Cfdocument repeat header issue

Using cfdocument, we are trying to have a dynamic title bar
repeat on each page with rows of data underneath.
It is currently a row in a table which displays once at the
very top of the first document. When put in the header however, the
column shrinks to the size of the title, not the size of the
largest record in the info below because the two tables are now
separate.
We tried padding the title with based on the
len(of the largest record). This sort of worked but seems we can't
find a consistent font that will pad it evenly. Does anyone know of
either a font that would work despite case etc..or have another
(maybe more clever) idea of how to get the title to size for the
largest record in each column?
As always, thank you for your help!
Va.

I just ran into this issue and I think this is the edge of
this capability and time to use the ReportBuilder again. I've used
the ReportBuilder successfully many times, I've just learned to use
cfdocument when I can. I thought about using the "len(of the
largest record). " approach, but it seems like such a kluge. Anyone
find a good solution? Would be nice if there was an elegant way to
do this with cfdocument.

Similar Messages

Repeating header issue

Hi gurus,
I am new with BIP and had encountered the ff problems:
I am printing a table by using rtf reports,I have 3 rows in my table. 1st row i used ur option to repeat the 1st row as header,my requirement is to repeat the 3rd row as well in the other pages too. My table has more than 3 rows.
can you guide me how to acheive this.
Also, can you provide details on the proper use of the ff XSL-FO Elements supported by BIP:
keeps-and-breaks-properties-atomic break-after (auto, column, page)
break-before (auto,column)
keep-with-next
keep-with-next.within-page
keeps-and-breaks-properties-block keeps-and-breaks-properties-inline
keeps-and-breaks-properties-inline keeps-and-breaks-properties-atomic
keep-together
keep-together.within-line
keep-together.within-column
keep-together.within-page
thanks a lot.

hi Kavipriya,
thanks for the quick reply.
Only the first and third rows must be repeated.
the third row is the data row which pulls data from the xml.
Is that possible?
Thanks a lot :)

Repeating Header question

XMLP 5.5 Standalone
Learning the ropes with XMLP, the provided samples are a very good, illustrative starting point. One thing I wonder:
In the rtf_templates/advanced/RepeatHeader example, I found you can use
<?for-each@section:G_CUSTOMER?>
to do the magic, where G_CUSTOMER points to an existing group in the loaded XML data.
I tried to apply a repeating header to another example, rtf_templates/sales_reports/retail_sales.rtf
Here the xml-data is not grouped (simply starts with ROW and then the details). I however (soft)-grouped the data within the report by Year, resulting in:
<?for-each-group:ROW;./YEAR?><?sort:YEAR;'descending';data-type='number'?>
But I couldn't make out the syntax to use this group in the for-each@section command. Is this possible at all, or can you only address 'real groups' which have to be present in the XML data file?
Thanks for your help
Tino

Hi Tino
Nice question, this is possible with a current caveat. You can not use a sort option on the group in your template.
So you would have :
<?for-each-group@section:ROW;./YEAR?>
we found the sorting issue while testing your question. IT will be addressed in the next release. But you can live without the sorting in the template then you can do what you asked.
Regards, Tim

Repeating Header Rows - Not repeating beyond page 2

Hello,
I'm at my wit's end and I have yet to see a response to questions related to repeating headers (though I've seen it in a few forums).
I have a flowed form with an initial header table and then 4 subforms, each made up of tables with a header group of two rows and then a user-modified number of data rows. Each of the subforms has it's own 2 line header, which includes a static "topic" row (with "add/delete row" button) and then a second header row with the column titles (9 columns across). As I said, these two header rows are grouped together.
Each of the 4 subforms can (and does) flow on to multiple pages once filled in by the users. At first, my issue was getting the two rows (grouped) that make up my header to repeat on subsequent pages for each subform. No go - apparently grouped header rows can't make up an overflow leader (I can only choose one of the two), and when I check the box to make the GROUP appear on subsequent pages under pagination, it will only appear on page 1 and 2 for that particular subform...so I've given up on that. Now I just want the second header row (with the column titles) to appear on every page that each subform overflows on to, but I can still only get it to appear TWICE. Anytime a subform moves onto a third page, requiring a third instance of the header, it doesn't work.
I came across one solution involving the "repeat header for each row", but that came with a host of new bugs, including a bug where every time I open, edit data in a particular subform and save the file, a NEW header group row is added to that subform (after 12 opens, there is literally 12 header rows at the top of each of my 4 subforms if I edit data in all 4)...though it solves the other issue and the header rows DO appear properly on subsequent pages beyond page 2!!!!
Any solutions? I've run into this on three separate occasions over the past year when building forms and every time, I've hit this wall, given up the search for a solution and sacrificed aesthetics and functionality in my forms that I shouldn't really have to.
Ck.

