Change column width in report

After creating a report using table 'dept', I have updated that dept table and increased the width of the column dname from 14 to 20. I would like to know how to change the width of the dname column in the report that I created earlier so that it can now show 20 characters. Thanks.

fsidrak wrote:
I am working on report builder 6i reports. I want to increase the width of a column X in a report in runtime depends on the
value of a certain column Y in the same report.Hi fady,
Try to accomplish this by setting Horizontal Elasticity properties.
Hope this helps
Hamid
If someone's response is helpful or correct, please mark it accordingly.*

Similar Messages

How to controll column width in report ?

Dear All,
i have created Classic Report but here Column width is too large.
i want to controll column width in report .
How can i do this..
Thanks

Hi Vedant,
There are two possibilities in your case.
1.width of your column heading is too large.
include break in your column heading
for ex .. column heading is employee department number then write it as *[Employee(br)Department(br)Number]* // replace ( with < and ) with > in br
2) Value is too large
Go to Report Attributes->edit your column->column formatting->css style
In CSS style put this display:block;width:100px;white-space:wrap
Hope this will helps you,
Thanks,
Jitendra

The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.

The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.
All was normal until the icon for the disk stopped showing up on the desktop when I would plug it in. I rebooted the computer, and the disk icon now shows up but this new look to the finder window started as a result. The hard disk does not have this problem when I use it on another Mac running Snow leopard. Also, two other external hard disks that I use on this computer running lion 7.4 still have the normal header bars with columns that can be reordered, etc.
I have tried looking in preferences and other places but have not seen this discussed.

Well duh - I finally figured out that somehow in the View options for the hard drive, the "arrange by" option had been changed to "by date" from "none". Not sure how that happened, I had never used the "view options" menu tem before. Changing "arrange by" back to "none" gets the gray column headers and the collapsible folder icons back.

Change column width

How do you change column width in Numbers on an iPad?

In numbers, open the sheet you want to work on. Tap the grey bar across the top., over the column you want to make bigger. The colum should now be surrounded by a blue box. At the top,right of the blue box you will see ". Touch it and slide to make the column wider or narrower.

[kde - Homerun kicker] How change columns width

I found a new Kde launcher a few months ago, I find great (of course this is only my opinion).
It is the smaller version (not full screen) Homerun , which is available in Aur at the following address : https://aur.archlinux.org/packages/kdep … s-homerun/ , which can be seen in the following link : http://blogs.kde.org/2014/01/29/homerun-120 , although the current version is slightly advanced.
This launcher version not full screen, works like Lancelot , but is more simply and more faster.
Moreover, it displays the recently used applications and the recently used documents .
However, I have a slight regret about this launcher : the column width is fixed and can not be changed.
Does anyone know how to change the columns width ?
Thank you in advance for your help.
Last edited by Pafrapé (2014-05-02 21:37:58)

@Julie – you can change column width by alt + shift + dragging left or right cell sides without changing the overall size of the table.
For other table goodies see:
http://indesignsecrets.com/18-handy-table-shortcuts.php
Hope that helps!
Uwe

Change column width for print table to report

Hi, want to make the first column in my table to be printed to report wider than the rest, for it contains the part numbers of about 16 chars and the other columns are the data of 4 each. Don't want to make all equally wide for I want to fit as many column as possible over the page. How can I do this?? Thanks for any help. Is there maybe another way to print in a table format?? Madri

Hi Madri,
Assuming you are using the Standard Report type with the Report Generation VIs, you can check out this KnowledgeBase entry that discusses how to customize the VI to generate a report with different column widths:
http://digital.ni.com/public.nsf/websearch/7AEC2CC2618D47DF86256D280058BDA5
Hope this helps,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Unable to change column width dynamically in cross tab report.

