Change production sys. SID in LMDB for an ongoing Charm project

Hi all,
We are in the process of configuring Charm on Solman 7.1 SP12
In our current scenario, BSD and BSQ have been already upgraded. So they are in the same release. Production system (BSP) however has been not upgraded yet. Therefore, in LMDB there is a system with the above-mentioned SID (BSP). The point is that BSP it is in different release from the rest of the system in the maintenance track (BSD and BSQ).
Considering the above described scenario, we are not able to add current BSP in logical component (LC) for BSD and BSQ, and that it is being used within the Charm project, since it has a different product version from the rest of the system in maintenance landscape. Unfortunately we are not able to delete nor modify BSP in LMDB either since is being used in BPmon among other things.
We are planning to create a Virtual production system with a different SID (eg BS2) and with the correct release, product versions, in order to be able to include it to the LC currently added to the Charm project.  Work this way until the upgrade process on BSP ends. Then, when BSP is upgraded, and after closing the maintenance task lists, production system will be updated from BS2àBSP in LC. Do you see any constraint
in using this strategy? 
Please let me know if was clear enough. 
Thanks in advance

Hi Sid,
There is a concept called transport of copies (ToCs) which will help you in this situation.
Transport of copies can move the changes to TEST environment when ChaRM project is "in development".
Transport of copies can move chang only to next system i.e. TEST and cannot move further to production system.
Developers can test and revert back the change untill test is successful without any effect on the flow of the change documents. Once development is as per requirement, regular transport request can be released from D -> Q -> P.
Thanks,
Ambarish

Similar Messages

  • BADI for changing product catgory

    Hello SRM Experts,
    I am looking for an BADI for changing product category.
    We use classic scenario with an external catalog. Our supplier delievers us some data. Some of this data are used for statitical reason for example new item matgroup from oci interface.
    now I want to determine the product categorie in relation to the delivered new item matgroup.
    I have found some BADI to manipulate the Data - but not possible for product category. Thank your for help
    Regards Uwe

    Hello Yann,
    I have activated this BADI already. But I have not managed it to change product category.
    Which field of this BADI has to be changed ?
    Where do I get the GUID from ?
    thank you

  • How can we change the  color of the image for product display for different

    Hi All,
    How can we change the  color of the image for product display for different colors, to be displayed on site.
    jeff

    Hi priya,
    The requirement that you have stated is not a standard feature in ISA CRM. In order to do the same, you will need to modify the standard ISA code in Java. A common path for the solution would be as follows:
    1. Colours
        a. Maintain a text type for Color under the object - PCAT_ITM in Customizing.
        b. Modify the standard search of ISA to search within your new text type as well. (In standard it only searches in Description.
       c. Maintain all shirts colour data in the new type created in step a.
       d. Your requirement will be done!
    2. Price
      a. Use list prices for your shop and assign the appropriate condition type, acces in your catalog.
      b. Modify the standard search of ISA to search on the list prices as well.
      c. This too will be done!
    3. Accessories - This is very tricky, and will require some exploration. However, here's my opinion,
    a. Search for the standard function module, which will return the accessories when provided the product as an input.
    b. Modify this function module according to your requirement and ensure that it can be accessed remotely.
    c. Modify the JSP as in steps 1b and 2b above to call this new remote-enabled function module.
    d. Now you're done!!
    The ISA modification part is not so simple, you need a really good guy like "Sateesh Chandra" who'll be able to handle your requirements. This is all I could manage, hope it is some help to you!
    Thanks & Regards,
    Nelson.

  • Change production for SFC in a container

    Hi,
    During RMA receiving in SAP ME 6.0.4, we are doing Change production.
    If the SFC is packed into a container we get this error message
    "Change production not allowed for SFCs that are in a container"
    Then we have to unpack the SFC from the container and we lose the traceability of
    the container the SFC was originally packed into.
    Is there a way to allow change production and still keep the SFC in the container?
    Best regards,
    Johan

    Hi Alex,
    Correct, that is the functionality I want.
    Is it possible if I log a support ticket to get it developed also for 6.0?
    Best regards,
    Johan

  • I would like to change the spacing between the words for the product names, they look double spaced at present.

    A simple question I think, I would like to change the spacing between the words for the product names, they look double spaced at present. On the home page, and product pages. Not sure where to change this in the css here is the site; http://top10shop.businesscatalyst.com

    That site is using an old font technology called cufon, it uses canvas to draw the text into the font you want. Not really good for modern websites.
    It is what the font was and how it was made. I never used Cufon but the documentation is here - Usage · sorccu/cufon Wiki · GitHub At a glance there are no render options for the double spacing so I am guessing it was how the font was generated.
    I would scrap all of that completely tbh.

