Change posting date / fiscal year of parked document

Hi SAP experts, is there a way we can change the posting date / fiscal year of a parked document? The system displays an error "Changing of document number or fiscal year not possible here". Any comments or suggestions will be greatly appreciated.
Regards!

Hi,
You can change the posting date and period of a parked document. Please go through the link. It will guide with screen shots.
http://www.finance.utoronto.ca/fast/qrg/nav/hld_prk/parteditpostdel.htm
Regards,
Satish Muvva.

Similar Messages

  • Mass change of posting date/fiscal year in LIV parked invoices

    Hi,
    We have OSS note 99775 (program ZFSAP2_B) for mass changing posting date and fiscal year for FI parked documents but I can not use this to change posting date for LIV parked invoices.
    Did anyone have any idea how to mass change the posting date of LIV invoices? any NOTE or PROGRAM?
    I tried to create a BDC using FBV4, which in turn calls MIR4, but system is over writing  initial line item amount and qty from PO. 
    I can read initial invoice line item values and over write again but I dont think this is how I should do.
    Please advice.
    Thank you all and best Regards
    Vijay Goli

    Hi
    Thank you very much for your input.I modified the program ZFSAP2_B given by sap and it worked fine for LIV invoices also.
    When I used this program  in 2007 for FV60 documents the document key was changed without raising the event FIPP.CHANGED. But this year when we changed the posting date the system triggered the CHANGED event and as a result of this event the workflow came to the starting point. We did not make any chages to workflow template during 2007. Any idea what could have casued this event to trigger?
    Thanks
    Vijay

  • Cannot change posting date of a parked document. See addt'l details inside

    Hello again SAP experts,
    I was just wondering how come I cannot change the posting date of a parked document. The document type of the said parked document is a "BATCH INPUT" only document type.I already set in config that the posting date be changeable for parked docs.
    Is it not possible to change the posting date even if the status is only parked? Our client requires that the posting date still be changeable for BATCH INPUT only doc types. Please help.
    BTW, listed below is the error message that the system displays. Thanks
    Document type AA only defined for batch input

    Hi Loong,
    First and foremost, thanks for your time answering my queries. =)
    Going back to the topic, the OB32 suggestion didn't solve the issue. I added BKPF-BUDAT in the list, and made sure that it applies to all account types. I also tagged it as changeable field.Still, the system displays the error Document type AA only defined for batch input
    Is there such a rule that for doc types that are tagged as for BATCH INPUT only, you cannot change the posting date?
    Our client requires that the posting date still be editable.
    Please help. Thanks a lot!

  • USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT

    Hi,
    Pls advise any USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT.
    Regards,

    Hi,
    There is another user exit for updating material document data Upon posting  is MB_CF001
    I hope this will fullfill you.
    Prem

  • Change posting date in FB60

    Hi....
    We are trying to change posting date (which is in new Fiscal year 2012)  for an FB60 parked invoice , but following error message is coming
    "Changing of document number or fiscal year not possible here
        Message no. FP041"
    How to fix the error.
    Regards
    Vishnu

    Dear expert
    Once you had pressed enter key and when the posting date is greyed out, if tend to change it press key F12 and click on yes. This would reset the field and you can enter the correct date...                                                                               
    OR
    Try to reset the variant in FB60, go to the FB60 from the menu select edit --> screen variant -->reset screen variant. Or go to SHD0 and give the transaction code and select transaction variant or press F4 to find the variants or you can create your own.
    Regards
       Ajeesh.s