Here is a sample I did for you..
https://acrobat.com/#d=BSeyeLhbaeyqXfwX*wrwzA
The difference with this file, is I created a table and then in the top row I merged all cells. Then created a table with two rows inside this merged cell.
In the Header row properties I checked, repeat header in Subsequent pages.
Let me know if you have any issues..
Thanks
Srini

Repeat header's column in a table with row height that greater then 200px

== Issue
==
I have another kind of problem with Firefox
== Description
==
I develop a website and encounter some problem about web page printing. I try to repeat header's column in a table with row's height that greater than or equal to 198px, but it doesn't work. Another size that lower than 198px works fine. If somebody has seen this issue before and know a solution, please help me. Thanks in advance.
== This happened
==
Every time Firefox opened
== Firefox version
==
3.6.6
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6
== Plugins installed
==
*-6.0.12.1739
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*PDF-XChange Viewer Netscape Gecko Plugin
*Default Plug-in
*Shockwave Flash 8.0 r22
*Adobe Shockwave for Director Netscape plug-in, version 11.0
*3.0.40624.0
*Office Live Update v1.3
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox.
[http://forums.mozillazine.org/viewforum.php?f=25]
You'll need to register and login to be able to post in that forum.

Report Total lable when "repeat heading on break"

Hi,
I have a report where I'm breaking on the first column, and returning the totals.
When I have "Default Break Formatting", since I am returning totals based on the first column, it says report total under the first column.
However, If I have "Repeat heading on break", the first column won't show as one of the columns in the report, but it will show above the box. Because that first column is not gone, I realized that the lable "report total" is gone too, since there is no space to put it. It is still returning the totals correctly, but there is no lable that says "total" or anything like that.
I wouldn't mind having that label on the second column, or someplace else. Can I do this?
Thanks!

Lila,
If you want to take advantage of the features that HTML DB reports offer, such as column heading sorting, then writing your own PL/SQL region would not be an option. I was only confirming your observation that repeating headings only works for the first break column and suggesting an alternative approach. So you'll have to decide which is more important in your case, getting the formatting you're looking for or using those advanced reports features.
As for the previous posting regarding new and older versions of HTML DB, HTML DB 1.5 was our first production release, shipped with the Oracle 10G database, and this version as well as HTML DB 1.5.1 offers the same kind of report heading sorting and the same type of column breaks.
Regards,
Marc

Help on displaying Repeat Header Rows

Hi All,
I have a table where i need to repeat each header per page But i there's one value that i need to display on the first page only.:
given the following repeat each header per page:
page 1 header
product1
product2
product3
page 2 header
product2
product3
page 3 header
product2
product3
i set the table to repeat header per row. But it keeps appearing the product 1 for 2nd page and 3rd page.
thanks in advance,
Paolyn

Hi Kavipriya thanks for your reply:
My xml structure are the following:
<List of Productitems>
<List of Productlines>
<ProductId>
<ProductGroup>
<ProductPlan>
<modelid>
<modelname>
<modeltype>
<List of productlines>
<List of ProductItems>
I regroup my xml by ProductId, ProductGroup,productPlan and i need to display model id ='0001' per page of the report as header information. Plus i need to display modelname='Sample1' on the first page only of the report as header which contains model id='0001' also.
Thanks in advance,
Paolyn

Repeating key issue

I just moved to the Mac a couple of months ago. I love it and haven't looked back. However, today, I used my Mac twice. First, this morning, I didn't do anything unusual. I cleared out my trash, browsed a bit on the Internet and answered e-mail. Then I modeled some artwork. I shutdown my machine, shutdown my cable modem & router and went to work. When I came back at lunch nothing was wrong and I hardly did anything (Internet still wasn't on).
However when I came home after work, I started the machine up and the hard drive icon kept popping up and it was difficult to use the menu because I had to hold down the mouse button instead of just click. It turns out that the space key is repeating spontaniously. I thought it might be the keyboard but it doesn't stop when I unplug the keyboard.
Has anyone had this before? How do I cure it? Thanks.

Hi Redspark,
Did you arrive at any solution to your repeating key issue? I've recently joined the discussions forum because I'm having a similar problem - without having typed anything, my backslash spontaneously inserts itself into any text box available and starts repeating itself across the page. In the Finder, I also get various folders spontaneously highlighting themselves, if I pull down a finder menu, it flashes which makes it almost impossible to select anything. As well I get sudden outbursts of the error chime.
Have done an Archive and Install, reset the PMU. I've also zapped the PRAM, checked my RAM slots, checked Permissions, etc.
Let me know if you've got any further insights.
Thanks.

