountered this and found a remedy? I'm imagining an app from the tablet that can access the Mac at home to turn on the VPN to the school and then have access.. But then I'm thinking id be reading through 2 screens then formatting/resolution could be a problem.
Another thought was setting up a VPN at home so that my iPad can connect to my computer at home via VPN which would then allow me easy access to journals. But I'm lacking experience in this, especially a security issue as I'm going from point A to point C to get back to point B.
I'm open to any suggestions.
ThanksYou should be able to use the OpenVPN Connect app running on your iPad to connect your iPad to the VPN directly. It is an official OpenVPN client for iOS devices.
In what way is it "not compatible"? Have you tried it? Tunnelblick is an OpenVPN client, so your school's VPN is using the OpenVPN protocol. That means any OpenVPN client should be able to access it. (It is possible, but unlikely, that your school uses encryption that is not available on the iPad, but that would be very unusual.)
Otherwise, a remote control app on your iPad would let you control your Mac at home. "Back to My Mac", for example, would allow you to control your Mac remotely. The tricky part of this is that usually a VPN is set up to send all Internet traffic via the VPN server, and I'm not sure how that would work with "Back to My Mac". -
Can no longer access disks on network, all of a sudden happend
I have been at this for day’ now and have no results! Can no longer access disks on network.
Connecting to my server (it has one FW HD connected that is in 3 artitions). If I do it over a new window and click on the computer in the network I do see all the disks that it offers for sharing. Clicking one (or any for that matter) I get:
This operation can not be completed because original item for “name of disk” cannot be found.
If I try to mount over cmd K I again see all disks but can not mount any. I get:
A volume failed to mount.
The volume “name of disk” could not be mounted.
Trying to connect to the server from other machine gives same result. However I can connect between the tow other machines without a problem.
I have another machine in my network and this one I can connect to as always. My suspicion is thus that it is the host I can not connect to where the problem is.
And yes I did repair permissions, and ran Applejack.
This has happened al of a sudden as all was well a few days ago. Any insights?Hi orangekay
not sure where you got the idea that I have
bizarre encrypted filesystem plugins and scripts you have manipulating them all the time
because I do not have any such running, just normal Applescripts that do tasks that could be done by hand. -
One other thing - I had a problem with the key pairing so I rebuilt the rsa 1024 and the unit started working. Unfortunately I reloaded without the config in place and now I cannot get it to work again. Any help will be greatly apprecaited although I did review a dozen other posts of people having similar problems and for some reason there is never any conclusion as to the solution and I am not sure why.
Some other info from the client end:
I just ran the stats on the client and packets are being encrypted BUT none are decrypted.
Also Tunnel received 0 and sent 115119
Encryption is 168-bit 3-DES
Authentication is HMAC-SHA1
also even though the allow LAN is selected in the Cisco VPN client it states the local LAN is disabled in the client stats
also Transparent tunneling is selcted but in the stats it states it is inactive
I am connecting with the Cisco VPN Client Ver 5.0.07.0440
This config works. It is on the internal net 192.168..40.x and all users obtain dhcp and surf the web. It has required ports opened.The problem is that you can connect remotely via the VPN and you receive an IP address from the remote-vpn pool but you cannot see any machines on the internal network. The pix is at 40.2 and you cannot ping the pix and the pix from the remote PC connecting via the VPN and youcannot ping the remote PC from the PIX console when the remote is connected and receives the first IP address in the VPN pool of 192.168.40.25
I need to see the internal network and map network drives. I have another friend that is running the same config and it works but his computer is on a linksys wireless and has an IP of 192.168.1.x and the IP he receives from the VPN pool is 192.168.1.25 so I do not know if the same network is allowing this config to work even if there is an error in the config. In my present case I obtain the ip of 192.168.40.25 from the VPN pool and my connecting pc on 192.168.1.x I really am not sure how the VPN virtual adapter works. I am assuming it routes all traffic from your connecting PC to and from the virtual adapater but I really do not know for sure.
