Change to Conversion figures in PIR - ME13

Hi all
Is it possible to change the conversion figures that appear in the PIR - ME13, and how can we do this
We have an issue where the MMR is correct, but the PIR isn't. This may be due to the first Pur Ord being incorrect
However each new PO is now incorrect because of the PIR
We can see the correct data in the EINE table by plant, with the incorrect data with it (and the PO number beside it)
We believe the "update PIR field" in the PO me21n will not update this bad data
Any help would be appreciated
many thanks

Hi,
In ME11 ,you can maintain conversion factor as follows.
Example -50KG=1BAG ,Your base Unit is BAG in Material Master.
then under Purchasing Org Data1.
You need to maintain Order Unit as KG.
And then conversion ratio should be 50KG=1BAG
Hope this will be helpful.
Regards,
Sandesh Sawant

Similar Messages

How can I change a minus figure on a web page to show in red? Firefox3.6.8 winXP

How can I change a minus figure on a web page to show in red?

I would assume that the website sends negative number with a special CSS class code or uses JavaScript to to change the style afterward.
Did it ever work in Firefox?
Do you see a error in the Tools > Error Console regarding this problem?
"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

How can i change the conversation style in mailbox

Hi i would like to know if it is possible to change the conversation style in the mailbox for i phone 5

Hey JoefJo,
Thanks for the question. Based on the information you have provided, it sounds like you wish to configure the Organize by Thread setting located in Settings > Mail, Contacts, Calendars > Organize by Thread:
Mail settings - iPhone
http://help.apple.com/iphone/7/#/iph5ca4d6a69
Thanks,
Matt M.

How to change UOM conversion rate

I have an item assigned to a UOM. I define the conversion rate like 1case = 500 pieces. Having done that, I transact a few numbers. Now after some time, the business requires that the conversion be changed as 1case = 450 pieces. Now, as I understand, changing the conversion rate from 500 to 450 directly on the existing conversion definition will definitely corrupt the data. Now if I have to define a new conversion, then the system would not let me choose the UOM 'case' on the same item.
Creating a new UOM also would not help as changing the UOM of the item is also not receommended.
What can be the approach in this case? Any pointers or help is greatly appreciated.
Thanks
Khyum Mohammed
Edited by: 817125 on Dec 29, 2010 9:14 AM

Hi,
If the Business no longer uses the 500 pcs conversion, one could Inactivate the conversion and define a new one.
If Business wants to have a choice of using 500 or 450 pcs, then a new Case UOM needs to be defined.
I hope this helps.
Regards
Adarsh Krishna

UOM Conversion changes where conversion is only used for reporting

I think this is a different situation than I've seen in other posts.
We have a UOM conversion from CS to POUND (i.e. 1 case = 30 pounds), and at some point may want to change it so that 1 case = 28 pounds. In our situation, all transactions are done at the CS (primary UOM) and the weight is only used in calculations to print on shipping documents. Is there any harm in just changing the 30 to 28 when that time comes? Again, there are no transactions that reference the weight, no PO's, no SO's, no financials, etc.
We also have a similar situation where a PALLET may contain 100 cases now, but in the future be reconfigured to contain 90 cases. Same idea, nothing is transacted in Pallets, and the conversion is only used in reporting. Seems like it would be OK to change that conversion without causing problems. Any thoughts?
Thanks for your insights!
Bill
(Running r12.1.3 with OPM)

I think this is low risk - just make absolutely sure that the uom was not used for customer pricing, internal pricing, boms, on ASL, on price breaks, on quotes, on POs, on material transactions, wip moves etc.
As long as it was truly used just for reporting, you should be ok.
Sandeep Gandhi

Input Enabled Query - Web Template - Not able to change the key figure.

Hello IP Gurus,
This is a simple question .
I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
I attached the query to a web template.
When I execute the template I am not able to enter or change the key figures.
Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
Thanks
Senthil

HI Senthil,
Please ensure that u have enabled the property " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
regards.
Shafi.

Change Qty Conversion in a contract?

