Change to mark post as a question?

I just posted on the Using Tiger forum. First unmarked as a question then decided to mark as a question. It said I have fifteen minutes to reverse. I didn't see any way to do that when I edited. How does one change back to marked as question?

Thanks. I must have missed that blue box somehow.
In the meantime-it's still early I know-no one has yet replied to that post. Link to that here in case anyone wants to know what we're talking about:
http://discussions.apple.com/thread.jspa?messageID=7762606#7762606
I suppose it takes a fair amount of reading through those links, but maybe the points incentive (which, in fact, always troubles me-not the place to go into that one now), would have prompted more of a reaction. I did, genuinely, just want to get it out in front of everyone, but I was (and still am) hoping someone might have something to add. I hadn't seen anything in Discussions on it and it seems kind of important to Mac users.

Similar Messages

When I OCR two versions of the same document and then compare th documents in Acrobat Pro XI, I usually get the message that there are no changes to mark. However, I know there a quite a few number of changes. I raised this question more than a year ago

When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark. However, I know there a quite a few number of changes. I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents. However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked. When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?

OCR is only for recoginition of the image / picture of text provided by an scanner.
Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image or picture of text - it is the digital text. So, no OCR involved.
When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
Once OCR is performed it is the OCR output that is exported.
OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents".
Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
being processed with Acrobat Pro's Compare can certainly be done.
But - well you've described what can be observed.
Be well...

New number of posts bug(?) + question; no #100, and total # of posts vary

New number of posts bug(?) + question; no number 100, and total number of posts vary
Intrigued by Tuttle's new attempt to join Niel's old habit to keep his own total number of posts count, I went and start counting my posts since the New Discussions. Because I saved my latest Old Discussions Post-and-Points info, I can see what are the previously-still-online ones (the pre- 14-Nov-2005 01:31 GMT ones), and I know exactly what was my "real" total number of posts before 14-Nov-2005 (2446).
My New Discussions posts number however, is quite uncertain.
Firstly, when I use the "My Posts" link on the right, then clicking on and on on the "Next" link,
my "Viewing 91-100 of 586 -- Pages" shows 91-99 instead of 91-100
(= should show 10 posts, shows 9 posts)
then I go on clicking Next Next Next, and I see the same missing counts happen elsewhere:
my posts number 100, 259, 260, 370, 390, 520, 558, 559, 560, 578, 579, and 580 are missing too.
Note that I wouldn't bother doing all this, and I would have thought it's just very old posts that are automatically deleted like in the Old Discussions,
BUT,
the problem is that when I choose to see all my posts together on the same page
(by using the start=0&range=600 suffix in the URL)
I get a total number of posts that is different (570).
A third way to quickly see all posts without having to load too big page
(using the start=0&range=300 suffix in the URL then only one "Next" click)
shows yet another, different again, number of total posts (573).
And my "official" total number of posts is (586).
Dear HOSTS,
- If this can be used as a bug report to fix a counting problem, glad to help.
- If there is no bug, I have two(+) questions then:
1) Was my post number 100 deleted?
(should be around 27-Nov-2005 18:00 GMT)
Also:
I thought the Total Posts number that we see in "My Public Profile" or under the avatar in each post (586), was only the number of posts still online.
- if it is the case, then there are no automatically deleted old posts anymore?
- if old posts are automatically deleted like before, this number should vary?
- if it doesn't vary (it just grows by one per new post), AND at the same time old posts are actually automatically deleted,
it has to show the "real" total number of posts then,
(as it is now, a total starting from the Old-Discussions-still-online-posts, it makes no sense),
that is,
the total posts in the New Discussions PLUS the total posts since first registration in the Old Discussions.
So,
2) What does it show exactly?
Thanks again for all the great work!
Axl
220? 221?