  • Changing from a Fiscal year to a calendar year

    Hi Everyone,
    We need the supporting documentation, guidance to change from a Fiscal year to a calendar year. Also please share your experience, suggestions, thoughts on this?
    Currently, our year-end is SEP 30th, now there is a requirement to change the year end from SEP 30th to DEC 31st.
    N:> Keithley GL Superuser USA > Setup > Financials > Calendars > Accounting
    Calendar is already associated to the set of books and the budget year for 2011 is already opened in the Production instance
    We entered the budget through a spreadsheet upload using ADI. We can roll back the budget and reenter if required
    We have already gone through the metalink note IDs 102460.1, 134362.1, and also the below document from Oracle Support
    http://download.oracle.com/docs/cd/E15799_01/books/OnDemOLH/index.h...,
    Below are our open questions at this point
    1) Can you please let us know what would happen if the transition closes on the middle of the month
    Example: We will close the month end, year end at the end of the month but what would happen if we close at the middle of the month (say DEC 15th instead of DEC 31st)
    2) Will it be short? From 1st October 2010 - 31st December 2010.
    Or will it be long? From 1st October 2010 - 31st December 2011.
    Can you please let us know the pros and cons for each of these?
    3) According to the Metalink note Id 102460.1, the application will prevent you from making changes to calendar the unless you meet the following qualifications:
    a) All the periods to be changed have a status of Never Opened.
    This condition does not match to the current situation at the clients place as we don’t have the status "Never Opened" for any of the periods in the accounting calendar in
    subledgers
    b) A budget year that includes the periods to be changed is no t yet opened.
    Budget year is already opened for the year 2011 at the clients placec) An encumbrance year that includes the periods to be changed is not yet opened.
    “Encumbrance” is not applicable at the clients placed) The periods to be changed have not yet been copied from the GL Calendar to Project
    “Projects” is not applicable at the clients placeThanks
    Veena

    Pl post details of OS, database and EBS versions. Pl see if these MOS Docs can help
    How to change GL Calendar from a Fiscal to a Calendar year?          (Doc ID 102460.1)
    CHANGING SET OF BOOKS CALENDAR FROM CALENDAR YEAR TO FISCAL YEAR          (Doc ID 1060624.6)
    R12: Is It Still Possible To Change GL Calendar From Fiscal to Calendar Year In Release12?          (Doc ID 836263.1)
    General Ledger Calendar FAQ          (Doc ID 134362.1)
    HTH
    Srini

  • Change posting date in incoming excise invoice

    I need to be able to change posting date in incoming excise invoice. It just takes the date from GRPO and doesn't let me edit it. There are instances when I get excise invoice at a later date, and when that date may be in the next month, I want to be able to post excise entry in the next month. If it posts in the previous month, and if the excise returns have been filed, the closing balances will differ. For the documentation purpose, we have the document date, which can be same date as the GRPO date.

    Hi Krishna.....
    This should be legally taken as GRPO date because its excise rule when you receiving material your Excise invoice should on the same date. So whatever system is behaving its legally correct. You cannot change the Incoming Excise Date as you wish. It must be the GRN date.....
    Regards,
    Rahul

  • Auto change Posting date to current date in Service Entry on approval day

    Hi Guru
    The scenario is:
    User is creating a Service Entry (SE) ML81n
    The Posting date X is taken automatically as today's / sys date in SE
    The SE goes for approval in Approver's inbox.
    Approver is taken to SE when presses approval button on X+1 date i.e. the next day.
    In SE the posting date is still the same as X
    Posting Date automatically change to X+1 in SE.
    (I found that this issue does not have link to workflow,  i ts only in ML81n we need to look in. or there may be other opinion)
    Pl help in understanding to get this change automatically done.
    Best Regards

    There are two date fields in the accept data tab.
    1> Document date: The date at which the service entry sheet was created
    2> Posting date: When the entry sheet is created but not approved then
    document date and posting date are the same.The document date is updated only when the entry sheet is approved.
    If there are multiple levels of approval, the posting date will reflect the date last approval and will be updated with the date of final approval when the sheet is finally approved.
    Hope this has helped you !
    Regards,
    Aviator

  • Changing posting date at usage decision for handle units. How?

    Does anybody know how to change posting date at usage decision for handle units (HU)?
    If the material is not managed by HU, SAP allows this modification (there's a button with a hat on it referring the material document header).
    For HU I cannot seem to change posting date!
    Seba

    Yes it's possible! Well,...unless for versions 4.6C, 4.7 and ECC 5.
    I've found SAP Note #752131 by which SAP declares that you can create the pushbutton from the Screen Painter referring the document header.
    That's all,.....so simple, and it works fine!
    This note applies ONLY to version 4.6C, 4.7and ECC 5 (which is the version the customer I am with has installed).
    Thanks anyway.
    Sebas

  • Change posting date in CO-PA Assessment

    Hi Friends,
    I have a question:
    We need to change  posting date in CO-PA Assessment.
    For instance:
    I execute KUE5 for period compressed from January to March. In this case, the system will post one document for each period.
    We need to post these three documents in the same period. ¿is it possible?
    Thanks in advace
    Carlos.

