Change user profile when he is alive.

Hi, guys. I have 5 users(2 not very important+3 very very important). And when hard time comes... i need to limit cpu usage of the first 2 to give others to do their job. At the same time i cant't set low cpu usage by default for these two guys... This will be not efficient.
How can I change user's cpu usage on the fly? With out forcing them to login again.
Thanks in advance.

Hi,
It is not possible on the fly.
This is statement from concept guide. Ch:20
"If you set resource limits, then a slight degradation in performance occurs when users create sessions. This is because Oracle loads all resource limit data for the user when a user connects to a database."
Which means that all resource limits will not affect the running session, you need to force login once again if you want to change resource parameters.
Also check parameter RESOURCE_LIMIT is to be set to TRUE.
Dilipkumar Patel.

Similar Messages

How can I Import CA Certificate into a new user profile when it's created

I need to deploy a CA Root Certificate to new firefox user profile when it is created in windows. I Seen somewhere that you could place a working copy of cert8.db in %programfiles%\firefox-installation-folder\defaults\profile and this would get added when a new firefox profile is created. However, the profile directory doesn't exist in the defaults folder and when I created it this method still didn't work.
Is there a way to get firefox to create new profiles with preconfigured Certificates?
Right now when new users open firefox for first time it is unable to connect to any SSL sites through our proxy server until the user adds the proxies ca certificate or it gets added later via logon script (at next user logon).

Update... For anyone looking for a similar solution:
I ended up adding more to my logon script I have it check for a user's mozilla profile first and if not found it will use command line "firefox.exe -createprofile default" to make one. After that I just copy a working cert8.db to that new profile. Then when the user opens firefox for first time, it will detect this new profile, and it will load it along with the correct CA Certs intact...
Also, for existing profiles my script just uses nss certutil to add my proxy CA Certificate to the users profile cert8db.

Change user profile

I need to change user profiles in Windows XP and would like to migrate all of my iTunes music, playlists, etc to the new Windows user account.
I considered copying the user profile with Control Panel | System | Advanced | User Profiles Copy To function, but I'm not sure if this will work and don't want to break anything. Is this the way to do what I want or can someone point me to the correct proceedure to do this?
Thanks, Roy

I suggest consolidating everything to a folder that isn't tied to a user profile.
In XP, everything is stored here by default:
C:\Documents and Settings\ username \My Documents\My Music\iTunes\ and
C:\Documents and Settings\username\My Documents\My Music\iTunes\iTunes Music
See http://support.apple.com/kb/HT1660
Consolidate it to something simple, like C:\Media using these directions
Directions are here - http://support.apple.com/kb/HT1364
This will keep your important ratings, play counts, etc if youa lso copy over that important database file (the ITL file).
Then any user on the PC can use it by pressing *and holding* the shift key while starting itunes.

Updating users profile when infoobject marked as authorization relevant

Hi All,
Consider a scenario where there are some projects in which perticuler infoobject is not authorization relevant but in some upcomming project the same infoobject needs to be authorization relevant.but when i marked this infoobject as authorization relevant then i need to manually insert this new authorization infoobject in each user profile. If there are more than 200 users available then it is not very good idea to include this infoobject in each profile manually. Is there any other way through which we can insert this infoobject in all user profile automatically.
Regards,
Deepak

Hi again.
Go to transaction se38 and create a program with the name ZCHANGE_APPEND_AUT.
Insert the following code:
REPORT ZCHANGE_APPEND_AUT                             .
TABLES RSECVAL.
DATA: T_RSECVAL TYPE RSECVAL OCCURS 0 WITH HEADER LINE,
      T_RANGE TYPE RSEC_S_AUTH_VALUES_RANGE.
SELECT-OPTIONS: ZAUT    FOR RSECVAL-TCTAUTH NO INTERVALS.
PARAMETERS:     ZOBJN   LIKE RSECVAL-TCTIOBJNM DEFAULT '0TCAIPROV'.
SELECT-OPTIONS: ZVALUES FOR RSECVAL-TCTLOW NO INTERVALS.
LOOP AT ZAUT.
   LOOP AT ZVALUES.
      T_RANGE-IOBJNM = ZOBJN.
      T_RANGE-SIGN = 'I'.
      T_RANGE-OPT = 'EQ'.
      T_RANGE-LOW = ZVALUES-LOW.
      CALL FUNCTION 'RSEC_INSERT_FLAT_AUTH'
         EXPORTING
            I_AUTH = ZAUT-low
            I_RANGE = T_RANGE.
       CLEAR T_RANGE.
    ENDLOOP.
ENDLOOP.
Activate the program.
Now when you run this program you'll be prompted for 3 parameters.
The first is a list of Analysis Authorizations names that you wish to change.
The second is the name of the InfoObject you want to insert to those authorizations, by default is 0TCAIPROV but you can change it to whatever you want
The third is a list of values that will be inserted for those InfoObject.
Therefore imagine that for authorization ZZZA, ZZZB and ZZZC you want to insert the object 0CUSTOMER with the values xpto, yyyy, and wwww.
You would in this case run the program with the following parameters:
AUT:
ZZZA
ZZZB
ZZZC
OBJN:
0CUSTOMER
VALUES:
xpto
yyyy
wwww
Please assign points,
Diogo.

