Change in tax %

Hi ,
Will any one help to find out following requirement.
Tax percentage in one tax code(tax code V1) seems to be changed in FTXP to 17.5%.If I want to check earlier tax percentage and date on which it was changed in which table I can get it.
Thanks & Regards
SAP learner.

Hi,
You can go to FV13 and the condition type execute then go to enviornment click changes history it will shows all the changed done with this input.

Similar Messages

  • Unable to remove/change sales tax in sales order

    Hi Sappers!!
    I are unable to remove sales tax from a sales order.  I have tried to update the sales order by clicking on Header>Conditions Tab>Update-->Double click on G to redetermine the taxes.
    The sales order was entered the same day the Vertex record was input.
    Appreciate your pointers and time!!

    Hi,
    If you want to remove the sales tax from sales order,
    first of all  goto FTXP, give the country, for which you want to change the tax code percentage, and give the tax code and press enter, there it will show existing the tax percentage for that condition type (say earlier it was 10%). Now you want to make it 0% then remove 10 and put it as 0 and save it.
    Next goto condition record VK12 maintaine new tax percentage which you want to change. Like earlier 10% was there but you want to make it as 0%, then maintaine in VK12 tax condition record.
    Now goto your sale order in change mode VA02, and update the procedure using G, then the new tax willbe reflected i.e., 0% will come.
    Hope this is clear
    Reward if helpful
    Thanks
    Praveen

  • Change the Tax Code-  In Sales Order i have  Tax code for VAT

    In Sales Order i have  Tax code for VAT ( Condition type JIVP) it is reflecting "P4" instead of "A4".
    Where the "P4" Tax code is picking in Sales Order.
    How to change the Tax Code.
    Urgent

    Hi CHAKRI,
                     Check if the condition record is maintained with the appropriate taxclasssification.If yes, Go to sales order in change mode,then goto-header-billing-alternate taxcalssification and modify tax classification.It will pick up right tax code.
    Regards
    Ram Pedarla

  • FM for changing vendor Tax information

    Hello,
    is there any FM for changing vendor Tax information?
    Thanks,
    Moshe

    read data with VENDOR_READ and update desired date with VENDOR_UPDATE

  • Automatic update of Tax on change of tax driver  in SRM SC and PO

    Hello Experts,
    I ma facing one issue in Extended Classic secenario.
    At the time of creating the SC or PO the tax is calculated from the Vertex . So i already did a setting of calculted Tax in the Backend.
    Now when we create SC or PO the tax is calculated but once the document is created and we cahnge the Tax option form one to another Say form As US 4% to Vendors tax 5% ....So my system is not re-calculating the tax.
    We need to Automatic update of Tax on change of tax driver on SC and PO. Presently this is not a trigger for recalculating tax.
    Smriti

    Closed..

  • Restrict changing the tax code in purchase order after goods receipt.

    Hi,
    Po is created with tax code x1.
    Gr is done for partial quantity.
    IR is still pending.
    User has changed the tax code to x2.
    This case we want to restrict the tax code change in PO after goods receipt.
    Please advice.
    Regards
    Ravi Kumar

    Hi Sumit,
    Po created with wrong tax code x1.
    Stores person has done the receipt and consumed the stock.
    Now user has suddenly realised that tax code is wrong and changed the tax code in PO.
    In IR we will use correct tax code and post the accounting entry.
    Stock values will be adjusted properly. to stock ac if stock is there and to price diff ac if stock is consumed.
    Point is user's are asking that how system is allowing to change the tax code after receipt.
    Point to be attended is restrict the change of tax code by any means after Gr has happened.
    what are the possibilities to restrict the change of tax code.
    Regards
    Ravi Kumar

  • Change the tax code issue in fs00

    Dear Sapgurus,
    in production i create one g/l code user id : mydr123 T code is fs00 g/l code number 300000 account name is sales, account group is p&l and account currency inr, tax category ">" , now i am going to change tax category * while saving the g/l system is not accepted  itsshowing error message "     1) Changing the tax code not possible; account has a balance
    2) The data contains error, you cannot save, but if i choose"-" its accepted please tell me
    Regards
    Myfriend

    Hello MyFriend,
    If you wish to make a direct posting to a tax account you must have
    the gl account active in transaction MIRO.
    Please review the online documenation located via help -> sap
    library -> materials management -> logistics invoice verification ->
    Direct postings -> direct posting to gl account
    here you can see the setttings for same in customizing are
    Setting in Customizing for Logistics Invoice Verification
    As per error message FH081, it arises only if the account had perviously
    the tax category ">" or "<". They cannot be changed anymore
    if the account has a balance. The tax categories "-", "+", "*" etc.,
    can be changed, you will get in FS02 only the warning FH011.
    Please check GL account xxxxxx with FBL3N, to see if there is a balance
    still left. To make the account balance zero, you might try transaction
    FB41, this allows you to post directly a balance to the Tax gl account
    even when the flag "Post to automatically" is set.
    I hope this helps
    Regards
    Ray

