Change cell color if number is different from previous cell

Hello all and thank you in advance for any help that is provided.
I want to have the color of text in one cell change if the number entered into that cell is higher than the number entered in the previous cell.
Example: If cell A=18 and cell B=18 then the font color in both cells is the same.
If cell A=18 and cell B=20 then the color of the font in cell B should change to another color.
I have done my best to look through the posted questions to no avail so I apologize if this has already been answered.
AJ

Inspector > Format (42)
Select B2 > Conditional format > Greater than > A2 > Edit > Text > Red, Green whatever. Done.
As usual the format in B2 can be dragged down by the little o bottom right to B3, B4 etc.
S.

Similar Messages

How can I change game centre and iCloud account information from previous owner of my iPad?

How can I change game centre and iCloud account information from previous owner to me?

You can't do it on your own. The previous owner has to erase the device for you. You would need his Apple ID and password in order to delete his iCloud account. This is due to the Activation Lock in iOS 7 - assuming that your iPad is running iOS 7.
Contact the owner and ask home to erase it remotely using iCloud, or return the device and ask for your money back. If you can't contact the pervious owner, you will have a useless iPad on your hands.
Read this for more information. This is what you need the previous owner to do.
What to do before selling or giving away your iPhone, iPad, or iPod ...

Why idoc number is different from sending to target?

The number of the same idoc is different from source system and target system...do you know why?
what's it the procedure to calculate the new number?

Hi Sleep,
The Idoc number is specific to the system . It is unique inside a system.
For example, the sales Order for a vendor will become a Purchase order for the company. Also, the Idocs are not always sent by SAP systems, non sap systems can send IDOCS as well, so to avaoid confusion, SAP generates a uniques number everytime it recieves a IDOC.
Regards,
Ravi

Change background color of a table based on table cell values quickly.

Is there a more effecient way to change the background color of a table based on the cell values of the table?
I can do this cell-by-cell using the property node, but it is very slow. It helps a little by deferring panel update, but it is still slow. Is there a better way?
Thanks.
Ian

If you want to color each cell according to the value, you need to do it one cell at a time and the above answers don't apply.
You can dramatically speed up things by defering front panel updates for the duration of the operation.
(sample code can be seen in the top picture here)
EDIT: I noticed you tried this already. Can you show us your code?
How many cells need to be colored on average? If there are not that many, first write the background color using -2,-2, the only write the few cells to be colored, skipping the rest.
How big is the table? If it is much bigger than the table indicator, all you need is to color the visible parts whenever the data or the scroll position changes.
LabVIEW Champion . Do more with less code and in less time .

How do I change the color of the desktop fonts from white to black?

How do I change the color of the fonts on the desktop to black?

You can reverse the colors of everything on the screen with one click in this Perference pane:

SSRS Reporting : Fill Cell Color according to the Location of the Cell in the Matrix

Hello,
I am trying to achieve below result in the SSRS but facing issues with Cell color Fill Expression when Detail value is NULL.
If you look at the image, it should show exact same colors of the cell irrespective of the values.
But in my case it is not showing color for NULL value cells.
Below is the expression which I have put in the Fill Expression window.
SWITCH(
Fields!Columns.Value = "Col1" And Fields!Rows.Value = "Row1","Yellow",
Fields!Columns.Value = "Col1" And Fields!Rows.Value = "Row2","Green",
Fields!Columns.Value = "Col1" And Fields!Rows.Value = "Row3","Green",
Fields!Columns.Value = "Col1" And Fields!Rows.Value = "Row4","Green",
Fields!Columns.Value = "Col2" And Fields!Rows.Value = "Row1","Red",
Fields!Columns.Value = "Col2" And Fields!Rows.Value = "Row2","Yellow",
Fields!Columns.Value = "Col2" And Fields!Rows.Value = "Row3","Yellow",
Fields!Columns.Value = "Col2" And Fields!Rows.Value = "Row4","Green",
Fields!Columns.Value = "Col3" And Fields!Rows.Value = "Row1","Red",
Fields!Columns.Value = "Col3" And Fields!Rows.Value = "Row2","Red",
Fields!Columns.Value = "Col3" And Fields!Rows.Value = "Row3","Yellow",
Fields!Columns.Value = "Col3" And Fields!Rows.Value = "Row4","Green"
Please suggest me to get the colors for the NULL value cells.
I tried with IsNothing() but then it is doing the same color of all NULL cells. I want them exactly same in the figure.
Thank you,
Mittal.

