Header description of dynamic data columns dynamically

Hi all,
How is it possible to get Header description of dynamic data columns dynamically??
Thanks and regards,
Harry

Harry,
Don't have the system right now so going by memory.
There are 2 parts - you need to see how you specified the text replacement of the variable. Say on 0fiscper if you specify characteristic value it would show I think 001.2007, 002.2007, etc. If you use one of the text types, it would be based on the description.
I always have to think if I need to put the infoobject name or the variable name in the layout definition in the description part. Off the top of my mind, it would be the infoobject name i.e. 0fiscper for example

Similar Messages

XML Publisher - Dynamic Data Columns Issue

Hi,
I am creating a amortization report where I need to show the amortization schedule for unearned revenue. Customers have signed different years of contract and I need to show the amount as per their remaining contract months. So if there are 2 month remaining in the contract then I should show the data for 2 months only and if there are 10 months then I should display 10 months. If we run the report for both customers then it should display two lines in report. For first customer the data should be only for 2 months and for second row(customer) there should be data for next 10 months. These months should be columns in the report(like excel columns, not rows). I need to display all months in columns instead of rows.
I have acheived that using Dynamic Data Columns as mentioned in the user guide. Everything is working fine except following issues -
1. How to create page level total?_
I have created page total in my template using <?add-page-total:TOTUREV;'UREV'?> and displaying using <?show-page-total:TOTUREV?> but when I run the report in excel format these page total do not display. These columns are static columns not dynamic.
If I run the report in pdf format then the static column total is displayed correctly.
2. When I run the report in excel format then report run fine and it shows all the columns properly but if I run the report in pdf format then the dynamic column are not displayed in their own columns, all the columns are overwriting each other in a single columns itself, its not expanding.
3. How do I get the total for the dynamic columns?_
I need to display the page level total for the dynamic columns also, how do I do that?
4. When I run the report in excel format the 2 decimal places of the numbers are gone(it works fine in pdf output), like 12.50 becomes 12.5 and 14.00 becomes 14. I need to maintain those 2 decimal places. I have tried using <fo:bidi-override direction="ltr" unicode-bidi="bidi-override"><?format-number:CVALUE;'999999D99'?></fo:bidi-override> but this does not solve my problem completely. It shows the values correctly in excel but then I am not able to do any calculation on those columns, looks like it converts them to text values.
Any help is really appreicated. Please let me know if you need the xml template and data file.
Regards
Hitesh

Hi Hitesh,
Can you please upload your RTF and XML template file? I will try to spend sometime on this issue.
Cheers
Sachin

SUB Totals within a Dynamic Data Column

Has anyone ever calculated SUB Totals in a Layout with a Dynamic Data Column?
The TOTAL for all data is expressed on the Data Column tab of the Layout as C(1):C(1) - 0FISCPER / Posting Period is the Dynamic Characteristic. When the system actually displays the 12 columns of data for the Year, the formula for TOTAL is also adjusted - no problem here. But the user also wants SUB Totals, by Quarter, within the Year.
Any insight or suggections are appreciated !
Thanks,
Lyle

Hello,
use variables Q1, ..., Q4 for the quarters and create
data colums as follows
1 Q1 dynamic = X
2 Total C(1)
3 Q2 dynamic = X
4 Total C(3)
5 Q3 dynamic = X
6 Total C(5)
7 Q4 dynamic = X
8 Total C(7)
9 Year Total C(2)C(4)C(6)+C(8)
Regards,
Gregor

Grouping of chracateristics by using dynamic data columns

Hi all,
I want to create a BPS Layout (BW3.5) with the material in the lead column and a KeyFigures, the year and the salesgroup in the data column. The salesgroup is the dynamic characteristic.
Example:
I want to have:
SG1 2007/ SG1 2008/ SG2 2007/ SG2 2008...
What the system is doing is:
SG1 2007/ SG2 2007/ SG1 2008/ SG2 2008
My question is: how can I change the grouping of the columns from year to salesorg?
Can anybody help me?
Best regards,
Rainer

Hi Rainer,
Thanks for your appreciation.
I thought there is not material in your lead column, okay if your case like that i suggest you like this.
I suggest to .
To choose Layout Category:
1. Key Figures in Data Column
Define data column dynamically for : Sales Group
And make the fiscal year, and material as lead column.
In the data column tab, define the key-figures there and mark Dynamic checkbox.
Or if you want to group based on the fiscal year, you can make the fiscal year as you dynamic data column.
Hopefully it can help you a lot.
Best regards,
Niel.
thanks for the points you choose to assign.

