Change password for internal/oracle??

If for some reason, I need to change password for internal, could I logon as system to change password for internal?? Thanks for any reply...

You could...but it is little tricky...
Here are the steps...make sure you do a complete export of the existing
schema...if any thing were to go wrong...
There are different method of changing the password file.
ORADIM or ORAPWD..
I tend to use ORAPWD if I am concentrating on the password only...
if there are any more alteration to be made to the SID...such as renaming A SID
san so forth..then I use ORADIM..
BUT for your need any one of this will work..
CHANGING the INTERNAL PASSWORD USING ORADIM command:
to change the password with ORADIM:
1) Delete the SID fro the password you want to change:
c:\ORADIM -DELETE -SID SID
where SID is the SID to delete
2) Verify that the PWDSID.ORA and STRTSID.CMD files have been removed from the
\ORACLE_HOME\DATABASE\
directory
3) create the same SID again and specify a new INTERNAL password
c:\ORADIM -NEW SID SID -INTPWD NEWPASSWORD -STARTMODE AUTO
-MAXUSERS N -PFILE
<drive:
\path\init{sid}.ora>
where SID is the same SID to recreate, NEW_PASSWORD is the INTERNAL password,
and N is the maximum number of DBAs/Operators who can be logged in at once with
the password..
This should take care of you issue..
However there are some other way to delete and use authentication...
If you decide to use ORAPWD:
Then there is a different approach to modifying the internal password...
CHANGING PASSWORD USING ORAPWD
F:\OraHome1\BIN>orapwd file=shahpwd password=snawaz
this will create a passowrd file shahpwd
also make sure your init.ora is set to
remote_login_passwordfile = exclusive
shutdown the database log..out of the svrmgrl..
and log back in with a new password...
svrmgrl> connect interna/snawaz
GOOD LUCK
Shah

Similar Messages

  • Ecc6, after i've changed all the passwords for all oracle users, then how

    ECC6, after i've changed all the passwords for all oracle users, now sap can't connect to oracle , then,  How can i config the sap to make sure it can boot normal?
    If our database is sqlserver, i've changed the database password for all database users, then, How can i config the sap?
    Thanks!

    My db is oracle ,                           the oracle host name is dbserver.
    The sap ap server only install the SAP. SAP host name is apserver.
    Just now i've altered all the password of the oracle database db user account, Include the account "sys".
    (I must alter the password.)
    Now the SAP service in the host "apserver" can't boot.
    Could you teach me  how can i config the "apserver" to make the SAP normal boot ?
    Thanks!
    Best regards!

  • No password for internal

    Database: Oracle8i Enterprise Edition Release 8.1.7.0.1
    OS: Linux 7.1, Kernel 2.4.2-2
    I have not been able to set the password for internal. I have tried using orapwd with parameter remote_login_passwordfile = exclusive under init<sid>.ora file. It did not work. I have tried changing the password for sys using alter user sys identified by <somepassword>. It did not work. I have logged into an sqlplus session under user sys and issued-- password internal. It also did not work. Does anyone know how to setup/change the password for internal?
    The disturbing thing about this is that there is no password required for user internal. All one has to do is type-- sqlplus internal-- and it will log a user into Oracle as user sys with sysdba priviledges enabling one to do just about anything to the database they want to. This is a serious security problem.
    Did I miss something? Has anyone else had this problem and fixed it?

    Hi,
    every system user (UNIX) belonging to group "dba" - but nobody else - can login to oracle via sqlplus or svrmgrl as "user" internal without being asked for password. So the only security issue is to protect the UNIX server/UNIX account!
    Pay attention: the connect internal is no longer supported with Oracle9i!
    Regards,
    Thomas.

  • Change Password for TechNet

    Call me an idiot, but how does one change one's password for the Oracle Technology Network account? After I'm logged in, I see where I can update my account's profile, but I'm not seeing where I can change my account's password.
    Thanks.
    Signed,
    Sheepish

    Thank you for your response.
    After I am logged in using my current password, I'm seeing "Welcome, My Name (Sign out)" toward the upper right corner of the page.
    I then click on "My Name" to go into the account details. Whether I view or go ahead and update my profile, I am still only seeing "Welcome, My Name (Sign Out)". I am not seeing another "Account" link.

