Change spacing between "LED's" in 2D boolean array indicator

Hi All
In my application I am tring to mimic a LED matrix sign using a 2D boolean array indicator. Its obvious enough how to chage the size of the LED's in the array indicator but I would also like to reduce  the spacing between LED's as I have very small leds with two much space between them!!
Could someone kindly send me an example or tell me waht steps to take using customize indicators function etc.
Also can this be changed programatically using property nodes, so for instance i can resize the spacing to mimic LED signs with different LED densities?
Many Thanks!
Tristan

Hi Tristan
You could try customising the boolean in your array.  Right click on an element of your array, select Advanced->Customise....  You can then modify the appearance of the boolean to your requirements, using decorations for example to modify the spacing.
You will be prompted to update your array with the modified version once you have finished your edits.
Had a quick play, see attachments
Hope this helps
Steve
There are 10 types of people in the world that understand binary, those that do and those that don't.
Attachments:
ModArray.vi ‏9 KB
ModBoolean.ctl ‏6 KB

Similar Messages

  • How to change the elements number in Number To Boolean Array Function VI

    Hi, I'm working on using the DAQ digital output to control the digital input of a DAC, and I used the Number To Boolean Array Function. VI to convert the number to a Boolean array. The maximum number should be 4096, therefore it should consist of 12 elements.
    For the description of the VI, it says Boolean array returns an array of 8, 16, 32, or 64 elements, depending on the number of bits in the integer. Therefore, I change the number of the channels in task to 16, but it still doesn't work. Any suggesitions are greatly appreciated.
    Thanks!
    Possible reason(s):
    Write cannot be performed, because the number of channels in the data does not match the number of channels in the task.
    When writing, supply data for all channels in the task. Alternatively, modify the task to contain the same number of channels as the data written.
    Number of Channels in Task: 12
    Number of Channels in Data: 32
    Task Name: _unnamedTask<1B>
    Solved!
    Go to Solution.
    Attachments:
    DAC test.vi ‏47 KB

    Once you have the boolean array, you can resize it using array tools. For example you can use "reshape array" with a lenght of 12 to trim the array to 12 booleans elements (you can also use array subset).
    LabVIEW Champion . Do more with less code and in less time .

  • How to change spacing between text boxes

    In Pages, when I change something to multiple columns, it actually adds a large amount of space between what appears to be text boxes. If I enable "Show layout", it shows a border around the various "boxes" with the white space between them. How do I reduce this space and or remove it.

    Hi csing,
    In a document from the "Informal Resume" template, I turned on these settings in the View Menu to help me see how the document is arranged:
    Here is a some screen shots of the document. I added Borders to the text boxes for clarity. My notes are in red.
    In My Humble Opinion, this template is all over the place like a mad dog's breakfast. Use the template for ideas. Then create your own template from
    Menu > File > New from Template Chooser > Basic > Blank.
    Regards,
    Ian.

  • How can I add a True value to position (0,1) in a 2*2 boolean array?

    Hi everyone, let's say I have a 2*2 boolean array (Indicator), how can I let the element in position (0,1) for example be true??
    Thanks.
    T. A.
    Solved!
    Go to Solution.

    Hi T.A.,
    1) ReplaceArraySubset with indices 0&1 and element=TRUE.
    2) OR Array with an array constant of [(F,T),(F,F)]
    Message Edited by GerdW on 11-23-2009 03:22 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Change Popup LOV template to put more spacing between rows

    I am trying to change the popup lov template to include a bit more spacing between the rows in the result set. So instead of seeing
    Test 1
    Test 2
    I want to see
    Test 1
    Test 2
    Looking at the html produced the rows are returned from a bit of javascript (using arrays and passback) and I can't figure out where to add anything that will change the spacing ie cellspacing doesn't do anything.
    The line I am interested in is - replace ( for < and ) for >
    document.writeln("(br /)(a href=\"javascript:passBack(v[1], v2[1]);\")Test(/a)");
    If I could just add a br at the close a tag...
    Does anyone have any ideas on this. I'm not keen to code a new popup lov, I was just wanting to tweak the existing.
    many thanks

