Change Report Status from "completed / passed" to "Completed"?

With Captivate 5, is it possible to change the Report Status from "completed / passed" to "Completed"? The "completed / passed" given is causing issues with my LMS thus need "Completed" only. Is this possible with version 5 or even version 6?
Thank you in advance for any help!

Hi There,
Thank you for reaching Adobe Community.
You can select the below settings from Edit > Preferences > Quiz > Reporting panel. You can change the Status representation to Incomplete > Complete.
Here is the screen shot frm ScormCloud LMS:
Thanks!

Similar Messages

Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

Hi
Using SPD i am creating list workflow.
Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
Please help me for automatic process.
What i should do to change the status to "Complete" automatically after manager approval
Regards
Jhanani
Janani.R

Hi Janani,
From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
we should be able to see the Approval task’s status.
Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Is it possible to change the status from Bid Rejected to Bid submitted?

Hi there.
We are working in SRM 4.0.
One user rejected a bid, but it was a mistake. Is it possible to change the status from Bid Rejected to Bid submitted?
We would like to modify the status from Bid Rejected to Bid submitted or Awaiting Approval to Bid submitted in order to solve errors.
Thanks and regards.
Raúl Moncada.

Hi ,
Use Function Module : BBP_PD_BID_STATUS_CHANGE
Supply Activity = 'QOSU' .
Regards,
Sachin S M

Change Build Status From PL/SQL

Apex 3.2
Please see my previous thread
Change Build Status From PL/SQL
We tried this code
CREATE OR REPLACE procedure APEX_030200.pr_sup_unfreeze_apex
as
begin
for l_app in (select id
                      ,security_group_id
                from APEX_030200.wwv_flows
loop
    wwv_flow_api.set_security_group_id(l_app.security_group_id);
    wwv_flow_api.set_flow_status (p_flow_id     => l_app.id
                                 ,p_flow_status => 'AVAILABLE'
end loop;
commit;
exception when others then
dbms_output.put_line (sqlcode);
dbms_output.put_line (substr(sqlerrm,1,250));
dbms_output.put_line (substr(sqlerrm,250,250));
rollback;
raise;
end;but recieved error
BEGIN APEX_030200.pr_sup_freeze_apex; END;
Error at line 1
ORA-20001: Package variable g_security_group_id must be set.
ORA-06512: at "APEX_030200.PR_SUP_FREEZE_APEX", line 51
ORA-06512: at line 1
Any ideas ?
If I just run
select id,security_group_id
from APEX_030200.wwv_flows
ID SECURITY_GROUP_ID
4000 10
4050 10
4155 10
4300 10
4350 10
4400 10
4411 10
4500 10
4550 10
4700 10
125 1.07701203277056E15
1000 1.08971536719791E15
1010 1.08971536719791E15
114 1.41432144152464E15
123 1.43440509319107E15
160 2.25192481868561E15
190 2.41432896355852E15
100 3.93632559648557E15
103 3.93632559648557E15
130 5.9543257997941E15
140 5.95501879180405E15
Edited by: Gus C on Nov 8, 2012 5:43 AM
Edited by: Gus C on Nov 8, 2012 5:50 AM

Hi Gus,
as Rod already mentioned, wwv_flow_api.set_flow_status would be the way to go. It's no officially documented or supported API but it will do what you want. Just be prepared that it might be removed in the future. The API is defined as following:
procedure set_flow_status (
    p_flow_id                   in number,
    p_flow_status               in varchar2,
    p_flow_status_message       in varchar2 default null,
    p_restrict_to_user_list     in varchar2 default null )Example code to make all applications unavailable (has to be executed as APEX_040200).
begin
    for l_app in ( select id,
                          security_group_id
                     from wwv_flows )
    loop
        wwv_flow_api.set_security_group_id(l_app.security_group_id);
        wwv_flow_api.set_flow_status (
            p_flow_id     => l_app.id,
            p_flow_status => 'UNAVAILABLE' );
    end loop;
    commit;
end;Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Cannot Change Item Status from Active to Inactive

Dear All
Cannot Change Item Status from Active to Inactive on Item master screen. can any one provide the steps.
Best Regards
Arifuddin

Check on below link under "Defining Item Status Codes"
http://docs.oracle.com/cd/E18727_01/doc.121/e13450/T291651T291798.htm#I_t_ditstatus
thanks

How to change a delivery from complete order to partial order

Hi,
We have create a delivery from a sale order that initially it was a complete order. During the picking of the TO we found a difference of stock of one unit. We asked to the client if they accept the partial order and they said that there was no problem.
We change the sales order from complete to partial, but the delivery is not accepting the difference, is always warning that we haven't arrive to the quantity.
I have read that there is no way to change the delivery so we have to delete it and create a new one. But we have a problem, the original one was of 56 pallets and all of them are done and label except the last one, if I delete de delivery I will have to move the TO again to the stock and dismount the 56 pallets, and repeat the picking, so, somebody knows a solution to avoid this and not move again everything just for one piece?
Thanks

Hi Allen
Well the problem is that the order is finished but with a difference os 1 unit of the 259 that we have to pick.
If I cancel the order I will have to move all the material to the bins that they proceed and repeat the picking with a new order to pick exactly the same amount of material that I have now.
The problem is, how do I make a new delivery and a new order but without moving the material to the bins and repeat the picking again?
Best Regards and thanks for your time
Edited by: enriquerolo on Mar 5, 2012 7:32 AM

How to change report size from A4 to A3 in Report 6i

I want to change the size of an existing report in Report 6i from A4 to A3 size. How to go about it? Thank in advance.
Anil chopra

Hello Anil,
Have you tried to click on the property palette of the 'Main Section' under 'Layout Model'. There you can set the Report Width and Height.
-Marilyn

Change work status from Excel interfase directly

Hi,
Anyone knows if there is a way to change the work status directly from the Excel interfase? I mean, with vba code or some function instead of using the web interfase?
Thanks.
Regards

Hi.
I have the same need in MS. I would like to change work status directly from Excel but don´t know how to do it.
Can you please clarify about the program UJW_WS_TEST? I don´t know what is this (it probably is different in BPC MS 7.5?)
Thanks.

