CFIMAGE gives "attempt to read data outside of exif segment" error when trying to resize jpg

When trying to resize a jpg using cfimage I receive the following error "attempt to read data outside of exif segment".  Any ideas on what causes this or how to fix it?  This only happens on certain images.  Sample image it happens with attached, this photo is subject to copyright restrictions and should be treated appropriately.  Thanks for any help.
Resize Code attached.
<!--- Set some defaults used by each image type, unless you override them --->
<cfparam name="jpgQuality" default=".8" />
<cfparam name="defaultInterpolation" default="bicubic" />
<cfparam name="defaultBackground" default="black" />
<!--- Set values for each image type --->
<cfparam name="thumbMaxWidth" default="" />  <!--- leave blank to allow any width (forced to size by height) --->
<cfparam name="thumbMaxHeight" default="60" /> <!--- leave blank to allow any height (forced to size by width, above) --->
<cfparam name="thumbQuality" default="1" />  <!--- number from 0 - 1, 1 being the best --->
<cfparam name="thumbFixedSize" default="false" />  <!--- you MUST set both MaxWidth & MaxHeight to use FixedSize --->
<cfparam name="thumbBackground" default="#defaultBackground#" />  <!--- color of background if fixed size is used --->
<cfparam name="thumbInterpolation" default="#defaultInterpolation#" />  <!--- Interpolation method used for resizing (HUGE performance hit depending on what is used) --->
<cfparam name="normalMaxWidth" default="476" />
<cfparam name="normalMaxHeight" default="324" />
<cfparam name="normalQuality" default="#jpgQuality#" />
<cfparam name="normalFixedSize" default="true" />
<cfparam name="normalBackground" default="#defaultBackground#" />
<cfparam name="normalInterpolation" default="#defaultInterpolation#" />
<cfparam name="zoomMaxWidth" default="670" />
<cfparam name="zoomMaxHeight" default="380" />
<cfparam name="zoomQuality" default="#jpgQuality#" />
<cfparam name="zoomFixedSize" default="true" />
<cfparam name="zoomBackground" default="#defaultBackground#" />
<cfparam name="zoomInterpolation" default="#defaultInterpolation#" />
<!--- Set values for folder paths and the watermark image --->
<cfparam name="originalFolder" default="path to folder for original images" />
<cfparam name="thumbFolder" default="path to folder for thumbnail images" />
<cfparam name="normalFolder" default="path to folder for large images" />
<cfparam name="zoomFolder" default="path to folder for large resized images" />
<cfparam name="watermarkImage" default="" />
<cfparam name="wmXPosition" default="50" />  <!--- value is a number from 0 - 100, 50 = centered --->
<cfparam name="wmYPosition" default="65" />
<cffunction name="genWatermarkImage">
    <cfargument name="ImageFile" required="true" />
    <cfargument name="MaxWidth" required="true" />
    <cfargument name="MaxHeight" required="true" />
    <cfargument name="StorePath" required="true" />
    <cfargument name="FixedSize" required="true" type="Boolean" />
    <cfargument name="Background" required="true" />
    <cfargument name="Quality" required="true" />
    <cfargument name="Interpolation" required="true" />
    <cfargument name="AddWatermark" required="true" type="Boolean" />
    <cfif IsImageFile(originalFolder & ImageFile)>
        <cfset original = ImageNew(originalFolder & ImageFile) />
        <cfset originalHeight = ImageGetHeight(original) />
        <cfset originalWidth = ImageGetWidth(original) />
        <cfset outfile = StorePath & ImageFile />
        <cfset watermark = ImageNew(watermarkImage) />
        <cfset ImageScaleToFit(original,MaxWidth,MaxHeight,Interpolation) />
        <cfset new_w = ImageGetWidth(original) />
        <cfset new_h = ImageGetHeight(original) />
        <cfif FixedSize>
            <cfset normal = ImageNew("",MaxWidth,MaxHeight,"rgb",Background) />
            <cfset ImagePaste(normal,original,int((MaxWidth-new_w)/2),int((MaxHeight-new_h)/2)) />
            <cfif AddWatermark>
                <cfset ImagePaste(normal,watermark,( int(ImageGetWidth(normal)) - int(ImageGetWidth(watermark)) -3),( int(ImageGetHeight(normal)) - int(ImageGetHeight(watermark)) -3) )/>
            </cfif>
            <cfset ImageWrite(normal,outfile,Quality) />
        <cfelse>
            <cfif AddWatermark>
                <cfset ImagePaste(original,watermark,( int(ImageGetWidth(normal)) - int(ImageGetWidth(watermark)) -3), (int(ImageGetHeight(normal)) - int(ImageGetHeight(watermark)) -3) )/>
            </cfif>
            <cfset ImageWrite(original,outfile,Quality) />
        </cfif>
    <cfelse>
        <cfreturn "Image file not an image!" />
    </cfif>
</cffunction>
<cfset zoomError = genWatermarkImage(Filename,zoomMaxWidth,zoomMaxHeight,zoomFolder,zoomFixedSize,zoomBackground,zoomQuality,zoomInterp olation,dowatermark) />

