Change bytes per sector windows server 2012

Hi,
We have installed windows server 2012 Datacenter Edition on
Cisco UCS C24 M3 server. We need to install this with 4K bytes per sector and 4K bytes ber physical sector. When we specify the unit size while formatting it only changes the
bytes per cluster.
We have tried to change it with 8K & 64K but in OS it shows only in
512 Bit per sector. I have tried to get hotfixes for the same but i didn't got it for server 2012.
Please help me to resolve this.
Balkrushna

Have you looked at this:
http://msdn.microsoft.com/en-us/library/windows/desktop/hh848035(v=vs.85).aspx

Similar Messages

Remote Desktop Configuration on Windows Server 2012 R2

Hi, I wanted to see if anyone knows how to access the console that was known before as Terminal Services Configuration.
I've been having trouble with some servers that have 2 or more NICs and sometimes the RDP protocol won't listen on the right IP and I can't connect until I disable the other NICs.
Usually in 2008 R2 I would just go on this console and define the specific IP Address in which the RDP Protocol should be listening to, but know I can't find this console anywhere on 2012 R2.
Any ideas on how I can get there or change this setting on Windows Server 2012 R2?
Thanks
Eduardo Rojas

Hi,
Based on my research, please try the following on your Windows Server 2012 R2.
1. Start Registry Editor.
2. Navigate to the following registry key (path may wrap):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}
3. Under this key are one or more keys for the globally unique identifiers (GUIDs) corresponding to the installed LAN connections. Each of these GUID keys has a Connection subkey. Open each
of the GUID\Connection keys and look for the Name value. Choose the connection you want Terminal Services to use.
4. When you have found the GUID\Connection key that contains the Name setting that matches the name of your LAN connection, write down or otherwise note the GUID value.
5. Then navigate to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\lanatable. Using the GUID you noted in step 5 select subkey. Note it's LanaId.
6. Navigate to the following value:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp\LanAdapter. Change it's data to the value you noted in step 6. If you want RDP to listen on all LAN
adapters enter value of 0.
Note: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you
modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, please refer to
How to back up and restore the registry in Windows.
Hope this helps.
Jeremy Wu
TechNet Community Support

Using Windows Server 2012 per-User RDS CAL on Server 2008 R2 Session Host

I have a Remote Desktop Licensing Server setup on my domain controller running Windows Server 2012 R2. I have installed a
’Windows Server 2012 Remote Desktop Services per-User CAL’ there and activated the licensing server already.
Currently I use ONLY Windows Server 2008 R2 machines as RDS Session Hosts (in the future I plan to transition them to 2012 R2, hence the CAL I bought is
already in the newest version).
I have already configured my WS 2008 RDS Session Hosts: set
Per-User licensing mode and specified license server address. The connectivity between my Session Host(s) and my License Server seems to be ok as the
Remote Desktop Session Host Configuration window on the Session Host correctly lists the 2012 per-user
license (CAL installed on server) from the license server.
On the License Server I can also see event logs entries (in
Microsoft-Windows-TerminalServices-Licensing/Admin), indicating that the user has been issued a license.
The issue I am having is that the license being issued is
2008 Per User CAL license (Build-in OverUsed - temporary) and not the 2012 Per User CAL license which is the only license installed on the server. According to the RDS CAL interoperability matrix at
social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx, I was expecting the 2012 license to be backward-compatible with 2008 client (and that
in the absence of legacy licenses, the (only) 2012 license would be used for all clients connecting to the licensing server)
Before I bought my license, I found this document:
download.microsoft.com/download/3/D/4/3D42BDC2-6725-4B29-B75A-A5B04179958B/WindowsServerRDS_VLBrief.pdf
which says that - "newer version RDS CALs can be used with an older version of the server software" (In section FAQ, Q4), which means to me that
the 2012 license would work as-is for the 2008 Server and gives me flexibility when upgrading to the new server version.
How can I make this CAL work in my environment?
Note:
I have already explicitly disabled
Prevent license upgrade Group Policy setting which I assumed would fix the issue but nothing has changed.
Then I have enabled License server security group Group Polity setting
and added computers from my domain to RDS Endpoint Servers AD group. I have also created new AD group called
Terminal Server Computers and added the computer accounts there, but it changes
nothing. Reference - technet.microsoft.com/en-us/library/ee791761.aspx , technet.microsoft.com/en-us/library/cc725704.aspx and blogs.msdn.com/b/rds/archive/2009/09/17/control-the-issuance-of-rds-cals.aspx.
I found one potential ‘workaround’ which involved manually downgrading my CAL license by calling
Microsoft Clearinghouse. I am very reluctant do to so because, as I upgrade parts of my infrastructure to Server 2012, I’d need to then ask Microsoft to manually upgrade a part of my license back as well.
Am I missing something? What should I do to get my 2012 CAL to be issued to 2008 R2 server