Hello,
Does anybody know how can the Qty conversion EKPO-BPUMN or EKPO-BPUMZ be changed in an already existing contract line?? These fields can be seen by displying the item details in the Quantity and Price box.
I know they can be change in the PIR (info record) but I don't get how to change them in a contract (ME33K)??
Thanks!!
Marc

I close as no replies are given.

Change in Key figures for COPA report

Hi
We have changed some formula using T.code KER1 for a element of Key figure scheme which is used in COPA report.
How do we find out which all COPA reports will get impacted by this change.
Regards,
Rams

that key figure mapping helps you to map the value fields to the std fields (the ones that are included in the std COPA content cubes.) So that you dont end up creating ur own Zfields in BI to correspond to the value fields. If you have a functional guy how can do the mapping or help u do it - go for it .... orelse you can always create ur own Z objects, so that you dont have to go back to source system to figure which IO refers to which value field.

Changing position of figure captions (legends)

Hi, I'm using FrameMaker 9, and I have a question about changing the position of figure captions. Currently in all our docs, figure captions are placed above the figure (above the anchored frame) to which they apply, but the powers that be (much to my annoyance) have decreed that they should appear below the figure. Does anyone know a way of changing the position of all anchored frames in relation to the caption paragraph without having to do it manually for each one?
Thanks,
Jim

The fundamentally annoying thing is that Frame doesn't have "above current line" for anchored frames (AFs) or tables.
Unless you use some run-in or at-insertion-point dodge, or you only need one AF/TBL per column (which could use top-of-column), ya gotta have an anchoring line of some sort above the AF/TBL.
... and the caption is below the graphic, the link jumps to the caption, displaying it at the top of the page.
Hack:
Use a tiny unique paragraph format for anchoring, with a to-be-invisible color View, say "Caption.Anchor", pt size 4, keep with next.
Make the subject caption text the text of that Caption.Anchor paragraph.
Anchor the frame or table to that.
Put the visible caption paragraph on the next line (below the AF), or in the TBL, say, format "Caption.Visible", keep with previous.
Make the text of Caption.Visible an Xref, <$paratex> (only) to Caption.Anchor.
Have the TOC generate for Caption.Anchor. Make all hand-typed Xrefs use Caption.Anchor.
Page loss to an invisible anchoring line* is minimal.
The caption now appears to be below the frame.
Hypertext links go to the top of the AF or TBL.
* This can cause slight topline mismatch in multi-column layouts.

Unity Cobras Import changes speed conversation

Hi we are running latest Unity export and unity connection tools and are migrating from unity version 4.0(4) SR1 to unity Connection version 9.1.1.20000-32
The issue is that when we export from Unity and import to unity connection, the following gets changed:-
Conversation volume is set to low
Conversation speed is set to fastest, although the playback is slowest
The default are set to medium and normal
(phone menu settings)
we can fix this by bulk edit and change everything back but concerned at why the data is getting changed and what else might have been changed that could cause us issues later. Never happened before during migrations from Unity to Connection. I assume the versions are supported with Cobras ?
Anyone seen anything similar ?.....TIA, Jeff

just to follow up for everyone - version 8.0.31 for the Connection Import tool was updated to handle this. this version is now posted on CiscoUnityTools.com
Short version is backups prior to Unity 4.0(5) don't have per user speed/volume stored for messages (as opposed to converation speed) - speed was added in 4.0(5) and volume in 5.0. The Import needs to check the version of Unity being restored and convert a value of 0 (slowest or quietest) into 100 for speed (normal speed) and 50 for volume (normal volume).

Where to Notify About 301 Change After Conversion to HTTPS

Hello,
My website has an approved Podcast channel. Recently for security and other reasons, we have changed the whole website to HTTPS (managed Rackspace), 301 redirection is working fine plus I can manually Edit the XML file to reflect the changes (changes has been deployed 72 hours ago). Support from Rackspace has suggested me to officially notify for the change over email. I will be much helped if any link or email is provided to help me to notify about the change.
(I am not adding the URL here because it is working with 301 and may be, the question will look like a promotive post.)
Thanks in advance,
Abhishek

You don't have to notify anyone regarding Tunes and the iTunes Store. Once the redirect is in place the Store will update and go to the new feed when it next checks the feed - usually within a couple of days. Subscribers will see the change pretty well immediately.
If you are going to use a 301 you should also add the 'itunes:new-feed-url' tag to the new feed so that iTunes and the Store will permanently redirect to the new feed and not be dependent on the 301.
Full details on this page: http://wilmut.uk/move
However https may not be advisable. It certainly used to be the case that the Store would not handle https - I don't know for certain whether it can now do so, though I've seen some evidence that it can - so you should check this with the 301 (which you can presumably remove) before adding the tag.

