Change in Print Layout

Hello,
I am working on a interactive PDF whose Print Layout is different from the screen view of the form.
So what gets printed is different from what is seen on the screen. I have the Print Layout available to me.
Hope I am clear. Can this be done?
I am using Livecycle designer 8 and Acrobat Pro 8.

You can make objects visible only on the screen by selecting Object => Presence => Visible (Screen Only). You can do the same for printing by selecting the Visible (Print Only) option.
Hope this helps,
Mike

Similar Messages

  • Changing iCal Print Layout

    Hi
    When I print a calandar month, the month and year are top left on the paper so that when I hole-punch the page to stick in my filofax, the month has got a big hole in the middle.
    Is there a way of changing the print layout so that I can move the month a bit towards the centre ?
    Any suggestions very welcome. I hate it looking untidy !!

    I've been battling the lack of a "Page Setup..." menu in iCal for several hours, even after reading the fix above. Some of my conclusions and a tip:
    1. It seems that iCal 'gathers' the paper/printer info when it starts up. It is therefore a waste of time to set these dimensions while iCal is still running/open.
    2. Any app that allows access to the "Page Setup..." menu can be used to create/modify a custom/existing choice.
    3. It may be better to set up a 'custom' setting using "Any Printer" rather than any specific printer you may have.
    Perhaps the most important fact I discovered is that it is more important to set the paper dimensions than the actual margin numbers! iCal seems to prefer using a minimum margin setting regardless of what is defined in any "Page Setup..." item. But it will recognize and respect a slightly smaller page size and print within it. For example, my final success came when I re-defined the normal 8.5 x 11 inch paper as 8.25 x 10.75 inches! Just be sure to crate this as a custom, named setting so you can find and select it in iCal.
    BTW, I have not attempted other 'standard' paper sizes, just the 'full-size' version.
    Anyone have an idea why iCal ignore the GUI standards?! Or is simply another attempt at 'integrating' all apps; like using Safari to tell the OS to use another browser? What happened to Apple's 'user friendliness' mantra?

  • How can i change the print layout in i cal, how can i change the print layout in i cal

    Im a franklin planner user and would like to convert to ical.  How can I change the print layout in ical so I can print task on the left side and calendar events on the right side.

    Hi Mike3232,
    I'm afraid that it's not possible to adjust the print layout in iCal. Maybe you should think about changing to another program (BusyCal, etc.) that has the option to print the layout you want?
    Good luck!
    Michaël Duwyn

  • Limited Logistic cannot change open Print Layout Designer?

    Dear Experts,
    My customer has multiple Purchase Order layouts, they are using Limited Logistic user license and have full authorization to Change Default Report.
    However, when they click on the Print Layout Designer, the pencil icon from toolbar, an error message prompt, You cannot open Window [60213] Type List Form with your current license.
    Online License Authorization document that i have read does not provide details information about Limited Logistic vs Print Layout Designer.
    Can someone please advice me is it SAP limited logistic license design or is it a bug or is it some setting has been done wrongly?
    Thanks.
    Regards,
    Lay Chin

    Hi Gordon,
    The SAP Note No: 1223477 is indicating what happend last time. But for the new customers who start using SAP B1 8.8, when they purchases limited logistic, they get limited logistic license with the correct access right defined in https://websmp203.sap-ag.de/~sapidb/011000358700000953982007E, no more professional license is given.
    Below statement is quoted from SAP Support Portal:-
    New user types are now enforced
    The new user types that have been introduced in the SAP Business One pricing and licensing model are now enforced in the SAP Business One 8.8 application: The limited users and indirect users are implemented; the use of the add-on access user is re-defined (this user will now be a normal user).
    Please correct me if I understand the statement wrongly.
    Thanks.
    Regards,
    Lay Chin

  • Outlook 2010 change page print layout to A4 from letter

    We have an issue with Outlook 2010 showing print page layout as "Letter" by default. We require it to be default set as A4. How can we change that centrally through a GPO or even SCCM (script)?