Other people have had similar issues with accessing the internal network from the VPN. One solution was the split-tunnel, another was the natting and another had to do with the encrption where there and an issue with the encrypt and ecrypt which was stopping the communicaton via the VPN.
I still cannot seem to find the issue with this config and any help will be greatly appreciated.
This is the config
interface ethernet0 100full
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password somepassword
hostname hostname
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
object-group network internal_trusted_net
network-object 192.168.40.0 255.255.255.0
object-group icmp-type icmp_outside
icmp-object echo-reply
icmp-object unreachable
icmp-object time-exceeded
icmp-object source-quench
access-list OutToIn permit icmp any xxx.xxx.xxx.0 255.255.255.248 object-group icmp_outside
access-list no_nat_inside permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
access-list split_tunnel permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
access-list OutToIn permit ip any any
access-list outbound permit ip any any
(NOTE: I had many more entries in the access list but removed them. Even with the above two allowing everything it does not work)
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside xxx.xxx.xxx.xxx 255.255.255.248
ip address inside 192.168.40.2 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpn_client_pool 192.168.40.25-192.168.40.30
pdm history enable
arp timeout 14400
global (outside) 1 interface
I had this statement missing from the previous posted config but even with the nat (inside) 0 access-list no_nat_inside it still does not work.
nat (inside) 0 access-list no_nat_inside
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group acl_outside_in in interface outside
access-group outbound in interface inside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.40.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community $XXXXXX$
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set 3des_strong esp-3des esp-sha-hmac
crypto dynamic-map clientmap 50 set transform-set 3des_strong
crypto map vpn 50 ipsec-isakmp dynamic clientmap
crypto map vpn client configuration address initiate
crypto map vpn client configuration address respond
crypto map vpn client authentication LOCAL
crypto map vpn interface outside
isakmp enable outside
isakmp identity address
isakmp client configuration address-pool local vpn_client_pool outside
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup remote-vpn split-tunnel split_tunnel
vpngroup remote-vpn idle-time 10800
vpngroup remote-vpn password ANOTHER PASSWORD
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 192.168.40.0 255.255.255.0 inside
ssh timeout 30
console timeout 60
dhcpd address 192.168.40.100-192.168.40.131 inside
dhcpd dns xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
username AUSER password PASSWORD privilege 15
terminal width 80
****************** End of config
I have been searching docs and other people's postings trying to obtain the info to make this work. It appears pretty much boiler plate but I believe my problem is in the natting. I am using a range in the internal network for the VPN pool and I have tried switching this to other networks but this has not helped. Unfortunately I have been unable to get the PDM to work and I believe this is a PC config thing and I did not want to waste the time on it. I read a post where a person using the PDM interface with the same problem (not being able to access the internal network) was able to go to a section in the VPN wizard and set the Address Exeption Translation. They said they originally set the VPN subnet when they did not have to. Many of the other blogs I read also stated that if the natting is not proper for the VPN pool- that it will not work but I am confused by the examples. They show as I do the complete range for an access-list called no_nat_inside but I believe it should only have the VPN pool IP range and not the entire network since the others do require natting - not sure if my thought process is correct here. Any help will be greatly apprecaited. Also this morning I just tried a boiler plate example from CISCO and it also did not do what I need for it to do. And I also connect a PC to obtain an IP to see if I can see it - no good. The PC can ping the PIX and viceversa but no one can ping the remote PC that connects via the CISCO Remote VPN client even though it receive an address from the vpnpool. Also include LAN is checked off on the client. This was mentioned in anther post.
Thank you once again.Hi,
PIX501 is a very very old Cisco firewall that has not been sold for a long time to my understanding. It also doesnt support even close to new software levels.
If you wanted to replace the PIX501 the corresponding model nowadays would be ASA5505 which is the smallest Cisco ASA firewall with 8 switch port module. There is already a new ASA5500-X Series (while ASA5505 is of the original ASA 5500 Series) but they have not yet introduced a replacing model for this model nor have they stopped selling this unit. I have a couple of them at home. Though naturally they are more expensive than your usual consumer firewalls.