IR Report - Repeating Header Isuue

IR Reports - Apex 3.2
Question: Is there way to keep the main Table Column Header the same as Repeat Heading. I spent a lot time coloring the Column Header cell <blue> and they do not pass down to the Repeating Headers.... I tried numerous ways. Thanks in-advance.
<style type="text/css">
.apexir_WORKSHEET_DATA th{background:#8A7E3F}
text-decoration:none;
cursor:pointer;
#apexir_WORKSHEET .apexir_REPEAT_HEADING {background:#8A7E3F }
#apexir_EAC_CMDB_PLT {color:"#00FF00";text-decoration:none;
cursor:pointer;}
</style>

Hi,
Sorry, I now see what you are trying to do - I updated my styles to use #apexir_ENAME {color:#0000FF;text-decoration:none;cursor:pointer;} and then set the groupings. Only the first "Ename" heading is styled using this. That is because this is the only one that is given an ID of "apexir_ENAME" - the other group headings are just plain DIVs without IDs.
The only way I've managed to get a style onto all of these is to add in a SPAN tag into the heading itself and style it that way. Whilst that does work, of course, it does mean that the SPAN definition is now part of the heading text so appears when you use "Select Columns" etc.
I can't think of an easy way around this as I assume that the IDs are important to the IR functionality and should be unique on the page.
Andy

Repeat heading in smartforms

Hi all,
How do I print heading in every page of smart form.
I have defined heading in the header of a table in main window.
I have selected both repeat header at page break , at start of table.
still the form is not printing header in the second page.
thanks in advance.

thanks jayathi.
BTW did you test this example with records exceeding single page.I actually coded the table in the same manner.But it does not work.
Anyhow, i solved the problem using a work around. I added a window to the next page with check box 'not on first page ' ticked.

Tables: how do I turn off repeating heading row?

Hi,
how do I turn off the repeating heading row feature in tables? I've looked through Table Designer and on-line Help but no joy. I know it's probably something very simple but I just can't find it.
Advice appreciated.
Cheers

Also, if you already have heading rows and you are just trying to get rid of them, I think your only option is to delete them. If a heading row contains content that should be in a body row, create a new body row and copy/paste the content into it before deletion of the heading row. I think you can also just copy the whole row, put the insertion point in the body area, then paste, and it magically becomes a body row. Note that you can restore heading rows with the Add Rows and Columns feature.
Russ

Can I avoid repeating heading information?

Can I avoid repeating heading information if repeated in a same page.
This occurs due to group on a field which causes it to display again heading information. The heading information should be displayed only once on each page.
How can I avoid this?
Thanx
Regards,
Vikas

Hi,
Create another repeating frame as parent frame of current repeating frame, and with same source. Then put all heading in this parent frame, set Maximum Record per Page = 1.

XML publisher report header issue

Hi,
I am facing a unique issue. The problem is : I have two groups: One is with Organization and other at employee level. For each organization I need to reset the page numbers. That I could achieve using @section. I need to put a page break for every employee. And the new employee name should go into the report header(should be repeating at all the pages of the report till the employee name for that org is not changing. Also the page number should not be reset at employee level). The report header is something like :
Organization:
Employee name:
Date:
For me the first employee name is repeating in all the pages. Please advice if anyone has worked on similar situation. I had posted this question in BI standard edition forum but have not received any reply. I guess I posted it in wrong forum..
Thanks,
Sid..

Hi,
Use the start:body syntax and move the header items into the main part of the document before the start:body tag. Put a page break before the end for each of your employee group.
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

How to remove repeated header and print "No records" in report

Hi,
I have a problem with my output report it is repeating the header when no records was found. And does anyone knows how i can put "No records found" (when no record is found) in the output without the Total amount and Grand Total? Please refer to the attachent file for reference.
Thanks a lot! Hope someone can help me.
Cheers,
Jen
Report ID: CRMR2W26 PARTIAL LOAN PREPAYMENTT MONTHLY SUMMARY REPORT Report Date: 08/04/2008
For the month of March
SR Creator SR No. Sales Opty Id Cash Amount($) CPF Amount ($) CIF No. Customer Name Salesperson Name Domicile Branch SR Status
Domicile Description
Branch
Code
Total amount
Grand Amount
Page 1
Report ID: CRMR2W26 PARTIAL LOAN PREPAYMENTT MONTHLY SUMMARY REPORT Report Date: 08/04/2008
For the month of March
SR Creator SR No. Sales Opty Id Cash Amount($) CPF Amount ($) CIF No. Customer Name Salesperson Name Domicile Branch SR Status
Domicile Description
Branch
Code
No records extracted
Page 1
Message was edited by:
user618088

This sounds like a Reports issue.
Perhaps you would be better asking in the Reports rather than the SQL and PL/SQL forum.
;)

How to repeat header in all pages of oracle report

Dear All,
Im using oracle developer suit 10g. I have a report. when i exectue that reports it contains 4 pages of data.
I have created a header. My problem is header is not repeating in all pages of reports..
Header is showing only in fritst page.
How can i resolve this..
Pl help me on this issue.
Regards,
Shitab

Hi Shitab,
In your paper layout, select the property of the frame you want to repeat and in that under Advanced Layout choose print objects on all pages.
Hope this will work. If not let me know...
Regards,
Soofi

Cfdocument repeat header issue

Similar Messages

Maybe you are looking for