Windows 7, had to change user profile, lost all my Thunderbird info. please help.

Worm or virus caused me to have to change my user profile in Windows 7. I have everything back looking more or less like it did before this disaster on my computer and I am once again able to get into Internet Explorer but when I go to my Thunderbird email, it is as if I have never used it before and it wants me to set it all back up again. All contacts are gone and all my old emails etc. How can I proceed to try to fix this problem?

I just hope you know what you're doing. How those registry manipulations would eliminate a virus infection is a miracle to me. Having said that, viruses are rare today, being infected with some sort of malware is much more likely.
In any case, this is what we have so far:
The old Windows account is underneath 'C:\users\john'.
The new Windows account is underneath 'C:\users\john.john-pc'.
There is an 'appdata\roaming\thunderbird folder in both Windows accounts.
Please confirm.
Also, in the 'john' Windows account there is a Thunderbird profile 'C:\users\john\appdata\roaming\thunderbird\wmekpsyz.default'.
It has a date of /1/29/2015. This would indicate it's a rather new profile. Can you confirm this is your old Thunderbird profile? If so, it should contain all your mail.
What Thunderbird profile do you see underneath 'C:\users\john.john-pc\appdata\roaming\thunderbird?
Can you post the contents of the file profiles.ini for both Windows accounts?

Maintaining user profiles when upgrading from v24 to newest version 36.X - Enterprise

Hi,
Im going to upgrade the Mozilla Firefox for about 500 users ish. The current version is 24.0 and we are upgrading to the newest version 36.0 something.
But the question is, how do I maintain all of the user settings when doing this upgrade? It is not an option to upgrade using the application itself. We have a centralized Config Mgr 2012 R2 solution. And I need to keep all of the user profiles with bookmarks, saved passwords, etc etc as it is today. The current version they are using have a few restrictions made with predefined and locked prefs in forms of automatic update, homepage, disabling the send data to Mozilla and so on, basically all of the standard enterprise configuration when you want to controll how the browser is for the users.
I've read a few articles on where to find spesific files, and what they are containting of information for the profile. But when doing a uninstall of the current version mozilla also removes whatever is stored in %appdata%\mozilla firefox\...profiles..
Is it even possible to "transfer" profiles for Version 24 to the newest version 36.something? Also, this needs automation, its not an option to manually restore each profile from "backup" for about 500 users. All profiles are unique.
Client computers are running Win 7 - 64bit OS.
Best Regards

To answer your question, when you update from 24 to 37 (the actual latest version) your profiles will migrate automatically, there should be no action needed on your part. We try to minimize profile breaking changes, so between versions 24 and 37 there is no need to do any special migration (that is only really a need when going from Firefox 3.6 or older to the latest version).
HOWEVER, since you are an enterprise and it looks like you only do upgrades every so often, I'd suggest you look into Firefox for Enterprises. https://www.mozilla.org/en-US/firefox/organizations/
This version only updates major versions once a year (so from Firefox 10 to 17, from 17 to 24, from 24 to 31, from 31 to 38) but it comes out with regular security updates every 6 weeks. This way you don't have to continually re-certify Firefox major versions every 6 weeks, and can simply let automatic updates push out security updates to your users every 6 weeks (With your current model your users are vulnerable to all security holes found until you push the next major update). Then, next year, you have a 12 week overlap between versions to test and make sure nothing breaks before you push to the next major version.
There is also a mailing list for you to get help and advice with specific Enterprise issues.
If you decide to go this route (which I would strongly advise) then I'd suggest you wait for a couple of weeks until Firefox 38 comes out, the next ESR version. Then you can certify and not have to worry about deployments until 45 next year!

Changing user profiles activity

Hi everyone!
Anyone there who can help me on how I can change a user profile by maintaining a SAP_all profile but his access to activity is only "Display"...
Thanks,
Bryle

