Change Field of FI Document when saving MIRO or MIR7

Hi.
i want to change an field of an FI-Dokument when saving the MM-Dokument.
i use a badi for this, but i can't find the BKPF stucture.
what must i do`?
thanks
marcus

Hi Marcus,
For SD to FI document, i once checked the BADI AC_DOCUMENT. Check if this is triggered for your transactions.
But there is a limitation on the Accounting header fields that can be changed
According to the below note only the field BKTXT is released for change at header level
Note 1025810 - Field BKPF-BKTXT (doc header text) empty in the FI document
What is the BADI which you are using ??
Regards

Similar Messages

Signing digitally changes fonts in document when saved

I have just been sent a couple of document to sign - something I have done many times in the past few weeks.
When I save these documents after signing them - much of the text in the documents changes to something difficult to read (I suspect it may be courier).
This seems like a serious error to me as a lot of the point of digital signatures is that you sign and return a document that you can't otherwise have made changes to.
Is there anything I can do to stop this happening?
I'm using Acrobat Reader 10.1.9 on Mac OSX 10.9.2 (Mavericks). The documents were created on a PC.
I've attached a limited screen shot - although the document is fairly confidential so I can't upload most of it.

Hi Steve,
Thanks for the reply. Unfortunately, my question was posted so long ago that I no longer have access to the documents. I printed and signed paper copies and deleted them. So the problem has gone away for me. However, I DO think this is a very serious issue.
I am a bit rusty now but I used to work a lot with Postscript and PDF. In my day, you could only realistically modify the content of a pdf document by appending new content to the file and then appending a new index. That ensured that, although the visual appearance changed, the underlying electronic document did not and even deleted items were still present - just no longer indexed and hence not displayed. That was a great system as it maintained an audit trail. I assumed that was how signatures worked which is why I was surprised to see the symptom I sent you.
I fully understand all you say about font substitution and multi-master fonts but I fail to see why it is relevant. If adding a signature is coded in a “well behaved” manner, adding it could not affect the rest of the document - including embedded or non embedded fonts. If it is not coded in that way, and some sort of active editing of the original content is going on, I am concerned that the legality of signed documents is seriously compromised as, if you can modify one bit of the original to add a signature you can edit any other bit of the document and subtly change it’s meaning WITHOUT AN AUDIT TRAIL. If that is what is happening, I for one would be wary of accepting important documents as signed PDFs instead of paper documents without thoroughly scrutinising the whole thing to see if any subtle changes have been introduced.
All the best
Dave

How to record value of field to perform action when saving with new value

Hi,
I have a multi-tabbed form (Forms 6i). I need to include code so that when a field is changed on one tab and is saved, then I need to update some fields on the other tabs.
My first question is: How can I record a copy of the field whenever data is brought into the form (ie: through a query), and then what is the best way to update the other data:
1) Update the database and then requery somehow
2) Update the fields on the other tabs and then commit to the database?
And roughly I how I do it?
Any help appreciated
Adam

> if the user is inserting a new record and I try and use the DATABASE_VALUE property on that field.... what is going to happen?
Read the on-line help for Database_value. Use :System.record_status to determine if the record is being inserted, then don't get database_value. It is not clear, but I believe on such records, it returns the current value of the item, not a null value. Regardless, it is useless.
If you want to update fields in other blocks in your form automatically based on changes in a different block, you can start a non-repeating timer in a when-validate-item trigger on the field. When the timer expires, you can navigate to the other blocks and to various records, and update the fields in the other blocks. Then when the user commits, all changes will be applied together. The only trick to using a timer like that is that in the commit process, you also need to check to see if the timer exists, and if it does, delete the timer and do the updates to the other tables.

MIGO printing material document when saving.

Hi,
how enabling automatically the printing of materials document in MIGO when saving ?
Best regards

The steps are the following:
trx M706 or SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03;
Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1, Print Parameter is 7;
trx MN21, for output type WE01, WE02, WE03 select Tr Type WE, Print Version 1, 2, 3, maintain Print Item as 1.
For enabling printing when user post a goods receipt is necessary set in trx SU01 for the users the parameter NDR and activate it with an X.
This will set the tick in the field XNAPR in MIGO.
At every logon system will propose the field checked
If the user will remove the tick or will put again the tick during a session system will remember
the last setting.
At the following logon system will propose again the above field checked
System will also remember if user has set in MIGO "GR Note Vers1 or GR Note Vers 2 or GR Note Vers3" for the entire session and furthers logons.

