Change The title of table control

I have Table Control on Screen 102 called TABCTRL_102.
General attributes of TABCTRL_102 has
<b>With title</b> checked and
<b>Title element name</b>  TXT003
Now I want to Change The title of my table control through program. Is there a way out.

Hi Flora,
Declare a global variable in your TOP Include like,
DATA: gv_text_tc_102(30).
Then replace TXT003 in screen painter with GV_TEXT_TC_102
and mark it as 'Output Only'.
Then you can fill this variable in one of the PBO Modules of the screen 102 like,
MODULE <your PBO Module Name>.
***Other Code
gv_text_tc_102 = 'My Text'. "Better use a text symbol
ENDMODULE.
Hope this helps..
Sri
Message was edited by: Srikanth Pinnamaneni

Similar Messages

  • How can I change the size of table control in table maintenance re-gen?

    Hello Experts,
    I hv created a maintenance view and after generated table maintenance view for it.
    now it adjusts the size of table control in table maintenance generation.
    I want to change the size (width) of table control and again re-generate the table maintenance.
    But when re-generation occurs, table control size is set to initial.
    why it is happening? and wt to do to solve this issue? any user exit?
    I need the changed size of table control even if its re-generated.
    Regards,
    R.Hanks

    Hello Ronny,
    Goto SM30, Enter your table name for which you have maintained your table maintainence generator .
    When the maintainence screen appears for your table name , Goto System->Status->Screen Program name.
    Copy that program name from there.
    Open that module program through SE80,this is the program name of your SM30 screen which appears when we enter our table name in SM30 transaction.
    In SE80,click the layout of the module program name you have entered there.
    Its layout will display you the table control(of SM30) present to enter your your enteries.
    In the change mode you can change its size , savee it and activate that program.
    Now goto to SM30 again and enter your table name, it will show you the changed size of the table control used to take the enteries.
    Note:This changed size is only for your table name and it will remain of its previous size for other table enteries.
    Hope it helps you.
    Thanks Mansi

  • Can we change the attributes of table control wizard once it is created?

    hi,
    i hav created table control using wizard......now i hav to change attributes of that table control.......how to do it ?
    can anyone help me in this...............

    HI,
    Double click on the screen Number in whcih Table control is placed.
    Then Select the ELEMENT List Tab->place the cursor on the Table control and select the Atributes button in the Application toolbar.

  • How can i change the color of table control'  lines?

    Such as the subject. Thanks in advance!

    Hi,
    Please check,
    TABLE CONTROL LINES COLOR CHANGE
    color rows in table control
    Regards,
    Hema.
    Reward points if it is useful.

  • Dynamically changing the value in table control

    Hello Every one,
    In MD61 transaction table control am trying to change value dynamicaly i.e am trying to change value in table control automaticaly tht value to be captured and i need to show in status bar...
    Ex table control field is number: am giving 10,20,30 tht should show in status bar by adding if u enter 10 at status bar it show 10 then when u enter 20 it should add with 10 and give 30 ..
    in this way when ever u enter value in filed it should add with the status bar value.

    Hi!
    For conversion you can use the function module
    data :   w_amt         TYPE cms_dte_original_amt,
                                                                                    " Amount
                w_conv_amt    TYPE cms_dte_conv_amt,
                                                                                    " Converted amount
                w_kmein       TYPE cms_dte_original_curr,
       CALL FUNCTION 'CMS_API_CURR_CONV'
            EXPORTING
              i_original_curr = w_kmein
              i_original_amt  = w_amt
              i_result_curr   = 'INR'
              i_rate_type     = 'M'
              i_conv_date     = sy-datum
            IMPORTING
              e_conv_amt      = w_conv_amt.
    now accordingly you can move the currency and amount that is changed....
    here as you were saying that on f4 after selecting you want the other field to get the value on that currency.....
    this work can be done as here....
    in this the next field gets populated as the first field gets the value......
    refer to it.....
    https://wiki.sdn.sap.com/wiki/display/ABAP/GettingainputfieldpopulatedonenteringthevalueinoneInputfield
    Regards.

  • How to change the title of a block/form/table in the WebIC CRM 2007 ?

    Hi,
    We want to change the title of a block in the work area for example from 'Account details' to 'Partner details'.
    After investigation we think that we have to change the text in SOTR_EDIT transaction by editing the Alias or defining a new one with the desired title.
    The problem is that when we search for the alias in the OTR maintain initial screen , we get a list and we don't know which one is the alias associated to the title of our view..
    Is it the right way to proceed or is there any other solution ?
    Your help is highly appreciated.
    Regards
    Nabil.

