Change header in dynamic data

Hi,
I have a 2d array converted in a dynamic data and I want to change the default header before saving in the VI_Express "save to file"
How can I do ?
Thanks.

The LVM Express VI does not have a way to change the header, since it was designed for speed of implementation and ease-of-use, not flexibility. However, you can change it to a normal VI and modify the existing code (make sure you save all VIs to a new location so you do not overwrite the vi.lib versions). Right-click on the Express VI and select Open Front Panel. Be warned - this is a complex VI, since it handles a lot of options. You will need to open several layers of VIs to get to the LVM write section. There is a single VI which writes the header that you can modify.
Another option is to use the subVIs used by the Express VI to create your own VI. Be aware that using unpublished VIs in this fashion can result in broken code when you upgrade to newer versions of LabVIEW. These are unpublished and unsupported interfaces and can change, if needed, at every LabVIEW version. These particular interfaces tend to change about every two or three LabVIEW versions.
It may be easier to write your own header, then use the Write to Spreadsheet File VI to write your data.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Similar Messages

Change Table control Column Header text dynamically

Hi,
I have an requirement to change table control column header text dynamically.
i.e. I have about 10 columns in table control, out that need to change 5 columns header text. These header texts are stored in an internal table.
I had looked into the below link but could not get exactly how to do it.
Dynamic headers in table control
Could you please tell me how to do that.
Thanks in Advance.

Hi Saba,
What you will need to do is this.....
1. First replace the column Header Text box by I/O Fields and name them accordingly.
Say for example we will consider the same example which i had explained in the link.
there in the column header we want the header to change when some dates and entered into two fields which are out of table control say
Start Date: 01.01.2010 to End Date: 06.01.2010
Now we want the header to look like this,
Column No.    -        1               2             3                  4               5               6
Header label   -    01/FRI       02/SAT     03/SUN       04/MON     05/TUE      06/WED
Header name -    SPOTS1   SPOTS2    SPOTS3      SPOTS4     SPOTS5    SPOTS6
then you go as per the instructions in the link......
Let me know if you need further help,
Hope this solves your problem....
Regards,
Abhijit G. Borkar

BADI ME_PROCESS_PO_CUST for changing header data

Hello Experts,
I'm using Method PROCESS_HEADER in Badi ME_PROCESS_PO_CUST in order to change some header data.
I want to change header data depending on the partner data which are on header level.
It works fine as long as there are data changed in the header or item level and not only on the partner screen.
The method in this Badi isn't processed if only partner data are changed. But for me it is necessary to set a special field on the header depending on the partner data.
Regards,
Sven

Hi,
Firstly, for changing Header data without any INSERT/UPDATE?MODIFY statement, badi - ME_PROCESS_PO_CUST will not be useful.
As method you mentioned has no header parameters under CHANGING / EXPORTING clause.
You can use the badi which has the parametrs you want in either change/ Export mode. It can be defined under table also.
Below is the list of important badis gettign called, however none of them contains header values in change/export clause.
ME_CCP_ACTIVE_CHECK
MD_STOCK_TRANSFER
ME_DEFINE_CALCTYPE
ME_PO_PRICING
ME_FIELDSTATUS_STOCK
ME_COMMITMENT_STO_CH
ME_COMMITMNT_PARKING
ME_INFOREC_SEND
ME_CHECK_SOURCES
ME_PURCHDOC_POSTED
Instead you can use enhacement MM06E005 Customer fields in purchasing document.
Create a project under Transaction CMOD.
Assign enhancement as Project component.
You'll find Exit 012. At time of save you can change header im_ekko based on you parterner data tab.
Regards,
Amee.

Change column header text dynamically

Hi,
I have requirement to change the column header text dynamically in sap gui programming. but couldn't see straight forward way to achieve this.
i tried following link but no success:
[Re: Dynamic header text in table control - Dialog programming;
Please share your suggestions if it can be acheived.
Thanks,
Rahul
Edited by: Rahul Yadav on Oct 25, 2010 7:29 PM

>
anmol112 wrote:
> Hi,
> So you can try 1 thing,
> * Dont use default Column Headings
> * Create I/O and choose ouput only and fix them in place of Column headings.
> * pass the values to these I/O accordingly.
>
>
> Thanks,
> Anmol.
How is this different from the previous post?
Rob

MB_MIGO_BADI change header data in tcode MIGO

HI Experts,
I have a requirement to change the feild posting date(BUDAT) in the header data while doing migo.
For this i have implemented a badi MB_MIGO_BADI->IF_EX_MB_MIGO_BADI~PAI_HEADER. This method has the field is_gohead-budat. but when i'm changing the value in the method, its giving an error message saying you cannot change filed BUDAT.
Can anyone help me how to achieve this change?
Regards,
Satyam