  • Changing the Tax Code in the GL Master

    Hi Friends,
    The users have created a GL Account with only 'Input Tax' allowed in posting. Now they want the 'Output Tax' also to be activated. When we try to change the Tax Code to allow all types of Taxes, the system gives an error message - "Tax Code cannot be changed as the postings exist". How can we change the Tax Code now? Is it that we have to nullify the balance in this account?
    Thanks for the help.
    Regards

    Hi,
    According to me, if you change the error to warning, it wont affect any previous postings but it will allow to extend the tax code to further future postings which is required. So i don't think so that it will affect your existing postings.
    Regards,
    Jigar

  • Change to tax on sales contracts

    i need to change the tax on trade waste contracts from 20 % to zero rated  - these contracts are set up for 10 years and we are a number of years in so there are subsequent billing docs - how do i update all these contracts to reflect this change - the materials have been updated to 0 sales tax from 1 .. 
    any info would be great thanks

    Hi,
    1. check how the  tax condition type is getting determining in to the item conditions. If it is depend upon the combination of tax classification of material and tax classification of customer you can change the combination in the sale document header (customer tax classification) and Item (material tax classification). Then automatically the tax value redetermine the document conditions.
    2. While coming to the release order means suppose if you have a Quantity contract , you need to create a sales order w.r.to your contract. This sales order we will call as release order for contract.
    Thanks
    BVDV

  • Changing the Tax Percentage with an effective rate

    Hi,
    We are going to have new tax percentage w.e.f. 01Jan2008. And we are having a few conditions to be maintained basing on that future tax rate. Can somebody help me in changing the tax rates effective from a future date.
    Thanks & Regards,
    Raghava

    Hi,
    According to me, if you change the error to warning, it wont affect any previous postings but it will allow to extend the tax code to further future postings which is required. So i don't think so that it will affect your existing postings.
    Regards,
    Jigar

  • Customer invoice - change of Tax classification required

    Hi, I wonder if you can help with a query. For most customers we invoice outside the UK, we charge a VAT rate of 0%, which is linked to a tax classification in the customer master record (via XD03). In certain scenarios, we have to charge VAT for the same customer, for example if a training course is carried out for a foreign customer but the training takes place in the UK, we have to charge the UK standard rate of 17.5%. The way we have always achieve this, is that when we know we are going to invoice, we would change the tax classification in XD02, and then update the conditions tab on the sales order. This would in turn update the MWST percentage and allow us to charge the VAT, for this sales order only. The customer record would then be changed back to the previous code, once the invoice was issued.
    For some reason this now no longer works. We have checked that the tax rates are set in VK13, and this all appears to look ok. The material codes in the sales orders have not been amended in any way so I do not think this is an issue.
    This issue only seems to have occurred over the last few months.
    Can anyone think of why?

    Don't you feel the procedure you are following little to complicated for user when these can easily be determine through Condition record.
    I would suggest, you can have 2 different sales area for the training sales in UK and outside (OT) sales.
    Then, VAT tax classification
    VAT - 0 - Not liable for Tax
    VAT - 1 - Liable for Tax
    And say, OT is your existing Sales area for the master data with tax classification VAT - 0 - Not liable for Tax. Then you to extend the customer master for UK sales
    Sales org - Distri Channel
    1000 - UK and there you maintain tax classification as VAT - 1 - Liable for Tax.
    Here, we assume material tax classification is UK as VAT - 1 - Liable for Tax and OT is VAT - 0 - Not liable for Tax.
    Now  add an access to access sequence, say, Sales Org/ DC/ TaxClass1-Cust./ Tax class. material.
    And maintain the condition record in VK11, say,
    Not Liable for Tax - 1000 - UK - 1 - 1 = 17.5%
    Liable for Tax - 1000 - OT - 0 - 0 = 0 %
    And accordingly create you sales order with respective sales areas, w/o much manual intervention.
    Hope this can assist you.
    Thanks & Regards
    JP

  • Formatted Search that will change the Tax code in SO.

    Hi All,
    I have a requirements that will allow me to change the Tax Code column via formatted search. Like for exmaple, i have 50 line items in SO and the tax code is ZO. If i want to change the tax code, i will select it for individual items. Anyone can help me to have an alternative solution that will prevent me to change it per item.?
    thanks and regards,
    vin

    Hi Melvin........
    You can have a work around for this....
    Just create a UDF say U_Tax at Header level...
    Just Create a FMS for Tax Code say..
    SELECT *  FROM OSTC T0
    Save this tax code FMS to thus UDF.
    When yo select a particular Tax Code in this Field through this saved FMS
    this Tax Code gets copied to each and every line say for 100 lines also.
    For this you have run other FMS which is below...
    SELECT $[ORDR.U_Tax.0]
    Save above FMS in tax Code field say in Sales Ordr form.
    Now when you do this you can see if you have 100 line items and you want to copy same tax code in a single click you have to just select single tax code via FMS in U_Tax as i suggested.
    The moment you select this Tax Other FMS will be fired and the same will be copied to other 100 lines....
    Hope this will help you.....
    Regards,
    Rahul

  • How can I change the tax formula in system form ?