Hmm, that was my best shot.
1) Do you have all of the latest updates applied?
2) Did you try all of the work-arounds listed in the comments. Granted some of them are definite hacks
3) Just to cover all the bases, do you get the same result with both ImageResize() and ImageScaleToFit()?
If all else fails, you could always go the java route and try some java code to do the resize.  Obviously not the ideal, but it is worth a shot.  IIRC there is a thread around here somewhere with the cf/java code. But that was from before the switch in forums and I will be darned if I can find it right now!
Update: I will play around the sample image you posted tomorrow. Just to see if I can come up with anything.

Similar Messages

  • Passing data from JavaScript to Applets (Error when trying to pass data)

    Hi,
    I've wrote a small applet for lists but when I try to pass data from my
    JavaScript to my applet, I get an "Error: Object doesn't support this property or method". I get this error with a select other sites including the page I'm writing, leading me to believe I may not have installed requried files or set required options. I've included the listing of the code snippet where the error occurs.
    document.listApplet.testMethod()OR when I use:
    document.applet(listApplet).testMethod()The applet is loaded by this statement:
    <OBJECT CODE="CustomAppletList" NAME="listApplet" ID="listApplet" WIDTH="1000" HEIGHT="600"></OBJECT>and loads fine but no data is passed through it's public methods. Can anyone suggest ideas how I can successfully pass data from my JavaScripts to my applets?
    Devyn

    this should work for you. In your javascript do this.
    var myApplet=document.listApplet;
    myApplet.testMethod()
    If you need more help let me know.
    Paul

  • The attempt to read data from the server failed

    Today I was looking into an error with several IMAP accounts in Apple Mail:
    +The attempt to read data from the server "<<servername.tld>>" failed.+
    At first I thought this was an Apple Mail problem, as the accounts in question seemed to work just fine when not used in combination. One possible answer to this problem is rather short:
    Apple Mail uses IMAP caching, which uses more than 4 connections at the same time to the mail server. Some mail servers (like courier-imap in its default configuration) do not allow that much connections from the same IP address. The more accounts you are trying to connect to at the same time raises this number of connections. Meaning while you could probably check one account for new mails, the second will ultimately fail for no obvious reasons. The only solution to this problem is to raise the connections allowed by your IMAP server software. this solution only applies to people who have root access to their mail server.
    in courier-imap you have to edit /etc/courier-imap/imapd
    and change MAXPERIP=4 to a higher number (5 to 10 times the number of accounts you want to check simultaneously)
    and change MAXDAEMONS=40 to a higher number (with only one user 200 might work, whereas if you serve multiple users, something like 500 or higher might be better suited).
    of course increasing the numbers increases load on your server. this is why there are these restrictions in place.