Hi, I have tried several other possibilities.
I change expire date for my temporary assigned license (2008 CAL overused). It can be done, by changing Active Directory user properties – msTSExpireDate. When I restart my Session Host server and logged again, my license was renewed
for next 60 days (event ID - 4145).
I also delete information about license for this user (clear msTSExpireDate and msTSLicenseVersion). And the license was successfully removed from License Manager. After another SH restart it gets the same – 2008 overused – license
(event ID 4143 - license server has successfully issued …)
I now, that changing info in AD attributes is a little trick, and this is not a real value - only a reference, but it was useful to delete or change expiration date of license. But it didn’t change type of license as I expected.
Reference -
http://discussions.citrix.com/topic/243320-windows-2008-licensing-questions/
To TP:
I have found your post with information:
If you have a Server 2012 RD Licensing server you may install your 2012 RDS CALs on it (no downgrade necessary) and then set your Server 2008 R2 RDSH to
use the 2012 RDL server. The 2012 RD Licensing server will automatically issue the CALs as 2008. -
https://social.technet.microsoft.com/Forums/windowsserver/en-US/6046ded1-96bf-4d79-89ce-38aac2a6694e/can-we-use-windows-server-2012-rds-cal-license-in-rds-2008-r2-server?forum=winserverTS
And it showing my situation in brief. I also found
similar problems, but the solutions don’t meet my expectations.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dcfb1966-89a8-4b5d-bf5a-ff03ac0b7a66/rds-cal-licenses-not-recognized?forum=winserverTS
– “sudden all of the CALS were available”
https://social.technet.microsoft.com/Forums/windowsserver/en-US/f1228599-8452-4a3e-a263-061de14bfcfe/server-2012-rds-builtin-overused-cals-issue?forum=winserverTS
– “this should go away after a while”
Is there a way to determine this time you mentioned before? Or should I just wait patiently…

Unable to Change Screen Resolution in Remote Session - Windows Server 2012 R2

Does anybody know of a way to allow Remote Desktop users to adjust their own screen resolution in a remote session under Windows Server 2012 R2? We are struggling with this and can't seem to find a solution.
When users login to their RDP session and try to adjust their screen resolution this message is displayed in Control Panel:
"The display settings can't be changed from a remote session."
We don't want to use the "make text and other items larger or smaller" scaling feature, as this produces undesirable results with some of our applications. We also don't want to have to support multiple types of RDP clients or RDP shortcut
files.
We have looked at other posts but can't find an answer that applies to Windows Server 2012 R2. The closest thing we could find is KB2726399, but it only applies to Server 2008.
Does anybody have a solution for Server 2012?
Thanks

Hi,
Currently you cannot change the resolution from within the session. This is normal and expected behavior.
Unfortunately this means you need to set the desired resolution before connecting by using custom .rdp files, manually within the Remote Desktop Client, custom web launch page, custom windows launch program, etc.
-TP

Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.

Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks.

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

Is there a way to change the Windows Update service startup type on Windows Server 2012 R2?

