Change the nav item selected class name

Hi there,
In moduleTemplates > Menu > Default > container.html
The function call to set the selected nav menu iten does not have a parramater to set the class name :
// this will set the selected state
if ((null !== ulTagId) && ("" !== ulTagId)) {
catSetSelectedCSSItem(ulTagId);
So you can not pass a parramater to set the dynamicly generated class name of the "selected" li
So is the any other way to have the selected class name be "iAmSelected" for example.
I dont yet see any way to edit the system file where the function resides : CatalystScripts/Java_DynMenusSelectedCSS.js
Kind regards
Gary

Hi Gary,
When using
http://forums.adobe.com/docs/DOC-1903
You can delete it and add your own script.
OR the easier thing is adapt your CSS to match the class.

Similar Messages

How to change the $ sign in a class name?

How to change the $ sign in a class name?
After compilation I get classes with names like abc.class, abc$1.clsss abc$2.class etc.. How do I get different names (without the $ sign) that will be accepted by my web host.

Thank you, I found out it had to do with the actionPerformed(ActionEvent e) assignment,
public void actionPerformed(ActionEvent e) {
if (e.getActionCommand().equals("Subtotal")) {
bla bla �..
I will have to rewrite some of my source code. I gave you points, thank you again.

Doesn't allow us to change the commitment item in ME21N/ME22N

Hi,
We have prepared Po for Stock transfer Order by using Item Category I, without PR. While making Po we have two line items... 1st line item the material is DMFRL1023 (Raw Material) & 2nd line item is DMFRC1051 (Raw Material). In Material DMFRL1023 itu2019s allowing to change the Commitment Item but in 2nd line item it doesnu2019t allow to change the commitment item. The Valuation Class & VC: Sales order stk in both materials is same. The Gl which is attached in BSX transaction key in obyc is XXXXXX. And the same GL appears when we do the entry in new po against two materials because we have created Commitment item same no as GL which is non budgetable. But in Material DMFRL1023 it give us to change & for Material DMFRC1051 it doesnu2019t allow us to change the commitment item. If we changed that it will take previous commitment item (Default one). There is no purchase Order history against both line item
Kindly advice.
Thanks in advance
Regards,
Nikhil

Hi Nikhil,
The way that commitment items are derived by transaction FMDERIVE can be the answer for your inquiry.
I will explain to you in detail how to use the trace tool.
Normally the derivation strategies are called at posting time several times. Please turn the trace of FMDERIVE On, as explained in SAP note 666322 (download the note in service marketplace). If you enter in transaction FMDERIVE you will see the trace button (a truck) were you click on activate.
This is a customer tool where you can analyze the derivation log and find out how the Account Assignment objects are determined (values after and before the derivation process).
Please do the following:
a. Enter in FMDERIVE and activate the Trace
b. Test again your issue in ME21N/ME22N.
c. You will receive FMDERIVE trace screen with the values of account assignments. Probably you will receive more than one time this screen. If you see that the value is correct go to the next step clicking on button "X".
Whenever you find that the value is incorrect (or empty), please do the following:
d. In the FMDERIVE pop-up screen click on button "Display Log". When you click there you will see another screen.
e. There, Go to Menu Goto -> Display Print Template
f. Click on both folders to open the tree.
In the first one you will see the Values after and Before.
In the second one (Steps), you are able to see WHERE exactly was the change, what was happening during the execution of derivation rules, the RULES that it is in use in that step.
All the derivation rules which are in use during the process will be marked with yellow line.
If you check the trace log and the 'value after' is not correct, you should adjust your existing derivation rule.
If you find out that a derivation rule is responsible for the different behaviour on commitment item changes in MM transactions, I suggest you to find out the derivation rule and then adjust the target field settings.
For this, please enter in the derivation rule -> Definition Tab, double click in the name of your Target Field (bottom part of the screen).
There you will find the fields:
( ) Do not overwrite if Fld Already Filled
( ) Overwrite with new value
( ) Overwrite with new value if new value is not empty.
You should choose the most appropriate option for your business scenario.
I hope this helps.
Best Regards,
Vanessa.

