Change connection object ISU_S_CONNOBJ_CHANGE how does it work? ES 56 Trans

Hi ,
I am trying to change connection object details and using the ISU_S_CONNOBJ_CHANGE function module
it is not updating the values .Kindly suggest!!!!1
Thanks,
Pradeep.

Hi,
Please call function module ISU_S_CONNOBJ_PROVIDE to populate Y_OBJ and Y_AUTO.
You would first need to populate the fields which need to be updated in X_AUTO fields and have the OK CODE as 'SAVE'. Then update Y_OBJ parameters as per requirement and pass the values to function module ISU_S_CONNOBJ_CHANGE.
Alternatively, I suggest to use Master Data Template. Please visit Master Data Template in ISU for more details.
You can use Master Data Category CONNOBJ for creating Master Data Template. (Transaction code to access it is EPRODCUST). After creation, test your Master Data Template. Then you need to call ISU_PRODUCT_IMPLEMENT with your template.
Please let me know if this was useful.
Regards,
Avinash

Similar Messages

  • Exchange Object Linkage - How does it work?

    Hi,
    I have a question regarding the following Standard Work Manager Delta Update behavior:
    A Work Order in the Work Manager is updated, when the description of the Work Order has been changed in SAP.
    However, a Work Order is not updated, when the description of the Functional Location of the Work Order has been changed in SAP.
    I did some reading and I found something called "Exchange Object Linkage Settings" that sounds like it should be used for the use case above. The problem is, that it does not seem to work as I would expect.
    Here is some description from the smp_agentry_sap_framework.pdf, page 78:
    Exchange Object - Linkage Settings The Linkage Settings tab allows the exchange objects that are linked together to communicate with each other. The communication is one-directional, with the exchange object sending information to the object(s) listed in the Linked Exchange Objects List. When there is a value change to the exchange object, that value change information is passed on to the linked exchange objects. The linked exchange objects then go through additional processes related to the value change.
    In the Config Panel, one can see that in the Standard Work Manager, there is a linkage between Functional Location and Workorder:
    According to the above description, I would expect that, when changing the Functional Locations description, that information is passed to all Workorders with that Functional Location.
    BUT HOW? It is not entirely clear to me how and what information is passed where. I would expect, that in the end, all related entries in the workorder exchange table will be updated with a new time stamp. (How else could the client get the information that the workorder is to be updated?)
    This is not what I can see! When changing the Functional Locations description in SAP, I see that the Functional Locations exchange table entry is updated, but the corresponding Work Orders exchange table entry is not changed.
    Does anybody have an idea how this feature is supposed to work? Maybe, there are some configuration steps necessary? Any input on the would be highly appreciated.
    Regards, Daniel
    This question came up in another discussion, I hope it will get a better visibility and hopefully some helpful answers in this seperate discussion.

    Hi Daniel,
       The high level process steps are as follows :
    Process main exchange object, in this case Functional Location, update exchange table with time-stamp.
    Check for linked Exchange Objects, in this case there is one object "SWM60_WORK_ORDER"
    Process linked exchange object 'SWM60_WORK_ORDER' using Synchronous Linkage process
    Identify all the Work Orders which is associated with above Functional Location
    Process each Work order by satisfying all filters from the Work Order Exchange Object
    Update Work Order Exchange table with the proper time-stamp
    Hope this will help.
    Regards
    Syam

  • Menu Object; MANUAL option. What is this, and how does it work?

    What is this... and, how does it work? Can't find documentation on this.

    My knee-jerk reaction is, "are f'n kidding me?"... but, of course, you're not.
    I must say, that is an incredibly useless option. How would that 'option" differ from simply making a text object (or text/rectangle/image combo or group) and creating a link?
    What got me looking at this option was the hope to find some way to insert a dynamic "field" that could be used on a master page to display the current page title (of a page based on that master). Something similar to Word (and other applications) that you can enter information into a document property and then insert that information anywhere within the document by using a field code for that info. I don't know if there is an HTML code that could be used to accomplish this, in this case. Something that would refer to the page title.
    Thanks for the info none-the-less.

  • Referenced objects : how does it work ?