We have a number of newly built 2012 R2 servers that we have HP Operations Manager agent running on that monitors the status of several services and reports if they are "stopped". One of these services is Windows Update. Every day we
get at least one alert saying:
"Service "Windows Update" is not started. Current state is stopped"
Checking the event logs shows that the Windows Update service stops, then a while later it just starts again. Not an error, just an information event.
In Windows 2012 R2 the Windows Update service is set to "Automatic (Trigger Start)", where in previous versions we run (2012/2008R2) it would be set to just "Automatic" or "Automatic (Delayed Start)"
I have come to understand that this behaviour is normal for Windows 2012 R2, and that Trigger Start services by design stop themselves after a period of inactivity. I was unable to find any info on how this works. Our client would like this to
be changed and the Windows Update service stay running all the time, understanding that this impacts performance.
Is there a way to change the Windows Update service in Server 2012 R2 to the old Automatic startup behaviour so that it stays running all the time instead of stopping and starting periodicall? There is no option to do this via the services mmc
gui.
So far I have tried:
Removing the Triggers using the command: sc triggerinfo wuauserv delete
This works temporarily, the service then shows as just Automatic in the services console, however if you restart the server or restart the service it goes right back to being Automatic (Trigger Start).
Any kind of help would be appreciated.

This one might help.
Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows 8.1 pro client on a Windows server 2012 R2 Essentials domain, how to change lock when idle?

Hi,
I need to find out how to do something?
I have Windows 8.1 pro running on my PC and its part of a domain which is Windows Server 2012 R2 Essentials, it all runs perfectly except for a little niggle where my Win 8.1 PC locks after its not used for a short time. What I want to find out is
how to change this so it no longer locks when idle? I know this is a security feature but as its just my home pc it can be very annoying to log in again after walking away from the PC for a few min's.
I've had a look through the default domain policy but there are so many settings that I can't find it, that's even if there is a setting there?
Anyway can anyone help?
Thanks
JK
JK MCP

Hi,
We can try to implement by use High performance power plan or GPO to prevent computer from locking down:
Refer to the solution here:
http://social.technet.microsoft.com/Forums/en-US/0863112d-ee54-4808-9d27-0380d7bf04b0/gpo-to-disable-lock-computer-?forum=winserverGP
Also, you can check if there is any task scheduled for idle:
Task Conditions
http://technet.microsoft.com/en-us/library/cc721902.aspx
Hope these could be helpful.
Kate Li
TechNet Community Support

Failure Configuring Windows Updates. Reverting Changes Windows Server 2012 Server 2012