Preview corrupts PDF documents when saving

There appears to be a serious bug in Preview and/or OS X's PDF creation libraries, that causes PDFs to be "invisibly" corrupted.
My situation is: I have a number of PDFs that have been created using Windows-based OCR software. They are standard PDF/A documents, and when I open them in Preview they display fine. More importantly, I can "copy" the text from the document to the clipboard and it works as you would expect.
However, if the PDF document it edited in any way - page order changed, a page from another document moved into the document etc - and then saved, the resulting PDF is corrupt. Although the text appears on the screen normally, any text copied to the clipboard is garbled: for example, the displayed text:
AUTUMN SPECIAL!
appears in one of my documents. However, highlighting it and copying it results in
*)﴿*%&(﴾'"!# $
in the clipboard.
I now have hundreds of documents that are effectively useless, as I cannot accurately copy the document text. I know others have had the same issue (see the posts in this Superuser.com thread for examples). The issue would appear to go as far back as Lion and possibly before then.
Is this a "known issue"? And has anyone come up with work-arounds - other than re-OCRing the files (usually by exporting as TIFFs, reOCRing etc)?

This issue is still happening on Mavericks and it also happens with Adobe Acrobat Reader. If you highlight some lines on a PDF text and then save it, the OCR becomes unreadable. If you try to redo the OCR on Acrobat Pro, this is impossible because the pages 'contain renderable text'. The only solution I can fathom is not to use annotation on any PDFs. The strange thing is that I cannot find any solutions to this, or any bugs submitted on Acrobat's forums, where they should also be, because this is not just a problem with Apple.

Second document when saving as pdf

My computer just started doing something I find really weird. I am not sure if it is a setting in Acrobat or something else. When I use 'Print>Save as pdf' to save a Word file as a pdf, it does that, but now is also producing a second document, with the same file name, but a 2 afterward. That file has all sorts of information about my editing on the original Word file. So the file Abstract Evolinguistics 2.pdf shows this:
Filename: Abstract Evolinguistics.docx
Folder: Macintosh HD:Users:Gerry:Downloads
Template: Macintosh HD:Users:Gerry:Library:Application Support:Microsoft:Office:User
Templates:Normal.dotm
Title:
Subject:
Author: Gerald Rau
Keywords:
Comments:
Creation Date: 29 April 2013 9:50 AM
Change Number: 15
Last Saved On: 30 April 2013 11:35 AM
Last Saved By: Gerald Rau
Total Editing Time: 148 Minutes
Last Printed On: 31 May 2013 10:23 AM
As of Last Complete Printing
Number of Pages: 3
Number of Words: 1,180 (approx.)
Number of Characters: 6,728 (approx.)
Where is it getting this information, and why is it printing this file? Has anyone seen this before?
I am running Acrobat 9.5.4 in Mac OS 10.7.5

With a little more work and thought I found the answer to my own question. This is apparently a result of the preference settings in Word, not Acrobat. In Word Preferences>Print>include_with_document there is a checkbox for document properties that prints an extra page with this information, which is interpreted by Acrobat as a separate file. Apparently a file I received from someone else had that checked and it changed my Word preferences. That in itself I find strange, but that is a problem for a different forum.

VBOF/SDBONT06 does not update "last changed" field of billing documents

Hello,
we have developed a solution in BI, where billing document information (VBRK) and corresponding condition information (KONV) is loaded into infocube in BI. We want to work with delta-loads in BW. The delta loads can be triggerred based on field ERDAT (creation date) or AEDAT (last change date) in the VBRK table.
However, the VBOF/SDBONT06 program does only update the condition information in KONV, but does not change anything to VBRK. Therefore the AEDAT field in VBRK is not changed. And the records in KONV table do not have a creation/change date at all. Thus, the delta load in BW will not pick up the changes made by VBOF.
Does anybody know whether e.g. user-exit for VBOF/SDBONT06 exists that enables to update the AEDAT field of VBRK table?
Thanks

