Change Application and Server Name
Hi Gurus
How Can we change the name of Application and Application Server? What possible steps will be involved in it?
Thanks
SNK
Application name is not really a problem, changing the server name is not the nicest depending on how the products have been registered, you would have to take a look at the shared services registry report.
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
I want to change IP and Host Name of application serve
our application server is on IBM AIX platform and now i want to change IP and Host Name of application server?
Hi Again;
For Ip please see:
How to change the IP Address for a Release 11i Instance ? [ID 364099.1]
How to Change IP Address in an Oracle Applications Environment [ID 553318.1]
PS:Please mention your EBS version
Regard
Helios -
Migrate Active Directory 2008 to 2012 but need to keep the same ip address and server name
Hi,
Current setup is 2 DCs in one site running 2008 R2 AD.
We are planning to migrate from 2008 R2 to 2012 R2 but need to keep the same ip address and server name. I have came up two plans to do this and hope someone can tell me which one would be the best approach. What is the pros
and cons in Plan A and B or may be plan C if there is a better one?
First, I was planning to do plan A but just had a second thought of Plan B. My concern in Plan A is about changing the server name when the new 2012 R2 already running as DC. Plan B would be changing all the old server
name and ip before they become member sever and DC.
Any information and suggestion would be very appreciated.
Plan A
Run adprep /forestprep on 2008 R2 DC
Build a new 2012 R2 server and promote it as 3rd DCs in current Domain
Transfer FSMO from 2008 R2 to 2012 R2
Run Repadmin /syncall to force replication
Rename the demoted 2008 R2 DC to something else
Change the demoted 2008 R2 ip address to something else
Restart the demoted 2008 R2 server to take effect
Now, run Netdom computername command to change the new 2012 R2 server name to the old 2008 R2 DC server name
Change the new 2012 R2 DC's ip to old 2008 R2 DC's ip
Run ipconfig /flushdns
Run ipconfig /registerdns
DCDIAG to see any error
Plan B
Build 2 new 2012 R2 standalone servers
In 2008 R2 ServerA transfer FSMO to 2008 R2 ServerB
Demote 2008 R2 ServerA to become member server
Rename 2008 R2 ServerA to something else and change the ip address to something else and shut it down
Now, rename one of the new 2012 R2 standalone server to the old demoted 2008 R2 ServerA name
Change the new 2012 R2 standalone server ip to the old demoted 2008 R2 ServerA's ip address
Add the new 2012 R2 standalone server (now with the old 2008 R2 ServerA name and ip) to become member server
Run adprep /forestprep on the 2008 R2 ServerB
Promote the new 2012 R2 (now with the old 2008 R2 ServerA name and ip) as DC
Transfer 2008 R2 ServerB FSMO to the new 2012 R2 DC (now with the old 2008 R2 ServerA name and ip)
Demote 2008 R2 ServerB as member server
Rename 2008 R2 ServerB to something else and change the ip address to something else and shut it down
Now, rename the 2nd new 2012 R2 standalone server to the old demoted 2008 R2 ServerB name
Change the new 2012 R2 standalone server ip to the old demoted 2008 R2 SeverB 's ip address
Add the 2nd new 2012 R2 standalone server to become member server
Promote it as DC
Run DCDIAG to check error
Thanks.Hi,
Renaming a Domain Controller is a risky operation which may lead to issues, therefore, I would suggest you go with the Plan B, rename the server before it becomes DC.
Here is a blog below which could be helpful to you:
Remove an Old DC and Introduce a New DC with the Same Name and IP Address
http://blogs.msmvps.com/acefekay/2010/10/09/remove-an-old-dc-and-introduce-a-new-dc-with-the-same-name-and-ip-address/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] -
DNS url changes to with server name URL
We have created dns url for our sharepoint site, but users click on some links urls get changed to with server name URL
Like http:\\server1:81\main\
and i have created new subsite and all the pages comeu p with server name url instead on DNS URL
Can someone help me with this?
Thanks,Make sure the new DNS URL is in the Default Zone for AAMs. Also make sure none of your content is using hard-coded paths, instead using relative paths.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Change the Exchange server name in outlook
Hello All,
Configured two Exchange server 2010. Both server have Mailbox, CAS and HUB installed. All the user use outlook (Exchange Client). All outlook configured with exchange server host name not mapi name. Now i need to change the exchange server name in outlook.
Is there any procedure to change the Exchange server name for outlook automatically. Please suggest.