Hello,
Server is activated.
Server has installed 1 year ago.
Windows Update logs:
########### AU: Initializing Automatic Updates ###########
2014-10-15 03:11:32:232
984 1528
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
2014-10-15 03:11:32:232
984 1528
AU AIR Mode is disabled
2014-10-15 03:11:32:232
984 1528
AU # Approval type: Pre-install notify (User preference)
2014-10-15 03:11:32:232
984 1528
AU # Auto-install minor updates: No (User preference)
2014-10-15 03:11:32:232
984 1528
AU # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Pre-install notify)
2014-10-15 03:11:32:232
984 1528
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-15 03:11:32:234
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-10-15 03:11:32:234
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:11:32:235
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:11:32:565
984 1528
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-10-15 03:11:32:569
984 1528
AU AU finished delayed initialization
2014-10-15 03:11:32:599
984 1528
AU Obtained Post reboot hr from Agent:8024000c
2014-10-15 03:11:32:627
984 1528
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
2014-10-15 03:11:32:627
984 1528
AU Triggering Offline detection (non-interactive)
2014-10-15 03:11:32:655
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-10-15 03:11:32:656
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:11:32:656
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:11:32:657
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-10-15 03:11:32:658
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:11:32:658
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:11:32:664
984 196c
WuTask WUTaskHandler successfully started the task.
2014-10-15 03:11:32:664
984 1528
AU #############
2014-10-15 03:11:32:664
984 1528
AU ## START ## AU: Search for updates
2014-10-15 03:11:32:664
984 1528
AU #########
2014-10-15 03:13:32:753
1908 61b4
Misc =========== Logging initialized (build: 7.8.9200.16925, tz: -0000) ===========
2014-10-15 03:13:32:753
1908 61b4
Misc = Process: C:\Windows\system32\wuauclt.exe
2014-10-15 03:13:32:753
1908 61b4
Misc = Module: C:\Windows\SYSTEM32\wucltux.dll
2014-10-15 03:13:32:753
1908 61b4
CltUI AU client got new directive = 'Notify mode, security updates available, safe to show scn detection', return = 0
2014-10-15 03:13:32:755
1908 61b4
AUClnt User ready to accept notifications evaluated as quns:5, ready: Yes.
2014-10-15 03:13:32:780
1908 61b4
CltUI AU client got new directive = 'Notify mode, security updates available scn notification', return = 0
2014-10-15 03:13:32:670
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:670
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:678
984 1528
AU AU setting pending client directive to 'Notify mode - safe to show scn detection for security updates available notification'
2014-10-15 03:13:32:680
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:680
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:692
984 1528
AU Launched new AU client for directive 'Notify mode - safe to show scn detection for security updates available notification', session id = 0x2
2014-10-15 03:13:32:755
984 8d4
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:755
984 8d4
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:757
984 8d4
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:757
984 8d4
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:759
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:759
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:776
984 1528
AU AU setting pending client directive to 'Notify mode - security updates available scn notification'
2014-10-15 03:13:32:777
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:777
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:778
984 1528
AU Changing existing AU client directive from 'Notify mode - safe to show scn detection for security updates available notification' to 'Notify mode - security updates available scn notification', session id = 0x2
2014-10-15 03:13:32:780
984 8d4
AU WARNING: Pending directive, 'Notify mode - security updates available scn notification', is not applicable
2014-10-15 03:13:34:863
984 1528
AU AU received handle event
2014-10-15 03:13:34:866
984 1528
AU AU setting pending client directive to 'Notify mode - security updates available scn notification'
2014-10-15 03:13:34:866
984 1528
AU WARNING: Pending directive, 'Notify mode - security updates available scn notification', is not applicable
2014-10-15 03:14:13:630
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-10-15 03:14:13:630
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:14:13:630
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:24:14:638
984 1528
AU ########### AU: Uninitializing Automatic Updates ###########
Some workaroud has been made.
sfc /scannow
Start>Run
type cmd and press enter
type net stop wuauserv and press enter
type rename c:\windows\SoftwareDistribution softwaredistribution.oldand press enter
type net start wuauserv and press enter
type exit and press enter
net stop wuauserv
del c:\windows\SoftwareDistribution /q /s
del c:\windows\SoftwareDistribution /q /s
net start wuauserv
C:\Windows\system32> rename c:\windows\SoftwareDistribution softwaredistributio.oldand
C:\Windows\system32>Dism /Online /Cleanup-Image /CheckHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
No component store corruption detected.
The operation completed successfully.
C:\Windows\system32>Dism /Online /Cleanup-Image /ScanHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
[==========================100.0%==========================]
The component store is repairable.
The operation completed successfully.
C:\Windows\system32>DISM /Online /Cleanup-Image /RestoreHealth

