Change message in display message to user dynamically?

I want to have the Display Message to User vi pop up and notify the user that the computer will reboot in x number of seconds, where x is constantly decreasing. Is this possible? I have tried sticking it in a for loop and the message won't change without clicking on the button. Also, when the time does reach zero, how can I have it destroy that pop up box?

you can't use Display Message unless you convert it to a normal VI and do a lot of modification. It simple though, to create your own pop-up that does what you want. Look at the subVI in the attached file. It uses the Elaspsed Time function to create the time left and the window appearance properties to show and then close itself. There are also some shipping examples on creating your own dialog box or pop-ups.
Attachments:
Pop-up Demo.llb ‏64 KB

Similar Messages

  • Message to display in MIGO user exit

    Hi everyone,
    I have used a User Exit EXIT_SAPMM07M_001in migo for automatic batch generation, the problem is that when I give the message in the user exit it does not pop up the information.
    E.G. message 'Batch is xyz' type 'I'
    also i have tried to use the function module POPUP_TO_CONFIRM but this also does not give a pop up display.
    How can I go about giving a message popup in MIGO .
    regards
    Yao Chhang

    Maybe it's not running the code in the exit.
    You can check this by add some lines to a logfile on the application server for testing purposes.
    data: l_dataset type string value '/export//intf/abaptemp/zzhstest0001.txt',
          l_string type string,
          l_string2 type string value '**********************************************'.
    open dataset l_dataset for appending in text mode encoding default.
    l_string = 'Test 1'. transfer l_string to l_dataset.
    concatenate sy-Datum sy-uzeit sy-uname into l_string. transfer l_string to l_dataset.
    l_string = l_string2. transfer l_string to l_dataset.
    close dataset l_dataset.
    Run the program.
    Check the logfile.
    regards,
    Hans
    Please reward all helpful answers !!!!!

  • Change the dashboard  display menu to users?

    Hi all..I have a dashboard group (name:sales) with 3 dashboards(a,b,c) in it...However...When I login withe Admin previlages, I can see the dahsboard names one below the other under "sales"
    but when my users Logon to Answers..They are viewing dashboard names a,b,c side by side instead of a group..
    My user would like to see the dahsboard names a,b,c one below the other ..grouped under "sales"
    Please suggest

    Hi..I didnot understand what you said..
    Heres is my question..
    In this following picture..If you click on 'SUpply Chain; You were able to see a menu of Dashboards(Inventory..Supplier Performance Etc)) under that folder...
    When I login with my ID which has admin previlages..I was able to see same structure..
    But My users, who have access to only 'Supply Chain' were not able to view the dashboard menu Inventoryy, Supplier Performance,Procurement and Spend
    dashboards one below the other, just as in pictire.......Instead, they are viewing them side by side...but not grouped under 'Supply Chain'..
    http://img101.imageshack.us/img101/7903/dbsf.jpg
    Please help..

  • HOW DO I CHANGE THE FONT OF "Message to Display" IN THE Prompt User for Input

    Hi,
    HOW DO I CHANGE THE FONT OF "Message to Display" IN THE  Prompt User for Input?
    Thanks for your help 
    XN 

    Right click and select Open front panel >> Convert.
    Change the vi as you need. then you can save it as a normal sub-vi.
    If you have Labview 8.6, maybe (i am not sure) you can edit the express vi. Express vis are supported in 8.6