    MY SOLUTION REPOSTED FROM ANOTHER THREAD:
    I've just solved a similar issue.
    I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
    "The server error encountered was: The attempt to read data from the server..."
    I found solutions for those using IMAP mail:
    modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
    I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
    This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

  • Server error: "The attempt to read data from the server '(null)' failed"

    Multiple times during each day my client (Mail.app) puts up a little exclamation mark "!" next to the mail account hosted on our Leopard Server. Clicking on this little alert icon pops up a message that reads:
    +There may be a problem with the mail server or network. Verify the settings for account “Leopard Server Account” or try again.+
    +The server returned the error: The attempt to read data from the server “(null)” failed.+
    I can make the "!" go away by choosing Mailbox>Synchronize>Leopard Server Account. And everything seems peachy but it inevitably pops up again in another hour or two. It's annoying because I'm not sure if mail is getting through or not when the "!" is up.
    Any ideas why this is happening?

    MY SOLUTION REPOSTED FROM ANOTHER THREAD:
    I've just solved a similar issue.
    I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
    "The server error encountered was: The attempt to read data from the server..."
    I found solutions for those using IMAP mail:
    modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
    I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
    This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

  • Attempt to read data from the server failed...

    I'm getting the following error on one of my email accounts:
    +There may be a problem with the mail server or network. Verify the settings for account “[my account]” or try again.+
    +The server returned the error: The attempt to read data from the server “[my account]” failed.+
    I'd like to find out more about the error, so that I can start to track this down and see if there is a problem with the mail server settings, or if the problem is on my end.
    I don't see any reference to this error in the logs – would it be somewhere else?

    I've just solved a similar issue.
    I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
    The server error encountered was: The attempt to read data from the server...
    I found solutions for those using IMAP mail:
    modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
    I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, no IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
    This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

  • I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

    I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

    I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
    I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
    I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

  • Memory error when trying to fetch events by data range

    I keep getting the following memory error when trying to fetch events from my calendar server: CAPI_STAT_SERVICE_MEM_ALLOC
    I have checked the forum and found only one entry that talks about adjusting the -mx -oss settings for my JVM. However it is unclear if this change needs to be done to the server or the client where I am running the JVM. I have made these adjustments in my JDeveloper project and I still recive the error. I have checked the eng.log, cws.log and snc.log. The only entries found are:
    DATE = Thu Jun 2 16:53:24 2005
    PID = 12647; TID = 3076395840
    Trying to connect: Host = houoas2.us.oracle.com (127.0.0.1)
    Service = unidas
    DATE = Thu Jun 2 16:53:29 2005
    PID = 12647; TID = 3076395840
    Connection established: Host = houoas2.us.oracle.com (127.0.0.1)
    Service = unidas
    This is being done on a 10g calendar server. Any help would be appricated.

    Now that 10g and its associated CSDK are out and the 9.0.4.x CSDK is presumably frozen, would it be possible to make the 9.0.4.10 CSDKs - for each platform - available for downloading, unbundled from the massive server suite?

  • I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

    I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

    Make sure that no other Macs are backing up at the time.
    Pull the power cable from the back of the Time Capsule
    Count to ten
    Plug the power cable back into the back of the Tme Capsule
    Wait a few minutes, then try a backup again.

  • Ive got data on my phone and its keep saying network error when trying to connect

    Im trying to connect to internet when im out and about ive got data on my phone but it keeps saying network error when trying to connect

    Hi there,
    You may want to take a look at some of the troubleshooting steps found in the article below.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    -Griff W.

  • HT1222 my ipod reads error when trying to sync with itunes

    my ipod reads error when trying to sync to my itunes

    Hello, TheHelper1964.
    Thank you for the question.  There could be multiple causes to the errors that you are receiving.  I have included a couple articles that will help you troubleshoot this issue. 
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/TS2529
    If you are uncomfortable processing some of these steps, you can also reach out to us at http://expresslane.apple.com. 
    Hope this helps,
    Jason H. 