    Hi,
      Usually the tax is extra-added for 5% in calcaulating.
      But now I need to change the formula of tax to be embeded.
      How can I change the tax formula in system form ?
                                           Besr regard!

    Great!
    I suppose "Speed-button" is the same as "toolbar button", right?
    To all (more or less):
    It confirms that I am on the right track when I bother the participants in this forum time-after-time with remarks to train themselves - or get trained - in application + customization features (+ SDK).
    Of course as developers we can use the SDK for whatever purpose and try to develop additional functionality - ... that might already be there, but we just don't know about it
    In addition the power of customization features (UDFs/UDTs/queries/formatted searches (also bound to fields on SAP Business One forms)...) should not be underestimated!!!
    When starting development with SDK you - or the person who writes the specifications for an Add-On must IMHO be familiar with the application + the customization features + being trained with SDK to avoid unnecessary development or getting into trouble latest when the solution is shipped to a customer...
    Please again note that there's a lot of eLearning available in the education area in the SMB Portal on SAP Service Marketplace.
    Regards,
    Frank

  • Mass changes of TAX code in SRM Enterprise buyer

    Hello experts ,
    The TAX code in our country was change from 15.5% to 16.5%.
    We all ready cerate new tax code in SPRO and we need to know what in the best way  to change the tax to ten new one in POu2019S that all ready in process.
    We want to process it as mass changes.
    Pleas gave some advice
    Regards
    Gil shinar

    Hi,
    I dont think there is any mass update function in SRM. This kind of change is generally managed through Business Process Change Management. The old purchase orders should be picked up and updated manually when you cutover to the new tax code.
    Moreover, as the tax calculation is generally done in an external system(Tax system) or in SAP R/3 , why dont you think of changing the tax percentages under the same tax code and drop the idea of creating a new tax code.
    Regard
    Virender Singh

  • Change the tax code at order header level that reflect the change in all it

    Dear consultant,
    Change the tax code at order header level that reflect the change in all items lines under this order
    Facts:
    Define tax code,
    Assign it to bill & ship to customers,
    I do all setup in oracle receivable guide for defining tax
    Examples: I navigate to order management to create order
    First I select the customer and order type after that I navigate to tab line
    I enter the item in the first line the tax code coming by default
    I enter the second items line also the tax code coming by default etc three ,four, five until line 40
    Now I want to change the tax code for all items but not by enter and change it in each line? No,
    I want the way that I change Tax Code at order header after that the change is reflect in all items line
    Business Impacts:
    Suppose I create order include 40 items , I want to change the tax code that coming by default , that require me to enter in each line to change tax cod 40 times ,this not logic and not acceptable from my customer

    Hi,
    The defaulting rules apply only for the first time when you are adding new lines on to the Sales Order. Respective field vaues will be defaulted from the SO header level.
    In case, if you want to update all the 40 lines for Tax Code in one shot, then please select all the lines on the sales order, try Mass Change.
    (Navigation: Tools->Mass Change).
    Regards,
    Hemanth

  • Need to change sales tax from point of sale to point of delivery

    Hi all,
    Recently the tax laws were changed such that sales tax is to be collected based on where the product will be delivered to (rather then where the product was sold from).
    Briefly we are an agency with mulitiple divisions, and within those divisions several sales offices.  Previously, a sales would be made from the sales office, and based on the tax rate for that division and sales office (county/city) the sales tax would be calculated.
    Now we need to shift that so that a sales can still be made from a division/sales office, but the collected tax is based on where the product will be delivered to. 
    I'm sure there is a way to set this up, but I'm at a loss as to where to start. 
    One of teh options the customer suggested was to have a sales area set up with all the cities and tax codes in it.  Then assign that sales area to each of the sales offices.  Is this possible? Or do you have to have a separate sales area for each sales office?
    I'm open to any suggestions you may have as I'm not very familiar with this side of SAP (sales distription and taxes).
    Thanks in advance for your thoughts!
    Laurie

    Thanks Bill.  As it turns out, we are in the US where jurisdiction is an option I guess so this procedure may not be needed.  As I dig further it appears we are currently setup to use TAXUS procedure which utilizes tax codes - a limited number.  But since the recent change, we may need to switch to TAXUSJ. 
    Does this ring a bell for anyone?  If it is what we need to do, what need I be aware of that will change in the rest of the system?
    Thanks for your answers so far!
    Laurie

Maybe you are looking for