    Hi Nabil,
    Its so simple,
    Go to the Component/ View : BP_HEAD/BPHEADOverview
    Click on the CONFIGURATION tab.
    Alt+Click on the BP_HEAD : AccountViewSet : Account Details
    Juss Change the Title Account Details to Partner Details.
    That's it. Your block title is changed now from Account Details to Partner Details.
    Best Regards,
    Shiven

  • How to change the title of an object in the build order window?

    In Keynote '09 v5.1.1 (1034)... How to change the title of an object in the build order window from the default "dropped image" to a specific title?
    I'm running the following:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro2,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.33 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 4 MB
      Memory: 2 GB
      Bus Speed: 667 MHz
      Boot ROM Version: MBP21.00A5.B08
      SMC Version (system): 1.14f5

    Custom names can't be applied to objects in the build list.
    They are labeled as either; text, shape, table, chart or the filename of an image

  • How do i change the title to my photo album:(ios7)

    How do I change the name of the title for one of  my photo albums in ios 7

    When you set the podcast up in WordPress you must have entered a title; it's presumably there that you can change it, and then re-publish it, though I can't advise on WordPress.
    One caveat, though: some podcast creation services derive the feed URL from the title: I don't know whether WordPress is one of them, but if it is you shouldn't change the title because if you change your feed URL withouth redirecting iTunes to a new feed in the proper manner you will lose control of your podcast.
    The method of changing iTunes to a new feeed URL requires the old feed to be left in place with a special tag added to it (I don't know whether this is possible in Wordpress) - the method is detailed here:
    http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
    However if the feed URL is not affected by changing the title then you can just go ahead and change it.

  • Change the title of the new HTML page screen

    Hi,
    I would like to change the title displayed in the screen to create a new HTML file from "New HTML Document" to something like "New Page". Is there any properties file which I can edit to get this done? Or does it come from some java class file?
    Awaiting reply.
    Thanks & Regards
    Ranjith

    Hi,
    I have found the text here:
    <i>\usr\sap\EED\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.km.cm.ui\lib\km.appl.ui.edit_api.jar\com\sapportals\wcm\control\edit\ResourceEditControl.properties</i>
    and here:
    <i>\usr\sap\EED\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.km.cm.ui\lib\km.appl.ui.edit_api.jar\com\sapportals\wcm\control\edit\ResourceEditControl_en.properties</i>
    So seems you could change it. But I think when you apply a patch to the KM the .properties files will be overwritten - so you will have to do it again...
    Romano

  • Hi All,What is the concept of table control in bdc

    Hi All,What is the concept of table control in bdc .Can u please explain in brief.How we have to handle the logic for va01 transaction .
    Thanks&regards.
    Bharat