  • How to change password for a user in WLS 7.0 embedded ldap in code?

    I asked the similar question before but don't have an answer yet.
    I need to change password for a user in my Java code. Any help will be
    appreciated.
    Here is my stack trace:
    c:\Test>java -classpath . testEmbeddedLdap
    attribute: uid
    attribute: description
    attribute: objectclass
    attribute: wlsMemberOf
    attribute: sn
    attribute: cn
    javax.naming.NoPermissionException: [LDAP: error code 50 - Insufficient
    Access Rights]; remaining name
    'uid=myRegularUser,ou=people,ou=myrealm,dc=mydomain'
    at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:2872)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2810)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2616)
    at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1374)
    at
    com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDir
    Context.java:255)
    at
    com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(Partial
    CompositeDirContext.java:172)
    at
    com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(Partial
    CompositeDirContext.java:161)
    at
    javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.
    java:146)
    at testEmbeddedLdap.main(testEmbeddedLdap.java:30)
    Here is my testing code:
    <PRE>
    import java.util.*;
    import javax.naming.*;
    import javax.naming.directory.*;
    public class testEmbeddedLdap {
    public static void main(String[] argv) {
    Hashtable env = new Hashtable(11);
    env.put(Context.INITIAL_CONTEXT_FACTORY,
    "com.sun.jndi.ldap.LdapCtxFactory");
    env.put(Context.PROVIDER_URL, "ldap://localhost:7001");
    env.put(Context.SECURITY_AUTHENTICATION, "simple");
    env.put(Context.SECURITY_PRINCIPAL, "uid=myAdministrator, ou=people,
    ou=myrealm, dc=mydomain");
    env.put(Context.SECURITY_CREDENTIALS, "myAdministrator");
    try {
    DirContext ctx = new InitialDirContext(env);
    String
    sUser="uid=myRegularUser,ou=people,ou=myrealm,dc=mydomain";
    String sOldPassword="myRegularUser";
    String sNewPassword="newpassword";
    for (NamingEnumeration ae = ctx.getAttributes(sUser).getAll();
    ae.hasMore(); ) {
    Attribute attr = (Attribute)ae.next();
    System.out.println("attribute: " + attr.getID());
    ModificationItem[] mods = new ModificationItem[2];
    Attribute mod0 = new BasicAttribute("userpassword",
    sOldPassword);
    mods[0] = new ModificationItem(DirContext.REMOVE_ATTRIBUTE,
    mod0);
    Attribute mod1 = new BasicAttribute("userpassword",
    sNewPassword);
    mods[1] = new ModificationItem(DirContext.ADD_ATTRIBUTE, mod1);
    ctx.modifyAttributes(sUser, mods);
    ctx.close();
    } catch (NamingException e) {
    e.printStackTrace();
    </PRE>
    "Neil Smithline" <[email protected]> wrote in message
    news:[email protected]...
    Two things. First, I'm not exactly sure what password you are trying to
    change. The LDAP server's password or a user's password in the LDAP
    server. Second, could you please post a stack trace.
    Thanks - Neil
    K Wong wrote:
    I am using (javax.naming.directory.DirContext.modifyAttributes) to
    change
    password to our development Weblogic 7.0 embedded LDAP.
    I login as the system administrator (a user in the administratorsgroup),
    but always gets the javax.naming.NoPermissionException - InsufficientAccess
    Rights.
    What user should I use? Any help will be appreciated.