2014-10-19 20:09:17:025
5264 1aa0
Misc =========== Logging initialized (build: 7.8.9200.16925, tz: -0000) ===========
2014-10-19 20:09:17:025
5264 1aa0
Misc = Process: C:\Windows\Explorer.EXE
2014-10-19 20:09:17:025
5264 1aa0
Misc = Module: C:\Windows\system32\wucltux.dll
2014-10-19 20:09:17:025
5264 1aa0
CltUI FATAL: CNetworkCostChangeHandler::RegisterForCostChangeNotifications: CoCreateInstance failed with error 80004002
2014-10-19 20:09:17:025
5264 1aa0
CltUI WARNING: RegisterNetworkCostChangeNotification: Error 80004002
2014-10-19 20:10:40:665
980 8e0
Handler CBS called Error with 0x800f0816,
2014-10-19 20:10:40:665
980 320
Handler Async stage operation completed with 0x800f0816
2014-10-19 20:10:40:821
980 320
Handler Request generation for CBS update complete with hr=0x0 and
2014-10-19 20:10:47:468
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP9E38.tmp with dwProvFlags 0x00000080:
2014-10-19 20:10:47:468
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:47:468
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:47:468
980 320
EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
2014-10-19 20:10:47:468
980 320
PT WARNING: Cached cookie has expired or new PID is available
2014-10-19 20:10:47:468
980 320
PT WARNING: PTWarn: Anonymous plug-in skipped for WU
2014-10-19 20:10:47:530
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:47:530
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:47:530
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:47:530
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:47:530
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:47:530
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:47:530
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP9E77.tmp with dwProvFlags 0x00000080:
2014-10-19 20:10:47:530
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:47:530
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:47:530
980 320
EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Regulation URL: "https://fe2.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx"
2014-10-19 20:10:47:530
980 320
DnldMgr Regulation server path: https://fe2.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
2014-10-19 20:10:47:686
980 320
DnldMgr * Regulation call complete. 0x00000000
2014-10-19 20:10:47:686
980 320
DnldMgr *********** DnldMgr: New download job [UpdateId = {58E4783D-EE04-4F3B-885F-6799F55A1365}.201] ***********
2014-10-19 20:10:47:686
980 320
DnldMgr * Queueing update for download handler request generation.
2014-10-19 20:10:47:686
980 320
DnldMgr Generating download request for update {58E4783D-EE04-4F3B-885F-6799F55A1365}.201
2014-10-19 20:10:49:652
980 320
Handler Generating request for CBS update 58E4783D-EE04-4F3B-885F-6799F55A1365 in sandbox C:\Windows\SoftwareDistribution\Download\4a74e4e0a072b6d6948e86fd12589a6a
2014-10-19 20:10:49:652
980 320
Handler Selected payload type is ptExpress
2014-10-19 20:10:49:667
980 320
Handler UH: DpxRestoreJob returned 0x80070002
2014-10-19 20:10:49:667
980 320
Handler Detected download state is dsHavePackage
2014-10-19 20:10:50:416
980 8e0
Handler CBS called Error with 0x800f0816,
2014-10-19 20:10:50:416
980 320
Handler Async stage operation completed with 0x800f0816
2014-10-19 20:10:50:463
980 320
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2014-10-19 20:10:50:463
980 320
DnldMgr *********** DnldMgr: New download job [UpdateId = {58E4783D-EE04-4F3B-885F-6799F55A1365}.201] ***********
2014-10-19 20:10:50:603
980 320
DnldMgr * All files for update were already downloaded and are valid.
2014-10-19 20:10:50:603
980 1908
AU >>## RESUMED ## AU: Download update [UpdateId = {2695DD3F-2D0A-4409-BF66-C0CE7C05E899}, succeeded]
2014-10-19 20:10:50:603
980 320
DnldMgr *********
2014-10-19 20:10:50:603
980 320
DnldMgr ** END ** DnldMgr: Begin Downloading Updates [CallerId = AutomaticUpdates]
2014-10-19 20:10:50:603
980 320
DnldMgr *************
2014-10-19 20:10:50:603
980 320
DnldMgr *********** DnldMgr: Begin Downloading Updates [CallerId = AutomaticUpdates] ***********
2014-10-19 20:10:50:603
980 320
DnldMgr * Call ID = {DA5D08E9-E9B3-4749-881B-9FF8F1BC4FE2}
2014-10-19 20:10:50:603
980 320
DnldMgr * Priority = 2, NetworkCostPolicy = 6, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-10-19 20:10:50:603
980 320
DnldMgr * Updates to download = 1
2014-10-19 20:10:50:603
980 320
Agent * Title = Security Update for Windows Server 2012 (KB2973501)
2014-10-19 20:10:50:603
980 320
Agent * UpdateId = {2346EB42-185C-49CC-9856-190C294FE502}.202
2014-10-19 20:10:50:603
980 320
Agent * Bundles 1 updates:
2014-10-19 20:10:50:603
980 320
Agent * {041EDA5D-FF28-450B-AA8C-557161884100}.201
2014-10-19 20:10:50:603
980 320
DnldMgr Adding revision ID 202 for update 2346EB42-185C-49CC-9856-190C294FE502 to the lock revision cache.
2014-10-19 20:10:50:603
980 320
DnldMgr Adding revision ID 201 for update 041EDA5D-FF28-450B-AA8C-557161884100 to the lock revision cache.
2014-10-19 20:10:50:603
980 320
DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}] ***********
2014-10-19 20:10:50:603
980 320
DnldMgr Contacting regulation server for 5 updates.
2014-10-19 20:10:50:603
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:50:603
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:603
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:603
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:50:619
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:619
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:619
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMPAA89.tmp with dwProvFlags 0x00000080:
2014-10-19 20:10:50:619
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:619
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:619
980 320
EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
2014-10-19 20:10:50:619
980 320
PT WARNING: Cached cookie has expired or new PID is available
2014-10-19 20:10:50:619
980 320
PT WARNING: PTWarn: Anonymous plug-in skipped for WU
2014-10-19 20:10:50:666
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:50:666
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:666
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:666
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:50:681
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:681
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:681
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMPAAC8.tmp with dwProvFlags 0x00000080:
2014-10-19 20:10:50:681
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:681
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:681
980 320
EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Regulation URL: "https://fe2.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx"
2014-10-19 20:10:50:681
980 320
DnldMgr Regulation server path: https://fe2.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
2014-10-19 20:10:50:837
980 320
DnldMgr * Regulation call complete. 0x00000000
2014-10-19 20:10:50:837
980 320
DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
2014-10-19 20:10:50:837
980 320
DnldMgr * Queueing update for download handler request generation.
2014-10-19 20:10:50:837
980 320
DnldMgr Generating download request for update {041EDA5D-FF28-450B-AA8C-557161884100}.201
2014-10-19 20:10:56:141
980 320
Handler Generating request for CBS update 041EDA5D-FF28-450B-AA8C-557161884100 in sandbox C:\Windows\SoftwareDistribution\Download\4a3782ca0835c37539a9429b96d709b7
2014-10-19 20:10:56:141
980 320
Handler Selected payload type is ptExpress
2014-10-19 20:10:56:141
980 320
Handler UH: DpxRestoreJob returned 0x80070002
2014-10-19 20:10:56:141
980 320
Handler Detected download state is dsHavePackage
2014-10-19 20:10:58:295
980 8e0
Handler CBS called Error with 0x800f0816,
2014-10-19 20:10:58:295
980 320
Handler Async stage operation completed with 0x800f0816
2014-10-19 20:10:58:498
980 320
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2014-10-19 20:10:58:498
980 320
DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
2014-10-19 20:10:58:591
980 320
DnldMgr * All