Thank you Andreas,
Your confirmation about the "post #100 bug" does help.
"As for your other missing posts - I guess Tuttle's assessment that they might be deleted is probably right..."
Yes, that makes sense and that's what I'm trying to figure in my OP, but then,
after I posted my "#221/2667 post" (11-Dec-2005 21:51 GMT), my originally missing #
259, 260, 370, 390, 520, 558, 559, 560, 578, 579, and 580
should have become
260, 261, 371, 391, 521, 559, 560, 561, 579, 580, and 581
right? (forget the #100: this one we know for sure it's a bug)
Or if the software counts them from the first (now that would have been a good start) instead of starting from the most recent,
they should become
258, 259, 369, 389, 519, 557, 558, 559, 577, 578, and 579
Well, that's not what happened. Now the missing # are
259, 260, 370, 390, 400, 520, 559, 560, 570, 579, and 580
(in addition to the same #100) (#558 and 578 not missing anymore).
As you can see, there is no logic:
It doesn't work as a simple numerotation of StillOnlinePosts, no matter the order
(otherwise there would simply be a straight count from 1 to 575 (=587-12).
It looks indeed like it shows which old posts are being automatically deleted. That the numbers are quite the same would simply show that the old posts dates were so close, of course they are deleted (six months later) almost at the same time,
BUT,
if it was the case, there would never be LESS deleted posts between two StillOnlinePosts, like it happens for example between my StillOnlinePosts #557 and #561.
Please note: of course I stick to the same method to make all my counts. Not manually modifying the URL, just using the default Next-Next-Next- clicking...
Modifying URL would add yet more differences in the differences!..
Dear Hosts,
Too bad it doesn't help looking yourself at my "My Posts", as everything changes each time I'm adding a reply somewhere.
Perhaps a good way to troubleshoot this would be to start from a very simple basis:
--> "name" the posts with a number, starting from the oldest.
This way, for example my "#1" post (11-Dec-2005 21:51 GMT in this thread) would be named "221" in the New Discussions, or "2667" if you start from my Registration date.
At the moment, it is very difficult to figure what fault comes from the "#100 post bug" and what fault comes from another possible counting bug...
Then the New Discussions "fluctuating" refreshing delay too, possibly messes the counts...
Thanks!
Axl
223/2669

Is it possible to change a marker's color after the fact in Prelude???

I absolutely love Prelude as a program for logging my footage. I have a number of markers that have different colors but I'd like to know if it's possible to change a marker's color after it's been made. I know that this can easily be done in Premiere, but why not in Prelude???
In Premiere you can easily change a marker's color even way after after the marker was made...
...so why can't you change a comment marker's color in Prelude?
Conversely, why is it that Premiere doesn't respect the marker colors made in Prelude and instead defaults them all to green? This should be addressed in the next update.
Otherwise, there's no reason to have multicolored markers in Prelude if they all get changed to the default green once they appear in Premiere.

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Sweet changes to the posting window!

Wow!
Whenever it happened over the course of the day, I'd just like to thank all the folks here that take care of the forum for introducing such nice changes to the posting windows! So many new options ... very nice!
Nice going! Forums looking sweeter and homier!
.. only thing the smiley's don't seem to insert at all by pressing that icon - I get the popup, choose the smiley, but it won't insert. <-- that one was inserted using the "back to basics" method : & ( ...
Steve
Message Edited by icantux on 06-27-2008 04:56 PM
Solved!
Go to Solution.

Steve,
Hmm.
Well, it worked for me here, but I've been having some trouble with it in the new PM editor today, so I agree something is amiss - it's been intermittent for me. Will watch for a day or two and see if it works out - if not, will report as a bug.
Thanks for the compliment. I'll share appropriately. There are some new features available as well, but we need to do a bit more thinking on how best to implement them.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

URGENT-Dynamic News Application. Dynamic Servlet Change method to POST

When I first logon to the Dynamic Servlet I get a form with USERNAME and PASSWORD and Categories and Subcategories to select with a "Create Profile" button. After enetering details I get the next html page which is the news detail page generated out of DynamicIE.xsl.
The Form generated in DynamicServlet uses a defaullt method of GET to submit. I want to change it to POST and did it in the code but it does not work. After I changege the method to POST and I click the "Create Profile" button the next HTML with news detial is not displyed, it just displays the same HTML. I checked the syntax of POST looks fine. I followed the code, when the form is submitted RequestHandler.java reads the params and populates the Category,Subcategory and Types vectors and then the function servlethandler.sendDynamicHTML is called which in turn calls the applyXSLtoXML function. In this whole process I do not see why the next form is not generated when the method is POST and why it is displayed when the method is GET.
I changed the methods to POST for the AdminServlet by making the changes in the Admin.xsl and it works fine.
It is really confusing me as the logic of the code should not have any effect with the form submission method. Any quick help will be appreciated.