How to change the value of Valuation class.

dear friends:
i want to change the value of Valuation class in the material master .but system warning info occurs .
The valuation class cannot be changed
Message no. M3 368
Diagnosis
You wanted to change the valuation class. However, this is not possible because one or more of the following already exist for the material:
Valuated stocks in the current period or in the previous period
Open purchase orders or delivery schedule lines
Production orders for which a goods movement has already taken place
System Response
Your change is reset by the system.
Procedure
If valuated stocks already exist, you can change the valuation class only as follows:
a) Post the stocks of the material to an interim account.
b) Change the valuation class in the material master record.
c) Post the stocks of the material back to their original account.
If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to Deleted.
Procedure for System Administration
In Customizing for the Material Master, you can switch the check for open purchase orders and/or for production orders to a warning. You do this in Define Attributes of System Messages by assigning the message type Warning to message MM 326 and/or MM 327 respectively. However, first ensure organizationally that further processing of the open purchase orders or production orders cannot result in inconsistencies.

To resolve SAP error message M3 368 I would suggest that you refer to SAP note number 1967543. This note outlines the issue and a resolution to it:
Please have a look at the description of the error M3 368. This error may occur if one or more of the following already exist for the material:
1. Valuated stocks in the current period or in the previous period
2. Open purchase orders or delivery schedule lines
3. Production orders for which a goods movement has already taken place
Resolution:
If you have valuated stocks in the current period or in the previous period, you will get message "Stocks already exist.". You have to clear all the stocks both in current period and previous period. Please have a look at SAP Note 30656, it shows an example on how to clear the stocks in
previous period. You can use transaction MIGO to execute this step.
If you have open purchase orders or delivery schedule lines, you will get message "Purchase orders already exist.". You can find related purchase orders after you click 'Display Error' button. Please delete them in transaction ME22N.
If you have production orders for which a goods movement has already taken place, you will get message "Production orders already exist.". Please archive these production orders. You need to set deletion flag for these orders firstly and go to SARA, use archiving object PP_ORDER to archive
these orders.
Kind regards,
James

HT204161 I bought an IMac 27 on craigslist and I need to change the Apple registration to my name. How can I do it?

I bought an IMac 27 on craigslist and I need to change the Apple registration to my name. How can I do it?

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

How to change the particular item size via script?

Hello,
I need to change the particular item(pathitem,grapitem) size(width and height) in the illustrator cs3 file through script. Is it possible kindly advice me.
Thanks for looking into this...

I changed the widh and height of the selected items. While converting stroke weight of the selected item also changed. But i need to change the width and height of the selected items without any modification in the stroke weight(scale strokes and effects). Could you please advice me the possiblilities and solution via scripting.
Thanks for looking into this..

How to change the default password file's name and path when the database created?

how to change the default password file's name and path when the database created?
null

Usage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character.

How do I change the way that my company name appears when googled?

How do I change the way that my company name appears when it is googled? Currently it only shows up as part of my company name followed by the website listed below and then the start of a description. I would like to make it so my entire company name show up as the title when searched. I used iWeb to create the site. Please Help! Thanks:)

Put the whole company name in the title tag...
http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html

How to change the line item storage location during the sales order creatio

How to change the line item storage location during the sales order creatio

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

How do I change the default '/' shortcut (select none in colour swatch) to something different? Where can i find it in Keyboard Shortcuts?

How do I change the default '/' shortcut (select 'none' in colour swatch) to something different? Where can i find it in Keyboard Shortcuts?
Any ideas?

Thanks so much )))))))

Can I change the nav menu text color?

Can I change the nav menu text color? ( it's too dark for the dark background I like.)

I have this exact same question and you have no reply and I'm wondering what the answer is.

Change the default 'Item not found' Page

Anyone know how to change the standard 'Item not found' in KM? I would like to change it to something a bit less technical. I am assuming that it is stored in the repository somewhere.. but where?