Unable to login Windows Server 2012 after making local policy changes

Experts, we have modified the local policy setting on the windows server 2012 and badly it was domain controller now none of the users are able to login to the server. After entering the user name and password it will launch till welcome screen then it errors
out saying user name or password incorrect. below are the steps which we followed
1. Policy setting is located in Computer Configuration\Security Settings\Local Policies\Security Options \Network security: Configure encryption types allowed for Kerberos values change from Not Configured to DES_CBC_MD5
2. changed user attribute msDS-SupprtdEncryptionTypes to 2 , this account we were used for kerberos authentication.
3. Logged off from the server and then server doesn't allow any user to login.
regards,
Jakk

Have you tried connecting to the server from a 2nd DC? Have you tried installing the RSAT tools on a domain member server and modify the offending policy ?
last choice would be restart the DC into safe mode.

Change Windows Server 2012 colors

Hi
Changing Windows Server 2012 colors is not possible by default without editing the registry.
The location within the registry to change the colors seems to be HKCU\Control Panel\Colors
But:
Comparing these registry entries in Windows Server 2012 with the same entries in Windows 8, which colors are totally different, it is surprising that all RGB color values are exactly identical.
I guess, that this registry part might be the one of previous Windows versions, while the current location to change Windows colors seem to have moved.
Where is the new location within the registry to change Windows Server 2012 colors?
Patrick

Hi,
As far as I know, the HKCU\Control Panel\Colors is still used for Windows 2012, it is same as Windows 8.
You can also find the registry “HKEY_CURRENT_USER\Control Panel\Desktop\Colors” to change the colors.
For more detailed information, please refer to this article:
How to Access “Advanced Appearance Settings” Option and Change Font Size, Color in Windows 8:
http://www.askvg.com/how-to-access-advanced-appearance-settings-option-to-change-text-size-in-windows-8/
In addition, the article maybe helpful for you to deal with
Windows Server 2012 colors:
How to set inactive title bar color in Windows 8:
http://answers.microsoft.com/en-us/windows/forum/windows_8-desktop/how-to-set-inactive-title-bar-color-in-windows-8/70315c3d-e984-4b5b-8ae9-0e1c6e3523eb?auth=1
I hope this helps.