Hi,
We have developed cross tab layout using template builder v.10.1.3.2.1 in EBS.I am trying to increase column width dynamically and the width is coming xml.
i looked at document and found one command <?split-column-width:name?> for the same.i tried but it is not increasing the size of one column.
Output
column1 column2 column3 .......
Row text1 10 20 30
Row text2 40 50 60
I want to inrease the size of column for row text1 and row text2.
Need help in this.
Thanks,
Mahesh

Is the field that holds your width value called "name"?
Can you send me the xml and RTF template to [email protected] and I can take a look.
Thanks,
Bipuser

ALV Cannot change Column Width in Field Catalog

Hi,
I have an ALV report where I want to specifically set the field widths of the columns because some of the standard domain lengths are very large (e.g. 255 chars).
I am building the field catalog like this:
CLEAR gs_fieldcat.
gs_fieldcat-col_pos      = 1.
gs_fieldcat-fieldname    = 'NAME_ORG1'.
gs_fieldcat-scrtext_m    = 'Employer Name'.
gs_fieldcat-dd_outlen = 40.
APPEND gs_fieldcat TO gt_fieldcat.
then calling the ALV like this:
CALL METHOD go_alv->set_table_for_first_display
    CHANGING
      it_outtab                     = gt_evm_pm_data
      it_fieldcatalog               = gt_fieldcat .
gt_fieldcat is based on structure LVC_S_FCAT.
However, this has no effect on the column widths.
What am I doing wrong?
Regards
David

Hi,
please try with that.
It will surely work.
gs_fieldcat-outputlen = '25'.
In quotation u can use any length whateveer u wish to display
Thanks
JAyati

How to resize column width in report?

hi all,
i read somewhere here that in order to resize column width in a report, you need to go to report attributes, then edit the column you wish to resize and then go to the CSS Style and place something like "width=600px". while this works very well in Internet Explorer, it somehow has no effect in Firefox 3.0. is there a way to make it work both browsers?
thanks
allen

Hi,
Sorry, I misunderstood. There are several methods you could use:
1 - Use the span tags around the data itself - this would require adding the tags into the sql statement itself
2 - Use javascript to set the column widths by adding a style to the TD tags for each cell
3 - Create a new Report Template and use COL tags immediately after the TABLE tag in the Before Rows section to specify the widths of all columns
Option 3 may be the easiest?
Andy

Can't change column width

Hi
I'm working on an existing site (and learning as I go). I was
just trying to get some boxes to line up in the navigation bar and
pulled it too wide to see if my adjustements were appearing in the
browser. Now I can't change it back to the proper size. I've tried
changing it in the HTML, the properties, the CSS, by manually
pulling on the box handle (it lets me go wider, but not narrower)
and it always reverts back to the wide size.
You can see from the screen shot that the proper width is
showing, but the actual column width is in parenthesis. This is the
width that I can't seem to get rid of. OK, never mind about the
screen shot - I can't post one here, crap.
This is what the column width looks like 147 (196). I cannot
get rid of the 196 and when I pull the image narrower, all my code
bounces back to 196 even though I've changed it to 147.
I've attached the code, but I don't see what anyone can do -
code says 147 - column width remains 196. Please help me change it!
Also, I just saw the posting that appeared right before me on
the same topic. My site is not live yet so I'm sorry that you can't
look directly at the source - the old site is www.breadandlife.org
if that helps - at least it's showing the correct navbar width.
And padding is not the problem, already looked at that.
Just looked at the existing site in Dreamweaver and the
navbar is also stretching out to 196! Did I do something to change
defaults in the navbar that is applying to all files I open? I'm
going to close it and make sure I don't save it...
I hope this will be a quick and easy answer for someone...

can you try edit view--> view properties --> Text and Align tab--> select field you want to change --> check width and give number of pixels.
HTH,
Suma

Controlling Column Width in Report Region

I have a report region based on a simple select statement. I'd like the table to be the full width of the region and I'd like the columns to be spaced evenly so that they are also the full width of the region. I have figured out how to set the table width via Report Attributes Substitution, but I am unable to set the column width. Any help would be greatly appreciated.
Mark

Hi take a look into this post:
Translated in English:
http://translate.google.de/translate?sl=de&tl=en&js=n&prev=_t&hl=de&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwww.apex-at-work.com%2F2010%2F08%2Fsilbentrennung-hyphenation-in-apex-ger.html
Code must be extracted from Original post:
http://www.apex-at-work.com/2010/08/silbentrennung-hyphenation-in-apex-ger.html
This could be also interesting for your:
http://www.apex-at-work.com/2010/03/automatic-linebreak-if-word-breaks-out.html
Tobias
http://apex-at-work.com

Cannot change column width

Hi, when my 3rd gen nano is connected and iTunes is open and I am in my nano library, I cannot change the column width.
When I try to change the column width in the iTunes library it's no problem, but once in the nano library I cannot.
What gives ?
Mike.

