CF8 Verity "The collection you specified does not exist or is not registered with the ColdFusion Search Service."

I'm running ColdFusion 8 Enterprise on linux. I'm able to
create collections and index them through cfadmin as well as in cfm
application pages, but when trying to search I get the error
"The collection you specified does not exist or is not
registered with the ColdFusion Search Service."
I'm using the collection name in cfsearch and not the full
path.

Would I have been better off posting this in the General
Discussion section? Could the moderators move it if so,
please?

Similar Messages

  • The collection you specified does not exists or is not registered with the ColdFusion Search Service.

    While upgrading to CF7 from CF5, I am creating the new collections from Cf Admin. After creating, I indexed it from cf admin and then trying to search for the documents in that collection, and i am getting the following error. This was working yesterday. I have cheched the logs etc and nothing seems helpful in discovering what the issue is.
    Document count is 11,745 and the size is 25,948 kb, which is not too much for a collection. I have tried to restart Cold Fusion Search Services and then ColdFusion Application services, but all in vain.
    Any help on this would be greatly appreciated.
    Detail
    The collection you specified does not exists or is not registered with the ColdFusion Search Service.
    Message
    The collection rc_collectiom does not exist.
    StackTrace
    coldfusion.tagext.search.CollectionDoesNotExistException: The collection rc_collectiom does not exist. at coldfusion.tagext.search.SearchTag.verifyLocale(SearchTag.java:819) at coldfusion.tagext.search.SearchTag.doSearch(SearchTag.java:200) at coldfusion.tagext.search.SearchTag.doStartTag(SearchTag.java:159) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfeFull2dText2dReDirect2ecfm511389924.runPage(C:\Inetpub\wwwroot\External\FullText\eFull- Text-ReDirect.cfm:43) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfApplication2ecfc179940445$funcONREQUEST.runFunction(C:\Inetpub\wwwroot\External\Applica tion.cfc:114) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:344) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:290) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:254) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:56) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:207) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:169) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:194) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:146) at coldfusion.runtime.AppEventInvoker.invoke(AppEventInvoker.java:72) at coldfusion.runtime.AppEventInvoker.onRequest(AppEventInvoker.java:178) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:215) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115) at coldfusion.CfmServlet.service(CfmServlet.java:107) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    So at last I figured this out myself and found a temporary resolution for this kind of problem. Majority of the times try creating the Collection through Cfcollection tag and then index it using cfindex tag, rather than performing these operations from the Cold Fusion 7 administrator.
    The only reason I can think of which might have caused the issue is – I have thousands of documents in the collection which I indexed. So while indexing the page gets expired. So I tried again to index it. This time the collection got indexed fairly quickly and I got the response that the collection has been indexed successfully. So for the first time when I tried to index the collection, there might be some piece of code, which did not register the collection properly and hence giving this error.
    When I did the same function using the code, with exactly same set of documents, it did not throw any error, even when I executed it for the first time. So the collection indexed properly.
    I am not claiming that technically this theory is correct, but this seems to be the problem.
    If someone knows technically what has happened at the back, please share it. For the time being, this is the fix – if you experience any problem in creating/indexing collections through cfadmin in CF7, do it thorough code.

  • $TOSIMG$....The destination you specified does not exist

    Any ideas how to get around this problem trying to restore a Satellite Netbook from a USB stick.  No joy so far whatsoever.  Also, intermittently, the hard drive disappears from the BIOS list!
    Any help, greatly appreciated.

    Would I have been better off posting this in the General
    Discussion section? Could the moderators move it if so,
    please?

  • I got a replacement Ipad2 recently that tells me restore is needed. For over ten days i have tried but it keeps telling me to contact customer care. What can i do to save myself the long distance call as i am in Nigeria but registered with the UK iTunes?

    My replacement Ipad2 says Iphone cannot receive or make calls. Restore from itunes. Have tried 10 times with no success.

    Make an appointment at the genius bar.
    If you went without an appointment, then it would make sense that you could be turned away.