  • I needed to change the SAPService SID password for security reasons

    Hello Basis,
    How do I change the SAPService<SID> password at the windows level.
    Thanks in advance,
    David

    got it.

  • How to change IP, Hostname and domain name for Oracle Application R12

    Hi,
    I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
    Our production and test server environment is:
    Linux Enterprise AS 2.6.9
    Application module: E-Business Suite Treasury only
    Your advice will be much appreciated.
    Regards,
    Kenneth
    Edited by: 850209 on Apr 7, 2011 5:37 PM

    850209 wrote:
    Hi,
    There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
    Thanks.
    Regard,
    Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
    If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

  • Changing a SYS Password Permanently.

    Hi,
    How could i change a sys password permanently?
    Kindly post me the steps in changing the same.
    Previously i have tried creating the Orapwd file as follows
    Ive shuddown the DB and exported ORACLE_SID=poorna
    created
    orapwdfile=ORACLE_HOME/dbs/pwdpoorna.ora password=poorna
    I was able to login as sys/poorna as sysdba and sys/sys as sysdba also.
    I want to login as sys/poorna only.
    also i have tried alter user sys identified by poorna (changes doesn't takes permanently)
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for Linux: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Thank You.

    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for Linux: Version 10.2.0.1.0 - ProductionYour OS platform is Linux &
    created
    orapwdfile=ORACLE_HOME/dbs/pwdpoorna.ora password=poornayou created password file is in format of Windows. So this password file even if you create, it will be ignored as srp mentioned.
    I was able to login as sys/poorna as sysdba and sys/sys as sysdba also.
    I want to login as sys/poorna only.
    also i have tried alter user sys identified by poorna (changes doesn't takes permanently) When you are the owner of the ORACLE that mean you have OS authentication, Actual authentication no need. Try with wrong password from client machine or any other machine with wrong password. :) then you will.

  • I was looking at a tanning website today and then I logged off and went to eat lunch.  When I came back, I got on Facebook and on the side were ads for tanning.  What do I do so that this won't happen?  I feel like something is wrong.

    I was looking at a tanning website today and then I logged off and went to eat lunch.  When I came back, I got on Facebook and on the side were ads for tanning.  What do I do so that this won't happen?  I feel like something is wrong.  I have heard Macs don't get viruses, but I still have Norton Virus Protection.  What is this and how do I make it not do it again!
    On another note, my trash can all of the sudden started asking for my password when I move something to it.  It is extremely annoying when I want to delete more than one thing.  Is there a way to make that not happen too?    Thank ya'll!

    1. Triple-click the line below to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu.* An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
    Remove the Norton/Symantec product by following the instructions on either of these pages:
    Uninstalling your Norton product for Mac
    Removing Symantec programs for Macintosh
    If you have a different version of the product, the procedure may be different. Back up all data before making any changes.
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Consider installing an ad-blocker and/or a selective cookie block such as the "Ghostery" Safari extension.

  • Absolute horrible customer service!!!! I cannot use a product I've already paid for and no one is helping!!!!

    So I have been a longtime Adobe customer. I have nearly every version of the creative suites, with all the bells and whistles and have spent thousands and thousands of dollars on these products for our business as well as personal use. SO.....we just upgraded the OS on our primary editing bay, and I found that I needed to reinstall the Premiere Pro 5.5 upgrade to the system that I purchased online a couple years back. I go to access my online account, and it said that I needed to reset the password, but the problem is that the email that was used is not turned off and I have no way to access.
    Thinking that this was not a big deal, I contacted support via the chat system. The first person told me he could not help at that time, and while asking a follow up question he (or she) cutoff the chat. I immediately started another chat. The next agent stayed on, but also said that they could not anything, but they would escalate it to the next group up, and that they would transfer the account to my current email address. That was nearly 3 weeks ago.
    I have since received emails nearly daily apologizing for the delay (a form letter) in resolution. Then I got another email saying I needed to write a letter saying what I wanted, and that should take care the problem. So....I did. Then I got another email.....this time saying that the letter was not enough, and that I would have to add a scanned image to the letter of my government issued ID. I replied, indicating my patience has run out after 3 weeks, but sent the letter again as requested. And guess what??? Today I get another email with an apology, and that it would be escalated to another group to see if they could do it.
    This is not acceptable in any way. I have to get my keys to the 5.5 upgrade as its using the trial version right now since I can't login to get my keys....and NO ONE AT ADOBE IS ABLE TO DO A THING ABOUT IT.  How hard is it to change the access email to ones account, or have it transferred to the new one. (I had to sign up for a new account with the correct email just to post on the forums).
    SO PLEASE.....if there is a competent person left there, that can take care of this problem please do. I just need my purchases attached to this account!!!! . I will have no choice but to start seeking a legal remedy within the next 48 hours is not resolved. I have a project that has to be completed, and due to this incompetence I can't use a product I have already paid for. It should never take nearly 3 weeks for this to be resolved.