  • ORA-01552 Error when trying to import data

    I get the following error when trying to import data into my database. My version is as follows:
    Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
    PL/SQL Release 9.2.0.6.0 - Production
    CORE 9.2.0.6.0 Production
    TNS for Solaris: Version 9.2.0.6.0 - Production
    NLSRTL Version 9.2.0.6.0 - Production
    and I get the following error:
    ORA-01552: cannot use system rollback segment for non-system tablespace
    Any help would be appreciated.
    Also when I upgraded my database I received the following error message but continued without fixing:
    Warnings Ignored: Your database is using US7ASCII as the NCHAR type. In Oracle9i, the NCHAR datatypes (NCHAR, NVARCHAR2, and NCLOB) are limited to the Unicode character set encoding (UTF8 AND AL16UTF16) only. Refer to the Oracle 9i Database Upgrade Guide to change NCHAR columns in user tables to one of the supported types.
    Can I fix this via an sql statement or what?

    Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
    If you need more information, you will must see the next DOC-ID on Metalink site,
    Note:121971.1
    Luck.
    Have a good day.
    Regards.

  • -251723760 CIP Error when trying to read and array of sgl from and AB ControlLogix PLC

    I have the NI Ethernet/IP module to communicate with an Allen-Bradley ControlLogix PLC. I am doing both reading (only 13 values) and writing (over 200 values). I am using the basic ethernetip tag write.vi to  do the writing. These program are in an executable running on a 'run-time' machine. I have the list of tagnames I am reading and writing to and have confirmed with the person who created the AB load that the array I am writing to on the AB side has more than enough addresses (it is an array of length 300). However I am only able to write 118 values to it. When trying to write 119 or more I get the error:
    -251723760 CIP error - extended status may be available
    I have confirmed with NI OPC Servers with an OPC quick client (running on my development PC) connected to the AB ControlLogix that the values I am writing to up to element 118 are getting through correctly, i.e. if I write 123.456 to sample_array[13] then I in fact see this same value at that location in the OPC quick client.
    To be honest I am a little disappointed that the error message is so cryptic and gives no hints as to what troubleshooting paths are possible. I have tried various combinations of group/tag names with and w/o offsets, e.g. [3], but nothing has led me any further.

    Thanks for the quick response - here are screenshots of before (write OK - writing 118 values - all except last are 0) and after (error - when trying to write an array of length 119) as well as the simple test program I as using.
    Attachments:
    NI Ethernet_IP 3-20-2013 Troubleshooting.zip ‏90 KB