Hi Mittal,
Based on your dataset table, the matrix should displays as below. Are you manually insert Row1 row and Col3 column in the matrix?
If that is true, the Fill cell color should be displayed as the picture above. Because there are no values for Rows=Row1 and Columns= Col1, Rows=Row1 and Columns= Col2… the expression for those cells has no effect. To achieve your requirement, we can manually
insert those values in the dataset query like below:
SELECT Columns, Rows, Value FROM table
UNION all
select 'Col1' AS Columns, 'Row1' AS Rows, NULL AS Value
UNION all
select 'Col1' AS Columns, 'Row3' AS Rows, NULL AS Value
UNION all
select 'Col2' AS Columns, 'Row1' AS Rows, NULL AS Value
UNION all
select 'Col2' AS Columns, 'Row4' AS Rows, NULL AS Value
UNION all
select 'Col3' AS Columns, 'Row1' AS Rows, NULL AS Value
UNION all
select 'Col3' AS Columns, 'Row2' AS Rows, NULL AS Value
UNION all
select 'Col3' AS Columns, 'Row3' AS Rows, NULL AS Value
UNION all
select 'Col3' AS Columns, 'Row4' AS Rows, NULL AS Value
Then directly add those three field with the fill cell color expression to matrix, the matrix displays:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Newbie here, how do I change the color of my title gradually from white to sudden bloody red

hi all, nice to be part of this forum. Ive read your questions and answers for the last week, and loved how helpful you guys and gals are.
Im trying to make a scary video with a scary intro title that goes from peaceful relaxing white to SCARY RED!!!! (the text says something in white, and then in red "you've been warned!") I've used premier for the last two weeks but still got so much, so, very much to learn. how can this be accomplished? it must be pretty easy and obvious for you but it isnt for me. if possible besides the change in text color from white to red Id also like to make it bloody, with you know, the letters with those bloody traces/drops.
Example: http://4.bp.blogspot.com/_DMT9SbnvRzo/TLapZwa4aYI/AAAAAAAAFHw/DeW_XYJ219Q/s400/bloody+titl e.png
cheers

Your best bet to recreate something like that is to find a scary font on http://www.1001freefonts.com/ or sites like it.
Check under Horror fonts and look at "Blood Gutter 2000" or maybe "Liquidism".
Then just type the text into the Premiere Pro titler windows and make sure that the fill color is red with no strokes. You might want to darken it more than 255,0,0 since that might be good for spurting blood, but dripping blood is usually darker. And I can't believe I even typed that just now.
If you are talented, you can start with that font in Photoshop and then modify it by adding layers with specular highlights.
Edit: Oh, to change color just put the white one on top of the red one and dissolve between the two. Perhaps with a blur in and out to deal with the different shapes of the fonts.

Display Color Management Simulated Rec709 differs from ProRes Output

Okay. I've read the Adobe white paper on proper Color Management workflow about a dozen times now, and I'm still getting some inconsistencies in my render outputs.
DPX footage assigned a Kodak 5218/7218 Profile
Project Settings: ProPhoto RGB
Linearized Working Space
Match Legacy AE QT Gamma Adjustments
Output Profile: HDTV (Rec. 709)
I'm outputting to a ProRes 4444 file.
My problem arises from using the Simulate Output>Rec709 option in AE. I cannot get the output to look like this simulated color. Isn't that supposed to work?
I can match the output to AE when I turn off Color Management and apply a Color Profile Converter effect, but there is a shift in color when viewing Simulated Color vs. using the Color Converter Effect. Even in AE the Converter Effect looks different than Simulated Color.
I was under the impression that the point of the Simulated Output and Display Color Management options were to avoid having to do this. Should I change my workflow and just use the Converter Effect on all my comps? Or do I have a setting wrong somewhere? Has anyone else come across a discrepancy like this?

Interesting. I thought it might have something to do with ProRes, but my bit depth is at 32, and the shifts I'm seeing are more subdued than the pictures in that post. It looks darker (like a gamma shift) and slightly more saturated.
I'm more interested to know why there is a difference in the simulated output vs the color profile converter. I can see the difference within AE, before exporting anything. What is simulated output doing that my profile converter isn't?

Changing IP address in Solaris 10 different from Sol 9?

I recently needed to change the IP address of 2 new Solaris 10 Sparc boxes. I made the normal changes
/etc/hosts
/etc/hostname.bge0
/etc/resolv.conf
/etc/netmasks
/etc/nodename &
/etc/defaultrouter
(why can't we get these into one file?)
But when rebooted, the server still remembered its old IP address and settings even though I couldn't grep that IP anywhere. I eventually had to do a sys-unconfig which I was hoping to avoid. Is there some other way to change an IP in solaris 10?