    Hai,
    This condition based execution requires - javascript coding.
    In miscelleaneous tools bar, you have an option of SCRIPT_ITEM writer tool, drag the tool into your WAD layout, and select the properties , choose the editor option and paste your coding. that's it.
    Alternate option :
    in your web application design layout , you will fine XHTML coding editor , there you need to write coding and execute the same.
    Hope this will help to you.
    Assign Points if its really useful.
    Cheers !!!
    Bye
    Regards,
    Giri

  • WLST script for changing password for userid in Weblogic 9.2

    Hello Everyone,
    We want to change password for userid in weblogic 9.2. Is there a way we can do this by using WLST script? If so please provide me with steps for doing that using WLST. Thanks in advance.
    - - Weblogic Consultant

    Did you try going to the WLST documentation and searching for it? Go to [http://edocs.bea.com/wls/docs92/pdf/config_scripting.pdf] and search for "Changing a Password". The example there seems to be what you need.

  • I am unable to change passwords for any users.  The "change password" is grayed out.

    I am unable to change passwords for any users.  The "change password" is grayed out.  I know there is a way to change them but I am having trouble finding it.
    Message was edited by: dmw1975

    If you're in the Users pane of the server app, and you select Network Users from the drop-down near the top, there's a small padlock icon at the bottom. Is it locked or open? If locked, click it and enter credentials into the authorisation box that opens

  • How to change password for itunes

    HELP PLEASE!
    DOES ANYBODY KNOW HOW TO CHANGE PASSWORD FOR ITUNES?

    Follow the instructions here.
    Apple ID: Changing your password

  • How to change password for BtOpenZone?

    Hi,
    Does anyone know how to change password for BtOpenZone? I have tried the following link and it is not working with me....
    http://www.btinternet.com/new/content/mybti
    Last time I have to ring BT to change the password, but I want to do via some control panel.
    Thanks
    Kam 
    Solved!
    Go to Solution.

    If you're a BT Total Broadband customer and you want to change the password, you can go to btyahoo.com, log in there and change your password. The primary email account and the FON/OZ logins are linked. if you change your email password, your FON/OZ password will also change.
    if you're an Openzone only customer, you can log into your control panel on the main page and change your password there.

  • How to change password for sidadm user on HP-UX

    Hello
    How to change password for <sidadm> user on HP-UX

    Hello Jan,
           1.      Log on to the operating system with the <sid>adm user.
           2.      Open a shell.
           3.      Enter the command passwd.
           4.      Enter the old and new passwords
    Rohit

  • How to change password for apple user id

    how to change password for apple user id

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for parental controls

    how to change password for parental control on macbook pro

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for  XELSYSADM user in OIM?

    Hello Gurus and Experts!
    How to change password for XELSYSADM user in OIM?
    Your help is appreciated.

    Follow the undermentioned steps to change the password:
    1) Change the password from oim Design Client as usual.
    2) Open xlconfig.xml present in <XL_HOME>\xellerate\config folder.
    3) This step is optional and should only be used if you have a <XLPassword encrypted> tag in the <Scheduler> section. In the scheduler section, change the encrypted="true" to encrypted="false" and replace existing encrypted password with new clear text password, as shown below:
    <Scheduler>
    <XLUserName>xelsysadm</XLUserName>
    <XLPassword encrypted="false">NEW_PASSWORD</XLPassword>
    </Scheduler>
    4) Restart server.
    Now login with the new password.

  • After joining computer to the windows doamin i cannot change password for Mac for the domain user

    After joining computer to the windows doamin i cannot change password for Mac for the domain user

    Hi,
    Did this problem occures after installed Windows 8.1 Update 1? Here is another thread that had similar problem. Also I don't think this problem relate with Domain. Please refer to the solution of the thread below for reference, If there is any
    progress, please let us know.
    http://social.technet.microsoft.com/Forums/en-US/08993680-b6f5-4e80-b031-d32fec97d682/not-able-to-right-click-on-tiles-after-81-update?forum=w8itproge
    Roger Lu
    TechNet Community Support

  • IMessage issue: Changed password for my Apple ID this morning and now my iMessage is sending through my email?

    iMessage issue: Changed password for my Apple ID this morning and now my iMessage is sending through my email instead of my number and I haven't been receiving any texts through iMessage! I read the article, followed the steps, and it did not fix the problem. Help?

    Hello!
    On all of these devices, go to: Settings > iCloud and make sure they're updated with the new password. If you're talking about Macs, go to: "System Preferences > iCloud" too.

Maybe you are looking for