Change the Hide/Show text in a OATable

Hi All,
Be default when you add a detail region to the table, it displays the text Detail as column header and Hide/Show text in the column(along with +/-). I want to change the text to something else.How can i do it.How do i access the bean programatically?
Thanks
~

Hi,
It is not possible to change the text of the hide/show header.You need to log an ER with oracle to get this fixed.
Regards,
Guru Krishnan V.

Similar Messages

I am unable to change the color of text in an email I replay to or compose. I am on 31.6.0 release of Thunderbird.

When I receive, reply or compose email. I no longer am able to see or change the color of text. I select to change the text from black to Red (or any other color) and the text just stays black, The color seletor box will show the last select color, but never actually changes the text color in an email. Also in received email, when the sender has indicated their replies to me are in another color, All the text only appears as black. I never had this problem in the past, not sure what has happened. I did restart Thunderbird with add-ons disabled and this did not change the problem.

Hello, maybe the question need to move by a moderator to thunderbird support ?
https://support.mozilla.org/en-US/questions/thunderbird?owner=all
thank you
[moderator note: question thread has been moved from Firefox queue to Thunderbird queue]

Can I change the reort total: text in the summary row in a report region?

Hi all,
This might has been asked before, I tried searching the forum but couldn't find an answer. In the report attribute, if I tick the sum checkbox then run the page, the last row would give me the summary numbers which is what I want. However is there a way I can change the "report total" text in the last row of the first column?
Thanks very much for your time.
Pete

Hello user9546327,
I had the same problem, until I realised that the text seems to be printed under the first column of the report. If that one is a hidden column, the text won't be printed in the report.
Solution:
In the 'Report Attributes' tab, move the first visible column (= attribute 'Show' is ticked) to the top of the report columns.
Best regards,
Sabine

May I know how to change the color of texts inside the indicator box?

Can anyone tell me how to change the color of texts inside the indicator box? I have tried to use property node but not really know how it functions.
In fact, I am writing a program for which the number inside indicator on front panel will show red color if the measured value can't reach the requirement. I am using LabView 6.1 Professional
Thank You for your attention!!!!!!

Simply use a property node with "NumText.TextColor" and wire the correct color depending on your test result.
The attached simple example (LV 6.1) lets you change it from the front panel. In your case, you would use your test output instead of a FP switch, of course. Message Edited by altenbach on 05-25-2005 09:05 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TextColor.vi ‏18 KB

DetailStamp - Don't want the Hide/Show feature

Hi,
Showing master with detail table using detailStamp facet and following the the instruction posted to expand all initially.
Is there a to skip the ">Hide" and "+Show" altogether?
I tried to switch using af:showDetail instead of detailStamp and is able to only show icon with no text of show/hide but the default expansion is no longer working.
Any help is appreciated.
Mel

My view source is actually showing x2n x5y for the Hide/Show cell but wrapped inside a div.
<td class="x2n x5y" nowrap><div><a onclick="return _submitHideShow('_id37',1,'hide','masterTable','masterTabledd1','1')" href="#" id="masterTabledd1"><span title="Select to hide information" class="x52">▼</span></a><a onclick="return _submitHideShow('_id37',1,'hide','masterTable','masterTabledd1','1')" href="#" class="xl">Hide</a></div></td>
So I tried to do the sugesstion
<afh:head title="My page">
<f:verbatim>
<style type="text/css">
.x2n x5y { display: none; }
</style>
</f:verbatim>
</afh:head>
and it didn't worked.
I have also tried .x2n .x5y which does not worked too. However, if I do just .x2n, it works but all the .x2n cells content disappeared which is not what good.
Any more ideas would be greatly appreciated.
Mel

How can i change the column label text in a alv table display

how can i change the column label text in a alv table display??
A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
<i>* declare column, settings, header object
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
get column by specifying column name.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( ' ' ).</i>
My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
<i>"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."</i>
i have checked in debugging and the error occured at the statement :
<i>lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).</i>Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
Thanks,
Suri

I found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
         lr_if_controller TYPE REF TO iwci_salv_wd_table,
         lr_cmdl   TYPE REF TO cl_salv_wd_config_table,
         lr_col    TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
         elem_year TYPE REF TO if_wd_context_element,
         stru_year TYPE if_alv_layout=>element_importing,
         item_year LIKE stru_year-i_current_year,
         lf_string    TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
   EXPORTING
    name = 'IMPORT_NODE-PARAMETER'
   IMPORTING
    value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
    lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
    lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
    lr_column_header = lr_column->get_header( ).
    lr_column_header->set_text( lf_string ).
endif.