  • Error submitting form for Distribution: "The filename you specified is not valid because it does not

    Error submitting form for Distribution:
    "The filename you specified is not valid because it does not include a .pdf extension, contains one or more invalid characters or teh path preceding it refers to a protected system location."
    Tried removing dashes from filename, shortenign filename, moving to root directory. No changes. File ends with a .pdf extension.
    This is my first attempt to distribute via acrobat.com

    I found that I got that same message using Acrobat Professional to send out a document for shared review.  I had an exclamation mark in the title of the PDF. When I took out the exclamation mark, it worked.
    So maybe try taking out anything "unusual" (parentheses, dashes, exclamation marks, etc.) in the file name and see if that helps.
    Good luck,
       Philip.

  • The access edge server you specified does not exist

    Hi,
    I am trying to enable federation with Skype. I have Skype4B (Lync) 2013. unfortunately when I go to prvisioning site at https://pic.lync.com and try to enter my access edge server, it says: "The
    Access Edge service FQDN you specified does not exist."
    Does anyone have any idea why? searched online but apparently there are not answers.
    Thanks,

    Hi Atif7865,
    The SIP domain and the Access Edge server must be active, functioning, and reachable on the network.
    Please double check the DNS records and network , make sure they are functioning properly.
    If the error message persists, please contact Microsoft Customer Support Services to get help. For a complete list of Microsoft Customer Support Services telephone numbers and information,
    visit the following Microsoft website:
    https://www.microsoft.com/licensing/servicecenter/Help/Contact.aspx
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • The specified domain either does not exist or could not be contacted when logging in through RDP. Server 2012/SBS 2007

    I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
    I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at? 
    Jerry T

    Hi Jerry,
    Thank you for posting in Windows Server Forum.
    After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
    this thread)
    If this is the case, I would recommend proceeding like that:
    1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
    2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
    3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
    4. Make each DC / DNS server point to its private IP address as secondary DNS server
    5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
    6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
    Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
    On the client computer, run ipconfig /flushdns and check again.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found  This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting?  T

    I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
    Have published iweb site for five years with no problems and just opened a new site and get -
    404: Page not found 
    This error is generated when there was no web page with the name you specified at the web site.-
    Troubleshooting suggestions:
    Ensure the page you are linking to exists in the correct folder.
    Check your file name for case sensitivity . Index.htm is not the same as index.htm!
    Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
    is the problem with
    iweb or with hosting?
    One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
    to local folder. NWS has checked sttting a few times-
    Any help would be extremely appreciated as trying to fix this for about five weeks
    Thanks VG
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
    You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
    If that's not the page you are having trouble with, what is that page's URL?

  • "the specified domain either does not exist or could not be contacted"

    Dear Experts,
    I made an installation of BPC 7.0 MS SP04 in a multiserver environment. Installation process terminated correctly. My installation user  is a domain user, and he's also local Administrator on my  Web/Application Server.
    I simply want to add a domain user to my ApShell: so I log on to ApShell with my installation user, then I click to "add a new user".
    When I try to click on "Available domain [domain name]" to see domain resources,  popup appears with the following message: "the specified domain either does not exists or could not be contacted".
    I cannot browse in to the domain!
    Additional information:       
    1.The domain has been added from BPC server manager ->define system user group->domain                                                    
    2.The BPC server are in the same domain to which this domain user belongs .
    3. I can browse the domain resources with installation user from Appl/Web server using start->control panel-> Administrative tools-> Component Services->Active directory.  
    4. It's possible also add another domain user on the security of any folder.
    5. I restarted COM+ application "OSoftUserManage"
    6. We have another multi server installation in the same domain, the installation user is the same, there is no problem about AD browsing.
    Any help would be appreciated.
    Regards,
    Dario
    Edited by: DARIO CUPPARI on Nov 3, 2009 3:23 PM

    I opened a case with Microsoft and this problem has been fixed!
    The issue was that I had both a Preferred DNS server (my local DNS server) and an Alternate DNS server (8.8.8.8, which I added for "good measure" in my ignorance) listed on the server.  Removing the Alternate DNS server fixed the problem.
    (Control panel/Network and Sharing Center/Change Adapter settings
    Right click on your connection, choose properties.
    Click on TCP/IPv4 (unless you are using IPv6...) and choose properties
    Make sure there is only a Preferred DNS server listed.)
    Why redundancy is not a good idea is a mystery to me, but in this case it isn't.
    Peggy Thrasher

  • The affinity mask specified does not match the CPU mask on this system.