    Hi Kaushik Datta ,
                              I already know for me51 ,but i am getting the problem for va01 while populating the item details in to the table control. The code which i have generated is :
    please see the code and tell me where i should increment  the counter for populating the item details
    report ZBKVA01Y
           no standard page heading line-size 255.
    include bdcrecx1.
    parameters: dataset(132) lower case.
       DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
      If it is nessesary to change the data section use the rules:
      1.) Each definition of a field exists of two lines
      2.) The first line shows exactly the comment
          '* data element: ' followed with the data element
          which describes the field.
          If you don't have a data element use the
          comment without a data element name
      3.) The second line shows the fieldname of the
          structure, the fieldname must consist of
          a fieldname and optional the character '_' and
          three numbers and the field length in brackets
      4.) Each field must be type C.
    DATA: BEGIN OF IT_DUMMY OCCURS 0,
          TEXT(1000),
          END OF IT_DUMMY.
    Generated data section with specific formatting - DO NOT CHANGE  ***
    data: begin of IT_HEADER OCCURS 0,
    data element: AUART
            AUART_001(004),
    data element: VKORG
            VKORG_002(004),
    data element: VTWEG
            VTWEG_003(002),
    data element: SPART
            SPART_004(002),
    data element: BSTKD
            BSTKD_005(035),
    data element: BSTDK
            BSTDK_006(010),
    data element: KUNAG
            KUNNR_007(010),
    data element: KUNWE
            KUNNR_008(010),
    data element: ABHOZ
            ABHOV_009(008),
    data element: ABHOZ
            ABHOB_010(008),
    data element: PRSDT
            PRSDT_011(010),
    END OF IT_HEADER.
    DATA: BEGIN OF IT_ITEM OCCURS 0,
    data element: MATNR
            MABNR_01_012(018),
    data element: KWMENG
            KWMENG_01_013(019),
          end of IT_ITEM.
    *DATA: DATE(10) TYPE C.
    *DATA: I_DATE TYPE SY-DATUM.
    *DATA: I_YEAR(4) TYPE C,
         I_MONTH(2) TYPE C,
         I_DAY(2) TYPE C .
    *DATA:
    End generated data section ***
    start-of-selection.
    CALL FUNCTION 'UPLOAD'
    EXPORTING
      CODEPAGE                      = ' '
      FILENAME                      = ' '
      FILETYPE                      = ' '
      ITEM                          = ' '
      FILEMASK_MASK                 = ' '
      FILEMASK_TEXT                 = ' '
      FILETYPE_NO_CHANGE            = ' '
      FILEMASK_ALL                  = ' '
      FILETYPE_NO_SHOW              = ' '
      LINE_EXIT                     = ' '
      USER_FORM                     = ' '
      USER_PROG                     = ' '
      SILENT                        = 'S'
    IMPORTING
      FILESIZE                      =
      CANCEL                        =
      ACT_FILENAME                  =
      ACT_FILETYPE                  =
      TABLES
        DATA_TAB                      = IT_DUMMY
    EXCEPTIONS
      CONVERSION_ERROR              = 1
      INVALID_TABLE_WIDTH           = 2
      INVALID_TYPE                  = 3
      NO_BATCH                      = 4
      UNKNOWN_ERROR                 = 5
      GUI_REFUSE_FILETRANSFER       = 6
      OTHERS                        = 7
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *perform open_dataset using dataset.
    LOOP AT IT_DUMMY.
    IF IT_DUMMY-TEXT+0(1) = 'H'.
    IT_HEADER-AUART_001(004) = IT_DUMMY-TEXT+1(4).
    data element: VKORG
    IT_HEADER-VKORG_002(004) = IT_DUMMY-TEXT+5(4).
    data element: VTWEG
    IT_HEADER-VTWEG_003(002) = IT_DUMMY-TEXT+9(2).
    data element: SPART
    IT_HEADER-SPART_004(002) = IT_DUMMY-TEXT+11(2).
    data element: BSTKD
    IT_HEADER-BSTKD_005(035) = IT_DUMMY-TEXT+13(35).
    data element: BSTDK
    IT_HEADER-BSTDK_006(010) = IT_DUMMY-TEXT+48(8).
    data element: KUNAG
    IT_HEADER-KUNNR_007(010) = IT_DUMMY-TEXT+56(10).
    data element: KUNWE
    IT_HEADER-KUNNR_008(010) = IT_DUMMY-TEXT+66(10).
    data element: ABHOZ
    IT_HEADER-ABHOV_009(008) = IT_DUMMY-TEXT+76(6).
    data element: ABHOZ
    IT_HEADER-ABHOB_010(008) = IT_DUMMY-TEXT+82(6).
    data element: PRSDT
    IT_HEADER-PRSDT_011(010) = IT_DUMMY-TEXT+88(8).
    APPEND IT_HEADER.
    CLEAR  IT_HEADER.
    ELSEIF IT_DUMMY-TEXT+0(1) = 'I'.
    data element: MATNR
    IT_ITEM-MABNR_01_012(018) = IT_DUMMY-TEXT+1(18).
    data element: KWMENG
    IT_ITEM-KWMENG_01_013(019) = IT_DUMMY-TEXT+19(15).
    APPEND IT_ITEM.
    CLEAR  IT_ITEM.
    ENDIF.
    ENDLOOP.
    perform open_group.
    LOOP AT IT_HEADER.
    perform bdc_dynpro      using 'SAPMV45A' '0101'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAK-SPART'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBAK-AUART'
                                  IT_HEADER-AUART_001.
    perform bdc_field       using 'VBAK-VKORG'
                                  IT_HEADER-VKORG_002.
    perform bdc_field       using 'VBAK-VTWEG'
                                  IT_HEADER-VTWEG_003.
    perform bdc_field       using 'VBAK-SPART'
                                  IT_HEADER-SPART_004.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  IT_HEADER-BSTKD_005.
    perform bdc_field       using 'VBKD-BSTDK'
                                  IT_HEADER-BSTDK_006.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  IT_HEADER-KUNNR_007.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  IT_HEADER-KUNNR_008.
    perform bdc_dynpro      using 'SAPMSSY0' '0120'.
    perform bdc_field       using 'BDC_CURSOR'
                                  '04/05'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=CHOO'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'VBAK-ABHOV'
                                  IT_HEADER-ABHOV_009.
    perform bdc_field       using 'VBAK-ABHOB'
                                  IT_HEADER-ABHOB_010.
    perform bdc_field       using 'VBKD-PRSDT'
                                  IT_HEADER-PRSDT_011.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-KWMENG(01)'.
    perform bdc_field       using 'RV45A-MABNR(01)'
                                  IT_ITEM-MABNR_01_012.
    perform bdc_field       using 'RV45A-KWMENG(01)'
                                  IT_ITEM-KWMENG_01_013.
    perform bdc_transaction using 'VA01'.
    *enddo.
    ENDLOOP.
    perform close_group.
    *perform close_dataset using dataset.
    Thanks&regards.
    Bharat .