We are passing the REQUEST_TYPE as part of the URL. If we use the POST method, those values are not able to catch from the java appalication. The servlet is written in such a way that based on different conditions we are displaying different pages. Since it is checking the value of REQUEST_TYPE there and not matching with the values, it ia again giving the same old page.

HT5312 I can not change the answer to my secret questions

Greetings
I can not change the answer to my secret questions
Thank you

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94138)

If you need help quickly... Guideline for posting an effective question.

Whenever you have a question that you would like answered, do pose that question effectively.
First, do not assume that because you have tried many, many times that your question is understood by someone else. What is obvious to you may not be for another. So please state in a very detailed and structured way what steps you have taken to cause your problem, how you can replicate this problem, under what circumstances on what hardware/software.
The fact that you have nearly given up because of your problem does not mean that someone else can readily understand this problem. When you go to your doctor and say: "I have a pain in my stomach" he will ask you a lot of questions. Same applies here. Your doctor may need to know about any medication you have taken, your blood pressure, history, etc. If you want help, be as PRECISE and ACCURATE as possible.
Second, this is a USER TO USER forum. So ranting will not help. What may help is a STRUCTURED approach to describing the problem you have.
Third, do a thorough search of posts here, on other fora and with Google before repeating what has been asked a thousand times and has worn out the patience of regulars here, who have answered your question a dozen times already. Use the FAQ and the Wiki to find answers to questions that have been posed and answered repeatedly. Do not assume you are unique with your problem. Well, you are unique, the problem you have most likely is not.
Fourth, realize that even though it may be highly frustrating to you to not be able to solve YOUR problem, by posting your question here, you are dependent on fellow editors to help you on their free time without compensation, so bear with them to help identify what EXACTLY is your problem. If you lack that decency, you may forfeit their help, so why did you come here?
Fifth, consider your work flow in light of the purpose of Premiere, an editing package. If you have problems with rotoscoping, programming with APL, spreadsheets in general, word processing on a mobile phone, importing Panda bears into a local zoo, feeding nearly distinct whales in the Alps, or anything far removed from the purpose of PP, you may be better off in posting your question elsewhere.
Last:
Everybody has to learn, has the right to ask questions and be helped.
If everybody has the decency to pose their urgent, life threatening or other questions in a detailed, structured and comprehensible way, it will vastly improve the chances of speedy and helpful replies, without the need for sarcasm, bundles of to-and-fro posts without meaningful help, just wasting bandwidth.
I know I have been rightly accused of such behavior, which was the result of sheer frustration with absolutely meaningless and often pointless questions without details, structure and the like. Maybe this can be a general guideline for posters on how to ask questions, in addition to Eddie's links and How to ask questions the smart way
The most frustrating issues one can encounter are hangs, BSOD's (blue screens of death), system errors and other cases of seemingly random erros that require rebooting, restarting or similar actions, only to be confronted with the next hang, BSOD or system crash.
These errors are often difficult to locate, due to the large variety of systems, components and driver or software versions in use. This is often further aggravated by sheer lack of expertise, understanding of what needs to be communicated in order for others to help solve the issue at hand. And that list is very long.
So, in order to make it a bit simpler for the average user who encounters these problems, follow the following steps when posting a problem:
1. Clearly describe the main problem in the topic, but be brief. Not so brief as to only say: "Help!" or "URGENT" or another meaningless statement but get to the point, like: "PP crashes on opening, requiring a reboot" or "Using DL the system hangs upon return to PP". You get the point.
2. Briefly describe your hardware, software, OS and versions in use, including disk setup, video card and driver versions, etc.
3. Describe source material, including codec (not AVI, which is not a codec), project settings and other relevant info.
4. Describe as accurately as possible what you did, what steps you took, what happened at what moment and what you did to try to resolve it.
5. Go to Start/Run, type in DXDIAG, enter and save all information to a TXT file. Include a link to that file in your post.
6. Go to Start/Run, type in MSINFO32 (or similar for 64 bit OS), enter and save the results as a .NFO file. Include a link to that file in your post.
7. Download Process Explorer , and either post a screen shot or a link to the results.
8. Make a screen shot of the results of SpeedFan or HW Monitor and include that in your post.
When you perform these basic steps, you avoid endless questions about your system and people may be able to help you faster.
If you feel up to it, take a look at The Case of the Unexplained to start your own troubleshooting.
Hope this helps to post more meaningful questions and get an answer much quicker.

