Change setings for logged clips?

Hello-
I've just logged a ton of footage but have just now realized that I've logged all of my clips with 16 tracks of audio, when I only need 2. This a problem because if I capture with 16 tracks of audio, my capture will stutter and drop frames.
How do I change the audio settings of logged, un-digitized clips in my bin?
Thanks,
Jason

Figured it out:
1) Change my capture settings to what I wanted (1V, 2A)
2) Select the bin I want to capture
3) Right click, select "Batch Capture"
4) In Batch Capture Window, UN-check the box for "Use logged clip settings"
5) FCP will then capture at whatever your current settings are
Thanks!
Jason

Similar Messages

Using bridge for logging clips

Do any of you use bridge exclusively for logging in your field clips? And if so, do you know if it is possible to then print out the results in order to have a hard copy? Thanks,

The Yahoo! Toolbar extension and the Babylon extension have been reported to cause this issue. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Wlst script to change values for Logging.

Hi,
i am trying to write a wlst script to change attributes for the following.( i am new to wlst scripting)
For all servers in a domain,
Logging --> General --> Check Limit number of retained files
--> Files to retain to different number.
--> Log file Severity Level
--> Standard out Severity Level
--> Demain log broadcaster Severity level
--> Memory Buffer Severity Level
Logging --> HTTP --> Check Limit number of retained files
--> Files to retain to different number.
I was able to figure out the path for some of the attributes in Logging --> General.
wls:/wl9xdomain/serverConfig/Servers/AdminServer/Log/AdminServer>
wls:/wl9xdomain/serverConfig/Servers/AdminServer/Log/ManagedServer1>
Can you help in finding the paths for above attributes.
And this is the sample script i wrote, and succeded in changing "Files to retain to different number" in Logging --> General.
connect('weblogic','weblogic','t3://localhost:7001')
edit()
startEdit()
cd('/Servers/AdminServer/Log/AdminServer')
set('FileCount',10)
validate()
save()
activate()
disconnect()
exit()
Thanks,
Krishna.
Edited by: user2656687 on Apr 15, 2009 4:46 PM

Thanks for the response. I was able to figure out that access.log file attributes are in /Servers/AdminServer/WebServer/AdminServer/WebServerLog/AdminServer.
And now i trying change script to apply for all the servers.
when i use for loop it is failing. any thougts on it. may i know the syntax in this case..
connect('weblogic','weblogic','t3://localhost:7001')
edit()
startEdit()
cd('/Servers/AdminServer/Log/AdminServer')
cmo.setNumberOfFilesLimited(true)
cmo.setFileCount(100)
cmo.setDomainLogBroadcastSeverity('Warning')
cmo.setMemoryBufferSeverity('Warning')
cmo.setLogFileSeverity('Warning')
cmo.setStdoutSeverity('Warning')
cd('/Servers/AdminServer/WebServer/AdminServer/WebServerLog/AdminServer')
cmo.setNumberOfFilesLimited(true)
cmo.setFileCount(100)
save()
activate()
Thanks,
Krishna.

How to change URL for "Log Out" link in CE?

We need the Communications Express "Log Out" link to go to a different page to the usual log in page. How can I change this?
I've found the logout function in the uwc/common/Header.jsp file which looks like:
function logout() {
url = "<%= getLogoutURL(request) %>";
top.window.location = url;
}and I've found the getLogoutURL fuction in the uwc/js/resourceBundleUtils.js file which looks like:
public String getLogoutURL(HttpServletRequest request)
    return UWCApplicationHelper.getLogoutURL(request);
}But I can't find where the URL is actually configured.
any help would be much appreciated.
Edited by: brett_ac on Jun 30, 2009 5:05 PM

brett_ac wrote:
We need the Communications Express "Log Out" link to go to a different page to the usual log in page. How can I change this?
I've found the logout function in the uwc/common/Header.jsp file which looks like:
function logout() {
url = "<%= getLogoutURL(request) %>";
top.window.location = url;
You got it in one. If you wanted the logout button to redirect to google you would set:
function logout() {
   url = "http://google.com/";
   top.window.location = url;Then restart the web-container.
and I've found the getLogoutURL fuction in the uwc/js/resourceBundleUtils.js file which looks like:
public String getLogoutURL(HttpServletRequest request)
return UWCApplicationHelper.getLogoutURL(request);
}But I can't find where the URL is actually configured.UWCApplicationHelper is in inbuilt java class. The UWCApplicationHelper.getLogoutURL java function returns:
<current URL context>/base/UWCMain?op=logoutSo for example if UWC is deployed to http://myserver.domain.com/uwc you would get a logout URL of:
http://myserver.domain.com/uwc/base/UWCMain?op=logoutRegards,
Shane.