  • Dynamically display messages in JTextArea

    Hello everyone! I have a problem with my code so i hope someone can help me out. I am not very advanced to Java but i have to create a chat program. My problem is that i dont know how to display messages from different users into my JTextArea. I haven`t connected my program to a server yet because i am still working on the interface.
    So how can i display dynamically messages so that it looks like an interactive chat window. Here is my code.
    Please bear in mind that i will use only a username not a password.
    Thanks
    import java.awt.*;
    import javax.swing.*;
    import java.awt.event.*;
    import javax.swing.JFrame;
    import javax.swing.JTextArea;
    import javax.swing.JTextField;
    import javax.swing.JScrollPane;
    public class Jchat extends JApplet implements ActionListener
         JLabel label1 = new JLabel ("Welcome to ... CHAT");
         JTextField write = new JTextField(30);
         JTextArea output = new JTextArea(10,35);
         JButton button1 = new JButton("Send");
         JButton button2 = new JButton("Clear");
         Container con = getContentPane();
         Font headline = new Font("Georgia", Font.ITALIC, 18);
         JScrollPane scroll = new JScrollPane(con,ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
         JScrollPane scrollOutput = new JScrollPane(output);     
         public void init()
              con.setPreferredSize(new Dimension(700,400));
              label1.setFont(headline);
              con.setBackground(Color.gray);
              con.setLayout(new BorderLayout());
              con.add(label1,BorderLayout.NORTH);
              con.add(output,BorderLayout.CENTER);
              con.add(write,BorderLayout.SOUTH);
              con.setLayout(new FlowLayout());
              con.add(button1,BorderLayout.EAST);
              con.add(button2);
              button1.addActionListener(this);
              button2.addActionListener(this);
              write.addActionListener(this);
              write.requestFocus();
              //cannot change text in the text area screen
              output.setEditable(false);
              output.setLineWrap(true);
              //scrollOutput.setVerticalScrollBarPolicy(38);
              setContentPane(scroll);
         public void actionPerformed (ActionEvent e)
              Object source = e.getSource();          
              if (source == button2)
                   write.setText(" ");
              else if (source == button1 || source == write)
                   String input = write.getText();
                   con.add(output,BorderLayout.CENTER);
                   output.setText("User says: " + input + '\n');
                   validate();
    }and the other one
    <html>
         <head>
              <title> </title>
         </head>
         <body>
              <APPLET
                   CODE="Jchat.class"
                   WIDTH=500
                   HEIGHT=300>
              </APPLET>
         </body>
    </html>

    the border layout declaration has nothing to do with my question.Maybe not, but at least it would should that you took the time to read the suggestion.
    And what you advised me to use TextArea.append(...); is not very specific.Well, neither was your question, so I gave the best suggestion I could. If it wasn't helpfull, then I would assume you would post a followup question to clear up the confusion.
    setText(...) replaces all the text in the text area.
    append(...) adds the text to the bottom of the text area.
    If you didn't understand how/why to use the append(...) method why would you create a new posting? Would you not post a followup question in the original posting? Are we supposed to be mind readers and guess that you can't read the API to determine how a method should be used?
    Of couse maybe I don't understand what you mean by "interactive chat", in which case reposting a question with the same wording won't help get the problem solved either.

  • Edit error message as displayed when browsers fail to display dynamic pdfs

    I'm sure many people here are aware of the problems that arise when many browsers attempt to open a dynamic writable pdf. The built in plugin that ships with most browsers is unable to display the content, and as a result the following message is shown.
    "If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.
    For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader."
    (I trimmed a bit because the message is quite long)
    My question is, is there some way to modify the message above by editing the pdf using a program like Adobe Livecycle or Acrobat Pro? The message that displays is basically useless, because the problem is actually due to the browser's inability to display the pdf. If it is possible to replace this message with something more meaningful, such as instructions on downloading the form with right click, that would be fantastic for the users.
    Does anyone know where this information is stored? It doesn't seem to be browser specific (as the browsers I've tested seem to display the same message).

    I got the error messages to work from properties file and some helper class, but not through just defining in faces-config or web.xml.
    I am sure there is a better way to do but hopefully this will help you.
    FacesContext context = FacesContext.getCurrentInstance();
    In my validation method - I have the following code, which will associate
    the appropriate message
    String failureMsg = ErrorMessages.getString("SignUpData.NO_USER_NAME");
    FacesMessage message = new FacesMessage(FacesMessage.SEVERITY_ERROR,          failureMsg, failureMsg);
    context.addMessage("login_form:username", message);     
    My properties file - errormessage.properties - have the following info
    SignUpData.NO_USER_NAME =Please Enter User Name
    SignUpData.NO_PASSWORD =Please Enter Password
    Helper class - ErrorMessages.java
    import java.util.MissingResourceException;
    import java.util.ResourceBundle;
    public class ErrorMessages {
    private static final String BUNDLE_NAME = "com.path1.path2.resources.error_messages";
    private static final ResourceBundle RESOURCE_BUNDLE = ResourceBundle.getBundle(BUNDLE_NAME);
    private ErrorMessages() {
    public static String getString(String key) {
    try {
    return RESOURCE_BUNDLE.getString(key);
    } catch (MissingResourceException e) {               return '!' + key + '!';
    I am also looking for a way to avoid all this extra helper classes if there is a better alternative.
    thanks
    ponni

  • How to block displaying message "Save changes to file 'Test1' " in BEx?