MIGO : CHANGE FIELD STATUS FROM DISPLAY TO EDIT FOR BATCH

DEAR GURU
I HAVE CONFIGURED SHELF LIFE FOR OUR PLANTS. WHEN A PLANT USER CREATING RESERVATION FOR SHELF LIFE ITEM , SYSTEM IS ASKING FOR BATCH NUMBER & THEY ARE SELECTING ANY BATCH FROM F4 LIST.
AFTER THAT WHEN STORE USER IS CREATING ISSUE SLIP AGAINST THAT RESERVATION, BATCH NO IS SHOWING IN DISPLAY MODE . COULD WE CHANGE THIS FIELD FROM DISPLAY TO EDIT MODE, SO THAT IF PLANT USER ENTERED WRONG BATCH ,STORE USER CAN CHANGE IT DURING ISSUE SLIP.
REGARDS
RAJ

hi..
Please check.
MSC2N or MSC5N....

Make some values obligatory when changing notification status to completed

Hi!!
I would like "return delivery qty" and "def.qty (int)" to be obligatory values. Thus I don´t want them to be obligatory when creating the notification but when status chages to NOCO, Notification conformed.
Thanks in advance.

I have written some code in include ZXQQMU20 (which is inside exit EXIT_SAPMIWO0_020; which is inside enhancement QQMA0014). I have set a breakpoint in the beginning of the include. I have created notifications and also modified notifications and the breakpoint never appears.
Thanks.

Change system status from PDLV to DLV

Hi All
Please help me with this error. Already tick the delivery compeleted in Goods Receipt Tab but then system status won't change from PDLV to DLV. Is there any other way wherein I could change it?
Thank you
Jesielle

Hi Jesielle,
We're facing the same issue with you. The status remains at PDLV even though we had set the "Delivery Completed" indicator. This only happens to Production Orders that having multiple Items.
Please share on how you resolved this issue?
Thanks.
Regards,
Hooi Chia

Change Reports query from Form

Hi,
Can I use PL/SQL in a Form to modify or add to the Report's query in runtime?
i.e
If a Text Item in a form was left blank in then I would like to modify the WHERE clause
in the Report to remove one of the parameter defined.
in Report's query
WHERE a.myfield >= :p_1 and a.myfield <= :p_2
become
WHERE a.myfield >= :p_1
if the Text Item in form (for p_2) was left blank.
Any help would be greatful.
Many Thanks,
Buntoro

Hi,
you can use lexical parameter to do this thing
It's better if you change your query to
select * from emp where &where_clause
here,
where_clause is a parameter with some default value. U must give some default value to it.
ans then pass this parameter from form..
hope it will help you...
...

Need to change MRP status from Reserved to Fixed - AFS

Hi,
I need to change the MRP (allocation) Status (J_3ASTAT) from reserved (R) to Fixed (F).
transaction - j4ab
table - J_3ABDBS (AFS Requirement - Stock assignment) or any other table for this to be updated?
Do any one have any idea about the Function module or any other procedure to achieve this?
Thanks,
Nilanjana

Hi Nilanjana,
Yes. You could do this using J4AB.Allocation->Release.
In the j_3abdbs table, J_3ASTAT field would get changed from "R" to "F".
The include is /AFS/ARUN_MANAGEMENTTOOL_FCO0Q.
Best Regards,
Anitha.

Form Change it status from Query to others without any reason

Hello,
I have two forms(develper 10g R2) first one works fine if I call that form via menu and want to exit without any modification or insertion it will not ask for saving or cancelation but the second form ask every time for saving and cencellation when I call that form, without any modification/insertion the problematic form have three blocks first block is Control block(database block =NO) and when I called form the cursor moves directly in to the Control block and if I want to exit without touching anything it ask for saving/cancelling,
on exit I wrote code like this
IF :SYSTEM.FORM_STATUS <> 'QUERY' THEN
ELSE
exit_form(no_validate, full_rollback);
end if;
some one have idea why.
Thanks and Regards, Khawar.

Hi SIS,
I ran form in debug mode and continuesly monitor form status, it start with Status of NEW(is it normal??), since the status is new it ask for saving/cancel, I have another form(which behave normal) I did same with it, it also start with NEW status but when I assign a value to an item resides in Control block in WHEN NEW BLOCK INSTANCE trigger the form status changes to QUERY, so I applied same here and assign dummy value to dummy item, and it works fine.
Thanks, Khawar

Change Report Status Page?

After you run a report and use the destype=mail, the Oracle Report Job Status web page comes up. Is there a way to modify this page??? We do not want our users to see this page, and would like to create our own in its place.
Thanks,
[email protected]

hi,
did you ever figure out how to make this work? thanks.

Change Report Status from "completed / passed" to "Completed"?

Similar Messages

Maybe you are looking for