Change form Mode as Add for master data while Loading

Hi,All
I have a master data form(user form). By default it will load and shows Find mode but i dont want find mode i want add mode after loading
plz suggest me a good idea..
By
Firos.C

Hi,
After the form is loaded in the load event, change the form mode.
objForm.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE
Or
objSBOAPI.SBO_Appln.ActivateMenuItem("1282")
Hope it helps,
Vasu Natari.

Similar Messages

REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS

Hi Guru's,
REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS?
AS I AM NEW TO SAP-BI CAN ANY ONE GIVE THE DETAIL EXPLANATION ON IT.
IT WILL BE GREAT AND HELPFULL.
Thanks and Regards,
CM

Hi CM,
yes you can perform the repeat delta even for the master data if the datasource which was supplying the data was delta capable.
You can do the repeat delta only in case if your previous request was erroneous and dont forget to make the request red in the status,so that system will treat like you are requesting the failed request once again where in case you will miss the previous request, i,e erroneous request if you dont make the request red.
when you make the request red manually in the status,the pointer will move to the previous request once again in the delta queue and there will be no chance of missing the delta records.
This process was same for both transaction as well as master data.
Regards,
Sunil...

BW - Delta for Master data not loading

Hello All,
I am not able to load delta for master data of vendor and material.
The initial load works fine but when I load delta it gives an error
" The extraction program does not support object 0vendor"
" ALE change pointers are not set up correctly"
Do i need to activate the change pointer in BD61. I was not sure so checking up with all experts.
Regards
Vanya

Hi Ravi,
We faced the same problem as you for 0MATERIAL_ATTR and we solved it by the following steps,
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
We have have got resolved by doing these steps and it may help for your problem as well.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence

Is there settng source system level for master data delta loading perfo

Hi Viwers,
Good Morning,
I am loading data from the source to target level for Master data it is taking too much time,I would like to know the how to increase the master data delta loading performance.
I would like to know the source system level is there any setting requited & target system level also.
Please give your inputs..........
Thanks & Regards,
Venkat Vanarasi.

Venkat -
Are u deleting the indexes of data target before delta loading ? If not,delete the indexes of data target before delta loading and recreate them after delta loading is done.This procedure increase load performance.You can perform whole procedure in process chain.
Anesh B

Request Status for Master Data Attributes Load

Dear All,
We are trying to load attribute master data and volume of which is relatively huge around 10,000 records.
We are facing challenge while updating attribute data from master data info object , the load status remains in yellow status and when we went to details screen it states that data is transfered to transfer rule . ( it has been loaded successfully in to PSA).
Could anybody please give some hint on this challenge ??
Regards
Kapadia

Hi Paolo Siniscalco,
You are right, as number of records are more , i have chosen update of "Only PSA" and then "Subsequently in Data Targets".
I tried other option also which is infopackage schedule "Execute in Back ground" and
"Request batch process runs untill all data is updated in BW". And process went in to infinite loop.
Some how i am not able to track out why the request status is not changing .
Regards
Kapadia

How to do Stastical Setup for Master data Loading

Hi All
Thanks a lot for all guys,who are helping me a lot.
I want to do stastical setup for Master data of sales order.I know how to do for transaction data.
But what is the procedure for MAster data in SBIW-Tcode.
Regards
Balaji

Hi,
Actually first we should load data to Master data table and then to Transaction load data.By this reporting performance will be good.Right?
Actually this will decrease the time of transaction data loading .So it improves the loading performance , not reporting performance.
Now I got a doubt from where this Master Data is been loading? and how to load this data.
2LIS_11_VAITM and 2LIS_11_VASCL are the DS for Transaction data , not for master data.To load the master data, first of all find out the master bearing characterstics in the data target.And then search for teh DS of master data in R/3 with tcode RSA6 .You will use characterstic(info object) as the search option here.
For example 0materail is the Master characterstic.
And you can see the DS for this Characterstic in RSA6(if it is not there, you have activate it from RSA5)
0MATERIAL_ATTR
0MATERIAL_LGEN_HIER
0MATERIAL_LKLS_HIER
0MATERIAL_TEXT
With rgds,
Anil Kumar Sharma .P

Why to use chnage pointers for master data idoc why not the change idoc

Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.

Hi,
It was a good question ... SAP seems never designed the change pointer to handle transactional data IDocs. Only for master data IDocs distribution purposes.
It may due to volume data ... the transactional data can change many times within a day compare with master data which hardly change or once a while.
Regards,
Ferry Lianto

Online Change Transfer for Master Data

HI,
whats transaction for Online Change Transfer for Master Data, and how to use it.
regards
manish

Hi Manish ,
You make the settings for change transfers in transaction *CFC9 (Change Transfer
for Master Data setting)*
For material masters, customers and vendors, the change transfer can occur
periodically or can be executed online immediately. You also have the option of
deactivating the change transfer.
You can also configure an immediate change transfer for work centers and
resources. In this case, the change transfer only concerns the header data of the
individual work center capacities.
Hope it will help you.
regards
Ritesh

Effect of 'No update' for master data texts

Hello all,
I am using flexible update - update rules - for master data text. I want to confirm effect of 'No update' in following scenario
In the fisrt set of update rules -from first source system -I have mapped both short text and long text
Key | short text| long text
......| overwrite| overwrite
K1 | some SHTX| some LGTX
In the second set of update rules, I have selected 'No update' for Long text
Key | short text | long text
......|overwrite| NO UPDATE
K1 | some SHTX |
My loading sequence is first source system followed by second source system
what should be my ultimate long text and why?
Many thanks in advance!
Regards
Sanjyot

