Change Notification not working on Oracle 11.2.0.2.0 but ok with 11.2.0.1.0

Hello together,
we have an .Net application which implements the Change Notification using ODP.NET.
On the customer site all worked well on the development and test environment connected to an Oracle database version 11.2.0.1.0. After setup of the production environment (Oracle 11.2.0.2.0 on another server) the change notification didn't work anymore.
The notifications are registered properly, but the event handles don't receive the change events.
It was checked, if all ports are open, firewall etc. and no hint from this side was found, why it should not work.
Then we recompiled the .Net application with references set to the new version of ODP.NET (11.2.0.2.1) - also without success.
After all, a second database was installed in the production environment, but now version 11.2.0.1.0 (same version as in development and test environment), and if connected to this database the change notification worked as expected.
Can anybody give me a hint, what might be the reason for not receiving change notification events on Oracle 11.2.0.2.0 ?
Thanks a lot and best regards
hattl

This is a DB bug, not an ODP.NET bug. If it were documented anywhere, it would be in the DB README. This problem affects anyone using change notification on a DB on any platform. This is not a problem specific to ODP.NET.
I suspect this issue is not documented since it was diagnosed after 11.2.0.2 became available. If you wish to track a bug, you can log into My Oracle Support and view the bug log. I viewed the bug log myself and the problem has been resolved. It's just waiting for the 11.2.0.3 patchset to be released.
If your organization needs this fix sooner than the second half of this year, let me know. I'll ask Oracle Support if they can include this fix in a bundled patch or one-off.

Similar Messages

Inter-Site Change Notification Not Working

I made the change in ADSIEDIT to enable Inter-site change notification after adding a second AD site on our domain.
The domain level and the old domain controllers in the main site are Server 2008 and the new domain controller for the new site is 2012 R2.
I tested it by adding and deleting users on a domain controller and checking that the users were added or deleted on the domain controller at the other site. It seemed to be working fine with that test. I could see the change within seconds.
However, I noticed that group membership changes and account lockout status are not updating quickly between sites.
I went back to ADSIEdit and saw that the "1" that I had entered in options a few days earlier was gone and it shows <not set> again.
I put the 1 back in and then when to a different domain controller and it still shows not set there.
What needs to be done to make sure that these changes stick and replicate between sites?

Have you enabled change-notifications on the site link according to?
http://www.ryanjadams.com/2010/05/turbo-charge-active-directory/#axzz2PaGkqbUu
Account Lockout attributes such as PwdBadCount and BadPasswordTime are NONE replicated attributes and should contain unique values on each DC, so they might not be the best to verify change-notifications against, moreover not all group memberships
are replicated to a DC if it's not GC in a multi-domain environment.
Do you have any manual connection objects (e.g.) not managed by the KCC? If so those needs to be changed back to be managed by the KCC if the change-notification option should be automatically propagated down from the site link, or either you have to enable
change-notifications manually as well on those connection objects, have a look at:
http://www.ryanjadams.com/2010/05/turbo-charge-active-directory/#axzz2PaGkqbUu
This script can help you find out if you do have manual connection objects:
Get-ADReplicationConnection -Filter {AutoGenerated -eq $False} |
Select-Object Name,AutoGenerated,ReplicateToDirectoryServer,ReplicateFromDirectoryServer |
Out-GridView
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

Voicemail notifications not working for iphone 4s

voicemail notifications not working for iphone 4s

I had the same problem and after a lot of research here and on Verizon I finally discovered that it was an app named Onavo Extend that was preventing my voicemail from working. Other people have had success resetting their phone or network settings, disabling and reenabling SIRI, or deleting the Neilsen app (which I didn't have) but those options didn't work for me. A lot of mods have claimed that this is not an Apple problem but if it is caused by an app that Apple allows to be sold in their app store, then it is an Apple problem, not a carrier problem. Of course, sometimes its just an ID 10 T problem.

What will you do if any SQL is not working.in oracle 10g...apps 11.5.10.2

What will you do if any SQL is not working. in oracle 10g....apps 11.5.10.2

928714 wrote:
yes sir.If you help me in answering my questions i wll be very thankful to you sir.
tnx,I haven't a clue.
As you have been advised in many of your posts, go study the documentation for whichever specific topic you are interested in.
For me to answer your questions, I would need to go get that documentation.
Then I would need to read that documentation.
Then I would need to write a forum post that interprets what I think I learned from that documentation.
It is so very much faster if YOU go do that instead of posting to a forum and expecting others to do it. You will remember what you study for a lot longer time if you teach yourself.

