Change/Deactivate pin screen

I am getting an all white screen with the following text: CHANGE/DEACTIVATE PIN CHANGE PARENTAL CONTROL PINDEACTIVATE PARENTAL CONTROLCANCEL Whenever I select one option, the screen goes dark and I have to reset the entire process.

jrfinger wrote:
I am getting an all white screen with the following text:
CHANGE/DEACTIVATE PIN
CHANGE PARENTAL CONTROL PIN
DEACTIVATE PARENTAL CONTROL
CANCEL
Whenever I select one option, the screen goes dark and I have to reset the entire process.
Apologies for the issue and the experience that you described above. I have asked a colleague to review your account and reach out to you so that we can get any underlying issues identified and resolved.
Thanks for your patience.

Similar Messages

Why is the Bitlocker PIN screen sometime blue and sometimes black?

I am using Bitlocker on a Windows 8.0 laptop. I have noticed that sometimes when I boot up, the Bitlocker PIN screen has a blue background with white text and a white, full rectangle box to type the PIN in. Yet other times the Bitlocker PIN screen is black
with white text and the "box" to type the PIN in is just a blank space framed by braces.
This is not necessarily a problem since in either case I can put in my PIN and everything works correctly, I just want to know why are there two fundamentally different Bitlocker PIN screens and what causes one to appear instead of the other?

By the way, when I booted up today, I got the normal Blue BitLocker screen. I have noticed that if I restart the computer from Windows I always get the black screen, but on a fresh/cold boot it seems random which one I get.
Ok, I see the screen now, it mostly seems a fast boot causes this issue. Since the screen image depends on the behavior you shutdown the PC: "Restart" or fresh/cold boot. As a test, I suggest you disable the fast boot feature in Windows8 and
check if it is the culprit.
Type "powser button" in the search charm bar, then click "Change what the power buttons do", Untick the "Turn on fast startup (enabled)"
Check whether the screen remains black screen.
Yolanda Zhu
TechNet Community Support

How to deactivate the screen fields dynamically in Module Pool Program?

Hi guys,
 How to activate & deactivate the screen fields of a module pool program
dynamically through program. Like Change mode and display mode in a single
screen.

Hi,
Make use of a Variable,say gv_flag, for both Activate and Deactivate functionalities. As many times you hit the same button, change this variable value. For example, let us say first time you hit this button, assign value 'X' to this variable. Second time you hit this button, assign value ' ' to this variable. In PBO based the variable value you have to Activate and Deactivate.
PBO.
if gv_flag = 'X'. " Activate
 loop at screen.
 if screen-fname = 'ITAB1-MATNR'.
 screen-input = '1'.
 modify screen.
 endif.
 endloop.
elseif gv_flag = ' '. " Deactivate
 if screen-fname = 'ITAB1-MATNR'.
 screen-input = '0'.
 modify screen.
 endif.
 endloop.
endif.
PAI.
case sy-ucomm.
 when 'ACDC'. " Activate/Deactivate
 if gv_flag = 'X'.
 gv_flag = ' '.
 else.
 gv_flag = 'X'.
 endif.
endcase.
thanks,
sksingh

Is there a way to change the pin color in iPhoto so I can pin my photos and places from those from others. i think it would be cool to see where my friends have also been but not mix it with mine. Thanks

s there a way to change the pin color in iPhoto so I can pin my photos and places from those from others. i think it would be cool to see where my friends have also been but not mix it with mine. Thanks

No
Suggest to Apple
You can make a smart album based on camera to seperate photos
LN

Changing the selection screen based on the option in list box option

Hi Experts,
I have a list box parameter in my selection screen,
i have four options and i am changing my selection screen based the option selected.
see my code below,
at selection-screen output.
GS_VRM_VALUES-KEY = '1'.
GS_VRM_VALUES-TEXT = TEXT-S02.
APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
GS_VRM_VALUES-KEY = '2'.
GS_VRM_VALUES-TEXT = TEXT-S03.
APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
GS_VRM_VALUES-KEY = '3'.
GS_VRM_VALUES-TEXT = TEXT-S04.
APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
GS_VRM_VALUES-KEY = '4'.
GS_VRM_VALUES-TEXT = TEXT-S05.
APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
CLEAR: GS_VRM_VALUES.
CALL FUNCTION 'VRM_SET_VALUES'
 EXPORTING
 ID = 'P_DROP'
 VALUES = GT_VRM_VALUES
EXCEPTIONS
 ID_ILLEGAL_NAME = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT SCREEN .
 CASE P_DROP .
 WHEN '1'.
 IF SCREEN-GROUP1 = 'M2' OR
 SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
 SCREEN-INPUT = 0.
 SCREEN-ACTIVE = 0.
 screen-invisible = 1.
 MODIFY SCREEN.
 ENDIF.
 WHEN '2'.
 IF SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
 SCREEN-INPUT = 0.
 SCREEN-ACTIVE = 0.
 screen-invisible = 1.
 MODIFY SCREEN.
 ENDIF.
 WHEN '3'.
 IF SCREEN-GROUP1 = 'M2' OR
 SCREEN-GROUP1 = 'M4' .
 SCREEN-INPUT = 0.
 SCREEN-ACTIVE = 0.
 screen-invisible = 1.
 MODIFY SCREEN.
 ENDIF.
 WHEN '4'.
 IF SCREEN-GROUP1 = 'M2' OR
 SCREEN-GROUP1 = 'M3'.
 SCREEN-INPUT = 0.
 SCREEN-ACTIVE = 0.
 screen-invisible = 1.
 MODIFY SCREEN.
 ENDIF.
 WHEN OTHERS.
 IF SCREEN-GROUP1 = 'M2' OR
 SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
 SCREEN-INPUT = 0.
 SCREEN-ACTIVE = 0.
 screen-invisible = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDCASE.
ENDLOOP.
my problem is when i change the option in the list box, the particular modify group ie, the screen is getting changed only after i press enter, So please suggest me how i can change the screen without pressing enter.