    Hi Grafity,
    Have you checked the setting on the printer? Make sure the setting on the printer has been set as A4.
    Normally, a program uses the default document properties that are set for a printer, and the initial defaults for a printer can be modified by the administrator. When a user connects to the printer, the user's defaults are set to these global
    settings. For more information on setting the printing default preferences, see
    Set printing defaults.
    Note that changes made by an administrator after a user has established a connection to a printer have no effect on that user. For more information on setting personal printing preferences, see
    Set personal printing preferences.
    Max Meng
    TechNet Community Support

  • Change PDF print layout

    I am attempting to print multiple pages per sheet.  I have the option to customize the number of pdf pages per printed page.  However, if I were to choose any layout that is 1 across and any number down per sheet, the pages always print down the middle.  There is no way to print everything on the left side.
    For instance, I have a powerpoint that was provided to me as a pdf.  I cannot get the original and I would like to print this copy.  I would like the slides to print multiple per page down the left side, leaving the right side to write notes.  However, choosing multiple pages per sheet and then customizing the layout to 1x3 prints three slides in a column down the center of the page.  Is there a way to print them 3 in a column down the left side of the page, leaving the right side blank?

    Colum is pointing you to that because it tells you how to remove what you have referrred to as Chapter Layout and that item is in the third page of the wizard. I suspect however it is the TOC you want to remove. If you remove Chapter Layout in the wizard, you will not have any content.
    You can change the font with a different workflow. Generate to Word instead of PDF and you can change the style there. If you are doing this frequently, map to a Word template and amend the style in that.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Acrobat ignores my PowerPoint Print Layout Notes Pages view and gives me regular slides PDF.

    I have written a presentation in PowerPoint in the usual PowerPoint slide view.  Now I want to print the presentation as a manual or booklet.
    For this I go to the Print File Print page.
    I select Print Layout > Notes Pages and click Print.
    Acrobat creates a PDF only of the Full Page Slides. It ignores my change of print layout before creating the PDF.
    I have tried printing to file (PostScript  *prn). The prn is the slides view.
    I could maybe create an image of every slide, and try pdfing it that way? But the file is 100 (slides) long.  Anyone see an easier way of doing this?
    Thanks in advance for any input,

    Based on your description, I assume you are running on a Windows system with both Office and Acrobat installed.
    There are three ways of producing PDF from PowerPoint in this situation.
    The first method is to use the Save as Adobe PDF / PDFMaker solution that doesn't involve printing at all. It produces the highest quality PDF of all three methods, but the options for this allow the notes only to come out as PDF annotations in a separate,hide-able layer, not as the full Notes Pages format, regardless of the current settings for displaying the PowerPoint file on screen. You can see the annotations in comments pane in the comments tool. This isn't what you want.
    The second method is to use the Microsoft Save as function and specify PDF instead of a .PPT or .PPTX file. If you press Options, one of the options is to publish the Notes Pages instead of just the Slides. That will give you what you want, but Microsoft's generated PDF is somewhat wonky, often generating invalid PDF with improper font references and other problems too numerous to get into here.
    The third method is to print to the Adobe PDF PostScript printer driver instance. The secret here is that under Settings, instead of selecting the default Print All Slides, you need to select Notes Pages. In other words, the print function ignores the view you currently have on the screen. The only problem with this approach is that the resultant PDF file is not nearly as high a quality as the PDF produced by Save as Adobe PDF, but it should probably be sufficient for your needs.
    That having been said, I will submit a request internally to “beef up” our Save as Adobe PDF to provide an option for the Notes Pages as an alternative to putting out the notes as annotations.
    Please advise if this solves your issue.
              - Dov

  • Can any body tell me how to make changes in the print layout of Fb03.

    hi,
    Can any body tell me how to make changes in the print layout of Fb03.
    I want to add comapny address on the layout.
    Regards
    Mave

    If you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
    If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
    Good luck,
    Bhanu

  • Want to change the design of a report in query print layout

    i want to change the design of a report.

