Chagne in value of Serverice PR
hi,
I want to change the price of service activity in PR but system is not allowing to do so because PO has been made from that PR, what to do to change the price of service PR
Regards
Kalpesh
Hi,
system does not allow to change the price in service pr after u save the pr and make one PO.
U need to change the pr value in two cases.
1- u need to reduce the value in pr. which is not required, as u made the po, the commitment is on account of PO, if u want to make it zero, then make the po value 1 rs in the limit.
2- If u want to need increase the value of pr, for making a new PO, then no need to increase the service pr value,rather increase the budget for that particular wbs element, and try to create the PO against the same pr, system will now accept as it ll chk the budget against the WBS rather the service PR value.
Hope it will help u.
ashis
Similar Messages
-
BI 7 list of variable values not shown in chagne variable values option.
Hi,
In BI7 queries i face a problem like the first time you execute a query it asks for selection options ,then the next time if we want to change the variables we have a option "change variable values" in the menu bar to change it,but unlike BW 3.5 it is not showing the entire list of values it shows only the history or the present values we choose,this restricts from selecting any desired values from the list.
Is there any way to resolve this problem,your suggestions will be really helpful.
Thanks,
G.Monica Roja Flora.After you click on the box in the variable selection screen you will get another window "Select Values for XXXX". In the first box you will have a drop down box which will show "History", Favorites", "Single Values" & "Value rabges". Then in the bottom right there is a button "More" when you click on it it will open to show the selections already made.
Hope this helps.
Bhargava -
Scrollable cluster arrays as control, writing programmatically at the same time?
I would like to have a cluster array (just an example, you may suggest better solution), where each row (cluster-element) contains signal selection from combobox, and its value and unit.
I would like to have a signal list, where in each row, I can select which signal I want to show e.g. "motor speed", "motor torque", "motor power". And when signals are selected, the value of the
signals are automatically updated elsewhere. So basicly, I want to select which signals I monitor, and then watch them change over time. I use single cluster array because I want it to be scrollable. The problem is:
* let's say I have one row in the array. Then I add a row by editing the control in the GUI (now the array control has size 2).
* I have property node (write: array control -> value) to update the values and units in my software.
* I use array control output as the input in the subVI where I read my selections and write updated signal values.
* It can happen that I use that array control output when it still has size 1, and while I have added the second element, the software updates the control, and overwrites my new element addition.
So, I run into writing conflict. Only single user, just this problem. How should I avoid this?
(e.g. how can I know that user is not interacting with the control, so that I can update its value and unit fields)First suggestion is to post the code you have.
But that being said what you want to do can be done. I think the problem you are having is a race condition between the user and the software. Where the user chagnes the value and the software changes it back. I suggest reading the value of the control and replacing its value but keep the signal names the user entered, then write that back to the control.
Another suggestion is to have two separate arrays, one that is signal selection, and one is values. Then you only need to update the values table with the new data and the signal names never get overwritten. You'll likely want to couple the two arrays so when one index value changes the other changes with it. This can be done with an independent scrollbar control.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously. -
Drop down values for table in a view not getting populated dynamically
Hi Experts,
The problem which i am facing is as follows
In an existing web dynpro component , i already have a view and it consists of table which has 3 columns.All the three columns are non editable
MATERIAL MAT_DESC MAT_DEL_FLAG
ABC
EFG
HIJ
Now i need to add 2 more columns after the MAT_DEL_FLAG.These two PLANt and STORAGE LOCATION columns must have drop down values
The context refers to a standard Database ZTABLE to which these two fields are added.
MATERIAL MAT_DESC MAT_DEL_FLAG PLANT STORAGE_LOCATION
ABC
EFG
HIJ
The Plant column must have the drop down values based on Material .
If we select some value for Plant , then based on the value of plant the storage location drop down values must be populated.
So as per this logic , the drop down values for plant for each row must be different.
Please let me know how to achieve this.
This is a normal table and not an ALV table.
Also please let me know whether the drop down field must be drop down by key or drop down by index.
This is very urgent.
Thanks in advance
SindhuRefreshing things again for you -
1. As I have already pointed, create 2 context attributes for VALUESETS for both plant and St.loc.
2. Create dropdown by indexes for both of them, assign valusets to respective attributes using node information.
3. Go to the plant dropdown and create the action for it ONSELECT event - when you chagne the dropdown of plant then populate the respective storage loc.