    Hello
    I would like to design a table, with 2 rows.
    Within the first row, a combo modifies the content of the second colum regarding its value.
    I believe I should use referenced objects (under the Referenced Objects nod in hierarchie tab), because "A referenced object is an object that is added to a form only when it is required", but I do not understand how it works.
    I've added a subform to the tree "referenced objects" ; using javascript let me access this subform, but when previewing the code does not work
    would anybody point me a link/a doc out ?
    thanks a lot !

    You gotta throw use a bone here... How does what work? More info please.

  • How can I get my iPhone to show up on the panel to the right iTunes? I keep connecting it but it does not work.

    How can I get my iPhone to show up on the panel to the right iTunes? I keep connecting it but it does not work.

    http://support.apple.com/kb/TS1538

  • I get wireless connection but my internet does not work on my ipad 2

    I get wireless connection but my internet does not work on my ipad 2

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • What is efax and how does it work?

    Hi!
    eFax® is a service provided by eFax®, not Hewlett-Packard, that allows you to send and receive faxes using the Internet rather than a phone line. eFax® is easy to use, but it is different than a typical phone-based fax machine. You don't require a phone line to use it, so you don't have to worry about busy signals and you can place your printer where you want it, not where the phone jacks are located! The fax number you are provided will not typically be a local number, and may even be in a different country. You will receive 20 incoming and 20 outgoing fax pages per month for free with this service. Your page counts will reset at midnight Pacific Time on the first of each month. You can also subscribe to eFax® Plus to obtain additional pages per month by visiting: http://www.eFax.com/products/internet-fax.
    How does it work?
    eFax® uses the printer Internet connection to send and receive faxes. When you send a fax, it is sent over the Internet to the eFax® server and then eFax® sends your fax to the recipient's fax machine over a standard phone line.
    Your faxes are received in a similar manner, but the order is reversed. The sender sends the fax over a phone line to eFax® and then eFax® sends the fax to your printer using HP's ePrint service.
    This question was solved.
    View Solution.

    Hi Im_cheesecake,
    Great information, if you don't mind I just wanted to piggy back off of your post, to clear any potential confusion.
    The 20 free incoming & 20 free outgoing faxes are with HP printer's that include the eFax service print app.  As of now, we have three printer series' that include the pre-installed eFax print app: HP Photosmart 7510 Series, HP Envy 110 Series, and the HP Photosmart eStation C510a.  
    eFax also has a free plan which allows you to receive a limited number of faxes but does not allow you to send any faxes. If you exceed the number of received faxes allowed, eFax will prompt you to upgrade to a paying account. Here are the main details of the free plan:
    One remote (i.e. non-local) eFax number
    Area code/prefix is selected by eFax and cannot be changed (unless you upgrade to a paid account)
    20 incoming fax pages per month (receive-only)
    You are prompted to upgrade to a paying account if you exceed 20 incoming pages, or if you need send capability.
    Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
    I am an HP employee.

  • JDBC Adapter:- How does it work??

    Dear Friends,
    I would like to know the nuts and bolts of JDBC adapter.
    1.)How does it work internally?Internally what does sap use?
    2.)In my scenario i just need to access a sap table so Can i write my Java JDBC program to access it.?
    3.)Is there any other way to sent data from Idocs to map to a external database with out using XI.?
    thx,
    jeevan

    Hi Jeevan,
    As far as the JDBC adapter goes, internally it uses, obviously JDBC (Java DataBase Connectivity). Thus all the calls from this adapter are internally SQL Queries (Either Select, Insert, Update, Delete, Execute Stored Procedure) that are sent using Java JDBC API.
    In Sender Configuration, it needs a Select and an Update query to be configured into it. It polls the External Database at specific intervals (Polling Interval in the Channel Configuration),i.e., it connects to the Database via a JDBC Connection and runs the select query. The data from the query is sent to XI as an XML Document. The update query is used to update the DB such that the same data is not picked again in the next poll. This is generally done through a status field. The select query's Where clause should pick records with one status and the update should change all those statuses so that the select does not pick them again. Click [Here|http://help.sap.com/saphelp_nw70/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm|SAP Help on JDBC Sender Adapter] for more details, including the format of the XML file sent.
    In receiver configuration, the channels creates SQL statements from the XML Document it receives. This can be either Select, Insert, Update, Delete or Stored Procedure Call Statements. This requires you to give the receiver channel an XML Document in a pre-defined Schema. Click [Here|http://help.sap.com/saphelp_nw70/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm|SAP Help on JDBC Receiver Adapter] for more details including correct XML Schemas. Note that the kind of SQL Statement generated (Select, Update, etc) is dependent on the schema provided.
    Hope this was helpful!!!
    Thanks,
    Guru

  • af:statusIndicator how does it work?