HI Harald,
Thanks for your active reply.
I tried exit EXIT_SAPLMBMB_001. But it is not getting called while doing MIGO. I tried putting a break-point.
I followed the following procedure. Kindly correct me if I'm wrong.
1. In tcode CMOD, I created the project: ZMD.
2. In Enhancement assignment i have given the enhacement name as MB_CF001.
3. In component section the exit EXIT_SAPLMBMB_001 has include ZXMBCU01.
4. I have written the following code in the include :
     break-point.
        if sy-UZEIT GE '000000' AND sy-UZEIT LE '060000'.
         XMKPF-BUDAT = sy-datum - 1.
          endif.
5. I activated the project ZMD.
When i execute the tcode MIGO and post the document, ideally it should stop at the break-point. If it does not stop than that means the exit is not being called during the run time.
Could you kindly guide me on this.
The movement type for the GR is 101 and is done for outbound deliveries.
Thanks & Regards,
Satyam

Header description of dynamic data columns dynamically

Hi all,
How is it possible to get Header description of dynamic data columns dynamically??
Thanks and regards,
Harry

Harry,
Don't have the system right now so going by memory.
There are 2 parts - you need to see how you specified the text replacement of the variable. Say on 0fiscper if you specify characteristic value it would show I think 001.2007, 002.2007, etc. If you use one of the text types, it would be based on the description.
I always have to think if I need to put the infoobject name or the variable name in the layout definition in the description part. Off the top of my mind, it would be the infoobject name i.e. 0fiscper for example

Dynamic date display as a heading in module pool

Dynamic date display as a heading in module pool from a ztable
the ZTABLE contain the date from which the date value is to be printed as a heading like
"BILLING FOR THE MONTH OF MAY 2010 WILL BE CLOSED ON 26/05/2010"
thanks,
Sree

Hi Sreekanth,
Simply follow below steps:
1. Create a Input/Output field in screen layout.
2. Double click on it and 'Attributes' window will get opened.
3. Give a 'Name' to it (Ex: Text) and under 'Display' tab, tick 2D display and As label on left
4. Save and Activate.
5. In PBO, use below code,
MODULE status_2000 OUTPUT.
SET PF-STATUS 'DEMO'.        " PF status
DATA: l_f_date TYPE sy-datum.
SELECT SINGLE zdate FROM ztable INTO l_f_date.         " Select Date from ur ZTABLE
text = 'BILLING FOR THE MONTH OF MAY 2010 WILL BE CLOSED ON'.
CONCATENATE text l_f_date INTO text SEPARATED BY spce.
ENDMODULE.                 " STATUS_2000 OUTPUT
6. In TOP include,
DATA: TEXT type string.     " Same name given to Input/Output field in screen layout.
7. Save & Activate.
Thanks..

MIGO change header data before saving

Hi all,
I want to update header data (budat) before saving the material document with MIGO.
Has anybody an idea?
I tried with Badi: mb_document_badi or similar user-exit
MB_CF001 but with none of these I can CHANGE header data.
Is it possible?
Thanks a lot!

check this
MB_DOCUMENT_UPDATE
regards
Prabhu

How can I change a dynamic data into an integer representation I32?

The result of formula box is a dynamic data. I need to change the representation into an integer representation I32. How can I do this?

The I32 conversion icon is in Functions Palette -> Numeric -> Conversion -> To Long Integer. Wire the formula output to the I32 input. The output will be of I32 type.
- tbob
Inventor of the WORM Global

How to change the valid from date of the bom header?

ECM is active in the system.
I want to change the valid from date of the BOM header with the help of a change number.
How can I change it?

Hello
Lets assume that, we are going to change Management for controlling Valid From date
Steps to be followed for creation of Change No
Tcode CC01 for Change No
Click on Change Master
Once you enter into Change master, maintain the description
In the Valid from Date, maintain the date from which you BOM should be current
Maintain the Status (01)
Click on Ojbect Type, maintain for which Object types is the Change no needs to be active i.e. for BOM, Rtg, etc
save the Change No
After the change no is created
Enter the Change No during the creation mode of BOM
THe system copies the Valid from date from Change No

MBO: Change Header Data

Hi all,
We are using the BADI, CHange Header Data (HRHAP00_ACC_HEADER--PART_APPER_ACCESS_2).
The selection screen button of 'further particpant'(others) is not enabled when the Change header data button is clicked.
we have created a filter and turn,
<i>s_header_cust_display-others = c_output_mode_change.</i>
If there is further participant, the selection screen button got enabled.And if furtherparticipant table is initial, the button is not enabled.
I want to enable the furtherparticipant button regardless of the table entry.How to do it?
Points assured for helpful answers.
Regards,
Jothi.P

Hi
<b>First read the documenatation of this BAPI in SE37 Transaction, by pressing F9 Key.
Also do a where-used list for this BAPI and then code accordingly.</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

Dynamic data in header on each page.

