Change the pipeline to the Integration Server - Link or Steps needed -URGNT

Hi,
        Can someone please let me know the set of steps or blog link to configure the
   " Maintain the pipeline to the Integration Server:
   Change the pipeline to the Integration Server by running transaction SXMB_ADM "
   which is to be done as part of the post installation steps for PI usage type in a Heterogeneous system migration.
Thanks
   Sourav

Sourav,
Go to SXMB_ADM --> Configuration --> Double click on Integration engine configuration --> Then in the corresponding integration server you should see this url. If you dont see then click on specific configuration --> Choose category as Runtime --> In parameters put IS_URL then in current value put the url.
Check this help for more information on this:
http://help.sap.com/saphelp_nw04/helpdata/en/89/b5553bf3a76258e10000000a114084/content.htm
Regards,
---Satish

Similar Messages

Cannot find the picked file in Integration Server

Hi,
I am facing an weird problem like
The file is being picked up by the File adapter(we have set the mode to Archive)and succesfully archived.But when i search the same file in IS(SXMB_MONI)the message is not there.
In RWB also i could not find the picked information
In Adapter monitoring(amtServlet)the file adapter looks good(green)without any error.
when i resend the same files Sometimes i could see the file is picked up and available in IS and sometimes not as i said above.
Does anybody have any idea ?
Thanks in advance.
RGds,
Vasanth.
Message was edited by: Vasanthakumar Balasubramani
Message was edited by: Vasanthakumar Balasubramani

Hi,
Mario Müller : I have already checked that link
and the link which you gave is the same as that of what i have checked: http://host:por/mdt/amtServlet
>>In Adapter monitoring(amtServlet)the file adapter looks good(green)without any error.
Any other ideas ???
Shabarish,
I looked into that link it says about trace level i do not think so that might help me.
Have you got some other idea ?
RGds,
Vasanth.
Message was edited by: Vasanthakumar Balasubramani

What's after E90? Anything in the pipeline for the...

Hi again. Thanks for the comments / inputs on my previous thread.
I'm still really hoping that nokia would come with something similar to the 9500. I would really like to have a slightly lighter 9500, with a better camera, and BIGGER internal memory, faster processor. Any new things on the E90 is also welcomed (expect for that barcode scanner, which until now i have not found any use for it)
BUT, DO NOT take away any function which is already available on the 9500. Agreed?? hehehe
Maybe a 9500i? or E90i? call it whatever u want, but i seriously hope that Nokia would come with something that none of the old communicator users would object.
Anything guys?
TO NOKIA : Maybe some feedback or comments on why you've decided not to include fax, message sending schedule, contact card? Are these things really of no importance anymore?
(never got any feedback from Nokia until now)

faxes are old fashioned yes and yes the telex is a museum piece but just like the pen and paper and the incandescent light bulb the fax still has a practical use. I find myself in ocasions where I am on the road when certain documents arrive in my office that need immediate attention, ei estimates for repair or invoices, deliveries that need to be scrutinised or even a hanwritten note that was left by a visitor. In those instances i need the fax so i can view the document while on the road.
9110,9210,i,9500,9300,i,E90 I still miss my 9300i , E71, E72 But......

How to change the ROLE: Integration server in business system in SLD

Hi,
I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
In SLD, business system, 'integration' tab there is button "Associate with XI'.
I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
When I press the button "Associate with XI" and Save nothing happened.
How do i change my integration server.
Please help.
Regards,
Rehan

Hi Gaurav,
I have checked the teachnical system and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
I realised that both the business systems has been defined with role: integration server.
IN one business system i can see that there is "associate with XI" button.
But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
Can you please let me know the procedure to chnage the technical system with respect to integration engine???
PLease help as our project is held up due to this.
regards,
Rehan