Dynamic data column; pdf vs excel output

I have created a amortization report using BIP dynamic data columns. When I run the report in excel format then report run fine and it shows all the columns properly but if I run the report in pdf format then the dynamic columns are not displayed in their own columns, all the columns are overwriting each other in a single columns itself, its not expanding.
Any idea what could be wrong here. Why does it work fine in excel and not in pdf output.
Please let me know if you would like to see the rtf template and xml data file.
Regards
Hitesh

Can you send me the sample xml and RTF ?

Convert "1D array of dynamic data" to "Dynamic data" after auto-indexing with loop

Hi -
I have a question about how exaclty auto-indexing works with the Dynamic Data type when exiting a while loop. I'd like to use the DAQ assistant to record data through an analog input (on the MyDAQ) and then replay that data through an analog output. This works fine if I use the DAQ Assistant to record data for a set amount of time:
However, I run into trouble when I try to use a While loop with a stop button to record data for an arbitrary amount of time. I set the dynamic data tunnel out of the While loop to "Indexing", but then when it exits the loop, it becomes "1-D Array of Dynamic Data" instead of just "Dynamic Data", and get a broken wire when I try to connect it to the input of the DAQ Assistant. I've also tried converting the dynamic data to Array and Waveform data types inside the loop, but have the same issue (they become 2D Array and 2D Array of Waveform respectively when leaving the loop). Try as I might using blocks like Convert to/from Dynamic Data Type, or Array Subset, I'm unable to get them back down to just Dynamic Data or Waveform, which will be accepted by the DAQ Assistant:
One other small note - I'm not sure if using the "Build Array" function with a shift register accomplishes exactly the same thing as just auto-indexing an array out of the loop - so I've tried both, but still have the broken wire issue.
I'm assuming this is just a simple issue of using the right block to convert "1D Array of [Something]" to just plain [Something]. Any help appreciated.
Attachments:
PWM_FlatSequence.vi ‏101 KB
PWM_FlatSequence_While.vi ‏129 KB

I have been facing problem for all temperature values placing the Write to Measurement File outside the Loop.
In Error message it says" Source: 1D array of dynamic data and Sink: Dynamic data".
Is there any means of convering 1D array of dynamic data to dynamic data?
I would highly appreciate any help.
Attachments:
Temperature Logger.vi ‏110 KB

Dynamic Data columns

Hi...
Here's my scenario. My layout is keyfigures in lead columns.
I want Calendar Year in the Header. I want the Calendar Year/Month (0CALMONTH) in data columns.
But, the data columns should be dynamically set to the 12 months of the Year I choose as part of the header combination. Example, I choose 2008 as header:
Layout should alow me to enter sales for all months of 2008. So, data columns should become:
Jan 2008 Feb 2008 Mar2008 Apr2008 .....
Sales
I'm open to ideas for other types of layouts also as long as the the months (0CALMONTH) are derived based on Calendar Year.
Thanks...

KJ, thanks for your response.
Dont mean to question your suggestion at all. But is that only way?
I mean to me deriving a calendar year month seems to be a normal practice.
But if thats the only way, could you please provide more insight and possibly an algorithm for the exit? never worked exits before in the cotext of BPS.
Thanks...