    Hello,
    " I know this style isn't directly related to the t5PopupBody as you have suggested but it doesn't seem to make a difference"Your syntax will apply the new style to every link on your pop-up window. As there is non-others then the results, in this case it will make no difference.
    " I did something slightly different so I didn't have to worry about changing the css"That is OK, as long as you remember all the changes you are making to the original templates, because after upgrading – like in the near future to version 3 – some of the changes might disappear. That is why I prefer to use my own CSS file, on top of the original one.
    Regards,
    Arie.

  • I would like to change the spacing between the words for the product names, they look double spaced at present.

    A simple question I think, I would like to change the spacing between the words for the product names, they look double spaced at present. On the home page, and product pages. Not sure where to change this in the css here is the site; http://top10shop.businesscatalyst.com

    That site is using an old font technology called cufon, it uses canvas to draw the text into the font you want. Not really good for modern websites.
    It is what the font was and how it was made. I never used Cufon but the documentation is here - Usage · sorccu/cufon Wiki · GitHub At a glance there are no render options for the double spacing so I am guessing it was how the font was generated.
    I would scrap all of that completely tbh.

  • How to Change the Spacing Between Bullets on a List

    I used to use Microsoft Expression and I could change the spacing between bullets on a list by formatting the paragraph and changing the spacing.  In Contribute I don't see how to do that.  I tried to Edit Roles under Administer Websites so it would be 2 lines after paragraph, but that doesn't help.  So if I want to increase the spacing between bullets on a list, how do I do that in Contribute?
    Steve

    Please log an Enhancement Request thrown, https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=9
    or make a suggestion for Contribute next.

  • Is there a way to change the spacing between footnotes in Pages on OS Mavericks?

    I am trying to write a paper for a class I am taking but cannot seem to change the spacing between footnotes in Pages. Can anyone help me out with this?

    Yes.
    Click on the footnotes in Pages ’09 or v5.2.2.
    In Pages ’09, in the Document Inspector, there is a section called Footnotes & Endnotes.
    In Pages v5.2.2, a new Footnotes tab will appear.

  • How do I change the spacing between lines in Pages 5.5.2?  Single spacing prints more like double spacing.

    How do I change the spacing between lines in Pages 5.5.2?  Single spacing prints more like double spacing.

    In the Format panel under the Text Style tab, there is a ▸ Spacing category. Click it to open, and you will have a selector that defaults to Lines, and to the right, the ability to set your spacing in decimal values. In addition to Lines, you also have At Least, Exactly, and Between capability. You can even set exact line height  in points. Check that your Before Paragraph, and After Paragraph settings are correct for your needs.

  • Spacing between components change due to screen resolution

    Hello All,
    I am using GridBagLayout for desiging a screen for my application. I had defined the spacing between each component and had run the application in my system. It is working fine. But if the same code is run from another system with a different screen resolution, the spacing between components get altered. Can you plz give a solution to make the spaicing between components fixed despite the screen resolution.
    Thanks in advance.

    how do you mean this? did you define the insets of the constraints for some components? normally they don't belong to the screen resolution, because the frame has a size that is calculated with the sizes of all it's children. or do you have the frame maximized?

  • ABAP webdynpro how to give spacing between the UI Elements in a view

    Hi Expert,
    I am very new to webdynproapplication development. I am stuck in changing the look of the ui  elements of the view.
    Cud anyone explain  how  to set the spaces  between the  UI Elements on  a View is there any method ?
    I have set the Layout property  to Matrix layout. But here I am unable to set the spacing between the deffernet elements  as it is taking it automaticaaly  and I am not able to allign  all the  Elements.
    Need your help!.............thank you
    Moderator message: wrong forum, please have a look in the dedicated "Web Dynpro ABAP" forum.
    Edited by: Thomas Zloch on Apr 15, 2011 10:17 PM