Table_From_Block Build-in Package is not working in Oracle 10G

Hi
Table_From_Block Build-in Package is not working in Oracle 10G
Kindly advice..

user648759 wrote:
Hi
Table_From_Block Build-in Package is not working in Oracle 10G
Kindly advice..Provide a little more information. Forms version OS version, more information about your problem and question.
--and explain what on earth Table_From_Block* mean's--
Tony
PS: TABLE_FORM_BLOCK is a built-in for internal use, usually auto generated by forms. For a moment I didn't get what that meant, need more coffee.
Edited by: Tony Garabedian on Aug 29, 2008 12:39 PM

Select * from tab is not working in oracle 10g

select * from tab is not working in oracle 10g. But at the same time,
select * from <<table>> is working.
Please advise me.

This works for me in 10.2.0.2
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from tab;
TNAME                          TABTYPE            CLUSTERID
LOAN_DETAIL                    TABLE
PLAN_TABLE                     TABLE
...

Interactive notifications not working in my 5s

uupdated my iphone yesterday but after update my interactive notifications not working

Have you restarted your iPhone? http://support.apple.com/kb/TS1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
If that does not help, reinstall iPhoto - that fixed the same problem for me, but that will delete the iPhoto library, so your journals and slideshows will be lost. You may want to make a backup of your iPhone before you try that.
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
If even reinstalling iPhoto does not help, restore your iPhone: http://support.apple.com/kb/TS3281

Triggers not working in Oracle 9iAS

The form triggers are not working in oracle 9i AS.
My Application server has Linux operating system with oracle form/report server installed. I am able to upload the form
in the client machine (using Internet Explorer Win98 OS). Also i can feed in the data but none of my triggers are working (WHEN BUTTON PRESSED and other validation triggers).
Can anyone suggest what to do pls.
Tnks in advance
Rgds
Manoj Philip
[email protected]

Well we've tested on Linux and the trigger do work - I remember two other postings on this forumn from prople with the same problem:
Re: SQL Developer Necessities
Re: About EXPLAIN PLAN table
In one case the problem was not re-compiling using f90genm.sh, in the other it was something to do with the Machine setup but I don't know what the final resolution was.
The only other thing is to make sure that you are on a certified linux release for using with iAS e.g. Redhat Server 2.1 and Suse Enterprise server 7 and Untited Linux
You can check the current certifications on Metalink.oracle.com

Iphone5 push notifications not working

iphone5 push notifications not working. But All ok with my iphone4s. All settings are same. Any idea what is wrong?

I am having this problem, too. I have several apps I require to notify me of things going on in my business but none of them appear or make a sound to alert me.

Exchange push notifications not working on iphone5

My work email is exchange, and it doesn't push on my new iPhone 5. I have all of the settings right for pushing. If I go to my mail, it says 'Checking Mail' and then new message show up. Any help with push notifications not working on the 5? Thank you.

This is an issue that a lot of people are having... it's all on this thread.
https://discussions.apple.com/thread/4345374?start=0&tstart=0
The 'fix' that is decribed in the first post does not work. The only workaround is if you are on Wi-Fi, turn off Cellular Data and then reset the push service by turning on Airplane mode for a few seconds and then turn it back off. Seems to be an issue with the iOS talking to the new LTE CDMA chip on Verizon and Sprint iPhone 5s.

Quick respont to notification not working in 5s, was it same for all app notification or only for imessages

QUick response to notifications not working for apps like whats app etc was it only worked for i messages

have you tried the dbms_streams_adm.set_message_notification()? I have never used it, but just read about it in the doc. Please let us know if it works or not.
ben

My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?

My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?