    Thanks Steve, I appreciate any help that can be provided. I’ve tried to be patient but after getting yet another Friday saying the exact same thing about it being escalated to the right group (which is the same email I’ve gotten day after day for 3 weeks) I have had enough. Clearly whomever is handling the general customer service, in whatever country they are in really do not care or even have a process to follow. They just clear their cue apparently so that they make their personal numbers. (I was formerly a tech support manager for one of the large PC and peripherals producer....so I am familiar with some of these antics, though we would have fired someone for something like this). Given how much I have paid to Adobe for their products over the past ten years as a business owner it a shame that this is not getting resolved.

  • I can access internet via boot camp with windows 7, but not when I use the Mac w/Mt Lion side. Thanks for any tips!

    I'm using a 2012 Intel-based iMac with Mt. Lion and Windows 7 with Boot Camp. I used to be able to access the internet on both sides. Now, my only internet access is through Boot Camp. At one point, access was unable on both sides but IE in Windows 7 automatically diagnosed the problem, changed some settings (which I don't know) and I could access the internet on both sides . . . for a while. Now, I can only get online in Boot Camp. Since IE detects no problems it doesn't apply the fix as it did before. Does anybody know what's going on?
    I should mention that I installed Boot Camp because there is no Mac version of the software (VantagePoint)  I need to use (duh).  I wanted to be able to use the software w/o rebooting all the time so I installed Fusion. Of course, I didn't ask the VantagePoint techs if this would solve my issue. It didn't - VantagePoint won't work with Fusion, but it will with Parallels. So I installed Parallels and imported Boot Camp. Apparantly, it was not set up properly, I'm getting all kinds of errors reported in Console (e.g. "Found cross-bounds GPT partition. GPT disk detected," mdworker cannot talk to sandbox, etc.).  The VantagePoint techs say the first step in a VM retry is to regain internet access to the Mac.
    Anybody who can help will become my new best friend. Thanking you.
    Message was edited by: Marmadukemark
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : Mark-PC
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Bluetooth Network Connection 2:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network) #2
       Physical Address. . . . . . . . . : 44-2A-60-CF-D0-93
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Wireless LAN adapter Wireless Network Connection 2:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
       Physical Address. . . . . . . . . : 32-9A-DD-9F-1D-FF
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Local Area Connection:
    I neglected to add that I'm using using ethernet with a cable modem. I'm the only user, so it's not networked for others. Below is the report that was generated with respect to the connection problem - when Boot Camp could not access the internet.
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
       Physical Address. . . . . . . . . : C8-2A-14-1B-EE-D1
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::a47a:3af7:72e6:f899%11(Preferred)
       Autoconfiguration IPv4 Address. . : 169.254.248.153(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.0.0
       Default Gateway . . . . . . . . . :
       DHCPv6 IAID . . . . . . . . . . . : 348662292
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-CD-DA-86-10-9A-DD-9F-1D-FF
       DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                           fec0:0:0:ffff::2%1
                                           fec0:0:0:ffff::3%1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Wireless LAN adapter Wireless Network Connection:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Atheros AR938x Wireless Network Adapter
       Physical Address. . . . . . . . . : 10-9A-DD-9F-1D-FF
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft 6to4 Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{077AEF3E-6752-42C5-A037-9FB69A17CB27}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{83EF0082-ADD7-4283-8303-9133BD882E39}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{22AA845D-6210-4549-AAE5-3D8917BA7286}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{D364C869-F7DD-4F9A-ADBA-7EBF53DD21D2}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes

    Are you using a MacBook Pro? Is everything installed on the same drive?
    I would love to know how that install was performed. When I install Windows under boot camp, my MacBook Pro drive ends up with 4 partitions: Mac, Mac Recovery, Windows, and a small partition that I believe is used by boot camp.
    Installing BitLocker on Windows requires the creation of a new small partition that Windows will boot off. The small partition is unencrypted, while the primary Windows partition will get encrypted. The following post discusses the maximum partition issue: https://discussions.apple.com/message/22753791#22753791
    Has anyone installed Windows through boot camp on it's own drive, and if so, can BitLocker be installed on that without reaching any partition limit? I'm assuming that's possible, but would like to know before I spend hundreds on new hardware.

  • Changes in server side java file not reflecting in Client side java code?