Dynamic Data Column

Hello!
I've a requirement such that based on data, dynamic columns should be created. I'm able to do this but looping in the rows is not working..
I've done a similar requirement before when all the data are in the same hierarchy but now, data are in different hierarchy.
This is my XML
<IND1>
<IND2>
<LABEL>Hello</LABEL>
<IND3>
<WT>30</WT>
<PRICE>45</WT>
</IND3>
<IND3>
<WT>20</WT>
<PRICE>35</WT>
</IND3>
</IND2>
<IND2>
<LABEL>World</LABEL>
<IND3>
<WT>15</WT>
<PRICE>45</WT>
</IND3>
<IND3>
<WT>25</WT>
<PRICE>36</WT>
</IND3>
</IND2>
</IND1>
There are 2 Labels.. So, 2 tables shd be created with heading as 'Hello' and 'World' dynamically. Below, 'Hello' label, there must be 2 columns 'WT' and 'Price' Headers. Respective data shd be displayed.
I'm able to create 2 headers and below that, WT and Price.. In my data, only the first record of WT and Price is displayed and 2 set of data is not getting displayed. I tried to loop but it's not working.
Let me know if you want more details. I will send out the rtf which I'm doing..
Thanks!
Ganesh.

I've sent a mail to you. Thanks!

Rdl file Tablix sorting. dynamical data columns.

Hi ,
we are having Tablix with 5 columns of data. in that first 3 column data is a static and remaining two columns data will be calculated and populated dynamically on the 4,5 column. it is working fine but when i sort the any of the first 3 columns it is showing
the wrong data in the 4,5 th columns.
can any one help how to over come this.
Advance thanks.
Vijay

Hi Vijay,
If I understand correctly, the values in the fourth and fifth column change dynamically based on the static values in the first three columns in your report. And then you set the sort expression for the data region or for each group, including the details group
in a tablix data region.
I tested the issue in my test environment in the basis of my understanding. I have set the expression in the fourth and fifth column and set the sorting of tablix based on the fifth static column. When running the report, there is no issue.
To resolve your matter, please post the report design and the expression in sorting option’s screenshot to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Dynamic Lead Columns / Data Columns

Hi
I want to use dyanmic data columns restricted by a characteristic relationship of another variable.
When I use the characteristic as a lead column, it works perfect, I only see the rows for valid lines.
When I use the characteristic as a data column, I see all possible characteristic values of that characteristics. The ones that are not valid are not ready for input, the ones that are valid are ready for input.
I would like to use dynamic data columns but only display the columns with a valid characteristic relationships (just the way it works when I put the characteristic in the lead column)
Should that work?
Thanks

Enable Zero-Suppression on your column structure. Then in your Query properties, enable zero-suppresion for columns. That way only characteristic values with data will be shown and not all possible characteristic values present in the master data tables. I should note that there should be some data in the fact table which links the keyfigure to the characteristic value, otherwise it will be suppressed.

Urgent : Problem in displaying 0fiscper as dynamic data col.

Hi SEM gurus,
I have a problem in displaying 0FISCPER in data columns. Say, in my planning level I have restricted 0FISCPER to 0001.2005 to 012.2005. and I did selected in data column, Dynamic for 0fiscper.
Now when I run my lay out for keyfig. 0Amount the lay out is like this
Customer Amount Amount Amount
Xxxxxx       10 20     30
Its not displaying the monthwhat I want in the lay out should be like this
         001.2004 002.2004 003.2004
Customer Amount Amount Amount Amount
Xxxxxx     10     20      30    40   .........
Can any one Please help me out to fix this ???
Thanks a bunch in advance
Rohith.
Message was edited by: rohith gentle
Message was edited by: rohith gentle

Rohith,
change HEADING column in the 2nd screen of the layout design to "0FISCPER Amount".
I think, current HEADING is named as only "Amount".
This will give layout as
Customer 001.2004Amount 002.2004Amount 003.2004Amount
hope that helps.
Hari Immadi
http://immadi.com
SEM BW Analyst

Get description of tables and columns

Good afternoon.
Is there any option in SAP B1 to get a description of table and column dynamically? That is, without the "Tools -> Queries -> Query Generator"?
I am developing an add-on, which lists all the tables and columns of the sap, and I have to bring the descriptions automatically. If you do not have to get the SDK route descriptions, as you suggest doing this?
Edited by: Harley Rodrigues on Feb 1, 2012 9:38 PM

Hi Harley,
Welcome to the Forum!
please refer to your SDK Help. you can find it from this path C:\Program Files\SAP\SAP Business One SDK\Help
also alternatively you can view it from your MS SQL Server Management under Databases
regards,
Fidel

How to create dynamic DataTable with dynamic header/column in JSF?