But if you wanted to replace your PIX firewall then I would probably suggest ASA5505. Naturally you could get some other models too but the cost naturally rises even more. I am not sure at what price these are sold as used.
I used some PIX501 firewalls at the start of my career but have not used them in ages since ASA5505 is pretty much the firewall model we use when we need a firewall/vpn device for a smaller network/branch site.
Here is a PDF of the original ASA5500 Series.
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80285492.pdf
Here is a PDF of the new ASA5500-X Series
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/at_a_glance_c45-701635.pdf
I am afraid that its very hard for me atleast to troubleshoot this especially since I have not seen any outputs yet. Also the very old CLI and lack of GUI (?) make it harder to see what the problem is.
Could you provide the requested outputs?
From the PIX after connection test
show crypto ipsec sa
Screen captures of the VPN Client routing and statistics sections.
- Jouni -
I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
Prior to updating to iOs 6.3.1 my system worked perfectly.
Can anybody help please.1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
Windows explorer keeps computing items after accessing a mapped network drive
Our organization has decided to upgrade to windows 7 but we are running into a problem with windows explorer green progress bar hanging after accessing a mapped network drive. When you try to go back to computer or access the control panel after going
3 or more folders deep into the mapped drive, windows explorer just keeps searching.
When you expand the arrow in the address bar it states that it is computing items and never stops.
The only way around this is to right click on libraries and select reset back to defaults and everything is back to normal.
We are deploying this image of windows 7 to over a 1000 computers and we cannot have this problem lingering, does anyone have a solution to resolve this issue. This does not happen in Windows XP.
We have tried to turn off windows search and remote differential compression and this does work but the problem is that you lose all search capabilities in windows. So windows search needs to be enabled. We also tried to adjust the MTU, change GP settings,
and nothing seems to work except to turn windows search off or reset libraries back to default.
We also did some research online and there are so many people experiencing the same problem, with no resolution expect they have to go back to Windows XP. That is not an option for us.
Please help us we would really greatly appreciate it.Hi,
The issue could be related to searching and indexing feature in Windows 7. I suggest rebuilding the indexing files.
Click Start -> Type
indexing options in the search box -> Advanced -> Index Settings tab-> Rebuild buttion.
For more information, you can refer to:
http://windows.microsoft.com/en-us/windows7/Change-advanced-indexing-options
If the issue persists, you can perform the following troubleshooting steps.
1. Go to update your network adapter drivers and BIOS from manufacture's site manually.
2. If any router is involved, please update the firmware.
3. Perform a System File Checker.
http://support.microsoft.com/kb/929833
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Maybe you are looking for
-
This week I downloaded the BIOS update from Mozilla and since then my header bar has not been the same. For instance, in order to get to this box, to ask my question, I entered Mozilla.com, then entered "Help" which resulted in a new tab, then "Ask a
-
I want to move the location of my iTunes library music files. At present they are all on my time machine . I want to move them all to my imac. Can I do that and keep all my playlists and play counts? Thanks in advance its 1000s of songs . Originally
-
Photoshop CS6 on Lion: Won't open - Java Needs To Be Installed
Mac OS X Lion doesn't ship with a Java VM. Adobe Photoshop CS6 requires this, but its installer neither checks for a Java VM nor alerts you to this fact. Symptom: You installed Photoshop CS6 beta on Mac OS X Lion, which was a feat in and of itself
-
Client in UTF8 and database in we8iso8859p1
Hi men, this is the situation: - the database is in we8iso8859P1 - i have some clients with NLS_LANG= French_France.we8iso8859p1 - i have some new clients which will use new tables with nvarchar2 type with NLS_LANG=American_America.UTF8 (client side)
-
The HTMLEditor kit inserts extra newline characters when there is a space in the line and the line is greater than 80 chars? Can anyone tell me how to get rid of these extra newlines or how to set an unlimited or hugh line length as would be seen in