    Hello, dear colleagues!
    Do You know how to block displaying message "Save changes to file 'Test1' " in BEx?
    I need some BEx setting which can block it and make it the same way as You close common Excel workbook without any changes made to it after opening e.g. without any messages, just clicking the cross. 
    Thank You all very much in advance!
    Val
    Edited by: vtb777 on Nov 21, 2011 1:46 PM
    Edited by: vtb777 on Nov 21, 2011 1:50 PM
    Edited by: vtb777 on Nov 21, 2011 1:52 PM

    from time to time i am working with macroses, but they are not good for the report's reliability.
    maybe You have some example of such macros?
    UPDATE:
    I have tried to edit event, called WorkbookBeforeClose in module BExEventHandler, adding there such a line:
    Application.DisplayAlerts = False
    but no result. maybe there are some other ways of solving this problem?
    Edited by: vtb777 on Nov 22, 2011 6:26 AM
    UPDATE-2:
    I got such a code, but it doesn't work:
    Private Sub Workbook_BeforeClose(Cancel As Boolean)
    If MsgBox("Save changes to file? " & Name, vbYesNo, "") = vbNo Then
       Cancel = True
    End If
    End Sub
    Edited by: vtb777 on Nov 22, 2011 11:07 AM
    Edited by: vtb777 on Nov 22, 2011 11:16 AM
    Edited by: vtb777 on Nov 22, 2011 11:20 AM

  • Display messages to user

    Hi i'm new working with labview, i have been made an aplication with express tool vi output called "display msg" and when i run the program in "run continuosly" the message window dont close when i push "ok" i want to know if there is a way to disable the message window when i push the bottom "ok" ? 
    Solved!
    Go to Solution.

    yes mi code simulate a temperature regulator and i use the express tool vi display messages to user for warning about the maximum temperature and minimum temperature, i attached the vi
    Attachments:
    temperaturalabview.vi ‏40 KB

  • When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?

    When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?

    I use message and all other messages are non-sms. When I try to message these two accounts, they automatically use sms, everything I do is the same. The non-sms messages go through just fine (including pictures). The sms messages (no pictures) are always rejected; they have never gone through. They have never been able to send messages to me either (although they can send to others). I have a Verizon cellular data plan.

  • Need to displaye message "User created successfully" after creating user

    Hi,
    I need to display message "User created successfully" after creating a user in OIM i.e after clicking on create user button, thie message should be displayed. Please guide me in this regard.
    Thanks.

    Hi,
    In ideal situation when you create an user and user gets created successfully the user profile page displayed.
    Now, if you want to show your message on top of that then you need to customize the Create User jsp.
    If you want to show new screen with required message then you need to create an custom screen,action class and some modification in struts framework.
    Regards
    Alabhya Goel

  • Infopath 2013 want display of error messages easier to find for user than default

    In an existing InfoPath 2013 form that I am working with, there are edits in the custom form that uses a custom list. Which is ok. The problem is it is hard to find all the errors if there are a lot of errors.
    What I would like to do is have an error message display in red under every column where errors are located after the user hits the submit button.
    Basically I would like to have some way of allowing the users to find all there error messages a lot easier after they hit the submit button.
    Thus can you tell me if the above request is possible? If so can you tell me and/or point me to links that will have all the error message(s) easier for the user to find after they enter data in a column or they hit have save button.

    I think you don’t like pop-up showing error message when you click the Save. It is automatically created by InfoPath form and user doesn’t have control over this behavior.
    Best option would be not allowing user to submit the form if the form is not valid. How to do it is easy by using InfoPath rule.
    1.
    Disable InfoPath Ribbon.
    2. Add custom submit button
    3. Set up the rule to disable (or hide) the button if the form is not valid
    You can enhance this form by display user friendly message in red next to each label or right above custom button.
    백상하 - Stop hacking my blog http://blog.naver.com/agilepoint
    쉐어포인트 배움터 http://sharepointkorea.com

  • Scrolling message display at first user login

    Dear All,
    I want to display two lines of message should display
    as soon as user login into the portal.
    What type of settings or how and where can I keep that scrolling message?
    any one can suggest please.
    regards
    Kumar.