Jdeveloper 11.1.1.5 - how to change path for log file for Disk quoto exceed

I am trying to deploy to my jdev integrated webserver and am getting Disk quoto exceeded error.
How do I change the path so it goes to /scratch/<user>/ ... or something other than /home/<user>
<Jul 7, 2011 1:53:01 PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file /home/<user>/.jdeveloper/system11.1.1.5.37.60.13/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>
Handler: '/home/<user>/.jdeveloper/system11.1.1.5.37.60.13/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log' raised exception when flushing.
Caused By: weblogic.store.PersistentStoreFatalException: java.io.IOException: Error syncing file, Disk quota exceeded, errno=122
#### Cannot run application TravelRequestApplication due to error deploying to IntegratedWebLogicServer.

Set the USER Home directory as explained here:
http://download.oracle.com/docs/cd/E21764_01/install.1111/e13666/ojdig.htm#BDCJCHDF

Changing clip name behavior for duplicate clips

Suppose I have one duplicate clip that I have copied into two bins, like so:
-- Sunday's clips bin
          - clip_name_one
and
-- Flowers bin
          - clip_name_one
If I change the name of one, I expect it to change the name of the other also, since it is the same clip, just placed in two different places (not two separate files). Instead it only changes in one place, like so:
-- Sunday's clips bin
          - clip_name_one
and
-- Flowers bin
          - clip_name_one_tulip
Is this intentional behavior? I can't imagine how confusing this will be for logging when I make duplicates in multiple places for organizational purposes. I may even end up with the same clip with multiple names. The same is true for the metadata associated with the clip - if I add a comment in the comment field, it does not propogate. Markers, however, DO propogate to both, which is exactly as I would expect. Why not the metadata?
Is there a way around this (short of never duplicating clips)?

I agree, Premiere Pro is a bit weird in what it does and doesn't carry across duplicate clips. For instance, you can interpret the frame rate for a duplicate different than the other version of it. But if you go to timecode and enter a changed start timecode it effects both instances. I get why you would want to sync both name and metadata, but I also see benefits to not syncing it. Either way, I agree the option should be there. There also should be an option like fcp7 has, to rename a clip based on file name, or rename a file name based on clip name (but there isn't).
That said, instead of creating duplicates of the clip in different organizational bins, you could create custom metadata columns. Therefore creating sort of a virtual bin.
You could do that by going to the top right of the project panel and clicking on the little down arrow. Then go to metadata display (while in list view). Then you can click on Add Property in the Premiere Pro Project Metadata area. Then you could do a custom property, decide whether you want integer, real, text or boolean. You'd probably want text. So you could choose text and name it Flower. Then you could hit ok. Go back to list view, and type in flower
Then in your project panel search box, type in flower and find all clips using it. A work around for sure, but may achieve what you want.
P.S. It would be much better if you could create a boolean field and just search by the word flower and everything checked would come up in the search. Unfortunately the search is a bit stupid when it comes to this. So if you search flower with a bloolean field, nothing will come up! You have to search true or false, and then ANY checked box will show. Quite dumb! Definite feature request!

I need to change my iCloud email address. I changed it for my Apple id but I can't log out of iCloud to change it there. Find my iPad is activated so I can't delete my iCloud account. I don't have the email address the iCloud login has anymore.

I need to change my iCloud email address. I changed it for my Apple id but I can't log out of iCloud to change it there. Find my iPad is activated so I can't delete my iCloud account. I don't have the email address the iCloud login has anymore so I can't have the password sent there. To sum it up, iCloud has an old email for the account log-in. I don't remember the password for the old email. I have Find My iPad activated so the iCloud account cannot be deleted. And I am already logged out of iTunes & App Store.

If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple IDand that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

Changing Media Start and End of Logged Clips

This should be really simple, and I'm sure I'm just overlooking something. I am trying to recapture some clips in Final Cut Pro and it was fine until I came to a clip that gave me the "timecode error - pre roll, post roll, etc" message. The Media Start on the problematic clip is at 00:00:01:04 - I want to manually change this time to allow pre-roll. The timecode in the "In" and "Out" sections isn't making a difference and seems unrelated - no matter what I put it to.
So I just want to edit the Media Start time as I'm sure this would remedy my timecode error when trying to capture... but I can't edit that field. What am I doing wrong? How do I change the Media Start time?
I could recapture the whole tape independently but I already have sequences edited based on my previously logged clip. Any help would be greatly appreciated. Thanks!