Windows server 2012 standard (server time getting change)

Hello,
Microsoft,
As I mentioned in the title am facing a problem with windows server 2012 standard.
Issue: server timing is getting change automatically and at the same time other client cannot able to access the data and application, since that server has primary domain controller.
kindly consider this as high priority and do the needful.
thank you
Regard
sagar
contact 9686491004

Hi
Is your server set to sync time from AD or externally?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

VMs per Windows Server 2012 Std License?

Hello All,
Can anybody help me please? I have a question in Windows Server 2012 Std License.
1. If I have 2 Windows 2012 STD Licenses ( 2 CPUs) howmany VMs ( Windows 2012 Server OS installed) can I have on the same Physical Server?
2. Can we assign more than 1 license to a host?
3. If the limit is 4 VMs( 4 Windows server 2012 Std VMs) can we have more/other VMs ( like Linux) in-addition to 4 eligible VMs?
Thanks in advance,
Sudhir

In the Hyper-V world, virtual machines are not licensed. Microsoft does not require that you purchase a license for a virtual machine, ever.
Microsoft does require that you purchase a license in order to run a virtual instance of Windows, always. So, if you have 3 virtual instances of Windows Server Standard, then you need to purchase two Windows Server Standard licenses for the host, because
each license allows for up to two virtual instances of Windows Server Standard.
Since Microsoft does not require that you purchase a license for a virtual machine, they will not charge you to run non-Microsoft operating systems inside them. Whether or not you have to pay for a Linux virtual instance is entirely dependent
upon the licensing of that Linux distribution. Any checks you write for them wouldn't be to Microsoft, though.
This means that, yes, you can legally run an unlimited number of Linux guests on Hyper-V without paying additional licensing fees to Microsoft. If you are using Hyper-V Server and have no Windows guests, you won't pay Microsoft anything. If you are using
Windows Server with Hyper-V and have no Windows guests, then you have to pay for a single host license but you won't pay Microsoft anything else.
In the scenario that you presented, the necessary Microsoft licensing for a dual-core host with WS12-Std installed, 3 WS12-Std guests, and any number of Linux guests will be covered by two WS12-Std licenses. You have one leftover WS12-Std instance that
you can legally run on that host.
Eric Siron
Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.

