How to insert the new field to standard scheduling agreement script form.

Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:-   Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of   document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
      document date (field EKPO-AEDAT).
Thanks & Regards
chinnu

open TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT&

Similar Messages

How to insert a new field in the Report Designer

Hi all.
I have a query and a report, but the query evolve.
We have a new key figure (inside rows).
In the report designer, I check the data provider.
The new key figure is added in the catalog field.
Now, I would like to insert the new field in the report.
I add a new row in the report structure but it isnt what I want.
In this case, I add a second row inside an another keys figures block.
I want to create a new block for my new key figure
Thanks for your help
Céline

Yes, key figures is in the field catalog.
But When I do that " Insert a row ", Report designer create a " row 2 " below another key figures.
And it isn't what I want. I want a new block .
For exemple in the tab report structure (My new key figure is "Margin")
I do that
Group Level 1 : key figures
         Detail Area
                  Sales Amount
                               row1
                                      cell1
                                      cell2
                  Cost
                               row1
                                      cell1
                                      cell2
                               row2 ( the new row added)
                                      cell1
                                      cell2
But I want that:
Group Level 1 : key figures
         Detail Area
                  Sales Amount
                               row1
                                      cell1
                                      cell2
                  Cost
                               row1
                                      cell1
                                      cell2
                 Margin
                               row1
                                      cell1
                                      cell2
Thanks for your help

Modify and add new field in standard Purchase Order script

Hi All,
I have some problem with Modify and add some new fields in Standard Purchase Order script. From ME22n transaction code it display PO detail. In item detail with condition tab all data will display in Currently PO script output.
But I want to display ME22n->Item Detail->Invoice->Taxes Data. how to display this data in standard PO script. All data are fetch from Structure like ( KOMV,KOMVD..etc) then How it can be Display?
Waiting for Replay.
Himanshu Patel.

Work with an Abaper.Tell your requirement [ addition of a field] and ask him to include this field by using the functionality " Field Exit".

How to color the mandatory fields in a Adobe WebDynpro Java form

Hi Experts,
How to color the mandatory fields in a Adobe WebDynpro Java form?
This will avoid any confusion to he end user while filling the form as he would try to type something in field which is set as Read nlybut stil the cursor appears there.
Regards,
Shobhit

Hi Shobhit,
you can write something like xfa.host.setFocus(<text field name>). to set the focus or
<text field name>.fillColor = "120,120,123";
<text field name>.resolveNode"ui.#textEdit").border.edge.fill.color.value="120,150.200";
to fill the color.
Refer to adobe dev centger scripting samples to learn more on these.
Hope these helps.
Thanks and Regards,
- anto.

How to Create the new Field ( Table - Row) in SAP B1

I have a scenario in which the Purchase calculation is based on LR, so for that we have to add new field in Purchase Document. that filed is not available in form setting. kindly let me know how to Create a new field in Purchase document.
Thanks

Hi,
I have adding new & existing forms and creating User Defined Field in row. example on adding a field in an existing Form and its corresponding to the database, including user input validations?
I want to add a new field in the detail section ( row area ) of a Production Document, and save it to database and read it back when the document is opened.
Thanks.
Syed Waqar Khurshid

How to populate the new field of R/3 in BW

Hi,
There was a requirement to modify the sap screen in the R/3.
For the same a new field is created which populate the data via a table in R/3.
Now I have to populate the same field in BW. I am working on 3.5 Version.
In R/3 I have a data source and I am not able to see the same available in the data source
The field is available in the extract structure but I am unable to populate the same in the data source.
Kindly help.

The Data Source is picked from the FM.
Also,my requirement is to display the text values for the new field
I am going to create a Generic Master Data which will fetch the data from the table which has fields (Code, Langu and the text) and replicate the same to BW.
Now to populate the code in BW, I need to have the field in the data source and from there I can add the same code field in the bw comm/tran/etc...
The code is available in the Extraction and not in the data source.
At the reporting level I will extract the report based on key and text.
I tried using ROOSFIELD to populate the field in the datasource, but I am not able to do the same.

How to insert the new row after current row in RowIterator - Steve Muench

Hi,
Our client wants the new row to be added after current row on the front end instead of before current row.
we were using "new JUActionBinding(this,iterBinding,JUActionBinding.ACTION_CREATE_INSERT_ROW);" this code inserts the new row after current row.
I tried a lot to insert the new row after current row. Used new JUActionBinding(this,iterBinding,JUActionBinding.ACTION_LAST to move the cursor to last row in rowiterator and the used .ACTION_CREATE_INSERT_ROW but this thing inserts the new row as the second last row.
Could somebody plesae help ?
Message was edited by:
user556161

I am using JDeveloper 9.0.4.2.0 (Build 1459)

How to insert a new field without refreshing the data

Hi,
I have data of 3 years in a cube. I have to enhance a new field in that cube and i want the data will come from now onwards. I dont wanna have the data for the past 3 years.
Can anyone tell me how i can load the data of that field into the cube without refreshing the cube as cube has too much data.
Roma

Hi Roma,
It depend up on whether you are adding Cgharacteristic or Key figure. If you are adding key figure then no need to worry.
Just create the new keyfigure, add this in all your data flow and activate all the objects and assign proper transformation.
from next load you will get data for this field.
If you are addign data the this is a bit difficult than key figure. addign characteristic is nothing but you are making changes to your cube dimensions.
when you are changing your cube dimensions, you should delete the data before you transport the objects.
You can try once to transport the objects with out deleting data. If it fails then you have to delete the data from Cube.
Regards,
Venkatesh.