    Hi Carlos
    thats not possible....
    However, there is a slight possibility.. If you switch on the "Cumulative" indicator for your cycles, the system calculates the difference of YTD amounts Less Amounts posted in previous period.. This calculated diff is posted in the current period
    I dont know if this will work for you... Personaly, I wont advice to do this, even if possible.... Cumulative indicator creates a lot of probs....
    Regards
    Ajay M

  • How to change billing date in S1 - cancellation billing document

    Dear Friends,
    Could you please tell How to change billing date in S1 - cancellation billing document which is even not released to accounting & in gray mode.
    Is it possible?
    Thanks in advance.
    Ranjan

    Dear,
    Thanks for asking exact problem.
    1. PGI in 2008
    2. F2 Billing date in 2003 ( By mistake by the user)
    3. S1 Billing date in 2008
    4. PGI reverse in 2008 & OBD deleted in 2008
    So reduced billing qty is shown in report in 2008 because of S1 Billing date in 2008,
    Billing qty  is not matching with the actual PGI quantity.
    So here if the cancellation billing document S1 could be changed for billing date in 2008, then you could balance it
    Now my issue is how to balance it.
    hope you find it it very interesting
    Awaiting your response.
    Ranjan

  • Change posting date in Cash Journal

    Dear experts,
    I want to change posting date in Cash Journal after i saved the transaction. Can anyone help me?
    Thx
    Marilyn

    This is wrong thread, I will move this message to FI-GL

  • Implications of Changing Posting date of parked document.

    Hi,
    I have changed the posting date, document date & translation date to current period
    of an already parked document in a closed period.
    (e.g) Document parked in month of 28.04.2009(closed period) & i have changed the dates to
           28.05.2009(current period)
    I need to know what are the implications of the changes in dates for (posting date, document date & translation date) induvidually for both the periods(closed & current).
    Thanks
    Kenn

    Hi,
    There is no implications of change the the posting date of parked document because parked documents are not affected in financial.When you post the doucment then it will affect in finance.so there is no problem. You can change the posting date or document date only in a Fiscal year.

  • Change Posting Date of Parked Invoice on Approval

    Hi,
    I have a scenario where one user creates a parked invoice in FB60 and is routed to another user as a workflow item to release the parked invoice.
    I need to change the posting date according to some business requirements, upon release of the parked invoice by the approving officer. For e.g. if invoice is created in last fiscal year but approved in new fiscal year, the posting date shld be changed to last day of the last fiscal year. and all these needs to be coded somewhere. Which means I can't use the standard SAP config to set posting date to System Date or the original Date entered- as these are not what I want.
    Does anyone know of a user exit, BTE, BAdI to accomplish this? I tried some BAdIs, but the posting date is always being reset to the procedure for setting the posting date in T001-PP_PDATE. and i do not want this.
    Your help is greatly appreciated! Thank you!

    Hi,
    Can you please provide any documentation or any links regarding the Workflow approval process for the parked documents. As you have already dealt with it can you  atleast share the knowledge...
    any help is greatley appreciated...
    thanks

  • Change Posting Date of Parked Invoice on Release

    Hi,
    I have a scenario where one user creates a parked invoice in FB60 and is routed to another user as a workflow item to release the parked invoice.
    I need to change the posting date according to some business requirements, upon release of the parked invoice by the approving officer. For e.g. if invoice is created in last fiscal year but approved in new fiscal year, the posting date shld be changed to last day of the last fiscal year. and all these needs to be coded somewhere. Which means I can't use the standard SAP config to set posting date to System Date or the original Date entered- as these are not what I want.
    Does anyone know of a user exit, BTE, BAdI to accomplish this? I tried some BAdIs, but the posting date is always being reset to the procedure for setting the posting date in T001-PP_PDATE. and i do not want this.
    Your help is greatly appreciated! Thank you!

    hi,
    You have to cancel the Parked invoice and again you have to verify using the new date
    G.Ganesh Kumar

Maybe you are looking for