CFolder : How to fetch the additional fields enhanced using XML ?

Hi Champions,
We have enhanced the cFolders document create screen with 2 additional fields. this we could achieve through adding new fields in the Generic object XML file. And placing the same in the Web Dav Folders.
Now we need to fetch the data which are getting updated for each document against this new field.
We are not able to trace in BSP page , whether this gets saved against any table , or structure or some other mechanism the data are fetched.
We need some pointers to fetch this data so that we can use it for upgating, classification data of DMS, and additional content to the notification sent via cFolders when the status is changed etc..
Thanks for your inputs in advance,,,
Best regards,
shashikumar bs

Hi all,
We have got the answer.
pl refer thesame question in SAP Solutions - cFolders segment for the answer.
best regards,
Shashi

Similar Messages

How to create the additional field on Maintenace order

Hi,
For adding additional field on order -
I am aware about the facility in SAP, in which we can create the view profile, which contains the various tab pages and the sub tab pages(Which are subscreens). When we assign this view profile the order type then we can view the various fields selected in the view profile in the order screen in IW31 T code.
Now if i want to add some additional field then i can create the additional screen using the user exit and then assign it in customisation to the view profile and then to the order type.
But is it possible to add the field by using any other way?
If yes, request to let me know in detail alongwith the user exist if any.
Thanks

Hi all,
Thanks for the quick reply. As per as the field key is concerned, i dont want to use that.
I can add field by designing the new screen and adding it in the view profile but the main problem is that whenever i add the view profile to the order type, the standard tab pages are not appearing as a default and i have to add the screens as per the standard (to the view profile).
Pete
About IWO10018 -
I have gone through the documention of the user exit it says that to add the additional fields on the order header, one has to append the structure CI_AUFK with the custom fields/additional fields and then use the function EXIT_SAPLCOIH_018 and 19 to transfer the data to and from the screen area to the SAP but the one point i am not sure about is how the custom fields updated in the structure will get displayed on the main screen(to input the value into them into screen) .
Thanks
Edited by: Raghunandan Iyer on Jul 29, 2008 2:11 AM

How to return the result ( fields ) form using the BDC in background mode ?

hi,
I am now having to develop a sub routines for executing the transaction COR1 using BDC ( transaction SHDB ) , in the FORM i pass the 4 params for the fields of the screens of the transaction ( COR1 is used for creating the process order ) , and at last i have to take the number of the process order that has been created by the transaction , how can i do that , if we can no , in which table it is contained ( AUFNR ) ? .
In fact , i use the CALL TRANSACTION 'COR1' USING BDCDATA......
so , if you please to help me resolve this problem ( it is really urgent )...
Thank you so much .

Thank you so much for your reply , I think that it would be very useful to me .
Hi Vijay Sai , i have used the itab TYPE BDCMSGCOLL for calling the transaction but just for taking the error messages , so as you say , it contains all the values of the fields including AUFNR ( which i need to get the its value after creating with COR1 ) .......if it is right , we just need to access the new value by using the query at the internal table just like :
LOOP AT itab INTO wa.
if wa-fname = 'AUFNR' .
res = ws-fval .
ENDIF.
Is that right ?

How to fetch the active window details using system service

I am running one application as a service in windows OS. Its purpose is to fetch the all process name,process id and other details which are running currently by executing the tasklist /v command from Java and save the results in a text file.
I can able to fetch the all the details including window title when i run it in a user level.
when i launch it as system service,In a text file, it has process name,process id, username and all other details which are currently running in a Os but window title is always NA.
What is the reason ? is there any security limitation for that?

Hi Vel144
unfortunately you have posted your question in a forum dedicated to project/project server application, would suggest you to post your question in relevant forum, you will get help from experts there
Thanks | epmXperts | http://epmxperts.wordpress.com

How to fetch the data & display the data if fields got the same name in alv

hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028

Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal

How to fetch the Business area field value from MIRo into report

Hi,
I want to create a report for MIRO with payment details.
How to fetch the business area field value in to report.
What is the table name. I verified it is storing in structure. Which is the right table for fetching that value with reference to MIRO.
After that, how to find the accounting document for payment and check details.
What are the table names and field names. What we can get from PAYR table.
With regards
Lakki

Dear,
For Bussiness area
RKPF-GSBER

How can we add additional fields to the BP Search RESULT screen?

Dear Experts,
How can we add additional fields to the BP Search RESULT screen so that the BP's being displayed in a search result show maintained values for the particular column/field?
Thanks!!!

Hi Laxman,
I got same requirement for ibase hierarchy.I want to add new fields in Ibase hierarchy AB.Do you have any idea regarding this.My requirement is that ,i want to dispaly a fields as a check box which display that this component is in under warranty or not by checking the box.Plz tell ,how can i add a new field in tree type context node.I add a new fields using AET ,but that is not available in that AB.
Thanks
Vishwas Sahu
Edited by: vishwas sahu on Nov 17, 2009 1:51 PM
Edited by: vishwas sahu on Nov 18, 2009 5:22 AM

How to fetch the description of a field

Hi All,
Could anybody please tell me , how to fetch the field description for a given field name .Any function module for it or how to fetch it ??
Thanks in Advance.
Regards,
Rakesh.