Hi,
You are correct that stauts is updated in table VBUK and VBUP.
However, a sales order does not determine a billing status for delivery related billing, field
VBUP-FKSTA is only determined for delivey.
So, it is correct behavior that VBUP-FKSTA = BLANK when searching VBUP with
VBUP-VBELN = sales order number.
Just because of above reason, you will not find billing status field in VA03 -> goto header/item;
you could only find billing status field for delivery in VL03N -> status overview.
It seems that you are trying to find out sales orders that have been fully deliveried and fully billed, am I right? As far as I know, there is no directly table/field/tcode that could meet your requirement.
You could consider following workaround:
firstly, get a list of deliveries that have been fully billied(search VBUP with VBUP-FKSTA = C or search VBUK with VBUK-FKSTK = C);
Secondly, using these deliveries to search table VBFA to find out related sales orders.
Hope this helps.
Best regards,
Crystal

Flash changes apostrophe to question mark when saving data?

Hi,
Ok these are the steps I take to create the problem within my Flash application.
1. Copy and paste a string from a word.doc which contains an apostrophe
2. I then save this data to a XML doc.
3. reload that XML data, now the apostrophe has changed to a square box
4. I then resave this data
5. I reload this data and now, the square box has changed to a question mark.
My question is, how do I stop this from happening other than not copying from a word doc?
Is there something extra I have to do when parsing the string into its saved format.
Currently what happens is:
1. Pass the string from the input box to an object
localTextObject.textData = myInput.text
2. The object is then parsed through a custom Object to XML parser
for example:
textNode.text = "";
textNode.text.appendChild( localTextObject.textData );
3. And then an XML file is saved local with this data in it.
Does Flash do something wonderful along the way as so by the third time around we have gone from a speech mark to a question mark?
Any help with solving this problem would be very much appreciated.
Thanks

Apostrophes from word aren't part of the normal ASCII character set. They've been mucking up plain text forever...
You can use a RegEx to strip them out, or just change them to regular apostrophes. Something like so should work:
reg = new RegExp("“", "gi");
m = m.replace(reg, "");

Personal Data - Field value PERID deleted when saving

Hi,
When the user updates the personal data view in ESS the field Social Security - PERID gets updated with blank value (i.e. if you only change nationality or any other field). I'm not sure what is causing this, I'm not getting the same problem when updating the infotype directly in the backend.
Does anyone know what might be causing this?
BR Olof

Exactly!!! This was it.
Thanks for helping out.
Br Olof

Writing 2-D array to spreadsheet file changes value of time column when saved

I have a program that creates a new row in a table each time the loop performs. Each time the loop performs and a row is added to the table, the program uses the "write to spreadsheet file.vi" to save this new table over the previous table. The array is also visible on the front panel of the vi. The program works in such a way that you can stop adding data to the array, start adding data to a new array, then come back to the original by using the "read from spreadsheet file.vi". My problem comes after opening the spreadsheet file. The first column of the array, which corresponds to the time when the data in that row was taken, has different values than those that were seen when the array was originally displayed on the front panel. In fact, all of the rows that were created the last time the program was run with that array have the same value in the time column, while all of the other columns keep their correct values. Here is an example of what is happening...
When I start the program, and run it for 5 iterations, I get a table like this displayed on the front panel:
3241713920
85.88012
93.88012
1.735015...
3241713930
85.97603
93.97603
1.747003...
3241713940
84.58855
92.58855
1.573568...
3241713950
84.48096
92.48096
1.560119...
3241713960
84.93667
92.93667
1.617084...
This array is saved to the spreadsheet file with each added row. If I initialize and build another array, then come back to this first array using "read from spreadsheet file.vi," I will receive the following table:
3241713920
85.88012
93.88012
1.735015...
3241713920
85.97603
93.97603
1.747003...
3241713920
84.58855
92.58855
1.573568...
3241713920
84.48096
92.48096
1.560119...
3241713920
84.93667
92.93667
1.617084...
If anyone could tell me why this is happening and/or how to fix it, that would be greatly appreciated. One option I have contemplated is just having each individual row appended to the file instead of resaving the entire array with each iteration. However, I would prefer to do it the way I am currently doing it, so I can pass the array through each time and perform different tasks on it, such as averaging the values in columns over different time periods. Thank you in advance to anyone who can help.