If you are re-capturing then you must have used Capture Now to get the clip first time round or you would have run into the same trouble with pre-roll. You'll have to capture the clip again using the same method. Of course, the chances of getting the same start and end code using Capture Now are slim, but if you can get in earlier and out later then you should be able to manually re-connect the clip.
rh

How to change the auto generated thumbnail images for a clip?

When iMovie created all the thumbnails for my clips it got most of them right, but on some of them it has choosen a frame that doens't really represent that clip.
Is there any way to change the poster frame for each clip?

Hi,
Afte uploaded record it create internal number (Personal ID), and it get stored in table MESSTAB. And that internal number is stored in field MESSTAB-MSGV1. Use this MESSTAB-MSGV1 field for the further use.
Hope, it will help you.
Thanks & Regads,
Poonam.

Using a change document for Z table maintenance generatro to log changes

Hi Forum,
I have created a a change document for one of the Z tables now I want to use it in the table maintenance generator of this table so that any changes made to this table using maintenance generator are logged in table CDHDR and CDPOS.
I am using the event 02 After saving the data in the database
and have created a new FORM..ENDFORM for this event and it is working fine till here.
But I am unable to find any table or structure where the information of the action performed in maintenance generator is kept for eg. what action was performed like add, delete or change and on how many records and contents of those records.
I can update the tables CDHDR and CDPOS only if I have the above information.
Please guide me as to where can I find all this information within the maintenenace generator program?
Thank you,
Anubhav

Hello Anubhav,
Are you calling the change document function module in your save event ? The function module needs to be first created using SCDO for your Z table, select the fields on which you want to track the changes. Auto generate the programs for this change object. Once the FM is generated, you will have to call this FM in your SM30 event.
The change document tracking also needs to be enabled at the data element level..
Regards,
Jay

Changing sampling time for logging data in DSC

currently I created lots of shared variables by Modbus server. I'm wondering when I active logging data to Citadel, there is any option for change sampling time for logging data or not. I only saw option for changing base on percentage of value differences.
Since I want to export them to MS Excel later, I want decrease the number of sample datas by decreasing sampling time.
Thanks in advance.

This is my idea that i try
First, I add Enqueue Message for Enable time case
Then, I create Enable time cases and write box diagram fallow below pic.
But when i run program,it don't work, time don't count
Please help me.

How can I change the duration for all clips in iMovie 10.2

How can I change the duration for all clips in iMovie 10.2? I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

How to config History Log Changes Document for Mkt Plan/CPG/TP?

Working in SAP 4.0...
Dear Expert,
I want to save the document changes for Marketing Plan, Campaign and Trade Promotion.
How to config the document changes, since the information that recorded not complete.
Please help....
BR,
Robin

Hello Robin,
In CRM 4.0 follow the below path:
SPRO --> Customer Relationship Management --> Marketing --> Marketing Planning and Campaign Management --> General Settings --> Edit Categories for Change Documents
Then maintain the entry for application as MKT for each entry, then under object type: CPG, CPT, MPL, MPT, TPM, TPT and then Check box the entry under change document for all the entries.
If you want to display the change log history use report : CRM_MKTPL_CD_DISPLAY in CRM 4.0
Thanks & Regards
Raja Pamireddy
CRM Marketing Forum Moderator

HT201250 How do you stop a Macbookpro with OSX 10.7.5 from turning off or logging off before timemachine is finished with the backup even though I have changed settings for energy management to "never" shutdown when plugged in to an outlet?

My problem is my Macbookpro mid 2010 with OSX 10.7.5 seems to turn off or logs off before timemachine is finished with the backup even though I have changed settings for energy management to "never" shutdown when plugged in to an outlet?

I had this problem on an IMac and I finally found a solution in an unlikely place. The problem was a security setting. I don't remember right this moment the exact setting and I am not on that machine right now but when I am I will try to retrace my steps to the fix. In the meantime check your security settings and any browser or browser extensions for computer log off settings. These settings are intended to prevent unauthorized use and incidentally screw up your backups. Hope this helps.

Change documents or logs for Analysis authorisation access changes

Is there a way to review the change history or table logs in BI 7.0 to show who assigned analysis authorizations and when it was assigned or removed? I presume there should be a SUIM change document that shows the Analysis authorization access changes that are assigned directly to users via RSU01 or RESEADMIN when these analysis authorizations are not included in roles.
An example area of concern is with the assignment of 0BI_ALL, having an accurate log or mechanism to track the assignments to users.

Hi Srinivas,
you can activate in DDIC that your entry changes will be logged.
Go to SE11 -> Your Tablenname -> CHANGE
Button TechnicalSettings -> Activate checkbox Log data changes.
From now on any chenge will be logged in table DBTABLOG.
Kind Regards
Henner

Change setings for logged clips?

Similar Messages

Maybe you are looking for