Whenever you have a question that you would like answered, do pose that question effectively.
First, do not assume that because you have tried many, many times that your question is understood by someone else. What is obvious to you may not be for another. So please state in a very detailed and structured way what steps you have taken to cause your problem, how you can replicate this problem, under what circumstances on what hardware/software.
The fact that you have nearly given up because of your problem does not mean that someone else can readily understand this problem. When you go to your doctor and say: "I have a pain in my stomach" he will ask you a lot of questions. Same applies here. Your doctor may need to know about any medication you have taken, your blood pressure, history, etc. If you want help, be as PRECISE and ACCURATE as possible.
Second, this is a USER TO USER forum. So ranting will not help. What may help is a STRUCTURED approach to describing the problem you have.
Third, do a thorough search of posts here, on other fora and with Google before repeating what has been asked a thousand times and has worn out the patience of regulars here, who have answered your question a dozen times already. Use the FAQ and the Wiki to find answers to questions that have been posed and answered repeatedly. Do not assume you are unique with your problem. Well, you are unique, the problem you have most likely is not.
Fourth, realize that even though it may be highly frustrating to you to not be able to solve YOUR problem, by posting your question here, you are dependent on fellow editors to help you on their free time without compensation, so bear with them to help identify what EXACTLY is your problem. If you lack that decency, you may forfeit their help, so why did you come here?
Fifth, consider your work flow in light of the purpose of Premiere, an editing package. If you have problems with rotoscoping, programming with APL, spreadsheets in general, word processing on a mobile phone, importing Panda bears into a local zoo, feeding nearly distinct whales in the Alps, or anything far removed from the purpose of PP, you may be better off in posting your question elsewhere.
Last:
Everybody has to learn, has the right to ask questions and be helped.
If everybody has the decency to pose their urgent, life threatening or other questions in a detailed, structured and comprehensible way, it will vastly improve the chances of speedy and helpful replies, without the need for sarcasm, bundles of to-and-fro posts without meaningful help, just wasting bandwidth.
I know I have been rightly accused of such behavior, which was the result of sheer frustration with absolutely meaningless and often pointless questions without details, structure and the like. Maybe this can be a general guideline for posters on how to ask questions, in addition to Eddie's links and How to ask questions the smart way
The most frustrating issues one can encounter are hangs, BSOD's (blue screens of death), system errors and other cases of seemingly random erros that require rebooting, restarting or similar actions, only to be confronted with the next hang, BSOD or system crash.
These errors are often difficult to locate, due to the large variety of systems, components and driver or software versions in use. This is often further aggravated by sheer lack of expertise, understanding of what needs to be communicated in order for others to help solve the issue at hand. And that list is very long.
So, in order to make it a bit simpler for the average user who encounters these problems, follow the following steps when posting a problem:
1. Clearly describe the main problem in the topic, but be brief. Not so brief as to only say: "Help!" or "URGENT" or another meaningless statement but get to the point, like: "PP crashes on opening, requiring a reboot" or "Using DL the system hangs upon return to PP". You get the point.
2. Briefly describe your hardware, software, OS and versions in use, including disk setup, video card and driver versions, etc.
3. Describe source material, including codec (not AVI, which is not a codec), project settings and other relevant info.
4. Describe as accurately as possible what you did, what steps you took, what happened at what moment and what you did to try to resolve it.
5. Go to Start/Run, type in DXDIAG, enter and save all information to a TXT file. Include a link to that file in your post.
6. Go to Start/Run, type in MSINFO32 (or similar for 64 bit OS), enter and save the results as a .NFO file. Include a link to that file in your post.
7. Download Process Explorer , and either post a screen shot or a link to the results.
8. Make a screen shot of the results of SpeedFan or HW Monitor and include that in your post.
When you perform these basic steps, you avoid endless questions about your system and people may be able to help you faster.
If you feel up to it, take a look at The Case of the Unexplained to start your own troubleshooting.
Hope this helps to post more meaningful questions and get an answer much quicker.