Hi surekha,
your long text will not get changed.
Take the example you mentioned
Key | short text.....| long text
........| overwrite......| overwrite
K1 | some SHTX.. | some LGTX
In the second set of update rules, I have selected 'No update' for Long text
Key | short text... | long text
........|overwrite......| NO UPDATE
K1 | some SHTX. |
In the second set of update rules, you mentioned "No UPdate", So, when a record with the same key is found n Masterdata, it is not going to make any changes to the field Long text.
Where as short text will get overwritten.
Take some data for ex with the above mentioned type
data from source 1 : 2000 Maggi Noodles
data from source 2 : 2000 Feasters
when the data from first source system arrives, data will be 2000 maggi noodles
when the data from second source suystem arrives, as there exist this records with same key(2000), it checks for the other fiels
short text will be over written with the value in second system (according to rules its in overwrite mode)
Long text will not be updated as the rule says no update.
hope this helps,
Cheers,
Srinath.
Cheers,
Srinath.

Upload Image for Master Data Product - SAP CRM GUI

Hi,
I see in DEMOS image for master data product TX COMMPR01, when you open transaction image is in top of the screen with the other data.
I create a new product and add an image in Tab Document, however image only is load when I pushed botton preview.
Some idea?
Regards,

Hi Wilbert,
Well it should work if you have loaded the image at the right place in the Tab Document. Please verify the same.
What I did to check this :-
Go to Tab Document -> follow the tree structure Document -> Picture -> Full Size.
The Right click on Full Size ->create -> Document -> Import. And I imported a picture form my desktop. I did the same for Thumbnail. I can see the image in the top right corner of the screen in TX COMMPR01.
Also In order to view the complete picture I just Right click on the file name -> Document -> Display and I can see the full picture.
Reward points if it helps!!
Best regards,
Vikash.

Error : Concatenated values used in documents for master data

Hi Experts,
I am trying to add one characteristics as compounding characteristics to my master data info object.
previously 'Document property' option was checked for the infoobject. so i unchecked it, as it was not allowing me to add the compounding characterisitcs.
After doing the changes, when I am trying to save, its throwing error as 'Concatenated values used in documents for master data'.
Can anyone please help me with what exactly does it mean and what would be the solution to remove this error.
Thanks,
Neelima
Edited by: Potnuru Neelima on Mar 1, 2011 8:39 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:40 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:41 AM

Hi All,
Just found the soultion...wanted to share this....
Actually one document was created on one of my opportunity values, which was not simply visible from edit menu -> documents.
Go to RSA1 -> documents -> master data -> and then give ur info object name -> will get all the documents maintained corresponding to it. Need to delete them.
Then compounding characteristic can be added to our info object.
Regards,
Neelima

DTP for Master data

Hi Guys,
How to extract master data and hierarchies from ECC into BI infoobjects?
Do we follow the same procedure for loading master/hierarchy data as for transaction data - i.e. Load into PSA and then create Transformations and DTPs to load into infoobjects? If so, what is the best approach as far as Full/Delta loads.
1. Is it ok to do a full load into PSA (using infopackage) and then do a full load always (The process chains for master data would be running nightly).
or
2. Should we have 2 infopackages (full and delta) into PSA and then multiple DTPs. (The process chains for master data would be running nightly).
Regards.

Indicator: Only Get Delta Once
Source requests of a DTP for which this indicator is set are only transferred once, even if the DTP request is deleted in the target.
Use
If this indicator is set for a delta DTP, a snapshot scenario is built.
A scenario of this type may be required if you always want an InfoProvider to contain the most up-to-date dataset for a query but the DataSource on which it is based cannot deliver a delta (new, changed or deleted data records) for technical reasons. For this type of DataSource, the current dataset for the required selection can only be transferred using a 'full update'.
In this case, a DataStore object cannot usually be used to determine the missing delta information (overwrite and creation of delta). If this is not logically possible because, for example, data is deleted in the source without delivering reverse records, you can set this indicator and perform a snapshot scenario. Only the most up-to-date request for the DataSource is retained in the InfoProvider. Earlier requests for the DataSource are deleted from the (target) InfoProvider before a new one is requested (this is done by a process in a process chain, for example). They are not transferred again during the DTP delta process. When the system determines the delta when a new DTP is generated, these earlier (source) requests are seen as 'already fetched'.
Setting this indicator ensures that the content of the InfoProvider is an exact representation of the source data.
Dependencies
Requests that need to be fetched appear with this indicator in the where-used list of the PSA request, even is they have been deleted. Instead of a traffic light you have a delete indicator.
Get Data by Request
This indicator belongs to a DTP that gets data from a DataSource or InfoPackage in delta mode.
Use
If you set this indicator, a DTP request only gets data from an individual request in the source.
This is necessary, for example, if the dataset in the source is too large to be transferred to the target in a single request.
Dependencies
If you set this indicator, note that there is a risk of a backlog: If the source receives new requests faster than the DTP can fetch them, the amount of source requests to be transferred will increase steadily.

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

Changing the "Reconciliation Account" in the master data of a Customer

Hi All,
I've to change the "Reconciliation Account" in the master data of a Customer. But this fiel has been made not modifiable.
Could anyone tell how change this?
Thanks,
Gandalf

Hi,
In SPRO, change the field status for the customer account group to optional. Then you can change the reconciliation account of the customer.
The Path -
SPRO>>Financial Accounting (New)>>Accounts Receivable and Accounts Payable>>Customer Accounts>>Master Data>> Preparations for Creating Customer Master Data>>Define Account Groups with Screen Layout (Customers). Here select the account group for the customer and double click on the line. In this screen, double click on Company code data. Then change the field status in Account management for Reconciliation account.
Hope this helps.
Thanks and Regards,
Anit

Change form Mode as Add for master data while Loading

Similar Messages

Maybe you are looking for