    Hi om singh,
    You can also find more information with recorded video at the following place:
    SAP Channel Partner Portal->Education->Role-Based Training->Implementation Consultants->Customization-> Print Layout Designer Part I,II,III
    http://service.sap.com/smb/sbo/documentation->choose the B1 version youu2019re using->Print Layout Designer
    Hope it helps.
    Regards,
    Jacqueline Jiang
    SAP Business One Forums Team

  • Dunning Report Print Layout Issue

    Hi
    I have a problem with the Dunning Report Print layout (Dunning All (system)). In the wizard I select all the Invoices (Which are over due and current) for the BP and sent to printer.
    In the print out all the due dates are mixed with the acctual Due dates.
    Acctuall Invoices
    Doc No.                  DOC Due            Level
    ======================================
    10000                     05.11.07              2
    10001                     25.02.08              1
    10002                     03.03.08              1
    10003                     03.04.08              0
    Print out
    Doc No.                  DOC Due            Level
    ======================================
    10000                     05.11.07              2
    10001                     03.03.08              1
    10002                     03.04.08              0
    10003                     25.02.08              1
    How can I fix this. This is coming from the System template and we havent change anything.
    Could you please help me.
    Thanks
    Sanjaya

    Hi
    I solved the problem. But the issue was when i ran the dunning wizard the layouts messed up. For example if I had a dunning letter with 3 lines (overdue documents). The last line would copy itself 4-6 times (it would show the last document 4-6times so the total lines in the dunning letter would be 7-9 lines). But I solve the issue. Somehow the attention person (which I got from the contact persons (ocrp) and not from the document contact person (oinv) ) did the issue. When i switch it to the oinv the issue was gone.
    kind regards
    Søren
    Edited by: Bundgaard Søren Hollænder on Jan 26, 2009 9:56 AM

  • Help me . Query in " Query Print layout Design "

    Hi Everybody .
    I Design Report by Query Print layout Design , So when I run Report , I see Message : " Table not found Administrator (OA DM)" .
    This is My Query .
    ( Note :this  Query is run ok in Microsoft SQL  . )
    Select Cast(left([dbo].[Get_rate](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType),5)       as nvarchar(50))+ Cast(T0.BatchNum as nvarchar(50))As No_Number    ,  T0.TaxDate As Date       ,     case left(T0.Account,4)when '1112'then '0.00'     when '1122'then'0.00' else           [dbo].[Get_11](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType)end  as Amount1              , case left(T0.Account,4) when '1111'then '0.00' when '1121' then '0.00'           else [dbo].[Get_111](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType) end  As Amount2            , T1.U_VNS_MEMO  As U_VNS_MEMO, T1.U_VNS_VNUMBER as PV_No    , T1.U_VNS_JType as 'Voucher Type'         , T0.Account  As AC_Code    , T3.AcctName as Description  , T0.Debit As Debit ,T0.Credit As Credit        , T1.U_VNS_NAME,     T0.U_VNS_REMARKS   From BTF1 T0                Inner Join OBTF T1 On T0.BatchNum = T1.BatchNum               Inner Join OBTD T2 On T0.TransID = T2.BatchNum                Inner Join OACT T3 On T0.Account = T3.AcctCode                    Where  T0.BatchNum = '[%0]'  Group by   Cast(left([dbo].[Get_rate](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType),5)       as nvarchar(50))+ Cast(T0.BatchNum as nvarchar(50)) ,  T0.TaxDate   ,       case left(Account,4)when '1112' then '0.00'     when '1122'then'0.00' else           [dbo].[Get_11](T0.BatchNum,left(Account,4),T1.U_VNS_JType)end             , case left(Account,4) when '1111'then '0.00' when '1121' then '0.00'           else [dbo].[Get_111](T0.BatchNum,left(Account,4),T1.U_VNS_JType) end            , U_VNS_MEMO  , T1.U_VNS_VNUMBER    , T1.U_VNS_JType       , Account     , AcctName       , T1.U_VNS_NAME,     T0.U_VNS_REMARKS      order by  Amount1 desc
    Please help me .
    Thank you very much .
    Message was edited by:
            Tran Ba Hai

    Note: This Quey if I change = [%0] by = 1 ,  and I run Report in SAP is ok .

  • Problem with Query Print Layout

    Hi, i have this type of problem.
    I have create a query with 5 fields,i have saved it, and ,after, i have created a report on this query (Query Print Layout).
    So, i have manipulated the report based on the preferences of the customer.
    After this operation, customer tell me that he want to see one more field in the report, so i must add, in the original query, this field. But i note that i can't add a field. I can do it, but i must remake all the report.
    There is a way to do this type of operation, without remake the report from the start?
    Thanks
    Regards
    Marco

    Hi Marco:
    I asked our Print Layout Expert, and she tolds me that you have to create the report again.
    Some time ago, in the report designer was a  way to change the link to the query, but that option is disable now.
    So, be patient and ask for this functionality to be implemented.
    Harold Gómez V.