    Hi anushree.,
    If u are using matrix layout:
    In Layout Data select MatrixHeadData to display UI in next line.,
    If u want to give space  between UI elements in the width enter 50, 60, 70 or what ever space u want.
    Also in the vGutter u can select medium ,  large ,  medium with rule  to give space between UI elements.
    n if u want to give space between lines  ., in the height enter 30 40 or whatever spacing between lines u want.,
    Matrix layout is a good layout., and u can play with colspan , hAlign, vAlign, vGutter, width and height options.,
    If u dont like the layout with these options then use Grid layout., where u can give custom spacing., with the help of Left Padding, Right Padding, Top Padding, Bottom Padding.
    reply if u need some more clarifications.,
    Thanks & Regards
    Kiran

  • How to change space between folder icon and text on personal toolbar?

    I have a few folders on the personal toolbar with just a letter to indicate what they are, but on the theme I'm using, the letter is too far away from the folder it belongs to and partially falls under the next folder icon. I don't want to increase the spacing between all icons to show the full letter, as this decreases the amount of icons you can have on the toolbar. Instead I want to decrease the space between the folder and text belonging to it, so it's right next to it instead of 5 pixels away.
    I've found various entries to change padding and margins in userChrome.css, but it's always for around the icon, I don't know where to look to close the space between the icon and its corresponding text.
    Any help would be greatly appreciated, thanks.

    Did you check the value of the margin-left of the text?
    You can set negative margin values if necessary.
    <pre><nowiki>#PlacesToolbarItems .toolbarbutton-text { margin-left: -2px !important; }</nowiki></pre>
    Add .bookmark-item[container] if you only need this for folder items
    <pre><nowiki>#PlacesToolbarItems .bookmark-item[container] .toolbarbutton-text { margin-left: -2px !important; }</nowiki></pre>

  • Adjusting Spacing Between Thumbnails

    Minor but annoying problem here. I don't know what I did but somehow all my thumbnails are now spaced REALLY close together (like, 1/8 of an inch apart). They were not like this before. I've tried adjusting the slider at the bottom right hand corner but that only changes the size of the thumbnails themselves, not the spacing between them. Having them so close together really makes it a pain in the a** when I'm trying to highlight a bunch of photos with my mouse. Any suggestions...?

    Press "u".
    Toggling the Browser Metadata Overlay off enlarges the thumbnails and moves them closer together. Handy, actually -- but not knowing how to control it makes it frustrating.
    If you don't know what the Metadata Overlays are -- now's the time to learn. Search the forum or the [User Manual|http://documentation.apple.com/en/aperture/usermanual/index.html#chapter =11%26section=2%26tasks=true], and ask if you have any questions.

  • Spacing between two line types in smartform

    I have data in two different line types as below
    line type1
    linetype2
    but what my requirement is
    line item1
    line item2
    i had tried by changing the smart style but it dint work. Please help me out in reducing the space between the datas of the line types.

    Hi
    Go to your smartstyle.
    Go to your paragran format.
    Click on tab Indents and Spacing.There you will see a field named LINE SPACING.In that you can adjust the spacing between two lines.
    Regards
    Khushboo

  • Spacing between lines - I'm an idiot

    Hello,
    I am used to Appleworks, and Pages is proving tricky for me. This is probably an idiotic question, but HOW do you set it to change from single to double or triple spacing between lines? This is my first posting, and I would be so grateful for an answer.
    Farnsworth
    Mac OS X   Mac OS X (10.4.4)  

    No, you're not an idiot. The space after lines setting is similar in AppleWorks & Pages, it's just that it's turned on by default in Pages & not in AppleWorks. In Pages go to the text inspector (the big T) & adjust the line & before/after paragraph spacing to your liking. By default, 12 point after paragraph spacing is set in the default, blank template. While you're making these changes, you might want to consider making any other settings such as font, margins, etc. & saving the document as a template you can use for your default.

Maybe you are looking for