I want to count the elements in the pipeline and also process them

The following script works, but only because I save the pipeline contents in a variable. I would like to not have to save it - see below. The commented section is my most recent failure. (And BTW I know the script has nothing to do with ZIP: that's
the next step.
function ZipUpModified {
    param ([string] $from, [string]$to, [datetime]$cutOff)
    try
        Write-Host ("Copying {0} modified on or after {1} to {2} in execution at {3}" -f $from, $cutOff.toString(), $to, $(Get-Date))
        if (-not (Test-Path -Path $from)) {Throw "Source folder $from does not exist"}
        if (Test-Path -Path $to) {Throw "Target folder $to already exists"}
# I would like to substitute the next 5 lines for the following 4; but I cannot seem to get the pipeline to reach the Copy_Item
#       $fileCount=0
#        Get-ChildItem $from -Recurse |
#            Where-Object {(New-TimeSpan -Start $_.LastWriteTime -End $cutoff).TotalHours -le 0} |
#            ForEach-Object {Copy-Item -Destination {Join-Path $to $_.FullName.Substring($from.length)}; $fileCount++; }
#        Write-Host ("Copied {0} files/folders successfully at {1}" -f $fileCount, $(Get-Date))
        $filelist=Get-ChildItem $from -Recurse |
            Where-Object {(New-TimeSpan -Start $_.LastWriteTime -End $cutoff).TotalHours -le 0}
        $filelist | Copy-Item -Destination {Join-Path $to $_.FullName.Substring($from.length)}
        Write-Host ("Copied {0} files/folders successfully at {1}" -f $filelist.count, $(Get-Date))
    catch
        Write-Host $($_.Exception.ToString() -replace ".*: ")
        Write-Host "so we are stopping..."
    finally
        $IgnoreThis = Read-Host "hit OK or Enter"
### Main
$cutOff= (Read-Host 'Enter date of most recent backup (mm/dd/yyyy):') | Get-Date
ZipUpModified "C:\Users\Jonathan\Desktop\Test_BU\SRC" "C:\Users\Jonathan\Desktop\Test_BU\TGT" $cutOff
## two more calls to ZipUpModified

Guys - Thanks for the quick response
Bill - I think you are recommending the approach I had in the submitted code.
David - the whole point is that I want to use the pipeline, not the Path argument, and I had no luck with your suggestion, which I took as:
        Get-ChildItem $from -Recurse |
            Where-Object {(New-TimeSpan -Start $_.LastWriteTime -End $cutoff).TotalHours -le 0} |
            ForEach-Object {Copy-Item -Path $_ -Destination {Join-Path $to $_.FullName.Substring($from.length)}; $fileCount++}
However, all this did make me go read more documentation, and there is a -PassThru argument to Copy-Item which creates pipeline output after the copy. Specifically:
        $fileCount=0
        Get-ChildItem $from -Recurse |
            Where-Object {(New-TimeSpan -Start $_.LastWriteTime -End $cutoff).TotalHours -le 0} |
            Copy-Item -Destination {Join-Path $to $_.FullName.Substring($from.length)} -PassThru |
            ForEach-Object {$fileCount++}
        Write-Host ("Copied {0} files/folders successfully at {1}" -f $fileCount, $(Get-Date))
Thanks again
JonW
JonW

Integration server as logical system in IDoc to file scenario

Hi,
Will we configure integration server as logical system in IDoc to file scenario or the RFC destination related to the port will be suffice?
For which logical system will the outbound partner profile configured?
Regards,
Gajendra.

Hello,
I feel that the RFC destination linked to the port is the key here.
Because the scenario (IDoc to File) works in both the cases:
Case 1: Used the logical system as Integration server
Case 2: Used the logical system related to the file (third party) in the SLD.
In both the above cases the RFC destination points to the integration server.
Is this the case that in the XI scenarios (where IDoc are sent) the logical system name in the partner profile is just dummy and has not much significance??
It is the port that matters and once the Idoc reaches XI the routing takes place based on the configuration in ID.
Thanks.
Regards,
Gajendra.