4.Now, As you are selecting a row (leadselect) you have populated the plant and loc details....write the code for lead selection event of the table
You will get the lead selection index right using node interface (IF_WD_CONTEXT_NODE)
LOOP AT ITAB INTO WA_ITAB.
if sy-tabix eq lv_lead_index.
clear wa_valuset.
wa_valueset-key = 'X'. "plant
wa_valueset-value = 'X'.
append wa_valueset to it_valueset1.
* popultae the storage location valuset based on the plant selected (bydefault it is 1 right in dropdown)
clear wa_valuset.
wa_valueset-key = 'XX'. "storage loc
wa_valueset-value = 'XY'.
append wa_valueset to it_valueset2.
else.
* Fill the valusets for all other rows as different or as per your requirement.
endif.
wa_itab-valuset1 = lt_valueset1.
wa_itab-valuset2 = lt_valueset2.
modify itab from wa_itab transporting valuset1 valuset2.
clear wa_itab.
ENDLOOP.
lo_node->bind_table ( it_tab).
Now for that Row, if a plant value is changed, respective storgae loc has to be filled right...then in that ONSELECT of plnat drodpwon again you need to write a piece of code...using the same code with a little modifications.
Hope this is clear.
Check this article on the same - but here ALV is used...the concept is same use it for your table -
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0cbdde3-fe58-2c10-fcbc-8db18e693877?QuickLink=index&overridelayout=true
the above code you hvae pasted - i think it fills only for the 1st time....
Regards,
Lekha.
Edited by: Lekha on Dec 20, 2011 12:00 PM -
Hello Experts,
I want to recalculate on assets depreciation values. Before do that I need two GL reports to verify the chagnes. 1. before doing recalculate and 2. after doing the recalculation for depreciation area 01 and 32. How can I get these reports.
Many Thanks with Anticipation!
BobIf you are on version 6.0 than run FAGLB03 (version < 6.0 run FS10N) for the accum depr GL account and get the before and after values.
-
I have a function that worked pretty good until now processing a single records at the time, but now the application requirements has changed. It is required the same function to process any number of records that the application will enter as criteria. I tried to use a (ref)cursor, but I cannot use the returning value inside.
So, the chagne is below - instead of test_id = X, rownum <101 for example.
How can I make it work?
Thanks a lot for the help.
Mj
create table TEST ( test_id number, test_col varchar2(100));
insert into TEST values (1 , 'RAM' );
insert into TEST values (2, 'ram' );
insert into TEST values ( 3, 'rAm' );
set serveroutput on
DECLARE
v_delete_test_id number(9, 2) :=0;
BEGIN
DELETE FROM test
WHERE TEST_ID =1 -- the change is here using now where rownum<101 or 10
RETURNING test_id
INTO v_delete_test_id;
commit;
dbms_output.put_line('test_id ' ||v_delete_test_id|| 'returned');
END;
/http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/tuning.htm#sthref2236
-
Get all values from request.getParameter
In ASP, I can do something like that...
For each item in Request.Form
Response.write "Name is:" & item & " value is:" & Request(item)
Next
How about in JSP? How do i get the names and values of the form using a loop?You can use request.getParameterNames() which will return an enumeration, then you can iterate through the enumeration and use request.getParameterValue(String paramName) method to get the values.
-
Error while assigning a character value to a numeric variable.
I fire a sql statement and check the number of rows returned by the sql.
I check this result with the application logs.
The application logs keeps the sqls fired by the application and the no of rows returned, in the example below the sql returned 8454 rows.
My script compares the two results.
***********Application Log***********
4/14/2008 11:15:01 AM: 0059 SQL SELECT "CLUSTER_CD",
4/14/2008 11:15:01 AM: 0060 "PRODUCT_DESC",
4/14/2008 11:15:01 AM: 0061 "TEAM_CD"
4/14/2008 11:15:01 AM: 0062 FROM "OPS$TMS"."MAP_CLUSTER_TEAM_PROD"
4/14/2008 11:15:01 AM: 3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD, 8,454 lines fetched
***********Application Log***********
My script:
#!/bin/ksh
typeset -i resA
typeset -i resB
opstms_conn_string="abc/[email protected]"
set `sqlplus -s $opstms_conn_string << EOF
set pages 0
WHENEVER SQLERROR CONTINUE
SELECT count(*)
FROM MAP_CLUSTER_TEAM_PROD;
exit
EOF`
resA=$1 ##returns 8454
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}'`
##resB returns 8,454
## here i get syntax error
if [ $resA -eq $resB ]; then
echo "QA passed for sql1"
else
echo "QA failed for sql1"
fi
The problem is as resB is integer variable it does not accept character value: 8,454 so returns a syntax error:
How do I change the value assigned to resB into a numeric variable?
error:
+ grep 3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD, BCVP_Main_Loader.qvw.log
run.ksh[52]: 8,454: syntax errorChange:
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}'`
to this:
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}' | tr -d ,`
to drop the comma. Or you could do it in awk(1):
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{ gsub( /,/, "", $10 ); print $10}'`
Or you could to it all in awk(1):
resB=`awk '
/3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD/ {
gsub( /,/, "", $10 )
print $10
' BCVP_Main_Loader.qvw.log`
(This example was not tested, it's just for a model.)