No,
it's currently not possible to change that page.
Best regards, Julian

Change the Parameter as Select option

Hi Guy's,
Please help me friends, present requirement is like this : change the Parameter into Select-Option.
Here they are using one function module, this function module import parameter taking single value, how loop this function module with in this select-option.
PARAMETERS p_fictr LIKE fmfctr-fictr.
START-OF-SELECTION.
Move the select options to internal tables (import parameter for fn)
move_sel_option : sel_buk   s_bukrs ,
                     sel_pern s_pernr ,
                     sreinr    s_reinr ,
                     spdatv    s_pdatv ,
                     sberei    s_berei .
Call the function to get all trips corresponding to sel criteria
CALL FUNCTION 'ZHR_GET_FUND_TRIPS'
    EXPORTING
      p_fictr = p_fictr
      p_sub   = p_sub
    TABLES
      s_bukrs = s_bukrs
      s_pernr = s_pernr
      s_reinr = s_reinr
      s_pdatv = s_pdatv
      s_berei = s_berei
      i_trip = i_trip
    EXCEPTIONS
      OTHERS = 1.
Thanks and Regards,
Sai

hi,
You can first the field values using the select statement and then loop that internal table and pass the values to the function module.
try this
*PARAMETERS p_fictr LIKE fmfctr-fictr.
select-options: s_fictr for fmfctr-fictr.
START-OF-SELECTION.
Move the select options to internal tables (import parameter for fn)
move_sel_option : sel_buk s_bukrs ,
sel_pern s_pernr ,
sreinr s_reinr ,
spdatv s_pdatv ,
sberei s_berei .
select fictr
   from fmfctr
   into tabel itab
where fictr in s_fictr.
loop at itab.
Call the function to get all trips corresponding to sel criteria
CALL FUNCTION 'ZHR_GET_FUND_TRIPS'
EXPORTING
*p_fictr = p_fictr
p_fictr = itab-fictr
p_sub = p_sub
TABLES
s_bukrs = s_bukrs
s_pernr = s_pernr
s_reinr = s_reinr
s_pdatv = s_pdatv
s_berei = s_berei
i_trip = i_trip
EXCEPTIONS
OTHERS = 1.
endloop.
regards,
Veeresh

[svn] 2932: Updated manifests with recent changes to TCAL package and class names.

Revision: 2932
Author: [email protected]
Date: 2008-08-20 14:01:37 -0700 (Wed, 20 Aug 2008)
Log Message:
Updated manifests with recent changes to TCAL package and class names.
Reviewer: Jason
Bugs: SDK-16531
QA: No
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16531
Modified Paths:
flex/sdk/trunk/frameworks/fxg-manifest.xml
flex/sdk/trunk/frameworks/mxml-2009-manifest.xml

Revision: 2932
Author: [email protected]
Date: 2008-08-20 14:01:37 -0700 (Wed, 20 Aug 2008)
Log Message:
Updated manifests with recent changes to TCAL package and class names.
Reviewer: Jason
Bugs: SDK-16531
QA: No
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16531
Modified Paths:
flex/sdk/trunk/frameworks/fxg-manifest.xml
flex/sdk/trunk/frameworks/mxml-2009-manifest.xml

How to change the committment item for GL acct in PO

Hello Gurus,
After the PO created, User wants to change the commitment item for GL acct 330118 temporarily from 330001 to 330000 due to budget constraint. However after budget has been topped up, we are unable to change back to the correct no. Even we have modified the Asset Master and GL masters also. But in PO we are not able to change the commitment item.
Kindly help to solve this issue.

>
Joseph Paulraj wrote:
> Hi Murthy,
> For Account Type A ( Asset) - GL account is set as optional entry in account assignment ,
> For Account Type K (Cost Center) - GL account is set as Mandatory entry. but for both types, we were not able to change the Commitment item.
> Kindly suggest me, what should i do.
Hi,
For both Account types A and K,change the Commitment item to Optional entry,then try.
Regards

Change the nav item selected class name

Similar Messages

Maybe you are looking for