How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

Hi,
We have a requirement to add some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
Thanks,
Harry

Hello Harry,
Goto t.code SPRO ---> Display IMG ---> Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
Use the above path and create the screen and assign it to the sequence using the below link as reference.
**************** - Tips - Implementing screen exits for MM01/MM02/MM03
Regards,
Thanga

How to include the new fields added in R/3 into ESS application

Hi Experts,
I have used Standred ESS application.After Importing the ESS application via bapi(Import the model),they have added some more additional fields in R/3 Backend. How to call those customized fields in our ESS application?
Please help me on this..
Thanks.

There is no specific document/book for the steps i told you....but i can list them as:
1) Goto the Models component in the Webdynpro ...right click -> create new model.
2) Specify the name of the Model as you like ....the RFC destinations...next.
3) Specify the userid and password with RFC authorization in ECC
4) Specify the name of the Function Module you want to import....and Import.
5) Goto the Fc component -> Used Models section and add the model created earlier here..
6) Goto the Fc Component -> Context Tab -> create new model nodes and attributes ...and bind them to Structure fields of the Function Module...
7) Goto the Fc Component -> Interface Controller -> create nodes and attributes ...and bind them to the attributes created earlier
8) Goto the Vc Component-> Context Tab -> create new context nodes and attributes....and bind them to the attributes in the Interface controller....make sure the Fc componentis added as a Used component in Vc.
9)Finally create UI Elements on the Detail or Review view and bind the text property of the element to the attributes created in the Vc component.
Hope it helps.
Shikhil

How to enhance the new field(mblnr) into the cube.

Dear Experts,
My client wants GR document number and GR posting date in the drill down option in reporting, i have taken the field names of that. MBLNR and BUDAT, I only found BUDAT in the datasourse field level,please help me how to enchance MBLNR into the cube 0PUR_C01.
Thank You
Regards
Srikanth

SELF

How to insert the new toolbar icons to a ALV report in custom container

Hi,
I found the exporting parameter for excluding the toolbar icons in the method "set_table_for_first_display" but I didn't find any parameter for including the new toolbar icons. I do not want to include the toolbar icons through the PF-Status, but want to include them with the method. Please tell me is there any option of including toolbar icons with using the above method.
Thanks,
Srinivas.

Hi Srinivas,
Refer to the link
Adding buttons to standard alv toolbar in OOALV
Thanks

How to Insert the New Row in the Workbook (b/w the Records)

Hi All,
In my workbook, I have 10 records.
So my requirement is after 5 Records I want to Insert a New Row( ex: Total(1st Column) : SUM (2nd Column)of first five records )
And remaining records should display the same after inserted row.
For that what i did, Inserted a new row and put the sum for the first five records and save the workbook.
Problem is when I refresh the workbook, The inserted row is disappearing.
Please let me know can we do the aboue requirment or not?
Regards
Josu

Hello joji,
Please check this thread for changing working book template...
check the last post by Bhanu..
Re: Web Template creation .

How to insert the new Servlet Api Class files?

Hi,
I need to know how do I add the Servlet Api Class to my java directory
after i download it from the net? Thanks for your help in advance!

niceguyme,
If you downloaded the J2EE 1.3.1 API and installed it to (for example) c:\j2ee131, then what you need to add to your class path is:
c:\j2ee131\lib\j2ee.jar
I also add c:\j2ee131\lib\ejb10deployment.jar to the classpath, but it is not necessary.
there are several ways to add these to your classpath. It depends on what Operating System you are using. On windows 98 type OS, you can edit the autoexec.bat and add these directly to your already existing classpath. Windows NT,2000, and XP: you can add them to the system environment variables classpath. Hopefully you know how to do this on your machine. What I like to do on the windows machine is create a batch file that will start it from within a command prompt. I do this because there are times when I need to compile my code using different versions of the Java api. I am enclosing an example of one for J2se1.4.1 and j2ee1.3.1.
contents of java141.bat
@ECHO OFF
ECHO JDK 1.4.1 and J2EE 1.3.1 are current versions
set HOLD_CP = %CLASSPATH%
set HOLD_PATH = %PATH%
set CLASSPATH=.
set CLASSPATH=%CLASSPATH%;e:\jdk14\jre\lib\rt.jar
set CLASSPATH=%CLASSPATH%;e:\jdk14\lib\dt.jar
set CLASSPATH=%CLASSPATH%;e:\jdk14\lib\tools.jar
set CLASSPATH=%CLASSPATH%;e:\jdk14\lib\htmlconverter.jar
rem **** J2EE STUFF ****
set CLASSPATH=%CLASSPATH%;e:\j2ee131\lib\j2ee.jar
set CLASSPATH=%CLASSPATH%;e:\j2ee131\lib\ejb10deployment.jar
set CLASSPATH=%CLASSPATH%;%HOLD_CP%
set PATH=e:\jdk14\bin
set PATH=%PATH%;"C:\Program Files\TextPad 4"
set PATH=%PATH%;c:\windows\command
set PATH=%PATH%;%HOLD_PATH%I hope this helps.
TJJ

How to Insert the new line items in Billing

Hi Friends,
I have an issue in Billing process.
When the user is creating the billing document from Delivery document, then based on some conditions, I have to split the line item into 2 different line items(We have to change the Quantity and value).
Please let me know what are all the possible options.
Regards
Elini.P

Many times, there is no new line (unless there is some sort of list in the paragraph). Since Word (actually most editors now) word wraps automatically, the paragraph is usually (essentially) one long line that the editor wraps for you.
But, to tell you the truth, I don't see anywhere in that code where you are even attempting to find newline characters. What, exactly, are you trying to accomplish. I.e. what is your desired result (not the process you are envisioning to get there).

How to insert the new field to standard scheduling agreement script form.

Similar Messages

Maybe you are looking for