So, I would LIKE to put a text frame in a master page, which contains dynamic data (various methods have been tried, XML, Data Merge, Place TXT file) and this frame will load a different line (paragraph, xml node, row) on each page that uses the master template...
I dont think ID (CS5.5) can do this...
Basically I want to show testimonials on each page of a brochure, but load them from an external source so that they dont need to be type in on every page - and can be updated very easilly...
Ideas?
I tried putting a frame on a master page, set the options to only show a single paragraph and to show the next paragraph on the next frame... but every frame on child page, starts with the first row of data...
Im going grey here.

Hi, sorry for the huge delay in getting back.
I've got a text frame place holder in the master,
I placed a .txt file into it, and see the first line/paragraph of text, and also see the red overset text icon
I have assigned a paragraph style to the frame (and also words themselves and that didnt work either).
Ive i scroll down looking at the pages using this master, they all have exactly the same: the first line of text from the placed file...

How do I Change the plot waveform colour on a Dynamic Data type Graph?

I have multiple different plots on different graphs, and I want to set the colours of the different waveforms.
In order to display the waveforms on different graphs, I switched to Dynamic data type and then split the wire
according to how many channels I have.
I can set the graph background colour with a property node, and create cursors of different colours no problem
using the array of references that I have created, so there is nothing wrong with my array of references or the property node.
As soon as I try and wire a colour box into the Plot>Plot Colour control, I get error 1055 out of the property node.
I was wondering if it was an error between the keyboard and the chair, but now I am thinking it is someting more sinister.
The Error box pops up and can't be dismissed remaining the focus until I run TASKKILL on LabVIEW and terminate it.
Any ideas on how to achieve my goal would be appreciated.
(LabVIEW 8.6)
Solved!
Go to Solution.

Hi Sheela,
It's 1 plot per graph, up to 4 graphs displayed on different tabs.
Here are some screenshots
Attachments:
graph_display.JPG ‏135 KB
set_Plot_colour.JPG ‏79 KB

Dynamic data flow from sales order to delivery and vice-versa

Hi Experts,
One of our teams working for a client (transportation industry) on ECC 6.0 is facing an issue in relation to copying of partner data. (Ship-to-party address field changes to be precise)
Currently, whenever the partner address data changed in a Sale order, though delivery is already created prior to this change, the change done is dynamically getting reflected in delivery too. Further, if the partner data in the delivery is changed, this also is getting updated on the preceding document i.e. sales order.
We have checked the copy controls under VTLA and didn’t find any specific modifications made in this regard. Our question is:
Is there any configuration available in standard SAP through which the data updates (like header data viz. partner field data etc.) get dynamically updated forward and backwards in a sales flow(i.e. from sales order to delivery and vice-versa)
Your help on this will be highly appreciated.
Regards,
Jagan

if the partner data in the delivery is changed, this also is getting updated on the preceding document i.e. sales order.
The standard functionality is if you change the address of a partner function, the same will get reflected in an existing sale order. This being the case, can you reconfirm your statement that in delivery, if you change the partner function, the same will get updated in sale order also?
G. Lakshmipathi

How to change VO query dynamically

Hi,
Iam trying to change the VO query dynamically. My req. is I have 6 columns in a header page 3 columns(default single column) for sorting purpose and another 3 columns(default single column) for data querying purpose.
al these are in one view so I have created one VO.
Sorting Searching
A A
B B
C C
When I give any values in Sorting and hit submit button VO query should change dynamically.
I have searched older post regarding this.
My query is some thing like this
SELECT * from cust_table where a = NVL(:1 ,a)
UNION
SELECT * from cust_table where a<> NVL(:1 ,a)
order by a
Iam trying to pas the below part dynamicaly in my AM method
vo.setWherecaluse("where a = NVL(:1 ,a)
UNION
SELECT * from cust_table where a<> NVL(:1 ,a)
order by a ")
and trying to pass the params to that query. But it is not working.Giving error "Bind variable could not find"
Can any one suggest how to solve the issue.
Thanks,
Mahesh

Hello Ajay,
THanks for your response.
My vo query is select col1,col2,col3,col4,col5,col6 from cust_table;
and and changing vo.setwhereclause dynamically based on different scenerios.
in one scenerio i need my query to be some thing like
SELECT col1,col2,col3,col4,col5,col6 from cust_table where a = NVL(:1 ,a)
UNION
SELECT col1,col2,col3,col4,col5,col6 from cust_table where a <> NVL(:1 ,a)
order by a
so can i concatenate my vo.setwhereclause like *"where a = NVL(:1 ,a) UNION SELECT col1,col2,col3,col4,col5,col6 from cust_table where a NVL(:2 ,a) order by a"*
in the setwhereclause iam setting bind variables is this method correct? Hope it is clear pleaselet me know if it is not clear I will explain in detail.
Thanks,

Change header in dynamic data

Similar Messages

Maybe you are looking for