Hello everyone,
I am having problem of programmatically create multiple DataTables which have different number of column? In my JSF page, I should implement a navigation table and a data table. The navigation table displays the links of all tables in the database so that the data table will load the data when the user click any link in navigation table. I have gone through [BalusC's post|http://balusc.blogspot.com/2006/06/using-datatables.html#PopulateDynamicDatatable] and I found that the section "populate dynamic datatable" does show me some hints. In his code,
// Iterate over columns.
        for (int i = 0; i < dynamicList.get(0).size(); i++) {
            // Create <h:column>.
            HtmlColumn column = new HtmlColumn();
            dynamicDataTable.getChildren().add(column);
            // Create <h:outputText value="dynamicHeaders"> for <f:facet name="header"> of column.
HtmlOutputText header = new HtmlOutputText();
header.setValue(dynamicHeaders[i]);
column.setHeader(header);
// Create <h:outputText value="#{dynamicItem[" + i + "]}"> for the body of column.
HtmlOutputText output = new HtmlOutputText();
output.setValueExpression("value",
createValueExpression("#{dynamicItem[" + i + "]}", String.class));
column.getChildren().add(output);
public HtmlPanelGroup getDynamicDataTableGroup() {
// This will be called once in the first RESTORE VIEW phase.
if (dynamicDataTableGroup == null) {
loadDynamicList(); // Preload dynamic list.
populateDynamicDataTable(); // Populate editable datatable.
return dynamicDataTableGroup;
I suppose the Getter method is only called once when the JSF page is loaded for the first time. By calling this Getter, columns are dynamically added to the table. However in my particular case, the dynamic list is not known until the user choose to view a table. That means I can not call loadDynamicList() in the Getter method. Subsequently, I can not execute the for loop in method "populateDynamicDataTable()".
So, how can I implement a real dynamic datatable with dynamic columns, or in other words, a dynamic table that can load data from different data tables (different number of columns) in the database at run-time?
Many thanks for any help in advance.

flyeminent wrote:
However in my particular case, the dynamic list is not known until the user choose to view a table. Then move the call from the getter to the bean's action method.

A data table in one column of a dynamic data table

Hi , I have to design a dynamic data table(with dynamic columns and data) which looks as the following
DETAILS      NAME      ROLE NUMBER     CLASS     SECTION
15     MATHS     SURESH     15     10     A
20     SCIENCE
25     ENGLISH
15     MATHS     SURESH     15     10     A
20     SCIENCE
25     ENGLISH
The data in the column 'DETAILS' should have inner table. The data in this inner table should have hyper links. If there is no inner table infor mation there shold be an image with hyperlink. This data table should also have pagination and sorting features. Please send me some example code for this. Please help me out as i have client demo on monday

You may find this example useful: [http://balusc.blogspot.com/2006/06/using-datatables.html#NestingDatatables].
To toggle between a nested datatable and a hyperlink with image just use the rendered attribute. E.g.
    <h:column>
        <h:dataTable rendered="#{!empty dataItem.innerList}">
        </h:dataTable>
        <h:commandLink rendered="#{empty dataItem.innerList}">
        </h:commandLink>
    </h:column>
...

What is the best way to dynamically create table partition by year and month based on a date column?

Hi,
I have a huge table and it will keep growing. I have a date column in this table and thought of partition the table by year and month. Can any you suggest better approach so that partition will create automatically for new data also along with the existing
data? Nothing but automatically/dynamically partition should create along with file group and partition files.
Thanks in advance!
Palash

Also this one
http://weblogs.sqlteam.com/dang/archive/2008/08/30/Sliding-Window-Table-Partitioning.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Header description of dynamic data columns dynamically

Similar Messages

Maybe you are looking for