Change size and colour of leds (run mode)

I´m doing an interface with leds and I need that the user can change the colour and size of the leds while the VI is on the run mode.
This means that you run the VI and then you can change the colour and size of the led, so you can see that led with that requirements in the next sequence (flat sequence) or even in another VI. This means you save that information of the led.
I don´t know if I have explained it clearly.
Thank you

Yes it is possible. Just go for the create->property node->then choose item you want to workup. Also, if you don't know how to control just add control(right clicking the terminal) and see how it controls. Then add your own controls to a cluster.
I have still not got what I love.....
Attachments:
change_led.vi ‏11 KB

Similar Messages

Change text size and colour of report values ?

Hi,
I have a formula as part of a BEx query in version 3.5 and I'd like to make the values of this formula stand out more by either changing the text size of this one row and/or changing the colour.
I've already selected the "highlighting" option but this only changes the colour to a light blue colour.
Does anyone know if it's possible to change the text size and colour of one or more rows of a report?
Thanks.

HI Mark,
Greetings.
Your requirement can be met by using exceptions. It can not change/increase the text size but it can give you color coding based on the conditions you set while creating query.
Open your query in Designer and click on exception button on the top menu bar. Define your condition on whatever key figure you want to get the color coding and execute your report.
Let me know if this is what you were looking for.
Thanks
Sachin

How can I see the size and colour of text in DW Cs5?

Hi forum, how do you see the size and colour of a piece of text in Dreamweaver Cs5, I have some text in a dreamweaver file which is a size I like and a colour I like and I want to make a CSS rule with these characteristics. How can you see what size and colour a piece of text is?
Many thanks for any help
Gareth

<td height="89" colspan="5" valign="top"><p><font color="#FF0066" size="-1" face="Arial, Helvetica, sans-serif">what is the text size, colour and boldness of this piece of text.</font></p></td>
Above code is deprecated. CS5 will not pick up these styles in the CSS styles panel. Legacy sites are not simple to work with. They need to be converted to modern standards. You do this by stripping the HTML styles from markup and re-writing styles to CSS.
<p>This is a normal paragraph</p>
Put your CSS styles between your document's <head> and </head> tags:
<style type="text/css">
p {
color: #FF0066;
font-size: small;
font-family: Arial, Helvetica, sans-serif;
</style>
Or, create an external stylesheet to which your HTML documents are linked like this:
http://alt-web.com/DEMOS/DW-Link-Stylesheet.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to add text in .ai file and set position, font, size and colour

I want to place multiple lines of of text (individually) into .ai file and set size, font, colour and position for each.
Preferably text should have origin in a single point (rather than be framed)
Hope anyone can help me out.
Thank you in advance.

Here's what's in the Scripting Reference
Creating and modifying text frames
// Creates a document with text frames displaying path, area and point
// text, changes the content of each frame then deletes the 2nd frame
// create a new document
var docRef = documents.add();
// create 3 new textFrames (area, line, point)
// Area Text
var rectRef = docRef.pathItems.rectangle(700, 50, 100, 100);
var areaTextRef = docRef.textFrames.areaText(rectRef);
areaTextRef.contents = "TextFrame #1";
areaTextRef.selected = true;
// Line Text
var lineRef = docRef.pathItems.add();
lineRef.setEntirePath( Array(Array(200, 700), Array(300, 550) ) );
var pathTextRef = docRef.textFrames.pathText(lineRef);
pathTextRef.contents = "TextFrame #2";
pathTextRef.selected = true;
// Point Text
var pointTextRef = docRef.textFrames.add();
pointTextRef.contents = "TextFrame #3";
pointTextRef.top = 700;
pointTextRef.left = 400;
pointTextRef.selected = true;
redraw();
// count the TextFrames
var iCount = docRef.textFrames.length;
var sText = "There are " + iCount + " TextFrames.\r"
sText += "Changing contents of each TextFrame.";
// change the content of each
docRef.textFrames[0].contents = "Area TextFrame.";
docRef.textFrames[1].contents = "Path TextFrame.";
docRef.textFrames[2].contents = "Point TextFrame.";
redraw();
docRef.textFrames[1].remove();
redraw();
// count again
var iCount = docRef.textFrames.length;
Your are looking stuff with the pointTextRef.

Is there a fast way to change size and Res in multiple photos?

I have cs5 and am trying to change 70 to 100 photos from 4288x2848 300ppi psd, To 1000x664 at 72ppi jpeg quickly. Is there an easy way? If there is not a fast way to do it what is the best way to do it? Any help would be appreciated.