Uncheck *Manually manage music*, click Apply then again check *Manually manage music*.
I don't like auto sync.
Any reason in particular?
You can create specific playlists and autosync only those.
Add/delete form these playist to add/remove form theiPod.
Using autosync is the only way all the info (ratings, playcounts, date played, etc) will get transferred back to iunes.

Changing column width in CATS

Hi all,
Is it possible to change cell widths with varying values in CAT2 screen?
For eg: Project/Task Name column width should be 25 while the cell width for weekdays should be 8 to 10.
Regards,
Vivek

You can Change the Fields as required Hide them etc not change the Length
This means you wann to change Tabble : CATSDB WAHICH IS STANDARD
REWARD POINTS

How do you keep Finder from changing column widths?

I don't know if this bugs anyone else, but I absolutely HATE it that Finder automatically adjusts the column widths. It jerks content around and makes it where it drives you nuts. You think you can see two columns, until you click on an entry and suddenly it jerks the width out of proportion to where you can see either column.
This isn't a matter of it adjusting to the widest file name length either, because it seems to "remember" that there used to be a long file name there. If you change the length, it STILL makes it very wide.
I've long said that Finder is perhaps the absolutely WORST daily app that Apple has. Nobody addresses it and nobody seems to want to make it better. Are there any alternatives to this piece of crap? Or is there some hidden way that you can tell Finder to QUIT adjusting column size?
Thanks!

I've come across the same problem in Mavericks (v 10.9). Oddly enought, I didn't notice that problem with Mountain Lion (10.8.5). I'm wondering if this is caused by a corrupted Library file. I've contacted Apple Tech Support and spoke with two (2) support agents, one with an advanced title for almost an hour. Unfortunately, the advanced Tech Support agent could only acknowledge the problem, had no solutions and suggested I contact Applev via Support feedback.
If you've upgraded to Mavericks, have you noticed the same problem?
Any insight or assistance would be appreciated.

ALV List - Field Catalog - Change Column width

Hi Friends,
I am using Alv list to display the output of a report program. I have generated the field catalog using REUSE_ALV_FIELDCATALOG_MERGE function and to display the alv REUSE_ALV_LIST_DISPLAY.
My Internal table has few fields like "text1 type string". So after generating the Fieldcatalog from internal table i have changed the field description, but i don't know how to change the column output display width. I have tried by changing OUTPUTLEN parameter to 50 but in the output it is taking only 10 characters instead of 50 characters.
How can i change the field length(FOR STRING TYPE) for output display ??
Which parameter do i need to change in field catalog for String type fields..
Regards,
Raju.
Message was edited by: Narayana Raju Sampathirao

Hi narayana,
1. the STRING type is causing the problem.
2. what u can do is,
(i suppose u are modifying the alv field catalogue)
   One workaround is :
   and it works fantastic !
3. BOLD is important.
    (this will take care of the length)
LOOP AT alvfc INTO alvwa.
IF alvwa-fieldname = 'A'.
    alvwa-outputlen = '100'.
<b>    alvwa-inttype = 'CHAR'.</b>
    MODIFY alvfc FROM alvwa.
ENDIF.
ENDLOOP.
4. To get a TASTE of what i m saying,
   just copy paste in new program :
REPORT abc.
TYPE-POOLS : slis.
Data
DATA : BEGIN OF itab OCCURS 0,
       a TYPE string.
        INCLUDE STRUCTURE t001.
DATA : END OF itab.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : alvwa TYPE slis_fieldcat_alv.
Select
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT itab.
itab-a = 'pppppppppppppppppppppp'.
MODIFY itab.
ENDLOOP.
*------- Field Catalogue
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
    i_program_name         = sy-repid
    i_internal_tabname     = 'ITAB'
    i_inclname             = sy-repid
CHANGING
    ct_fieldcat            = alvfc
EXCEPTIONS
    inconsistent_interface = 1
    program_error          = 2
    OTHERS                 = 3.
LOOP AT alvfc INTO alvwa.
IF alvwa-fieldname = 'A'.
    alvwa-outputlen = '100'.
    alvwa-inttype = 'CHAR'.
    MODIFY alvfc FROM alvwa.
ENDIF.
ENDLOOP.
Display
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
    it_fieldcat             = alvfc
TABLES
    t_outtab                = itab
EXCEPTIONS
    program_error           = 1
    OTHERS                  = 2.
regards,
amit m.

Change column width in report

Similar Messages

Maybe you are looking for