No service user name found for Integration Server

Hi All,
Our XI is in production..once in a while (once in every 3 weeks) messages get fail saying: No service user name found for Integration Server. When we re-start J2EE engine, messages get processed fine. Does anyone know the reason for the above error?
<SAP:AdditionalText>3:No service user name found for Integration Server is.00.******<S/AP:AdditionalText>
<SAP:Stack>Error when reading the access data(URL, user, password)
Thanks
Indrasena

Hi,
did you configure your adapters like IDoc, RFC based on the SAP service user created in the SAP system ? i,e RFC destination etc..
did you check pipeline url is correct in the SLD>Business System><Integration Server> and check the url. It should have http port.
Also check this thread-
sRFC-adapter and file adapter with error: no adapter found
Regards,
moorthy

Integration Server configuration error

Hi all,
I have an issue with the XI Integration server configuration.
When I have tested the configuration I have detected that there is an error in the Integration server (transaction SXMB_ADM)
The value was:
http://xxx:xxxx:/sap_xi/engine?type=entry
instead of
http://xxx:xxxx/sap_xi/engine?type=entry
note that the fisrt value have : after the port number.
I have tested the SLD Bussines System configuration and had the same issue, I have solved too.
But when I execute the test for integration server in transaction SXMB_ADM i have the next message:
Corresponding Integration Server: Current Configuration <> System Landscape
For the SLD Role of Bussines System the value in this test is the old value, not the new.
Could somebody tell me if i forget something?
Thanks in advance,
RP

HI,
This is somthing related to Cache . Try to refresh Cache.
see below links regarding cache
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
Regards
Chilla

Integration Server URL for HTTPS

I want to configure SSL for our PI 7.0 system. I have:
- Configured SSL on the Java Stack and tested it. It works fine.
- Configured SSL on the ABAP and tested it. It works.
I know to enable HTTPS I need to change the following exchange profile parameter:
com.sap.aii.connect.secure_connections = messaging
I think I need to change the J2EE server
SAP XI AF CPA Cache to register with the http/https ports and the Fully qualified domain name (so to match the SSL Certificate).
The big question is:
Do I need to change the URL for the Integration Server (in the business system in the SLD)? For example:
https://<hostname>.domain.com/sap/xi/engine?type=entry
(where https is the default 443 so I don't have to specify the port).
Or can we just leave that as the default HTTP connection as below?:
http://<hostname>.domain.com/sap/xi/engine?type=entry
Any help is greatly appreciated since I don't have access to a sandbox and it is trial and error (with developers needing to use the system). Thanks!

I agree with Silvia here.
The entry can continue to point to the default port / default URL of the Integration Server as you would need to authenticate only the end point and not internal XI calls.
Also, if I remember correct, the SSL port is always one port higher than the default port both for J2EE and ABAP stack.
@Silvia : Nice to see ppl from SAP (especially the author of CTS+ article ) contributing on the XI forums. Need more people like you here
Regards
Bhavesh

[XI] Missing related integration server in SLD

Hi Experts.
I'm very new in SAP Netweaver and it's components. Now I study XI and I would like to config some simple scenarios (FILE-XI-FILE etc). My colleague have installed XI on our machine and everything set up as well. I started with SLD in order to configure Technical systems and Bussiness systems. At first, I configured Technical system as Third-Party system and then I start to configure Bussiness system. I used Third-Party system as well and when I was on the last step of the Business system wizard. The Business System role was preddefined (Application System) and unabled to change. I wanted to choose from the List of Related Integration Servers, but there is nothing in the list. Now I'm helpless and I don't know how to get the name of the integration server to the list. Could anyone help me with my issue? Any help would be welcome. Thanks

Hi
Thank you for your help. Your posts were helpful, but it didn't solve my problem yet. Look at that scenario: <a href="/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i:///people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i. I have exactly followed that scenario and in the step 6 I wanted to choose related integration server (in that scenario it's SXI) but I have an empty list of my related integration servers. In SLD I tried in Administration->Content Maintenance->(subset)Landscape Description->(class)XI Domain and I found out that there are XI Contained Adapter and XI Contained Integration Server associated with it. So is there needed some configuration in Content maintenance in order to solve my problem. Probably my question isn't very well described, but I'm sorry because I don't have any experience with XI and I just started with it. So my question again: How will I get the name of my integration server to be in that list (like in that scenario in step 6 ...)?