    <af:statusIndicator> how does it work?
    i want, call a function javascript when <af:statusIndicator> changed icon from ""reconnecting"" to "connected".
    where do javascript functions change icons?
    please help me
    Edited by: Mehdi Jalali on Dec 31, 2012 10:31 AM

    yes, i know.
    but i want add my js and update my style pagecontent after partial-refreshed (completed ajax)
    Edited by: Mehdi Jalali on Dec 31, 2012 11:01 AM

  • What is UMA exactly? How does it work?

    What is UMA exactly? How does it work?
    I have T Mobile but am not subscribed to Hotspots at Home.  I do pay for the BB unlimited internet package.
    When I am connected to my router at home, it goes to UMA.  But other times, it just says wifi and is still connected to my router -- but NO UMA.  I haven't made any changes.
    What is this?

    Here is a KB that discusses UMA:
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB11735&slic...
    Hope that helps!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How does this work?

    This is not a complaint, but a confused sigh of admiration. I've got an email account at the university where I teach. When I got my iBook, it took me a while, and a few conversations with IT at the school, to get this account working in the Mail application. (Since I have a Verizon DSL at home, I had to include that SMTP as the outgoing server.) Anyway, I synched this mail account (along with my AOL and .Mac accounts) onto the iPhone, and it works perfectly, both incoming and outgoing. I didn't have to change any of the settings. I thought I was computer savvy, but I can't wrap my mind around this. It seems like magic. How does it work?

    The sync process with iTunes transfers the email account settings (for your chosen accounts via your iPhone sync preferences) from the Mail application on your Mac to the iPhone's email application.
    The iPhone is running OS X and the iPhone's email client can be considered a mobile version of the Mail application.

  • My iPhone was stolen and I have contacted the police who are using the meid number to locate.  How does this work and what are my chances of getting the phone back?

    My iPhone was stolen.  I used Find My iPhone app to lock it and display a message.  The phone has not connected to the internet to locate it.  I contacted the police and they have taken my meid number.  How does this work and what are my chances of getting the phone back?  Are there other ways the theif can use it.  I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

    Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
    The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes.  If they do that, they'll probably keep him under surveilance for a year or so before they act.
    Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
    I'm sorry, but that's the way it is.

  • How does Remote work with Apple TV?

    How does Remote work with Apple TV?
    1. Does Remote, "Play" the music that resides on your iPod Touch>Apple TV>Home Speakers.
    OR
    Does Remote "Control" the music that resides on Apple TV HD>Home Speakers.
    (If so... say you have a iPod Touch that only holds 8GB's but your music collection on your Apple TV exceeds that amount.
    Will Remote still "Control" the larger music collection on Apple TV or your computer?)
    2. Will iPod Wifi work on a patio outside a home to control Apple TV inside the home?
    thank you in advance, Tom

    Remote is a way to control iTunes on either your computer or Apple TV using a WiFi connection. See this article for complete instructions.

  • Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
    If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
    Select the ipsw file and let it restore.
    If you dont have it downloaded then simply click on restore.
    I hope it works
    Cheers !

  • Corecell, how does it work?

    Hello!
    I'm being puzzled by Corecell features. MSI web pages tell me that Corecell has four different settings (Speedster, Buzz free etc.). I have installed Core Center (ver. 1.6.1.0) but there is no possibility to change into Buzz free mode.
    How can it be changed? I have found fan controls and auto-button but do I have to make settings by my self? Auto-button does not have any effect!
    Thanks in advance for your help!
    Niko
    system specs:
    Antec 380W True-Power
    MSI KT6 FISR
    AMD Athlon XP 2600+ Barton
    512Mb DDR400
    80Gb Samsung S-ATA HDD

    You gotta throw use a bone here... How does what work? More info please.

Maybe you are looking for