Yep it can be done in bridge.
First copy the files to another folder for protection.(just in case something went wrong)
Select all of the files then click the export tab (may need upgrading of bridge to see the tab, not sure)
Double click save to hard drive,
The Image options tab will let you change the size of the image. However it looks like the resizing is restrained only and does not offer a ppi setting.
Your other option is to use image processor.
First create an action that will change the ppi.
Now it just a matter of running image processor and tell it what folder has the images you want changed, what folder you want the new images at, The file type and file size, and finally the action you just created.
image processor can be run from photoshop (file>scripts>image processor) or bridge (tools>photoshop>image processor)
Whether or not ppi has to be change depends on what you are using the images for. Prints require it to set the print size, for the screen it is not required since the screen has no way of knowing how to use ppi.

How to change size and position of default TOC

Is it possible to change the width, height and position of the default TOC menu in Captivate 6?
Currently the default TOC menu goes from the top of the window to the bottom. In order to fit better with the graphic UI we are using for the course it would be better if the TOC could be positioned about 40px from the top of the window and end about 50px short of the bottom. I can find no way to change the size and position of the TOC from within Captivate.
I have tried changing the CSS stylesheet for the HTML version and that will work but it does not work for the SWF version.
Thanks,
Richard

Hi Rod,
I am hoping that you are still following this thread. I have a client who really wants to be able to changes the size and position of the default TOC and you mentioned that it would require extensive AS3 coding. I am hoping that you can give me some idea of where the AS3 files are located that I would need to take a look at. I am working on a Mac using OSX 10.7
Thanks,
Richard

Change presenter note font size and edit notes in slideshow mode

Hi, I just switched to Keynote 5.03 and am still learns its features. I have some questions about the slideshow mode of keynote
1. While in slideshow rehearsal mode with presenter notes showing, is there a way to zoom in on the notes to make the text bigger as you can in Powerpoint, which allows you to zoom up to 400%? This is handy: I can magnifying the notes without having to change its font size, hence no need to exit the slideshow mode.
2. Powerpoint lets you edit the text of notes on the fly during a slideshow ("view presenter tool" mode), is there a way to do this in Keynote?
3. The slide thumnails (allow you to jump to a certain slide) on top of the presenter screen are always very fuzzy, is it possible to increase the resolution to get a higher quality image?

I believe that all of these are limitations of the current version of Keynote.

How to Batch process a .jpg into multiple image sizes and colour modes

Hi,
I am needing to find an action or script that when run on a batch of Jpgs will open them up run a few actions and save them as 4 different files as follows
start file:
image.jpg
end result:
image_RGB_300dpi.jpg
image_RGB_72dpi.jpg
image_CMYK_300dpi.jpg
image_CMYK_72dpi.jpg
At present I have 4 separate actions set up do do this so I am running the batch process 4 times to get this result, is it possible to combine multiple actions into a single batch process?
thanks for any help on this one.

> At present I have 4 separate actions set up do do this so I am running the batch process 4 times to get this result, is it possible to combine multiple actions into a single batch process?
Record an action that calls the 4 actions?
-X
for photoshop scripting solutions of all sorts
contact: [email protected]

Fonts change size and content when edited in photoshop cs6

When I try editing the type in the document created in Photoshop CS6, some of the fonts I click on change their size, formatting as well as content of what it says.
It also started happening when I try changing canvas size. All of the fonts that got corrupted somehow, changing their formatting and content as I'm changing the canvas size.
The document has been created from scratch..
thanks for your help ahead of time!
Lana

I've reset my brush, so "replace current brushes with the default brushes" was taken.

How to change username and password for already running mappings

Hi Gurus,
We have created so many mappings(more than 200) in owb 11g and deployed them into production and all are running without any issues.
Now we are in big problem and the reason is our internal team is asking us to use the new user and password.
Please let me know what are the best possible ways to change and in which places we need to make changes.
Thanks in advance... Please help.

Hi,
Here are the steps you need to foloow:
1)Unregister the location that is currently associated with the module that has the mappings
2)Edit the location information in the designcenter and change it to reflect the new values
3)Register the location again with the control center and redeploy the maps
Regards,
Pnreddy

Changing size and resolution with pl/sql

Hello,
does someone know if it is possible to change the resoultion and size of an uploaded image with pl/sql?
we want to upload an image over a webform and want to save it in the database, but before saving it, we want to change the resolution to 72 dpi. Our webapplication is a PL/SQL application and we are using oracle application server 10G, release2.
Thanks in advance.