Hi,
without using VRM_SET_VALUES...you just create one data element by going se11....create one domain for it...now give the values in the "value range" tab....and at the time of declaration just write ..
PARAMETERS var1 TYPE <your created data element>
 AS LISTBOX VISIBLE LENGTH 20
 USER-COMMAND onli
 DEFAULT <one value>.
You will get the same effect as list box....and make it mandatory..
Arunima

Portal Run time error after changing the logon screen

Hi all,
I am running an EP7 SP08 and I try to change the logon screen as described on:
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
I copied the 'com.sap.portal.runtime.logon.par.bak' file, renamed it to 'my.new.logon.par'. after that I extracted the file with winzip. I opened the directory 'PORTAL-INF\lib\' and there I extracted the file 'umelogonbase.jar' with winrar. I opened the file 'logonLabels_en.properties' and changed the entry 'xtit_WELCOME=Welcome' to 'xtit_WELCOME=blablabla'.
I repacked the umelogonbase.jar with winrar again and after that I repacked the 'my.new.logon.par' with winzip again.
Then I placed the par file back at '<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd' and changed the authscheme.xml with the new par file and changed the 'login.authschemes.definition.file' all described on the help.sap.com url mentioned above.
However, when I restart the portal and open the logon screen I see the error message:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
See the details for the exception ID in the log file
The default trace shows the following message:
An error occured during authscheme computation.
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : my.new.logon.certlogon
Is there anyone who knows what goes wrong? The description on help.sap.com is very straightforward but still it doesn't work for me...
Any help would be appreciated.
Kind Regards,
Nico van der Linden...

Hi,
Check if you did the following steps pertaining to the authschemes.xml file:
--> Download the authschemes.xml to local drive. Rename the file to,say, authschemes_new.xml
--> In authschemes_new.xml, did you change all entries of com.sap.portal.runtime.logon with the name of modified logon par file?
-->Upload the authschemes_new.xml file using configtool; and, change the property login.authschemes.definition.file to authschemes_new.xml in configtool.
-->Finally,restart your portal. Hope it helps.
Regards,
M.Subathra

HT1212 Is my screen supposed to change from the screen with the charger and the iTunes circle to my lock screen while it's in recovery mode?

Is my screen supposed to change from the screen with the charger and the iTunes circle to my lock screen while it's in recovery mode?

Is Find My Phone turned on, on your phone? If so, eject from iTunes, login to iCloud.com, locate your phone, then erase it.
Does the same thing...removes the passcode. Then, either restore from backup, or setup as a new device.

The corner of my screen is creased. It didn't affected the images, but is creased. Do I have to change all the screen? Is it too much expensive?

The corner of my screen is creased is not a big thing and it didn't affected the images, but is creased.
Do I have to change all the screen even if it doesn't affect the images on the mac?
Is it too much expensive?
Thank you!
Paulo

Talk to the Genius Bar, get a free estimate.
The worst you lose is a couple of hours of time.

How do I change my Pin for Scan-To-Email from ePrintcenter on the HP 7520 Photosmart?

Upon enterinng your email initially, you are sent a randomly generated 4 digit pin code for all your scan to email thereafter.
Is there anyway you can manage this account and change the pin?
I want to change it to something more easily remembered.
I have registered and logged into eprint on the HP website, but that only allows me to create posts here and add my printer to my account and change the eprint email of the printer. There is no option to link my eprintcenter account and/or change my pin number.

Hi djlongy,
I am sorry at this time you cannot change your scan to email pin number. I like your idea it would be a nice option to have.
Hope this helps.

Dynamic selection screen change in Selection Screen.