  • Cannot create data store shared-memory segment error

    Hi,
    Here is some background information:
    [ttadmin@timesten-la-p1 ~]$ ttversion
    TimesTen Release 11.2.1.3.0 (64 bit Linux/x86_64) (cmttp1:53388) 2009-08-21T05:34:23Z
    Instance admin: ttadmin
    Instance home directory: /u01/app/ttadmin/TimesTen/cmttp1
    Group owner: ttadmin
    Daemon home directory: /u01/app/ttadmin/TimesTen/cmttp1/info
    PL/SQL enabled.
    [ttadmin@timesten-la-p1 ~]$ uname -a
    Linux timesten-la-p1 2.6.18-164.6.1.el5 #1 SMP Tue Oct 27 11:28:30 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
    [root@timesten-la-p1 ~]# cat /proc/sys/kernel/shmmax
    68719476736
    [ttadmin@timesten-la-p1 ~]$ cat /proc/meminfo
    MemTotal: 148426936 kB
    MemFree: 116542072 kB
    Buffers: 465800 kB
    Cached: 30228196 kB
    SwapCached: 0 kB
    Active: 5739276 kB
    Inactive: 25119448 kB
    HighTotal: 0 kB
    HighFree: 0 kB
    LowTotal: 148426936 kB
    LowFree: 116542072 kB
    SwapTotal: 16777208 kB
    SwapFree: 16777208 kB
    Dirty: 60 kB
    Writeback: 0 kB
    AnonPages: 164740 kB
    Mapped: 39188 kB
    Slab: 970548 kB
    PageTables: 10428 kB
    NFS_Unstable: 0 kB
    Bounce: 0 kB
    CommitLimit: 90990676 kB
    Committed_AS: 615028 kB
    VmallocTotal: 34359738367 kB
    VmallocUsed: 274804 kB
    VmallocChunk: 34359462519 kB
    HugePages_Total: 0
    HugePages_Free: 0
    HugePages_Rsvd: 0
    Hugepagesize: 2048 kB
    extract from sys.odbc.ini
    [cachealone2]
    Driver=/u01/app/ttadmin/TimesTen/cmttp1/lib/libtten.so
    DataStore=/u02/timesten/datastore/cachealone2/cachealone2
    PermSize=14336
    OracleNetServiceName=ttdev
    DatabaseCharacterset=WE8ISO8859P1
    ConnectionCharacterSet=WE8ISO8859P1
    [ttadmin@timesten-la-p1 ~]$ grep SwapTotal /proc/meminfo
    SwapTotal: 16777208 kB
    Though we have around 140GB memory available and 65GB on the shmmax, we are unable to increase the PermSize to any thing more than 14GB. When I changed it to PermSize=15359, I am getting following error.
    [ttadmin@timesten-la-p1 ~]$ ttIsql "DSN=cachealone2"
    Copyright (c) 1996-2009, Oracle. All rights reserved.
    Type ? or "help" for help, type "exit" to quit ttIsql.
    connect "DSN=cachealone2";
    836: Cannot create data store shared-memory segment, error 28
    703: Subdaemon connect to data store failed with error TT836
    The command failed.
    Done.
    I am not sure why this is not working, considering we have got 144GB RAM and 64GB shmmax allocated! Any help is much appreciated.
    Regards,
    Raj

    Those parameters look ok for a 100GB shared memory segment. Also check the following:
    ulimit - a mechanism to restrict the amount of system resources a process can consume. Your instance administrator user, the user who installed Oracle TimesTen needs to be allocated enough lockable memory resource to load and lock your Oracle TimesTen shared memory segment.
    This is configured with the memlock entry in the OS file /etc/security/limits.conf for the instance administrator.
    To view the current setting run the OS command
    $ ulimit -l
    and to set it to a value dynamically use
    $ ulimit -l <value>.
    Once changed you need to restart the TimesTen master daemon for the change to be picked up.
    $ ttDaemonAdmin -restart
    Beware sometimes ulimit is set in the instance administrators "~/.bashrc" or "~/.bash_profile" file which can override what's set in /etc/security/limits.conf
    If this is ok then it might be related to Hugepages. If TT is configured to use Hugepages then you need enough Hugepages to accommodate the 100GB shared memory segment. TT is configured for Hugepages if the following entry is in the /u01/app/oracle/EXALYTICS_MWHOME/TimesTen/tt1122/info/ttendaemon.options file:
    -linuxLargePageAlignment 2
    So if configured for Hugepages please see this example of how to set an appropriate Hugepages setting:
    Total the amount of memory required to accommodate your TimesTen database from /u01/app/oracle/EXALYTICS_MWHOME/TimesTen/tt1122/info/sys.odbc.ini
    PermSize+TempSize+LogBufMB+64MB Overhead
    For example consider a TimesTen database of size:
    PermSize=250000 (unit is MB)
    TempSize=100000
    LogBufMB=1024
    Total Memory = 250000+100000+1024+64 = 351088MB
    The Hugepages pagesize on the Exalytics machine is 2048KB or 2MB. Therefore divide the total amount of memory required above in MB by the pagesize of 2MB. This is now the number of Hugepages you need to configure.
    351088/2 = 175544
    As user root edit the /etc/sysctl.conf file
    Add/modify vm.nr_hugepages= to be the number of Hugepages calculated.
    vm.nr_hugepages=175544
    Add/modify vm.hugetlb_shm_group = 600
    This parameter is the group id of the TimesTen instance administrator. In the Exalytics system this is oracle. Determine the group id while logged in as oracle with the following command. In this example it’s 600.
    $ id
    $ uid=700(oracle) gid=600(oinstall) groups=600(oinstall),601(dba),700(oracle)
    As user root edit the /etc/security/limits.conf file
    Add/modify the oracle memlock entries so that the fourth field equals the total amount of memory for your TimesTen database. The unit for this value is KB. For example this would be 351088*1024=359514112KB
    oracle hard memlock 359514112
    oracle soft memlock 359514112
    THIS IS VERY IMPORTANT in order for the above changes to take effect you to either shutdown the BI software environment including TimesTen and reboot or issue the following OS command to make the changes permanent.
    $ sysctl -p
    Please note that dynamic setting (including using 'sysctl -p') of vm.nr_hugepages while the system is up may not give you the full number of Hugepages that you have specified. The only guaranteed way to get the full complement of Hugepages is to reboot.
    Check Hugepages has been setup correctly, look for Hugepages_Total
    $ cat /proc/meminfo | grep Huge
    Based on the example values above you would see the following:
    HugePages_Total: 175544
    HugePages_Free: 175544