Hi,
Check out ORDSYS.ORDImage type from Oracle Intermedia, and especially its "process" method.
It possesses various commands to change image properties.
HTH.

My desktop Icons Change Size and Spacing Without My Permission?

This morning, all was well. The icons on the desktop were small and their text was 10pt and the spacing was reasonably tight. I left the house to run some errands and when I came back the icons are all 48 x 48, the text is 12pt and the spacing is at its maximum. If I have any folders left open (which I do for work in progress) they are all showing the home folder and there is no way to go back to where they were before.
This seems to happen about once a week. It is annoying.
I am assuming it is a sleep related problem. How do I fix it?
Thanks.

Firefox shouldn't change the icon of anything except files you set for it to open as deafult. For example, if you have an HTML file on your desktop and set Firefox to open it by default, it will change the icon to Firefox.

Changing size and color of mouse pointer...How? OSX 10.9.1

I'm having problems seeing my mouse on the screen. It's really frustrating sitting down and not finding it, immediately.
How do you change it? I just can't find it.

Adjust cursor size in System Preferences > Accessibility > Display

CSS Browse Tab When Refresh Page Changes Size and Jumps to Right Size

I'm styling a site and I must have changed something I shouldn't have.
Issue: When I click on the refresh page, the "Browse" tabe in the ribbon on the home page jumps smaller and then back to right size when the page loads. Anyone have any ideas what could be the culprit?
If I click on the tabs the size remains static, this only happens when I refresh the page.
It's really bugging me, any help much appreciated.

This could be related to the "caret browsing" feature, which moves the cursor through the page when you scroll with the arrow key. Or maybe in this case skips around things in the page.
You can turn that using either:
* F7 key
* "3-bar" menu button (or Tools menu) > Options > Advanced > General mini-tab > ''uncheck'' the box for "Always use the cursor keys to navigate within pages"
Any luck?

Need help changing size and aspect ratio for 500+ images

Thank you for reading this! I have about 500 images of people in different poses. They're all extracted on a transparency as PNGs. They vary in aspect ratio, dimensions and position of the person within the frame - for some the feet are very close to the bottom of the frame and for some, they're higher up. I need to equalize all 3 of these qualities, so that if superimposed, they look like a video unfolding with the same zoom. My ideal size would be 800x800 at 300ppi.
Is there a way to batch even a part of the process and keep the png format? I had the images in PSD initially but they were too massive so creating catalogs with them was prohibitive.
If not possible to do a batch, what would be the best (easiest) and fastest way to do it? I'm thinking that maybe creating some template where an oval shape the size of the head can help create consistency of the size of the person and a line that helps set up the distance from the bottom?
I so appreciate any help you have to offer. Part of my problem is that I don't know what these processes are called so I don't even know what to search for. If you can even name the actions that I need, it would be of great help. I already paid a designer to do the extraction and they were supposed to do this formatting as well and they didn't so my budget is shot. I'm hoping that if I understand what the steps are, I can do them myself.
Thank you!

If you download my crafting actions package you can record an action that uses one of my plug-in scripts to do that process. You could then batch that action and process your 500 png image files.
Crafting Actions Package UPDATED Aug 10, 2014 Added Conditional Action steps to Action Palette Tips.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
More then a dozen Scripts for use in actions
Example
Download
Step 1 Select layers transparency
Step 2 Copy
Step 3 Paste
Step 4 Select all
Step 5 Align Layer s to selection vertical center
Step 6 Align Layer s to selection horizontal center
Step 7 Select bottom Layer
Step 8 delete current layer
Ste9 9 Fille>Automate>AspectRatopSelection... In the dialog set 1 1 ratio center rectangle replace selection feather 0
Step 10 Image Crop
Step 11 File Automate>Fit Image. In dialog enter width and height 800
Step 12 Image size in the dialog uncheck Resample and enter 300 in the resolution field.
I'm sure the should work you mane not need the copy paste and it depends on how Photoshop treats the PNG layer the canvas size or just the pixels.
This may also work
Step 1 Select all
Step 2 Align Layer s to selection vertical center
Step 3 Align Layer s to selection horizontal center
Ste9 4 Fille>Automate>AspectRatopSelection... In the dialog set 1 1 ratio center rectangle replace selection feather 0
Step 5 Image Crop
Step 6 File Automate>Fit Image. In dialog enter width and height 800
Step 7 Image size in the dialog uncheck Resample and enter 300 in the resolution field.

Change size and colour of leds (run mode)

Similar Messages

Maybe you are looking for