    Hi friends,
    iam using eclipse IDE, JBoss server, SWING GUI and Oracle DB
    ( looks like : SWINGGUI (Client) <--> EJB's (serverside) <---oracle )
    my problem is , when i make change in server side bean file, that changes are not reflecting in GUI programs.
    (for ex: iam adding settr and getter for a field and using that in GUI program. but its not identifying that setter or getter).
    please tell me what should i do for every change done to server side program, that should reflect / available to GUI?

    my problem is , when i make change in server side bean file, that changes are not reflecting in GUI programs.
    (for ex: iam adding settr and getter for a field and using that in GUI program. but its not identifying that setter or getter).what do you mean it's not "identifying" the methods?
    you have to call those methods you know
    are you getting NoSuchMethodError?
    please tell me what should i do for every change done to server side program, that should reflect / available to GUI?you haven't posted any code or error messages that might help us debug

  • How to change the color background in Pages for iPad?

    how to change the color background in Pages for iPad?

    You can find many themes at https://github.com/hdoria/xcode-themes  There's a download zip button on the right side of the page.
    Unzip and and copy the .dvtcolortheme files into /Users/YourUsername/Library/Developer/XCode/UserData/FontAndColorThemes Create the directory if it doesn't exist.
    If you can't find the Library directory you can get to it by using Finder's "Go to Folder..." option under "Go" or press shift + cmd + G then type the path.

  • Why is the price difference of apple products in different countries? For example in UAE price is different as compared to Germany?

    Why is the price difference of apple products in different countries? For example in UAE price is different as compared to Germany?
    MacBook Pro with retina price in US is USD1299 and same product price in Germany is 1299 Euro. Why???

    Obviously all the answers up here are true.. but I think that was not the real meaning behind the question.
    Every country has different currencies that not only convert differently to others but have a different and relative value for the inhabitants. For example although Forex says 1,3$ = 1€  for the average European and American 1$=1€.. that means that roughly inside your country what you buy inUS for 1$ you get in Europe for 1€ (ex: McDonalds hamburger).
    Also each country has it's own taxes, different renting prices (for apple store), different VAT, etc...
    But the real question is. Is Apple NEUTRAL to market conditions?
    This means... does Apple adapt their margin on products to local conditions or not?
    To make it simple... Let's say Apple ... everything considered... gets 100$ for an iPhone sold in US... Will Apple fix their price in other countries so that, after paying local taxes, local costs, etc... still.. for each iPhone they earn 100$ ??
    Or they have different market strategies such as rising the prices in countries where people are richer and more likely to buy iPhones even if "overcharged"? Or on the other side.. do they lower prices in poor countries (obviously not under production cost) to help locals buy in Iphone?
    I think that Apple is doing their best to stay neutral to the market.. that is... We want 100$ at the end of the day.. whatever...
    So we have paradoxes because in some countries iPhone costs more while in these countries people earn less  (and I think this is not random.. but happens because.. usually.. countries with more regulations and taxes are also countries with lower wages... but that's politics!)
    Here is a small comparison of iPhone 6 (16 Gb version) prices:
    USA 550€........................ Average GDP per person  51.704 $  (calculated with California sales tax)
    Switzerland 629 €............ Average GDP per person 44.864$
    United Kingdom 687€....... Average GDP per person 36.569 $
    Gerany 699€.................... Average GDP per person 38.666 $
    France 709€................... Average GDP per person 35.295 $
    Italy 729€........................Average GDP per person 29.812 $
    As you can see Apple seems not to care about living conditions in the country or about average wages etc.. they just have their price adjusted to local regulations and taxes. Europe has 2years warranty service for items sold in Apple Stores (and 1 for items sold in other stores where Apple is responsible only for the first year). We also have some other taxes... For example, here in Italy, we have a tax on hard drives (goes by the Gbyte) that affects any multimedia product. Tax is meant to finance artists whom you are supposedly "stealing" by having unauthorised copies on your portable device...  (I know.. is ridiculous). Etc...

  • Vendor error message in sourcing cockpit when change product category

    Hi there
    We are having a problem when changing the product category in the sourcing cockpit.
    The product category is linked to a vendor list. When you change the product category in the sourcing cockpit and choose a vendor by doing a vendor search and then click create purchase order, it still gives the error message "please choose vendor". Somehow it is not reading the vendor.
    Is there any way to solve this with a note or something?
    Kind regards
    Deepa

    Hi
    when you display the cart in work area , the vendor would have picked .i think you can see in one of the basic data .
    dont you try to prosose a source of supply and assign sos.
    i am not sure where mistake has happened ?
    can your business allows you to complete the cart and create a new cart since all our data is different
    once you change the product category.  for eg. it linked with purchasing group upon responsibility of product group and this purchasing group linked with purchase organisation internally and vendor....so..on .
    one small change product category impact data more..
    it is not recommend to change the product category here. product category may link with responsible purchase group and purchase group is linked with purchasers w.r.t purchase group .
    regards
    muthu

Maybe you are looking for