How do I change the answers to my security questions?

I got a new ipad2 because the other one broke. I can't purchase from iTunes using gift cards I have in my account. I don't remember the answers to my security questions. How do I change the answers to the security questions?

Start here and do as instructed below.
Can I change the answers to the security questions for my Apple ID?
Yes. You can change the answers to the security questions provided when you originally signed up for your Apple ID. Go to My Apple ID and click Manage your account.
Frequently Asked Questions about Apple ID

How do I change the answers to my security questions ? I forgot them

How do I change the answers to my security questions for my Apple ID ?

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

How do i change the answers to my security questions? i completely forgot them..

how do i change the answers to my security questions? i completely forgot and because of this iTunes isn't letting me purchase on it or download and sync my computer to my ipod so i can downloead the songs back onto this new ipod. help please?

See Kappy's previous write-up.
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

In which Board we need to post cRIO related Questions?

sir,
In which board do i need to post cRIO related Questions and doubts regarding my application with cRIO .Please help me previously i have posted in motion control drives as my application is related to motor control using cRIO.bu i am not getting any reply .i couldnt find any cRIO related board in select board option.
Solved!
Go to Solution.

Hi illa,
You can post your query under the Real Time Measurement and Control
http://forums.ni.com/t5/Real-Time-Measurement-and/bd-p/280

Change of document posted from MIRO

Dear experts,
Is it possible to change the document posted from MIRO?
I want to put "final invoice" indicator on MIRO document.Users do not have authorization to change the PO(because same indicator exists on PO) documents.So, i must find solution not done on PO.
Chris

Hi,
you can't change the posted doc...so..
You need to cacel/reverse the last posted doc....and create a new doc with the final invoice indicator....
Go to MIRO --> Choose Cancel invoice doc > enter the last posted doc number or system may also take last by default-> check the mvt type --> execute
Then go MIRO --> Make new IR doc..
Hope it helps..
Regards
Priyanka.P
AWARD IF HELPFULL
Edited by: Priyanka Paltanwale on Sep 4, 2008 8:41 AM

Can we send pre-test score (Pre-test question slide) and post test score (Question slide) both in lms from captivate?

can we send pre-test score (Pre-test question slide) and post test score (Question slide) both in lms from captivate?

Pretest score normally is not sent to the LMS. However it is stored in a system variable, you could use JS to send it.

How do I send a private message to someone who has posted a previous question or answer?

I have a similar question to one which was posted earlier and I would like to contact the person who asked this question, to see if the advice received helped sort out his problem

Molly K wrote:
AdrianB,
Unfortunately, our current system doesn't have private messaging functionality.
If the thread was recent, the person you are looking for may still be subscribed to it. If they are, then you can post to the thread and a notification will be sent to them and they may respond to you.
If the thread wasn't recent, then the notifications to it have probably all expired. The best thing to do in this case would be to post a new question and reference the old thread in your question. The original person may reply to it or other users may reply and let you know their opinion of the advice given.
Thanks,
Molly K.
NI Web Support & Operations
Hi Molly,
What qualifies as "recent"? In other words, how long until subscriptions have expired?
Thanks,
Corey

Change to mark post as a question?

Similar Messages

Maybe you are looking for