Hi,
Copy paste this code and at the end of the code check the table len_table
data: len_table type standard table of DFIES .
   CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
    tabname              = 'JKAP'                   {color:red}" change as per your requirement{color}
   FIELDNAME            = 'VBELN'              {color:red}" change as per your requirement{color}
*   LANGU                = SY-LANGU
*   LFIELDNAME           = ' '
*   ALL_TYPES            = ' '
*   GROUP_NAMES          = ' '
*   UCLEN                =
* IMPORTING
*   X030L_WA             =
*   DDOBJTYPE            =
*   DFIES_WA             =
*   LINES_DESCR          =
TABLES
   DFIES_TAB            = len_table
*   FIXED_VALUES         =
* EXCEPTIONS
*   NOT_FOUND            = 1
*   INTERNAL_ERROR       = 2
*   OTHERS               = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Check out the internal Table len_table.
Hope it helps you,
Regards,
Abhijit G. Borkar

How do you add additional fields in infotypes?i want to leave blank space

how do you add additional fields in infotypes?i want to leave blank space in front of the field?

Hi,
To add new fields go to PM01 and select Enhance Infotype option and then follow the steps in sequence.
I am not getting blank space in front of the field. please elaborate it.
Regards,
Raja.D

How to populate the TEXT field in MIGO

Hi folks,
While creating material document in MIGO or MB01, i am inserting some data in TEXT ( Field in line item level ). This text data is disappearing , once mat doc is created.
how to populate the TEXT field in MIGO?Is there any cusomisation?it's urgent .
Regards
pabi

Hello Pabitra,
I had a similar issue in my Project.
Please verify if the SMOD enhancement MBCF0002 (EXIT_SAPMM07M_001) is active in your system.
If this is the case, verify from two angles:
a) Whether the Enhancement was accidentally activated - If yes, then De-activate the same
b) If there is some logic coded in the User Exit, but, the Text is somehow not determined...even the existing content in the text field (input to EXIT_SAPMM07M_001) will get vanished.
Hope that your problem will be resolved by this. Pls reward points.
With Regards
Vijay Gajavalli

How to fetch the payment details in to report

Hi,
I have the MIRo number, How to find the payment document number and check number so and so.
What are the transactions like: F053,FB03.
Let me know the process of payment after MIRO.
What are the documents we need to raise, how to find those documents, what is the link.
How to find the accounting document for payment and check details (from which tables).
What are the table names and field names. What we can get from PAYR table.
I want to create a report for MIRO with payment details.
How to fetch the business area field value in to report.
What is the table name. I verified it is storing in structure. Which is the right table for fetching that value with reference to MIRO.
With regards
Lakki
With regards
Lakki

Hi,
For Creating MIRO Document,
We have to create PO Me21n,
then Do GR - MIGO using PO Reference,
then we have to do MIRO Using then same PO. so the link is basically the PO. Then the Payment for the MIRO document is done in F-53/F-58 refering the MIRO document. the check number will be generated once we do the Check Print in
FBZ5.
You can assign the check number to the F-53 document either in Assignment Field or the Reference field Using FCHU.
Once you do this you can view all the Vendor Bill using Doc Type RE, KR & Vendor Payments Doc Type KZ.
You can use the Std Report FBL1N / FK110N
Hope its useful. Assign points if found use ful
Regards,
R.Ramakrishnaraj

How to fetch the VAT registration number of the ship to party from billing

Dear SDN Team
How to fetch the VAT registration number of the ship to party from the billing document. Can you proide some information for fetching the VAT registration number of the ship to party.
Normally only the payer VAT registration number will be displayed in the Invoice. But in my case the Ship to party VAT number is displayed.
I have resolved this problem by doing the customizing setting in order to have the payer vat registration number. But for the Old Billing documents it is more than 30,000 documents where it was printed with the ship to party VAT number. So i need to identify those documents.
Can you please help to resolve this problem.
With Regards,
Jai

Hi,
To get VAT from the ship to from Billing, You have to first fetch the BILLING NUMBER from the VBRK and then goto the Document flow in VBFA to get the SALES DOCUMENT NUMBER and with sales document you will get the SHIP TO number from the VBPA with the PARVW = SH
Once you got the SHIP TO , then goto the KNA1 and get the VAT ID in the field STCEG
so the logic will be as follows
VBRK---VBELN and then
VBFA--VBELN with the document Category as C
VBPA-VBELN and get the KUNNR with PARVW =SH
Now with KUNNR ( ship to ) get the VAT ID from KNA1-STCEG
regards,
santosh

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

How to insert the new field to standard scheduling agreement script form.

Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:-   Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of   document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
      document date (field EKPO-AEDAT).
Thanks & Regards
chinnu

open TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT&

How to get the value field of the return parameters for an action step in teststand sequence file programatically using c#

                Sequence mySequence = myEngine.NewSequence();
                mySequence.Name = "myAction";
                //Create new step of type Action and set Name
                Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
                mystep.Name = "GetStringObject";
                //Obtain the code module from the step
                DotNetModule myModule = mystep.Module as DotNetModule;
                //Set properties of the module
                myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
                myModule.ClassName = "Class1";
                myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
                myModule.MemberName = "StringObject";
                mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
                mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
                DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
                mySequence.Locals.GetPropertyObject("StringObject", 0);
                myModule.ClassReference = "Locals.StringObject";
                myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs ‏1 KB
ex1.gif ‏2305 KB

Please see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments

CFolder : How to fetch the additional fields enhanced using XML ?

Similar Messages

Maybe you are looking for