  • How to make editable the colums of table control in the PBO

    Hello Experts!
    I`m using the table control in dynpro, and i want to make editable some colums depending of some values.
    How can i do that?
    Thanks!

    Hi
    U need to change the screen attributes of colunm by statament LOOP AT SCREEN/ENDLOOP into the loop of table control in PBO:
    PROCESS PBO.
       LOOP AT ITAB ......
            MODULE LOOP_SCREEN_TC.
      ENDLOOP.
    MODULE LOOP_SCREEN_TC.
      IF ITAB-FIELD1 = .........
         LOOP AT SCREEN.
            IF SCREEN-NAME = 'ITAB-FIELD2'.
               SCREEN-INPUT = 0.
               MODIFY SCREEN.
            ENDIF.
        ENDLOOP.
      ENDIF.
    ENDMODULE.
    Max

  • How to change GUI title in Table maintenance generator?

    How to change GUI title in Table maintenance generator?
    Thanks
    Pankaj

    Hi,
    In table maintenance goto
    Environment>Modification>Maintenance screen
    Click on layout button
    Make editable form
    change the text property of column.
    save and activate it.
    check in sm30 headings.
    Pankaj

  • Working with a projector file. How can center it, not allow scaling and change the title bar?

    I've tried using:
    import flash.system.fscommand;
    fscommand("allowscale", "false");
    fscommand("showmenu", "false");
    fscommand("fullscreen", "false");
    on frame 1, but they don't seem to work.  I'm going to be putting this project on a CD and the client wants to make sure it will open centered on the user's screen, which has not been the case so far.  It seems to open at different spots on different computers.
    They also want the title bar changed from "Adobe Flash Player 10" to their own title.
    Thanks in advance for the help.

    hkunz219 wrote:
    You can use: stage.scaleMode = StageScaleMode.NO_SCALE; As for the title bar change, you can change the title bar string using Resource Hacker. But i am not sure if that is legal. You will find the strings under the strings table.
    What did you mean by, "You will find the strings under the strings table."?  Were you talking about Resource Hacker?

  • Reg:How to delete the column in table control also from database table.

    Hi Experts,
    Once again thank u all for giving the responses.
    one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
    With Regards,
    Saroja.P.

    Hi,
    If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
    "This portion of code inside the LOOP...ENDLOOP.
    IF sy-ucomm eq 'F_DELETE'.
       gt_itab2-check = mark.  " Store the MARK field status into your internal table's correspoding field 'check'
      MODIFY gt_itab INDEX tabcontrol-current_line.
    ENDIF.
    iF sy-ucomm eq 'DELETE1'.
      DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
    ENDIF.
    Now you can modify your database table using the MODIFY statement.
    MODIFY ZDB FROM TABLE gt_itab.

  • How to delete the row in table control with respect to one field in module pool programming?

    Hi,
    Can I know the way to delete the row in table control with respect to one field in module pool programming
    Regards
    Darshan MS

    HI,
    I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
    I have written this code,
    module USER_COMMAND_9000 input.
    DATA OK_CODE TYPE SY-UCOMM.
    OK_CODE = SY-UCOMM.
    CASE OK_CODE.
         WHEN 'DELETE'.
            LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
                APPEND LS_SOURCE TO LT_RESTORE.
                DELETE TABLE LT_SOURCE FROM LS_SOURCE.
                SOURCE-LINES = SOURCE-LINES - 1.
            ENDLOOP.
    But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
    So I thought of doing with respect to the field.

Maybe you are looking for