Integration server information isn't updated

Hi
In SLD ->Technical System ->Process Integration,
the update date of Integration Server have not been updated otherwise restart SAP instance.
regards,

Hi
Try with this
Call transaction SXMB_ADM--> Integration Engine Configuration and
check if the role of the business system is Integration Server.
Press the Check (F7) button to check if the configuration is consistent
with the SLD.
There must be a WebAS ABAP business system in SLD for the XI system with the role Integration Server and not Application Server. If it is with role as Application Server, then change it to Integration Server. Now when u create any new BS for other systems, mark their role as Application Server and provide XI BS name as the Related Integration Server name

Host Integration Server 2013 Cumulative Update 2 (CU2) is available

This cumulative update package for Microsoft Host Integration Server 2013 contains hotfixes for issues that were fixed after the release of Host Integration Server 2013.
Important This cumulative update package includes all the component packages. However, the cumulative update package updates only those features that are currently installed on the system.
Download Link :
http://support.microsoft.com/kb/2929767
Many Thanks to the Product and Support TEAM ! You’ve done a great job !
Steve Melan - BCEE My Blog : http://stevemelan.wordpress.com

Hello Jason,
In your case I recommend you to use the Standard License as you are only using Host Integration Server 2013.
Then you will need for your architecture to license 16 Cores.
1 Core BizTalk 2013 License costs : about $2500
Total : 40.000€
As HIS 2013 is very performant, you can also use for instance only 1 CPU with 4 or 6 Core with higher Frequency per Server.
Here's a good article explaining the licensing model of BizTalk 2013 : http://blogs.biztalk360.com/understand-biztalk-server-2013-licensing/
Q: What license limitation should I consider with the BizTalk branch edition?
A: You may Run Instances of the software on Licensed Servers only at the endpoint of your internal network (or edge of your organization) to connect
business events or transactions with activities processed at that endpoint; provided, the Licensed Server may not:
 act as
the central node in a “hub and spoke” networking model,
 centralize enterprise-wide
communications with other servers or devices; or
 automate business processes
across divisions, business units, or branch offices.
You may not use the server software, including the Master Secret Server, on a server that is part of a networked cluster or in an operating system environment
that is part of a networked cluster of OSEs on the same server.
Best Regards,
Steve Melan - BCEE My Blog : http://stevemelan.wordpress.com

No destination for Integration Server found - XI 2.0

Hello,
I have developed a few java proxies and have had good luck using the jpf.properties file. Now, as we would like to set up more of a production scenario we are in need of moving over to the dbconnect.properties and technicalID.properties. The problem is when switching over to these files I received the "No destination for Integration Server found" error. So first off I would like to make sure we have the files configured correctly.
dbconnect.properties
hostname=xipsys
systemNumber=03
user=xiusr
password=xipswd
client=300
language=EN
... the dbconnect.properties file is correct I believe.
technicalID.properties
SAPTechnicalSystemIdentification=TS_MyTechnicalSystemName.SystemHome.MyPCName
... the TS_MyTechnicalSystemName is the technical system that I created in the SLD. MyPCName is my computer name as this is where I'm running the java proxies from.
First off, does it look like my files are configured properly?
Second, in the SLD I've configured my technical system and also a business system with similar names and specified the host as MyPCName. Is this correct?
I've also noticed that when I remove the files completely from my system I get the exact same error message however they are in the right location and have the correct names. Is there anyway to get a better error message out of the system? I know the files are in the right location cause if I use the jpf.properties in that location it works.
thx
XI 2.0