    We are having a problem with one of our SQL servers, and in comparing it to the backup server which is working fine, I noticed some differences. I attempted to correct the differences, but no luck.
    The dell server has 4 dual-core processors and at one point hyper-threading was enabled. One of our DBAs recommended that it be turned off. We didn't have any major problems until recently and it seems that getting this setting right is the lynchpin. Any suggestions?
    John
    EXEC sys.sp_configure N'show advanced options', N'1' RECONFIGURE WITH OVERRIDE
    GO
    EXEC sys.sp_configure N'affinity mask', N'0'
    GO
    EXEC sys.sp_configure N'affinity I/O mask', N'0'
    GO
    RECONFIGURE WITH OVERRIDE
    GO
    EXEC sys.sp_configure N'show advanced options', N'0' RECONFIGURE WITH OVERRIDE
    GO
    Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
    Msg 5832, Level 16, State 1, Line 1
    The affinity mask specified does not match the CPU mask on this system.
    Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
    The configuration option 'affinity mask' does not exist, or it may be an advanced option.
    Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
    The configuration option 'affinity I/O mask' does not exist, or it may be an advanced option.
    Msg 5832, Level 16, State 1, Line 1
    The affinity mask specified does not match the CPU mask on this system.
    Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
    Msg 5832, Level 16, State 1, Line 1
    The affinity mask specified does not match the CPU mask on this system.

    I had P2V'd a SQL 2008 server and was having this issue.  I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
    Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM.  After searching
    for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from.  Finally it hit me, maybe it's stored in the master or msdb datatbases.  
    SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine.  All services started
    OK on the virtual machine now and affinity was set the way I needed it.

  • Error 'The location you entered does not exist or is flagged as inactive.'

    Hi
    In iRecruitment, when Employee Candidate applies for any job, we are getting the error 'The location you entered does not exist or is flagged as inactive.' And it stops employee from applying to any jobs. We are in 11.5.10.2 version.
    Appreciate any pointers on the same.
    Thanks
    Alagappan
    Edited by: user5733015 on Dec 19, 2009 8:35 PM

    Hi Hussein
    Thanks for the update.
    I have gone through all those notes. But, the issue we face here seems to be a peculiar one. First of all, it happens while applying for job (iRecruitment Self Service) and not while creating a contingent worker or creating an employee in the form, as given in the notes.
    Moreover, We haven't had this error either in development nor in test instance. It happened only when we migrated the setups to Production. Moreover, the test and development are nothing but the clone of production at various time intervals. We have tested this on the very latest clone of production (that happened on 15th november) and verified that it doesn't popup there.
    Can you give me some insights 'What could be the actual problem'?
    Considering the solution given in the notes, it talks about 'Setting the default work location for the business group'? Where to set this up?
    Appreciate all your help.
    Thanks
    Alagappan

  • Sorry, the page you requested does not exist.

    I've been struggling for a couple of weeks attempting to get my domains hosted with my mobile.me account with little success. After trying about everything and I believe they have me blocked now on Chat support, it is now unavailable due to overwhelming interest in mobile.me. I've created my sites on iWeb and published them and when I go to view them I get "Sorry, the page you requested does not exist." Anyone have any ideas?

    Hi Mark,
    The site may have been unavailable for a short time. The links function correctly for me at the moment. Please confirm if you are still having this issue.
    Regards,
    Les

  • "The company code does not exist or has not been fully maintained" in mm01

    Hi all,
    I am creating a material, it needs me to provide company code. when I gave out my company code, it reports:
    "The company code ZXXX does not exist or has not been fully maintained".
    what should the problem be?
    thanks and regards,
    Smaosn Zhu

    Hi Raja,
    Checked all you specified.
    I have done these assignments:
    1. assign comp - > comp code
    2. assign plant- > comp code
    3. assign purch. org - > comp code
    4. assign purch. org - > plant
    but the problem is still there.
    let me try to re-do it.
    thanks,
    samson

  • The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

    The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
    We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
    and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
    The SQL Server Analysis Server is 2012 SP1