ThanksHi,
Let’s begin with the partition named when RPC endpoint Changes in the following article:
http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
“To add further on the cas array, the Outlook clients with an existing Outlook profile would continue to use the old RPC endpoint rather than the new RPC endpoint (even though Autodiscover detected the change). This is because the old RPC endpoint does not
return an ecWrongServer response to the client. The RPC endpoint accepts the connection; therefore, Outlook ignores the Autodiscover response because it has a working connection.”
In this case, except with recreating a profile, we can move mailboxes to force the Outlook client to do a profile discovery and update the profile based on new information.
For more information about moving mailboxes, please refer to the following article:
http://technet.microsoft.com/en-us/library/bb124495(v=exchg.141).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working totally fine
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Change seller and developer name?
Hi,
I am new member, not sure if this the right section to asking question,
I like to know how to change seller and developer name in AppStore?
I wish change to my wife name as special give to her on our special day
Most the suggestion from the making of this app are from her ideas.
I hope this will make my wife very proud and happy
Thank you for your helpFor Development based questions please use the Development Forum here:
https://discussions.apple.com/community/developer_forums -
Change seller and developer name at AppStore
Hi,
I am new member,
I like to know how to change seller and developer name in AppStore?
I wish change to my wife name as special give to her on our special day
Most the suggestion from the making of this app are from her ideas.
I hope this will make my wife very proud and happy
Thank you for your helpApple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
Change IP and Host name of the server
Hi,
Db :11.2.0.3
Os:Aix6
OS team are going change IP address and host name of the server which has ASM and DB.
What are the things we need to follow for this?
Thanks & Regards,
VNOS team are going change IP address and host name of the server which has ASM and DB.
What are the things we need to follow for this?1. TNSNAMES.ORA files everywhere
2. LISTENER.ORA on server
If there are thin JDBC clients, change IP/hostname in their connection URLs. -
How to change Host and domain name on APS 10g R2
Hi,
I have installed oracle application server 10g rel.2 I want to change the host and domain of the system, what should I do, Plz help.
Thanks and Regards.
KhawarHi,
Thanks to all of you for reply, I started without reading any manual to modify host and domain name and after expending several hours finally decided to reinstall APS, with new installation forms runing ok but report server having problem if you see the status of report server in enterprise manager it shows green mark(if you want to stop it via EM it will not), if you check with Report Queue manager it says no report server with the given name,
if you check the report with GETSERVERINFO via browser it says
"REP-51002 Bind to report server AAAAA failed. some one have idea."
some one plz explain me how can I fix it.
Thanks and Regards.
Khawar -
Problem with Connection Manager. Can't change connection string / Server name
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin-top:0cm;margin-right:0cm;margin-bottom:10.0pt;margin-left:0cm;line-height:115%;font-size:11.0pt;font-family:'Calibri','sans-serif';}
.MsoChpDefault
{font-size:10.0pt;}
.MsoPapDefault
{line-height:115%;}
@page Section1
{size:612.0pt 792.0pt;margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.Section1
{page:Section1;}
Hi,
I have copied a number of SSID packages from a live server to my test server and am trying to get them up and running but I have a problem with the connection. The only thing that is different is the server name. I decided to keep the same connection in the connection manager as it is referenced in a dtsConfig file. I changed the dtsConfig file to reference the new servername [Data Source= new test server name]. I also check my paths and they are pointing to the correct config locations etc.
I found this post which was similar to my problem but I still get problems with the connection
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1319961&SiteID=1
I updated the connection by changing the server name in the actual connection. I did this from the data flow tab in the Connection Managers sections (MS Visual Studio). Right clicked - Edit - changed the name of the server name to my test server and selected the database. Test connection was fine, and saved this.
Once I saved this, the connection string changed to my current test server in the properties of the connection. However when I run the package I get the following error:
Error: 0xC0202009 at ReportsImport, Connection manager "myconnectionstring": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Error: 0xC020801C at Myprocess import from file, BuyAtReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionstring" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Myprocess import from file, DTS.Pipeline: component "ReportsImport" (79) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Myprocess import from file, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Myprocess import from file: There were errors during task validation.
So even if I change the existing connection properties and save and Build my package again, my connection properties (connectionstring, servername etc) all revert back to its original data source when I re-open the package. Simply it does not seem to be saving the connection properties i put in.
What am I doing wrong or how can I change the existing connection manager to look at the new server. The database is the same and I have full admin privilege on the server.
I don't want to recreate my packages as there are alot and they are not simple.
After changing the connection properties, saving and reloading I get a connection error. But this is because it is not retaining the new connection manger setting i entered.