Well it's getting a lot closer. I'm getting a different error now and its showing up in tx SXMB_MONI. The error I get is...
ROUTING.NO_SENDER:Unable to find a sender
In the monitor it shows that there was a message pushed but it's red flagged and there is no sender/receiver information. Is there anything else I need to add to the java proxies?
The following is my latest configuration ....
dbconnect.properties looks like
hostname=myXIServer
systemNumber=03
user=XILDUSER
password=password
client=300
language=EN
technicalID.properties
SAPTechnicalSystemIdentification=TS_myTechSys.SystemHome.BS_myBizSys
In the SLD I have TS_myTechSys defined as a "SAP Standalone Java System" on myComputer.mydomain.com.
Also in the SLD, I have defined BS_myBizSys as a "Java System" and belongs to the TS_myTechSys Technical System.
In the exChange Profile under ApplicationSystem I have the following defined
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name
com.sap.aii.applicationsystem.serviceuser.pwd
com.sap.aii.proxy.framework.connection.timeoutInMSec
com.sap.aii.proxy.framework.destination
com.sap.aii.proxy.framework.destination.client
In addition I also get the following error sometimes...
JPF loadProfileProperties() - Could not access Exchange Profile: java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer '
com.sap.mw.jco.rfc.MiddlewareRFC'
no sapjcorfc in java.library.path
I have this file as a dll in the same directory as all the jar's.
in addition XILDUSER is part of the following group
SAP_BC_AI_LANDSCAPE_DB_RFC
Should that user have more permission?
Any ideas?
XI 2.0
One more note, I am running my WebApp from an instance of Tomcat 4.1. This is where the Java Proxies are running and it works fine using the jpf.properties. Some of the documentation I've recently found has said that it needs to be running on a SAP J2EE engine which we will not be able to do in the end.
Message was edited by: Larry Chaput
Message was edited by: Larry Chaput

Business System of type Integration Server In SLD .

Hi
Can anybody tell what is the criteria on which we decide whether a business system to be created in the sld should be of type Integration Server or Application System .
And also can we have only one Business system of the type integration server in the sld ?
Can anyone please explain the concept behind this.
Thanks
Nilesh.
Edited by: Nilesh Taunk on Jun 19, 2008 7:24 AM

hi,
steps to create a business system
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
If there is no business system for integration server, that means the post installation steps are not completed or someone messed with the business system for integration server.
To define a business system, follow post installation steps from install guide.
http://service.sap.com/instguides
SAP NetWeaver -> Release 04 -> Installation -> SAP XI -> Installation Guide - SAP Exchange Infrastructure 3.0 SR1 follow page 38
If you do not have integration server, that means your XI will not work.
Thanks,
Vijaya

Monitoring status of OID Integration Server

Does anyone know anything about the best practices of monitoring the status of OID integration server. I'm writing a small plugin for Nagios and I was hoping to be able to pull a single attribute out of LDAP that tells me the status of Integration server. We have it running against iPlanet, and we need to make sure it's always in sync (and when it's not, notification is sent.)
Is this what the attribute orclodipinstancestatus does? Anyone have any info on the possible values of this (I presume 1 means everything is OK, although this may be the wrong attribute.)
I could just look at the odi/log/AGENTNAME.trc file, but if OID Manager can see the status (sync success or failure) I'm pretty sure it's some value in ldap... somewhere...

I'll answer my own question... I believe this should do the trick.
Using ldapsearch:
ldapsearch -h localhost -D "<SOME ADMIN USER>" -w <PASSWORD> -b "orclodipagentname=<AGENT NAME>, cn=subscriber profile,cn=changelog subscriber,cn=oracle internet directory" -s sub "objectclass=*"
A nice text attribute:
orclodipsynchronizationstatus=Synchronization Successful
reveals the status.

Change the pipeline to the Integration Server - Link or Steps needed -URGNT

Similar Messages

Maybe you are looking for