Someone more of an SQL guru than I can probably tell you how to change your numeric locale to avoid presenting those commas in the first place and avoid the problem.
HTH -
Issue in Creation of new Value Field in CO-PA
Hi,
I have a query in CO-PA Value Field Linking.
In my Development Client,
1. Created a New Value Field (No Transport Request Generated)
2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
Please Advise.
Thanks in Advance,
SafiThanks Phaneendra for the response.
The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
Please Advise.
Thanks,
Safi -
Query help : Query to get values SYSDATE-1 18:00 hrs to SYSDATE 08:00 hrs
Hi Team
I want the SQl query to get the data for the following comparison : -
Order Created is a Date Column , and i want to find out all the values from (SYSDATE-1) 18:00 hours to SYSDATE 08:00 hours
i.e.
(SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 08:00:00.
RegardsHi, Rohit,
942281 wrote:
If i want the data in the below way i.e.
from (SYSDATE-1) 18:00 hours to SYSDATE 17:59 hours ---> (SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 07:59:00.If you want to include rows from exactly 18:00:00 yesterday (but no earlier), and exclude rows from exatly 08:00:00 today (or later), then use:
WHERE ord_dtl.submit_dt >= TRUNC (SYSDATE) - (6 / 24)
AND ord_dtl.submit_dt < TRUNC (SYSDATE) + (8 / 24)
So can i use the below format : -
ord_dtl.submit_dt BETWEEN trunc(sysdate)-(6/24) and trunc(sysdate)+(7.59/24) . Please suggest . .59 hours is .59 * 60 * 60 = 2124 seconds (or .59 * 60 = 35.4 minutes), so the last time included in the range above is 07:35:24, not 07:59:59.
If you really, really want to use BETWEEN (which includes both end points), then you could do it with date arithmentic:
WHERE ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - (6 / 24)
AND TRUNC (SYSDATE) + (8 / 24)
- (1 / (24 * 60 * 60))but it would be simpler and less error prone to use INTERVALs, as Karthick suggested earlier:
WHERE ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - INTERVAL '6' HOUR
AND TRUNC (SYSDATE) + INTERVAL '8' HOUR
- INTERVAL '1' SECONDEdited by: Frank Kulash on Apr 17, 2013 9:36 AM
Edited by: Frank Kulash on Apr 17, 2013 11:56 AM
Changed "- (8 /24)" to "+ (8 /24)" in first code fragment (after Blushadown, below) -
Unable to capture return values in web services api
At the time of login to web services if my server is down ,
it returns following error :
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1438)
at java.lang.String.substring(String.java:1411)
I want to capture this error so that i can try another server to login. how do i capture this error
Another place where i want to capture the return Value is when i look for a report on the server
rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
"@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
oInfoObjects = rh.getInfoObjects();
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
Here if the report is not there on the server , it returns a null handler exception.
but if i try catching it by checking my responsehandler is null like rh == null it does not catch it.
Any help will be appreciated
thanks
Rakesh GuptaTed : i have two cases
1) server = server_st.nextToken();
providerURL = "http://"server"/dswsbobje/services";
sessConnURL = new URL(providerURL + "/session");
Connection boConnection = new Connection(sessConnURL);
Session boSession = new Session(boConnection);
EnterpriseCredential boEnterpriseCredential = new EnterpriseCredential();
boEnterpriseCredential.setLogin(userid);
boEnterpriseCredential.setPassword(pwd);
boEnterpriseCredential.setAuthType(auth);
SessionInfo boSI = boSession.login(boEnterpriseCredential);
I have got a list of servers running web servcies stored in my tokens. when i pass the first server name say " test:8080" and that server is down , i want to catch somewhere in the code above that it did not get the connection so that i can loop back and try with the second server say test1:8080
This is for failover purposes.
at present when i was trying to capture return value of boSI it breaks giving the error
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1438)
at java.lang.String.substring(String.java:1411)
2nd case :
I am geeting reports from the server and scheduling them:
i run the following code which works fine if reports is there
rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
"@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
oInfoObjects = rh.getInfoObjects();
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
Here if the report is not there on the server then i should be able to catch from the response handle rh that it has got a null value.
but rh does not return a null value
the code ultimately throws a null handle at the following line
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
i am not able to catch the null value there also.
hope you got my issue. -
Unable to capture the parameter values from a PL/SQL procedure
hi.
i'm trying to capture the parameter values of a PL/SQL procedure by calling inside a anonymous block but i'm getting a "reference to uninitialized collection error" ORA-06531.