    Hi RB_ORIPW,
    The table with name of 'XXX' doesn't exist.
    An error occurred when loading the model(Micorsoft.AnalysisServices)
    If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
    The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
    You can access Windows Event logs via "Administrative Tools" --> "Event Viewer".  SSAS error messages will appear in the application log.
    The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
    Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
    Data collection for troubleshooting Analysis Services issues
    Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
    http://support.microsoft.com/kb/2897263/en-us
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • Namespace Errors System Error 1355 - Specified domain does not exist or could not be contacted

    Ok, lets start with my environment:
    dc1 - windows server 2003 r2
    dc2 - windows server 2012 r2
    fs1- windows server 2003 r2
    fs2 - windows server 2012 r2
    Namespace - \\<fqdn>\data  (the fqdn would be like contoso.microsoft.com)
    I am in the process of migrating everything from server1 to server2 (dc and fs listed above).  I am done with mostly everything except DFS.  I have migrated the data, setup permissions, shares, etc. and replicated the data between fs1 and fs2.
     I have verified that all data is currently replicated and up to date, so no backlogs.  I am trying to add dc2 and fs2 as namespace servers.  This is so that I can point all of the referrals to FS2 that way when I remove FS1 no one gets an error
    about not being able to find the files.  The problem is that from all 4 servers, I receive an error message when loading the namespace via DFS Management tool.  I then thought because of the drastic differences between the versions, the next best
    thing would be to export the namespace and then import it into the new server, but even attempting the export command (dfsutil) gives me the same error.  My suspect is that the original namespace server was removed sometime ago without the previous IT
    person properly migrating everything (but I am at a loss cuz here I am).  I then thought if I go through ADSIedit, I can change the namespace server to the new one for all of my shares, and then possibly be able to load the namespace within the MMC tool
    (again just a guess); however, I cannot find anything listed for namespace or remoteservers under the properties of the share.
    Note:  the namespace does work when I navigate to it from a PC.  \\contoso.microsoft.com\data does bring up folders and files.  (changed the name for obvious reasons)
    At this point, I just want to have my new namespace server, so that I can change the referrals, and decommission my other servers.  (And yes there are many other steps I need to perform for the decommissioning, but that's not the point of this).  I
    have read numerous articles on this and haven't found a way to accomplish what I want.  Even though I walked through the steps listed for those issues and unfortunately they either did not apply or did not work.  I prefer to not use ADSIedit if at
    all possible, simply because it's not the "clean" way of doing things, but if I have no other option then I have no other option.
    Edit 1:  In event viewer on dc1, under File Replication Service on the left hand side, I see the following error appear numerous times (not every day, but still a lot).  I have not performed any of the steps listed simply because
    I do not know if this pertains to my problem and I don't want to start troubleshooting a server I plan on decommissioning unless I need to (say for the above issue):
    Event ID:  13568
    Source: NtFrs
    Description:
    The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR. 
     Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" 
     Replica root path is   : "c:\windows\sysvol\domain" 
     Replica root volume is : "\\.\C:" 
     A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found.  This can occur because of one of the following reasons. 
     [1] Volume "\\.\C:" has been formatted. 
     [2] The NTFS USN journal on volume "\\.\C:" has been deleted. 
     [3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal. 
     [4] File Replication Service was not running on this computer for a long time. 
     [5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:". 
     Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state. 
     [1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication
    Service. 
     [2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set. 
    WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again. 
    To change this registry parameter, run regedit. 
    Click on Start, Run and type regedit. 
    Expand HKEY_LOCAL_MACHINE. 
    Click down the key path: 
       "System\CurrentControlSet\Services\NtFrs\Parameters" 
    Double click on the value name 
       "Enable Journal Wrap Automatic Restore" 
    and update the value. 
    If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Edit 2: I have verified that firewalls are off and I can communicate to all 4 servers from each other.
    Edit 3:  Attempted to try and fix error reported in 'Edit 1'; however the registry key mentioned does not exist (looked at all 4 servers to verify).

    I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating.  I
    could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
    The listed registry key does not exist
    Expand HKEY_LOCAL_MACHINE. 
    Click down the key path: 
       "System\CurrentControlSet\Services\NtFrs\Parameters" 
    Double click on the value name 
       "Enable Journal Wrap Automatic Restore" 
     

Maybe you are looking for