Hi Experts,
I am not getting dynamic screen change on selection screen. can you give solution for the following scenario.
I have 3 radio buttons on selection screen. Example: R1, R2, R3.
I have 5 fields on selection screen. Example : F1, F2, F3, F4, F5.
When i select radio button 1 i will get F1 field screen only.
When i select radio button 2 or 3 i will get F2 and F3 fields screen only.
When i select radio button 3 i will get F4 and F5 fields screen only.
Any one give me solution for the above scenario very much thankful.
Thanks in advance,
Sai

Hi
try this code,
REPORT ZTEST_3RB.
TABLES : KNA1,EKKO,VBRK.
PARAMETERS : SALES RADIOBUTTON GROUP VIJJ USER-COMMAND VJY ,
PUR RADIOBUTTON GROUP VIJJ ,
BILL RADIOBUTTON GROUP VIJJ ,
TOTAL AS CHECKBOX.
SELECT-OPTIONS : S_CUSTNO FOR KNA1-KUNNR MODIF ID AKP DEFAULT 1000 TO 1033,
S_PONO FOR EKKO-EBELN MODIF ID VKP,
S_BNO FOR VBRK-VBELN MODIF ID PKP.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SALES = 'X'.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF PUR = 'X'.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF BILL = 'X'.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
i think this will help your problem,
Regards,
Vijay

Change LDB sekection screen

Hi all
can, we change LDB selection screen according to our requierment.

Hi Raj,
Yes. we can.
try the below link for more info.
[http://help.sap.com/saphelp_nw70/helpdata/en/9f/db9c2e35c111d1829f0000e829fbfe/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/9f/db9c2e35c111d1829f0000e829fbfe/content.htm]
[http://www.abapcode.sapbrainsonline.com/2008/03/selection-screen-abap-keyword.html|http://www.abapcode.sapbrainsonline.com/2008/03/selection-screen-abap-keyword.html]
Reward if found helpful.
Regards,
Boobalan Suburaj

User exists for changing the selection screen of the transaction CS11

Hi,
I want to change the selection screen of the transaction cs11 and modify the ALV output.
I searched the old forums but not got satisfactry results.
I want to change the plant and material from the parameter to the select option.
i dont want to copy the transaction for the zcs11.
any suggestion on this ?
Regards,
udupi

one more requirement i have is that, i need to remove all the header fields such as material , plant etc and place that field in the item level. i can use the user exists PCSD0002 for the adding the customer field in the item. but how can i removed the header level field such as plant and material. whether we have any user exits for that?

Delete future changes in person Screen using API

Hi all,
I am working on converting Contingent worker into an Employee using API. (Steps : terminate CWK API -> hire_into_job API)
In that, If any future changes exists in person screen for a contingent worker then its not allowing me to terminate that person.My client requirement is to remove future changes if exists and convert as an Employee.
I am not able to find the correct API to delete the future changes in person screen. I have checked the hr_person_api.delete_person but in API description, they mentioned it is to purge the person totally from database.
Please help me on this.
Thanks in Advance.
Regards,
Mani

Sorry mate, cant find any.
Bad that there isn't a public API for the same.
Not checked the code in PERWSHRG.fmb.
But how many people would have future changes ? Are there 10s of 100s ?
may be you can -
# If you just have simple changes in the future(i.e. no person_type changes which effect Periods of service etc..), you can simply delete the future changes and move the end-date of the penultimate record to end-of-time(31-Dec-4172). Just be sure this wont effect any others child tables(assignments, per_periods_of_service, per_person_type_usages_f etc..)
Cheers,
Vignesh

How do you change the logon screen in 10.7.4

A few months ago I changed my logon screen background to something more desirable for my tastes. Recently, I updated my software to vers. 10.7.4 and the update reverted my custom logon screen back to the original. I tried changing it back, but it seems as though the location of the image has been changed as when I navigated there, my original "Custom image" was still there, but my actual logon screen still displays the factory image. What gives? Where do I go to change back to my custom image?

I love Apple and I love my MBP. Also, I understand where your coming from when you say I shouldn't be messing around with the OS resources. Normally, a person would not go through the trouble (and/or the possible catastrophic consequences) of changing things like this, but computers fascinate me and I love learning about them. I'm sure there are many others out there like me. It is just a personal preference of mine to want to change the logon background (and gain the learning experience that goes along with it). My preferred logon screen DOES pay homage to Apple and being a second year programming major (yes, I am thus far only in my second year) it is what I like to learn about. I would not have endeavored in something like this if I did not think I could fix it if something went wrong. Like I said before, it would be nice to be able to change it as easy as it is to change the desktop background, but the learning experience is valuable too.

What is module pool programming?how we can change the standard screen?

Hi EXPERTS
what is module pool programming?how we can change the standard screen using module pool programming ?
please explain with example.

Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
regards,
venkat.

Change/Deactivate pin screen

Similar Messages

Maybe you are looking for