Frame delay set in frame animation changes after conversion to video timeline?

hi everyone, i'm running photoshop cc on windows 7.
i was trying to make a gif today and went about it the way i usually do - import video frames to layers (1 layer/frame of video), cut out the frames i don't want, then convert from frame animation to video timeline in order to apply filters. in this particular project i had set all frames to a delay of .04s, but when i converted to video timeline the gif seemed to run faster than it had in frame animation. i converted back to frame animation, and for some reason the delay had been changed to .03s - which i'm assuming accounts for the increase in gif speed. i tried inputting different values for frame delay, but they seem to all round to either .03s, .07s, or one of the preset values that appear when you click the dropdown box.
this has never happened to me before. in fact i opened a gif i made recently that had a delay of .05s and once opened the delay had been changed to .07s - noticeably slower than the original gif (which i had opened in IE to compare). i have restarted pscc multiple times to no avail. in fact i just noticed that the "make frames from layers" tool is malfunctioning as well, instead of making one frame per layer, the frames are either blank or they all show the top layer.
is this something that has happened to anyone else? if so, how to fix it? it's very frustrating because i need to be able to convert to video timeline for filters and to add text, which i can't do in frame animation.

Did you ever find a solution to this problem? I'm having this exact issue. I notice that the frame delay only stays the same if I set it to .1, but all other delays are changed to .03 or .07. It's a pain because I have to open every saved gif & change it to the correct time delay. It's so time consuming.

SAPscript - Cheque layout changes - suggestions on figuring out the exact

Hi,
I have been given a cheque layout prepared with a third party software.
This layout has information about all components (check box, check date, routing number, check number...) and where exactly each one of them has to appear on the cheque.
The form has some specifications like '.075 inches space between amount and currency', 'the routing number has to print from box 54 to 47' etc.
Can you please give some guidelines on how to proceed figuring out the location of each page window, paragraph formats, character formats to create etc. I have make sure they (check, address details...) are exactly printed at the specified position.
Version: SAP 4.6c
Thanks in advance.
With Best Regards,
Vidya

Vidya,
Be ready to walk from your pc to the printer workstation umpteen times till you deliver this object.
That is the only way that we can ensure whether the data is getting printed at the desired place or not.
"Cheque printing"-use this key word and search in SDN to see tons of info.
K.Kiran.

Pathfinder - divide changes shape of figure

Hi,
I'm trying to make a leaf. I'm following this tutorial:
How To Draw A Leaf in CS5 Illustrator - Beginner Tutorial - Using the Pen Tool and Gradients - YouTube
At about 2:40 in the video she tries to use the pen tool and pathfinder -> divide to make a line in the middle. When I do the same thing this happens:
As you can see the tip of the leaf doesn't look so good. This is the best result I've gotten after many attempts at this. It is literally impossible for me to use divide the way she does without distorting the shape of the leaf.
How exactly do I fix this issue?
//ekmanch89

ekmanch,
In the Window>Stroke palette, you may change to Round Cap (and Join, those match), or reduce the Miter Limit. The former looks better.

Why does my Logic Pro (downloaded from App Store) suddenly hang when I load it up? Made no changes, can't figure it out.

Suddenly stopped working.
It hangs at 'Loading core audio'. Cannot figure out for the life of me why.
Tried installing a version from disc, but it said it was not compatible with Mountain Lion. I'm running 10.8.2.
Did no updates, nothing. Just suddenly will not work.
Have tried reinstalling etc. etc., but again, nothing.
Help would be much appreciated!
Thanks.

What have you recently installed (such as plugins, drivers other DAWs etc)?
If you hold down the Control Key and then launch Logic Pro, does Logic start up successfully?

Change to Conversion figures in PIR - ME13

Similar Messages

Maybe you are looking for