Incidentally - I created a new SSID to perform a simple connection and write to the the server and it was OK so there is no problem with actually seeing the my test server.
Thanks in advanceYes, the package is in visual studio and I have executed it. There are no errors but in the output i have the error message about my connection. My dtsConfig file is added to the project in the 'Package Configuration Organizer' and path and files are correct. This is the output error:
Error: 0xC020801C at xx import from file, xxReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionname" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I will try and run it using dtexec.exe. if I have two config files do i use
dtsexec.exe /f <packagename> /conf <configfile> /conf <secondconfigfile> -
Server name changed but old server name reflecting
Hi Experts,
Issue is In the SQL server name is changed.
When the user is logging on SAP old server name is appearing and in SAP 8.8 there is no option of change like in SAP 2005B and 2007B so no database is appearing on screen.
What should be done in such condition.
Thanks & Regards -
Mona.In 8.8 you need to add and maintain servers through the license manager of the server tools. Open license manager settings and click the button on the bottom left (Configure Security). Enter your B1 site users details and then in the next screen you can define an additional server as well as remove the old one; I had the exact same issue a few days ago!
-
I want to change the domain name and the server name ( I do not want
mydomain, myserver) while installing
weblogic as an NT service. After installing and starting weblogic from NT
services program, weblogic does not start
But if I start it from the command script, it starts
Thanks
madhuHi,
I could start weblogic as an nt service by changing the name of the
default server and domain. I had to include password in the
installNTservice script.
Thanks
Madhu
Michael Young <[email protected]> wrote in message
news:[email protected]..
Hi.
Please open a case with BEA support.
Thanks,
Michael
m holur wrote:
I want to change the domain name and the server name ( I do not want
mydomain, myserver) while installing
weblogic as an NT service. After installing and starting weblogic from
NT
services program, weblogic does not start
But if I start it from the command script, it starts
Thanks
madhu--
Developer Relations Engineer
BEA Support -
Changing Oracle (winnt) server name
If we want to change the server name, how can we do this so that oracle will continue to run?
On versions Oracle 8.0.4 and 8.0.5 you need to change the server name in the listener.ora file.
-
How to change author and producer name in garageband?
I would like to change the author name and producer name completely in my garageband.
leonieDF wrote:
Edgar,
the settings will be used on the exported file, but not on the project file.
I see what you mean. I thought the question was about the exported file.
However, regarding the metadata for the actual GarageBand project file, you still can edit that directly in GarageBand without editing the plist file insided the GarageBand Package file.
Here is a screenshot that illustrates the connection.
My Info
Only the Album Name will be used as the Projects Metadata when you change that entry in the My Info window and save the porject. You can see it in the plist editor under
<key>com_apple_garageband_metadata_albumName</key>
Podcast/Movie Track
Here is the hidden trick. The two properties "Artist" and "Composer" can be set in the Track Info window for the Movie or Podcast Track. Even if you don't use any of those two in your song, you still can make them visible and change that info. Making any changes and save the GarageBand file will display the updated metadata in the plist editor under the two porperties:
<key>com_apple_garageband_metadata_artistName</key>
<key>com_apple_garageband_metadata_composer</key>
Finder: Get Info
Of all the four fileds in the My Info window, only the ArtistName is listed in the Get Info windowfor the GarageBand project file (with the lable "Author")
Although very intersting, I didn't include those details in my GarageBand manual because this info is too geeky and a bit too much for the average GarageBand user
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'
Maybe you are looking for
-
No OpenGL in "Save For Web and Devices"?
My Mac Pro has an NVIDIA 8800 GT, listed among tested cards for CS5. I have OpenGL accelleration on and set for Vertical Sync, but I notice significant tearing when dragging an image about in the "Save for Web" window.
-
"Stock in transit" account import
Hi All, I am importing oItemWarehouseInfo. In Business One on Item Master Data -> Stock Data tab we can set the gl accounts used, and there is an account: Stock in Transfer. I understand it is used to distinguish between transactions of A/P Credit Me
-
Please help me retrieving my MacBook User ID and Password !!!! URGENT !!!
-
Ask for code after 1 min.?
Doesn't THE function of ask For code after 1 min. ask THE code after 1 min. after unlock öre only after 1 min. after I turn my iPhone on?
-
How to enable server-side include in OS X 10.8
Do I need to modify apache2/httpd.conf directly, or is there a higer level way to do this? If need to modify httpd.conf, exactly how? thanks.