Reset Firefox to its default state
If you're having major problems which you can't resolve, start fresh with only your essential information.
Troubleshooting Information
This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
Application Basics
Name Firefox
Version 33.0.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Multiprocess Windows 0/1
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports
Extensions
Name Version Enabled ID
Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Adblock Plus Pop-up Addon 0.9.2 true [email protected]
Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
Graphics
Adapter Description Intel(R) HD Graphics
Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM Unknown
Device ID 0x0046
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
Driver Date 1-30-2013
Driver Version 8.15.10.2993
GPU #2 Active false
GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
Vendor ID 0x8086
WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote true
AzureCanvasBackend direct2d
AzureContentBackend direct2d
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
Important Modified Preferences
Name Value accessibility.blockautorefresh true
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 1
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
browser.startup.homepage www.google.com
browser.startup.homepage_override.buildID 20141023194920
browser.startup.homepage_override.mstone 33.0.1
browser.tabs.loadInBackground false
dom.mozApps.used true
extensions.lastAppVersion 33.0.1
font.internaluseonly.changed true
gfx.direct3d.last_used_feature_level_idx 1
keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
media.gmp-gmpopenh264.lastUpdate 1413750166
media.gmp-gmpopenh264.version 1.1
media.gmp-manager.lastCheck 1414375733
network.cookie.prefsMigrated true
places.database.lastMaintenance 1414404204
places.history.expiration.transient_current_max_pages 102059
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.npmedia 0
plugin.state.nptimegrid 1
print.printer_Canon_MG2100_series_Printer.print_bgcolor false
print.printer_Canon_MG2100_series_Printer.print_bgimages false
print.printer_Canon_MG2100_series_Printer.print_colorspace
print.printer_Canon_MG2100_series_Printer.print_command
print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
print.printer_Canon_MG2100_series_Printer.print_edge_left 0
print.printer_Canon_MG2100_series_Printer.print_edge_right 0
print.printer_Canon_MG2100_series_Printer.print_edge_top 0
print.printer_Canon_MG2100_series_Printer.print_evenpages true
print.printer_Canon_MG2100_series_Printer.print_footercenter
print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
print.printer_Canon_MG2100_series_Printer.print_footerright &D
print.printer_Canon_MG2100_series_Printer.print_headercenter
print.printer_Canon_MG2100_series_Printer.print_headerleft &T
print.printer_Canon_MG2100_series_Printer.print_headerright &U
print.printer_Canon_MG2100_series_Printer.print_in_color true
print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
print.printer_Canon_MG2100_series_Printer.print_oddpages true
print.printer_Canon_MG2100_series_Printer.print_orientation 0
print.printer_Canon_MG2100_series_Printer.print_page_delay 50
print.printer_Canon_MG2100_series_Printer.print_paper_data 1
print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
print.printer_Canon_MG2100_series_Printer.print_paper_name
print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
print.printer_Canon_MG2100_series_Printer.print_plex_name
print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
print.printer_Canon_MG2100_series_Printer.print_resolution_name
print.printer_Canon_MG2100_series_Printer.print_reversed false
print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
print.printer_Canon_MG2100_series_Printer.print_to_file false
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 2
storage.vacuum.last.index 1
storage.vacuum.last.places.sqlite 1412311800
Important Locked Preferences
Name Value
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.7 4.10.7
NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSUTIL 3.17.1 3.17.1
Experimental Features
Name ID Description Active End Date Homepage

Flash Player 10 does not work in IE or Firefox. What could it conflict with?

I'm using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash. Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything. I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
Yup. Nothing. When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option. I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
Flash 10i.ocx (10.1.82.76)
FlashUtil10i_ActiveX (10.1.82.76)
FlashUntil10i_Plugin (10.1.82.76)
genuinst (6.0.2800.1531)
FlashUtil10i_ActiveX.dll (10.1.82.76)
NPSWF32.dll (10.1.82.76)
KB931433
FlashInstall
Install
Flashplayer.xpt
When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled. I even enabled the other Adobe add-ons for Acrobat and such just to be sure. Firefox shows Shockwave Flash and Shockwave for Director both to be enabled. The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website. I have DirectX 9.0c installed and everything else works fine. I can play audio and video elsewhere with no problems. It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
Any ideas?

Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
>

My apple id is not working to open my icloud on my pc, but my apple id opens.. help?

my apple id is not working to open my icloud on my pc, but my apple id opens.. help?

It depends on how you set up your phone. You can have different Apple IDs for different services; you ID for purchasing can be different that the one you use for iCloud, iMessage, FaceTime, etc.
If you have only one ID for all of these and you have now changed it, you need to make these changes on your phone. To change the ID you use for purchasing from the iTunes and app stores you go to Settings>iTunes & App Stores (or just Settings>Store in iOS 5), tap the ID, sign out, then sign back in with the changed ID and/or password. To change the ID for iMessage you go to Settings>Messages>Send & Receive (or Settings>Messages>Receive At in iOS 5), tap the ID at the top, sign out, then sign back in with the changes. Same for FaceTime by going to Settings>FaceTime.
To a different ID for iCloud your go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your new ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.

Change Notification not working on Oracle 11.2.0.2.0 but ok with 11.2.0.1.0

Similar Messages

Maybe you are looking for