Change the SWF loading text for a single presentation

This question was posted in response to the following article: http://help.adobe.com/en_US/Presenter/7.0/WS8815BC0A-5D22-4f29-87B9-D9047B5B57E4.html

Hi,
I have Adobe Presenter 7.0.5, in which with recently updating to 7.0.7 version.
When I tried the fix of this "Change the SWF loading text for a single presentation" workaround fix, I passed to have the error:ReferenceError: Error #1069: Property ADOBE_PRESENTER not found on Pool_P75.Resource.UIText
But before this error comes, I see that the loading text is changes from the original 2Adobe Presenter" to the one defined by me on the UIText, as the fix said.
And what's happen is that the scrren with the loading text is not being changed by the learning first slide....
Is there any workaround to correct that error?
Many thanks in advance for any feedback from the adobe support team or from any other colleagues that are using Adobe Presenter (;-)).

How do I change the colour of text in a cell in a JTable?

I am trying to change the color of the text in a single cell in a JTable. I have tried not adding a cell renderer and it changes the colour of text in all cells.
I have tried adding a cell renderer to the table and it does the same ie all cells text colour changes.
I am able to add a cell renderer to a column and it changes all the cells in the column.
I cannot figure out how to change just one single cell's text colour without effecting the other cells.

Ok, so if i create my own cell renderer do I set it as the default renderer for the whole table i.e.
table.setDefaultRenderer(MyCellRenderer, renderer);
Does this set one cell renderer for the whole table or is there an individual one for each cell?

How to change the output as text format in Apps R12.1.3

Hi All,
Currently iam trying to modify the Java Concurrent Program (FDExtractAndFormatting) in Batch Payment Process. This Program is generated in text format in 11i APPS. Now we are upgrading to R12.1.3. In R12.1.3 output is coming as PDF format. Here my requirement is how to change the output as text format in R12.1.3 also.
Please do the needful and suggest me.
Regards,
Jagadeesh

1. It is seeded java concurrent program. Some attributes are missing from 11i to R12. In 11i it is a text format.So i have to investgate on how to retrive those attributes in R12. What is the concurrent program name?
Have you tried to change the output and submit the request?
2. Once all are attributes are coming in PDF format. Client wants to open same output in text format as it is 11i (In R12 it is generated in PDF format).If the above does not help, please log a SR.
Thanks,
Hussein

Adding logic to the hide/show

Hi Guys
I am pretty new at this so please excuse my ignorance. I have added hide/show regions into a cell of an advanced table. In the VO I also coded in the boolean decode.
So now when I run my page I get the the following: where there is details for the cell the cell is in Hide status, when the details are null its in show status.
The decode is as follows: decode(contact_details.contact_name,Null,'0','1'). The attribute is set to Boolean.
My issue is when I click on the hide/show link on the page it does not "work". ie: if I click on the show status it does not toggle to hide status and visa versa.
Am I meant to add logic to the controller?
Thanks

Is your page embedded in a workflow page or notification? If so, then you cann't have hide/show action rather any action on your page as per workflow standards. They require you to embed a region and not a page.
--Shiv

In a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to change the stsndard selection text for a LDB..

Hi All,
    I am using a LDB selection screen. I want to change the selection text of the standard selecetion field.
For ex, for LDB- PNP, i want to change the 'Personnel number' text to 'Employee ID'...
Please let me know how to do this.
Regards
Nanda

Hi Nanda,
Here is the code which is exactly suitable for this req.
TABLES: pernr.
data: i_tab type standard table of RSSELTEXTS with header line.
initialization.
i_tab-name = 'PNPPERNR'.
i_tab-kind = 'S'.
i_tab-text = 'Employee ID'.
append i_tab.
CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
EXPORTING
    program                           = 'ZESO_TEST'
tables
    seltexts                          = i_tab
EXCEPTIONS
PROGRAM_NOT_FOUND                 = 1
PROGRAM_CANNOT_BE_GENERATED       = 2
OTHERS                            = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Eswar

How do I change the color of text in Messages?

How do I change the color of text in Messages? It was easy to do before, but I can't seem to find it after the upgrade.. is it a hidden menu option? The gray text is really annoying.

Two possible ways are available
Set the text with and html text string like "<html><font color-red>" + text + "</font></html>"
or get the cellrenderer, cast to the DefaultCellRenderer and call setForeground or background or implement or your own cellrenderer to do the custom coloring (this could maybe depend on indexes)
ICE

How to change the colour of text property in Radio button?

Hello All,
I am having some radio buttons in my application. i want to change the colour of text property by default it is black.
Could any one please suggest me how to do it?
Thanks in advance.

Currently you cannot, it is a known (and hopefully reported, and at least addressed for next version) bug (or limitation, as they rushed to get the components out before JavaOne...).
People reported they just put an empty text and put a label beside the component. Ugly workaround (bad when the component will be complete) but if it works... :-)

How to change the field label text in standard WD application

Hello All,
I have a requirement to change the filed label text in standard WebDynpro application.
Application Name: /SAPSRM/WDC_UI_DO_BIDDER
View: V_DO_BIDDER_SEARCH_C
I want to change the label text from "Last Name" to "Vendor Name".
Can anyone please provide me the possible options to change label text?
Thanks in Advance.
Regards,
Shyam

Thread closed...Found the solution ...

Change the Hide/Show text in a OATable

Similar Messages

Maybe you are looking for