ASA and RADUIS on Windows server 2012

hi i have ASA5505 i want to get the Authentication from Raduis Server using NPS on windows Server 2012 i test the Raduis Server over "Kerio Control VMware Virtual Appliance" its work Perfect for testing my Setting on Raduis but with the ASA5505 i get this message "Error authentication rejected aaa failure"
Running Config
: Saved
ASA Version 9.1(3)
hostname NazcoFW
domain-name default.domain.invalid
enable password XgEKS9WizHnI9IUJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd XgEKS9WizHnI9IUJ encrypted
names
interface Ethernet0/0
switchport access vlan 22
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 12
interface Ethernet0/3
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 32
shutdown
interface Vlan1
nameif NAZCO
security-level 100
ddns update hostname OSI
dhcp client update dns server both
ip address 172.16.200.1 255.255.255.0
interface Vlan12
nameif outside4
security-level 0
ip address 172.16.4.254 255.255.255.0
interface Vlan22
nameif Outside20
security-level 0
ip address 172.16.20.254 255.255.255.0
boot system disk0:/asa913-k8.bin
ftp mode passive
dns domain-lookup NAZCO
dns server-group DefaultDNS
name-server 10.1.1.1
name-server 10.1.2.1
domain-name default.domain.invalid
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network HP5220
host 10.10.10.105
object network ak20
host 10.10.10.110
object network hp5520
host 192.168.2.105
object network HP7000
host 192.168.2.106
object network HP5520
host 192.168.2.105
object network ak04
host 10.10.10.110
object network HP400
host 192.168.2.107
object network out04
range 192.168.2.200 192.168.2.220
object network AK04
host 10.10.10.110
object network oooo
subnet 10.10.10.0 255.255.255.0
object network 444
host 10.10.10.110
object network OSITOINT
subnet 10.10.10.0 255.255.255.0
object-group network OSItoOUT04
network-object object out04
access-list outside20_access_in extended permit icmp any4 any4
pager lines 24
logging enable
logging asdm-buffer-size 512
logging trap informational
logging asdm informational
logging host NAZCO 10.10.10.10 17/6161
logging debug-trace
logging permit-hostdown
mtu NAZCO 1500
mtu Outside20 1500
mtu outside4 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-721.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (NAZCO,outside4) source dynamic any interface dns
nat (NAZCO,Outside20) source dynamic any interface dns
route Outside20 0.0.0.0 0.0.0.0 172.16.20.1 1
route outside4 0.0.0.0 0.0.0.0 172.16.4.1 11
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 NAZCO
snmp-server host NAZCO 10.10.10.196 community ***** version 2c
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity fru-insert
snmp-server enable traps remote-access session-threshold-exceeded
snmp-server enable traps connection-limit-reached
snmp-server enable traps cpu threshold rising
snmp-server enable traps ikev2 start stop
snmp-server enable traps nat packet-discard
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca trustpool policy
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh scopy enable
ssh 172.16.200.0 255.255.255.0 NAZCO
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access NAZCO
dhcp-client update dns server both
dhcpd dns
dhcpd update dns both
dhcpd address 172.16.200.20-172.16.200.89 NAZCO
dhcpd dns 172.16.20.1 172.16.4.1 interface NAZCO
dhcpd lease 1048575 interface NAZCO
dhcpd update dns both interface NAZCO
dhcpd enable NAZCO
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
username admin password bZmVDHuxUzzxS3yz encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect icmp error
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
service call-home
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:357b7c6f861e8aa9bb3a3674a789b39b
: end
asdm image disk0:/asdm-721.bin
no asdm history enable

Hi
Looks like the AAA configuration is set for local
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
Change it to Radius
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
for example :
aaa authentication telnet console Keefa-Raduis LOCAL
Now when you will do telnet to using Radius credentials, Its Should work, If radius goes down you can use LOCAL username and password as fallback method.
Cheers!
Minakshi(Do rate the helpful post)

Enabling network discovery on Windows Server 2012 R2

Good afternoon.
As per the title, I have set-up a new server at work. The server is running no problem but none of the other computers connected to the network can 'see' the new server. I've gone into the control panel and tried to turn on the network discovery, but it just
defaults back to 'off'.
I did so a search on here first before troubling anyone and I did find this answer :
Thanks for the post.
I did some research and found this issue may occur if the dependency services are disabled. Please make sure the following services are enabled and running.
- SSDP Discovery
- UPnP Device Host
Disabling Network Discovery/Network Resources"
That may well be the answer, but unfortunately that means absolutely nothing to me.
Is someone able to help me try and switch this on, but by offering an explanation an 'idiot' would understand.
Thanks in advance.

Hi,
This issue occurs for one of the following reasons:
•The dependency services for Network Discovery are not running.
•The Windows firewall or other firewalls do not allow Network Discovery.
To resolve the issue, follow these steps:
1.Make sure that the following dependency services are started:
DNS Client
Function Discovery Resource Publication
SSDP Discovery
UPnP Device Host
2.Configure the Windows firewall to allow Network Discovery. To do this, follow these steps:
Open Control Panel, click System and Security, and then click Windows Firewall.
In the left pane, click Allow an app or feature through Windows Firewall if you are running Windows Server 2012. Or, click Allow a program or feature through Windows Firewall if you are running Windows Server 2008 or Windows Server 2008 R2.
Click Change settings. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Select Network discovery, and then click OK.
3.Configure other firewalls in the network to allow Network Discovery.
4.Turn on Network Discovery in Network and Sharing Center
Quote from http://support.microsoft.com/kb/2722035
Steven Lee
TechNet Community Support

Change bytes per sector windows server 2012

Similar Messages

Maybe you are looking for