    > I want to display two lines of message should display
    > as soon as user login into the portal.
    Where exactly in the portal? Masthead, Content area?
    Anycase u can put the tags below in a KM doc iView and place it where u want or on the first looaded page of your portal
    > What type of settings or how and where can I keep that scrolling message?
    > <marquee> tags

  • Displaying Messages to the user

    Hi,
    1. I have created one webDynpro application in which in default view I am using a tabStrip which contains 4 tabs.
    2. 4 different view are associated with these 4tabs.
    3. I am using messageArea UIElement in each view.
    4. But if I try to display any message using wdComponentApi.getMessageManager().reportSuccess(), it displays the same message in each view.
    5. So if I navigate through the tabs, it shows me same message in each & every view.
    6. I don't want to display the same message in another views.
    How to resolve this problem?
    Thanks in Advance

    To display an error message:
    wdComponentAPI.getMessageManager().reportException("Your Error Message", false);
    To display an warning message:
    wdComponentAPI.getMessageManager().reportWarning("Your warning Message");
    To display an success message:
    wdComponentAPI.getMessageManager().reportSuccess("Your success Message");
    This works in an iview other than do modify view.
    if you are using another Java file, you need to pass
    com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI
    from your iview to use this messages in your application in that file.
    Thanks & Regards,
    Mohak

  • Display message on a web template for specific queries

    Hi all,
    We're trying to find a way of displaying a message in our standard web template (0ADHOC) in order to warn users about issues concerning specific queries (availability of data, maintenance...). So, we would like to establish one message for some querys and be able to display it in our web template only if availabe.
    We faced this requirement with 2 different options, but none is working perfectly:
    1.- Add a Single Document web item to 0ADHOC_HEADER web template in order to display a document related to our InfoProvider. Issues that appear:
        - Warning messages need to be suppressed because when query doesn't have a related document, an horrible warning message is displayed.
        - InfoProvider related documents need to be established for each calendar month, so we're not able of establishing a document that can be correct for all months on the InfoProvider. So, document only appears if user sets a specific calendar month filter. If he doesn't set any filters, document is not displayed.
    2.- Use callquerydoc() in 0ADHOC in order to call query documentation on a new window when web template is loaded. Issues that appear:
        - If the query doesn't have a related document, we won't like the new window to appear (because it shows an error about not finding documentation).
        - No matter where I put the call to that JavaScript function, but each time you press a button or change something when executing the query, new window appears again.
    Could someone give me solutions for issues of at least one of these two options?
    If you have other suggestions to achieve our goal, please let me know.
    Thanks and best regards,
    David.

    Hi there, any replies? Should I summarize my question?
    How do you notify users when data is not reliable? (caused by, for instance, data loading errors, query maintenance... so on).
    I once used system messages (sm02) to notify all those data failures, but now we want the notification not to be global, but to be specific for some user groups (or query groups), and visible when they execute any query.
    Thanks again,
    David.

  • Infopath 2013 generic error message that displays

    In an InfoPath 2013 custom form that I created, I have several columns that are required. If the user does not enter all the data that is required, the automatic generic error message is displayed.
    I would prefer to make the error message that is more 'user friendly'. Thus can you tell me if there is a way to make the error message more user friendly? If so, would you tell me how to make the message more user friendly?
    The generic error message that is automatically displayed is:
    'InfoPath cannot submit the form because it contains errors. Errors are marked with either a red asterisk (required fields) or a red, dashed border (invalid values). use ctl+shift+O to go to the next error. Use ctl+shift+I to view error details'.
    Thus can you show me how to make this error message more user friendly in InfoPath 2013?

    Hi Wendy,
    All the error messages for the InfoPath form errors are stored in the intlcorestrings.js file which is located in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\LAYOUTS\INC.
    If you want to modify the error messages, then you can modify that file to change the corresponding error message.
    Per my knowledge, the error you want to customize is IntlCoreStrings.k_strSubmitBeforeErrors and IntlCoreStrings.k_strSaveSubmitErrorInformation.
    You can change the two lines.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

Maybe you are looking for