DWDerr wrote:
If anyone could tell me why this is happening and/or how to fix it, that would be greatly appreciated. ...
This KnowledgeBase article may help. I think things changed in LV8.20, but I could be wrong.
=====================================================
Fading out. " ... J. Arthur Rank on gong."

How do i change the webpage file format when saving a webpage?

whenever i try to save a webpage it automatically does so using a chrome html format. windows does not recognize this format. how do i change it? thanks

I'm not sure what you mean by a "chrome html format."
I save pages all the time with Firefox 3.6.16 (and now 3.6.17) and have no problems.
When you select Save Page As, it opens a dialog window so that you can indicate where the page is to be saved.
In the Save as Type dropdown list are format options - "Web page, Complete", "Web Page, HTML only", and "text files"
If you select Web Page, Complete, Firefox saves the HTML file and creates a folder where it stores all the other files associated with the page. If you then open the HTML file, it should display properly in Firefox (or any other browser).,
If you select Web Page, HTML only, Firefox saves only the HTML file, no other files are saved.
If you select text files, Firefox saves only the text, it does not save any of the HTML. Basically, you get what you can see on the page without any of the formatting.
I've never seen an option, in Firefox 3, to save a file as a "chrome html format."
I've only see what I described above.
One other thing, I suggest you upgrade to Firefox 3.6.17. At 3.6.10 you are quite a way back and have missed some security updates.
I don't think you can use the update link under the Help menu, you may have to go to the Firefox site and download it manually. It would not hurt to look for some instructions as to how to go from 3.6.10 to 3.6.17.
Stan

Can I have a blank field on my document when using a combo box with a drop down list in Word 2011 for Mac?

I am creating a drop down list using a combo box in the Developer tab. Once I protect my document I want the field to remain empty and not show any of the items on my drop down list. Is there a way to do this? Currently it shows one of the items on my list.
Thanks

Paul's answer is correct.
Since this is a Word IT forum for Windows, in the future you should use the
answers.microsoft.com forum. It specializes in Word for the Mac. BTW - Paul stops by there also, so you'll still get his advice from there. :-)
Kind Regards, Rich ... http://greatcirclelearning.com

Change the default HTML template when saving for web

Hi,
Is there a way to change the default HTML output template when you go to "Save for web" and select "HTML & Images"? I would like to modify the default HTML <head> tag.
Thanks.

Two observations.
First — "Tools-> ...." is specific to Acrobat X and XI. It did not exist prior to Acrobat X.
Second — Acrobat 9 Pro / Standard (nor earlier release) does not support viewing a PDF page containing a scanned image and performing a right-click ... Save Image As.
The context menu provided by Acrobat 9 Pro with a right-click on a scanned image is:
The context menu,from a right-click with the TouchUp Object tool selected, for Acrobat 9 Pro is:
So, to paraphrase what Paul Harvey used to say ... What's the rest of the story?
Be well...

Downloaded attachments change title and add numbers when saved

I've had this problem a very long time ... with my previous G-4 and older Operating Systems.
Using Thunderbird for my e-mail: Someone sends me an attachment titled, e.g., <In Tray Exercise for Sudan.doc>. When I download and save it, the title becomes <In Tray Exercise for#169769.doc>.
This is a serious problem when my organization wants to maintain a file naming system.
How can I stop the file names from changing? Thank you.
By the way, this does not happen when I use Apple Mail.

Then perhaps the place to ask the question is at Thunderbird's tech support. This appears to be something related to it.

Save Accounting doc num in Ztable when saving MIRO

Hi all,
When I save MIRO I want to save the accouting number related to it in a Ztable,
Pleae suggest how to do it.
Thanks,
Salman Zahir

HI,
I am not exactly understanding your requrement but as far as i understand that you want to
store MIRO account number to ztable when you save it.
it is better to use a BADI.
Use this BADI CHANGE_IN_UPDATE and in that there is method CHANGE_AT_SAVE
in that method just use insert DB statement. I hope it works.
Regards and Best wishes.

Change Field of FI Document when saving MIRO or MIR7

Similar Messages

Maybe you are looking for