Please help me regarding.
i'm using following block for calling the procedure.
declare
err_cd varchar2(1000);
err_txt VARCHAR2(5000);
no_of_recs number;
out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
cntr_var number:=0;
begin
rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
dbms_output.put_line('The error is ' ||err_cd);
dbms_output.put_line('The error is ' ||err_txt);
dbms_output.put_line('The cntr is ' ||cntr_var);
for incr in 1 .. OUT_SIGN_TAB.count
loop
cntr_var := cntr_var + 1 ;
Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN_TAB(incr).txn_type||','||OUT_SIGN_TAB(incr).objid);
end loop;
end;
Error is thrown on "for incr in 1 .. OUT_SIGN_TAB.count" this line
Following is some related information.
the 3rd parameter of the procedure is a out parameter. it is a type of a PL/SQL table (SEARCH_SIGN_TAB_TYPE) which is available in database as follows.
TYPE "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
TYPE "SEARCH_SIGN_TYPE" AS OBJECT
(ref_no VARCHAR2(22),
ciref_no VARCHAR2(352),
ac_no VARCHAR2(22),
txn_type VARCHAR2(301),
objid VARCHAR2(1024))............We don't have your rt843pq procedure, but when commenting that line out, everything works:
SQL> create TYPE "SEARCH_SIGN_TYPE" AS OBJECT
2 (ref_no VARCHAR2(22),
3 ciref_no VARCHAR2(352),
4 ac_no VARCHAR2(22),
5 txn_type VARCHAR2(301),
6 objid VARCHAR2(1024))
7 /
Type is aangemaakt.
SQL> create type "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
2 /
Type is aangemaakt.
SQL> declare
2 err_cd varchar2(1000);
3 err_txt VARCHAR2(5000);
4 no_of_recs number;
5 out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
6 cntr_var number:=0;
7 begin
8 -- rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
9 dbms_output.put_line('The error is ' ||err_cd);
10 dbms_output.put_line('The error is ' ||err_txt);
11 dbms_output.put_line('The cntr is ' ||cntr_var);
12 for incr in 1 .. OUT_SIGN_TAB.count
13 loop
14 cntr_var := cntr_var + 1 ;
15 Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN
TAB(incr).txntype||','||OUT_SIGN_TAB(incr).objid);
16 end loop;
17 end;
18 /
The error is
The error is
The cntr is 0
PL/SQL-procedure is geslaagd.Regards,
Rob. -
Unable to capture field values in Master agreement Line Items
I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
collectionbean = lineItemCollection.get(i);
partNum = ""+collectionbean.getPartNumber() ;
Quantity = ""+collectionbean.getQuantity();
throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AMThis will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel -
Unable to capture value inside parameter T_LFBK of FK03 in display mode
Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PMHi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM -
Unable to capture Input field value on BSP page
Hi
I have copied ROS (SRM) standard application ROS_PRESCREEN3 into custom and added one input field .
Now when user enters some value in it , i am not able to get that value in my back-hand code.
I have treid the availble code on Fourm , its not working .
Regards
RaulHi ,
I am getting the input field values in my back hand using MVC .
Regards
Raul
Maybe you are looking for
-
How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.
-
How do I add to my data plan on the iPad once I have run out and no longer have an internet connection? I am working out of the country and got a message that I was running low,followed immediatly by a you're out message.
-
trying to open a word document in pages, no images, diagram r tables are seen, states problems are text frames not supported and that images can not be imported. the document opens fine in mircosoft office. can this be fixed or do i need to buy micro
-
Friends, i want stop using of one With Holding tax Code in income type 194J in Country IN.how can i give the validation for this. Thank u in Advance, Satyam
-
Compile in Dos mode problem?
After having found HelloWorldApp.java(source file in c:\windows\java\dir) and c:windows\java>(to which I add , javac)and get the message:This program cannot run in Dos mode. any detailed suggestions appreciated.. (path variable correct/using Windows