Here's the step that I use whenever I'm stuck and it usually works. As I'm still learning now, these may be easy steps and you may have been already done these.
"Static to DHCP IP Address"
First unplumb
# ifconfig e1000g0 unplumb
Then Plumb (probably IP will become like 0.0.0.0)
# ifconfig e1000g0 plumb
Use dhcp
# ifconfig e1000g0 dhcp primary
Check on IP address
Should have an IP address from your dhcp server by now.
# ifconfig -a
and
# ifconfig e1000g0 dhcp status
"Configure DNS client"
Edit "nsswitch.conf" file
go to /etc
# more /etc/nsswitch.conf
# vi /etc/nsswitch.conf
and add "dns" on hosts
hosts: files dns
go to /etc and see if the file is already there or not
# more /etc/resolv.conf
If it's not created yet, then create one.
# vi /etc/resolv.conf
domain domain.com
nameserver 0.0.0.1
search domain.com
Then ping should work with both ip address and domain name.
For Manual IP
First unplumb
# ifconfig e1000g0 unplumb
Then assign an IP and make sure that you are using the right IP address if you are in the network.
#ifconfig e1000g0 plumb 192.168.100.10 netmask 255.255.255.0 up
Check if it's updated
#ifconfig -a
If you still can't get the right ip address, then something is up. Oh, make sure that your Ethernet cable is connected or not defective. It happened to me once.
Hope this would help someone.

How do i change the color of an entire page from white to black?

how do i change an entire page from white to black?
thanks

If you want all your pages to have a black background, make that background object a Section Master object too.
Format > Advanced > Move Object to Section Master.
Jerry

Is there any possible way that I could change the color of my iPhone 5 from black to white?

I've had my iPhone 5 for a while, now and I am not satisfied with the black color, so I've been searching and searchinng for ages and cannot find a solution?

Nothing you can do with Apple. Only choice is to sell current phone, purchase new one in color you are looking for.

Why did firefox change yahoo home page. Now different from IE

For some reason the Yahoo home page which I always use has been changed on Firefox. On IE it is the good old home page that I not only like but was used to. I prefer Firefox as my browser but would like the regular Yahoo home page back. Any ideas?

I have the same problem too. I had the same problem about two months ago and someone on here told me what to do. Unfortunately I did not write it down so i don't remember. I've tried, tools-options - advance - general - unchecked use hardware acceleration when available...it did not work. Yahoo main page looks perfect on IE, on Firefox it's a mess. Someone please help.

Colors In Exported Video Different From Preview In Premiere

I have a short video I put together in Premiere that contains some image overlays I created in Photoshop. Everything looks fine in Premiere, but when I export it, the overall video has a warmer, yellow-ish/orange-ish color cast to it. My Sequence settings are HDV 720P and I am exporting the video as Windows Media HD720P. Is there anything simple I can do to get the colors to match up properly? I'm only intending to publish the video to Youtube.

Interesting, you're right, I opened it in VLC and the colors look fine. Strange that I'm getting an odd color cast in Windows Media Player only - thanks everyone!

Can i automatically put a value in a cell based on the text in the previous cell. Cell D is a pop-up menu of five products i use. Each product has a different numeric value which will appear in cell e based on which product is chosen in cell d

I would like product cost to automatcally be entered Based on what product is selected from pop-up menu in product column
Feild
Feild Operation
Date
Product
Product Cost
Rate
Rate Type
Acres
27 Feild 1N
Seeding
1/1/12
RT 540
L/ac

Hi Neil,
This is usually done with one of the Lookup functions, such as VLOOKUP:
The basic formula is: =VLOOKUP(D,'Table 1-1' :: $A:$B,2,FALSE)
To keep the cells in the bottom five rows 'empty' until an entry is made in column D, the basic formula is placed in an IF statement: =IF(LEN(D)>0,VLOOKUP(D,'Table 1-1' :: $A:$B,2,FALSE),"")
And to catch errors in data entry (such as the one in row 5), that formula is enclosed in an IFERROR statement:
E2: =IFERROR(IF(LEN(D)>0,VLOOKUP(D,Price list :: $A:$B,2,FALSE),""),"Not found")
The last is the formula used in the table above. Enter in E2, then Fill down the rest of the column.
Regards,
Barry

SCXI-1162HV Input Sensitivity different from previous modules

I have a number of SCXI-1162HV modules in a chassis, purchased approx. 3.5 years ago. My nre SCXI-1162HV modules only require a fraction of the current required by the originals to indicate a '1'.
Is this important ? We are looking at 2uA to a previous 30uA. Many thanks, Steve Booth

Steve,
It is not the current that causes the SCXI-1162HV to register a "1", it is the voltage level. As long as the voltage is above 2V DC it will register a "1". I have attached the specs concerning the voltage levels below.
You should not be concerned as long as the module is working correctly in relation to the input voltage levels.
Attachments:
SCXI-1162HV_Specs.JPG ‏34 KB

Change cell color if number is different from previous cell

Similar Messages

Maybe you are looking for