  • HT3546 I get an error when trying to back up on my TC. Message says - The backup disk image "/Volumes/Data/Macintosh.sparsebundle" could not be accessed (error -1).

    I get an error when trying to back up on my TC. Message says - The backup disk image “/Volumes/Data/Macintosh.sparsebundle” could not be accessed (error -1).
    Any suggestions

    See here...
    https://discussions.apple.com/message/20933934#20933934

  • Error When trying to load master data 0material

    Hi,
    I got the following error when trying to laod 0MATERIAL master data
    "value '000000000004343434 ' for characteristic 0MATERIAL is in external format     "
    "0MATERIAL : Data record 1 ('000000000004343434 '): Version '000000000004343434 ' is not valid
    Can anybody help me in resolving this issue.
    Regards

    Hi,
    Run transaction OMSL.
    Create an entry for MATCONV in the overview screen.
    Double click on this line and set the length parameter for MATCONV.
    the same transaction exists in the r/3 OLTP system compare the 2 systems to set the right values in the details screen in BW.
    Hope this helps
    Provide points if it does.
    Regards
    Lalan

Maybe you are looking for

  • Z87-G43 won't boot from Windows 8.1 64-bit DVD UEFI

    Hello, I recently purchased a Z87-G43. I have just updated it to the 1.7 firmware (I was having no end of strange issues with the 1.6 firmware that came on the board, the BIOS menu items would disappear, but that seems to have been resolved with the

  • SCCM sql query Client status if active or not in specific Collection

    I would like to create an sql report to show if config manager client is active or not in specific Collection  ,  im  using  the  query  belong to  "ManoharPusala" Thank  you  so  much    which  is   SELECT S.Name0 as 'Computer Name', S.User_Name0 as

  • I can't delete shared photostream folder

    I have several shared photostream folders and have used this feature a lot.  However, one of my folders appears to have a glitch.  I cannot delete from either my computer or iPhone.  I am not sure what caused it.  I am listed as the photostream folde

  • File name font (web gallery output)

    I am using CS4 with adobe bridge.  I have created some web galleries and have selected the option to show the file name.  This shows up just below the picture in the gallery.  The problem is the font is too light to show up against my chosen backgrou

  • Why unicode symbol (copyright) in textfield to drawString not interpreted?

    I have a textfield that I can type stuff into and have printed on a JPanel. However, when I type in some unicode, it's printed as the code not what it means. Why is this? how do I fix this? NOTE: to try this sample program, you have to type "\u00a9"