  • Default Query Print Layout problem

    Hello:
        I have a query below SELECT T0.[ItemCode], T0.[Dscription], sum(T0.[Quantity]) as 'Quantity' FROM INV1 T0 WHERE month(T0.[DocDate]) =month([%0]) AND  year(T0.[DocDate]) = year([%0]) and T0.[ItemCode] IS NOT NULL GROUP BY T0.[ItemCode], T0.[Dscription] ORDER By T0.[ItemCode].
        Which basically output monthly inventory invoiced qty. It works fine. However when I try ti link to the default system print layout and try to print. The column 'quantity' become very small and cut off most of the number. How do I make it bigger? I have been trying to modify it for quiet a while now. Nothing seems to work. I think it's length is preset base on the column lenth in the table! If that's the case how do I make it wider?
        Also the default layout for user query are pretty weired. I think it's dynamically allocating spaces depends on number of column. But what happens when you do functions such as sum, avg..etc. There is no present length. So they just disregard it?
      Any help will be appreciated.. Thank You
    Sincerely Yours
    Bo Peng

    Hi Bo,
    I am asuming that u are not yet familiar with how to work with PLD (Print Layout Designer). I would suggest that u see some tutorials from the following link and then try to change that default layout according to ur own requirements
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/51c19891-0901-0010-6eb1-e71abf09298a
    Reagrds
    Rizwan Hafeez
    Team Lead
    SAP Addon Development Section
    Abacus Consulting - Pakistan

  • Query Print Layout / Query Manager

    Hopefully some one here can help me out ...
    I have created a handful of Query Print Layouts.  How or is there a way when I make a change to the underlying query, to reassociate it with the report?  Now when I change the query,  I have to create a new report.  I am currently on SAP B1 2007 PL11.  When I upgraded from PL06 to PL11,  the queries handle prompted dates differently, causing me to have to make a simple syntax change to my query which does not change the data being passed to the report.
    Thanks in advance
    Dana

    Dana,
    This is the short-coming of the Query PLD.  Once you change the Query, you will need to redo the template all over again.
    Therefore, it is a good practise to always finalize the query and then design the layout.
    Re-assigning the revised query to QPLD is not possible
    Suda

  • Print Layout Designer - inconsistent output

    Hi,
    We have received consistent compaint from our client that the output of Print Layout Designer are inconsistent.
    Eg: The same PLD template is used for An invoice print out from 2 different workstation.  However, workstation A display the format properly, workstation B will have missing lines between boxes or the alignment is not displayed properly.
    We have also recently encountered the problem that our client export the invoice to Acrobat and then print it.  However, it displays properly for workstation with  Acrobat version 8, 9, but missing lines for version 7.
    Another scenario could be the form is displayed properly on the screen, but the physical print out to a printer is not consistent. 
    We really appreciate some share of thoughts here.  Is switching to other report writer, eg: Crystal Report, the only option?
    Edited by: Shwu Hua Gan on Aug 10, 2008 2:57 AM

    Gordon,
    Thanks for replying.
    This is what happen to our client.
    The font size of the customised PLD SAP Invoice is size 5.  In order to preview the layout, they have to preview in PDF, once they are happy with the details and then print.
    In some workstations, there are Adobe Reader version 8 or 9.  In a couple of workstations, there are Adobe Acrobat version 9.
    Let's say, there are 2 fields with the following properties:
    Field A, Left = 0, Width = 10.
    Field B, Left = 10, Width = 10.
    Adobe Acrobat version 9 display the border of the field properly.  However, those with Adobe Reader 8 / 9 will see gaps between fields.
    If we change them as follows the field the gap;
    Field A, Left = 0, Width = 10.
    Field B, Left = 9, Width = 11,
    Then those with Adobe Acrobat version 9 is missing the border for because Field A overlaps with Field B.  But Adobe Reader 8/9 will print fine.  It also works fine if user click 'Print Preview' as normal and then click 'Print'
    Does anyone knows whether this inconsistencies is caused by
    - printer drivers; or
    - Adobe; or
    - SAP Business One.

Maybe you are looking for