Hello Bryle,
If I am understanding you correctly, you want to create a user authorization profile similar to SAP_ALL, with the difference being that your new profile should only allow to display everything instead of also being able to change and add things like in SAP_ALL.
As far as I know, the only way to do this requires some manual work:
1. Create a new role in the profile generator transaction PFCG according to your current naming conventions for role generation, e.g. "Z_DISPLAY_ALL".
2. Wihtin the "Authorizations" tab, create a profile for the role and save your role. You can also add a description and a transactions menu for the role on the other tabs if you like.
3. From the same tab open up the profile editor by using either the button "Change Authorization Data" or "Expert Mode for Profile Generation".
4. If you did not add any transaction to the role menu, a dialog will appear asking you if you want to copy authorizations from one of the listed SAP standard profiles. Normally SAP_ALL is not listed here, so you can just close the dialog.
5. From the menu, choose "Edit --> Insert Authorization(s) --> From Profile...". You can then just enter "SAP_ALL" in the appearing dialog box. This will copy every authorization object from SAP_ALL into your new profile, keeping SAP_ALL intact.
6. Check if the organizational levels are all set to the generic value "*".
7. Take some time and edit the objects in your new profile, so that all activity-related fields are limited to "display" and "display changes" (where available).
8. Once you are done, save the profile and generate it.
9. Transport your new role into other systems if necessary.
10. Assign your new role to the users who need it.
The editing of the new profile really takes a good deal of time because of the huge amount of authorization objects copied from SAP_ALL. I did the same thing and even added everything from SAP_NEW, just to be sure that nothing was missing. At least you can save the profile every time and leave the editor even when you are not finished (without generating the profile).
You should also look very closely at every single object. Most of the time, if there is an activity field (named "ACTVT"), it will use the standard acivities where "03" stands for display and "08" stands for display changes (the values in the technical view of the profile). The activities will normally be limited to the ones which make sense for the relevant object.
However, some objects like F_REGU_BUK and F_REGU_KOA (just to use an example) will not only use a different field name for the activity-related field, but also different values for the acivities themselves. You have to take a closer look at the value list for the activity field or - in a case like the one of the above mentioned objects - at the online documentation for the objects.
Also, some objects can be completely deactivated for a "display only" profile, e.g. F_LFA1_AEN.
As long as SAP doesn't change the basic structure for authorizations, this seems to be the only way to do it...
Greetings,
Markus

Change user password , when DB is in mount state

Hello,
1. How to check user status , when database is in MOUNT stage. ? (Locked/Expired)
2. Is it possible to change the password of the user SYSTEM , while database is in mount state.?
If DB is open , we can query DBA_USERS table and can get the details of users (username, account_status,lock_date,expiry_date, etc...)
But , is it possible to query these data, when the DB is in MOUNT state.
3. Im having SYS authority. I want to change the password of SYSTEM user, and make SYSTEM unlock in the Standby Database. (Which is in mount state).
How can i do this?
regards,
Zerandib

How to check user status , when database is in MOUNT stage. ? (Locked/Expired)You cannot check the user status when the database is in mount stage. You need to have the database is open mode to check the status of the users.
Is it possible to change the password of the user SYSTEM , while database is in mount state.?It is not possible to change the password of any user when the database is in mount state. Open the database and then change the password.
If DB is open , we can query DBA_USERS table and can get the details of users (username, account_status,lock_date,expiry_date, etc...)
But , is it possible to query these data, when the DB is in MOUNT state.No. Not possible.
3. Im having SYS authority. I want to change the password of SYSTEM user, and make SYSTEM unlock in the Standby >Database. (Which is in mount state).
How can i do this?Answer to this question was given in your previous thread created nearly 12 hours back. It makes no sense to change the password on the standby database. It a mirrored copy of your primary database.
Change the password of the user in primary database and perform a log switch. The password would be changed on the standby as soon as the log is applied on the standby database.
Whenever you try to change the password of a user in mount stage,you get an error message saying "shutdown is in progress". So change it only when the database is open

Lost all files and applications installed after changing user profile in the registry of windows 8.1 pc

The original user profile on my windows 8.1 pc is C:\Apple\acer sm. I tried changing it to C:\Apple\Apple. After I rebooted my PC, I found out that all my files and applications are lost. What shall I do to recover them?
Your help would save my life. Thank you!

Hi AppleMist,
We wonder if you changed the registry entry or path of user profile.
If you did that in registry please try changing it back.
After changing your user profile and reboot, system won’t read the profile you changed but a new user profile (C:\Apple\acer sm or TEMP) should be created by system. Try renaming this new one as acer sm.old and changing the apple back to acer sm.
It should works fine if you didn’t change file in profile, if it doesn’t work perform a system restore.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can I change user profile of an IPOD but keep all of the music and information stored on it?

A friend updated my IPOD with all of their music with their profile. However, I would like to make changes but keep most of the music that was uploaded. Can I change the user profile (username and password) of an IPOD but keep all of the music and information stored on it?

Your frend does not have the right/lience to give the music to you. You should delete that music.
If he set up the iPod with his iTunes account you should restore the iPod from a backup of the iPod that should be on your computer. That will delete his music but restore your settings.

Changing user profile attributes via the admin console

Hi all,
I created my own login module (like the existing Membership module) which
extends the Login class. It works just fine, and can create user profiles
and allow people to log in. When I log into the admin console and try to
bring up the user profile to edit the attributes for this module [Manage
Domains->(domain)->(role)->Users->(user)->Authentication(authentication
module)] it displays an error stating 'This profile contains no data which
can be administered.' It also does this when I create a user via the admin
console. I know the profile exists (the user can log in, and doing a
'ipsadmin get user (user)' produces the profile). In the login module XML,
all the necessary attributes are set as "userConfigurable=TRUE" with the
right privileges. Looking at the Membership module as a template, I saw it
puts a configuration file in the '/opt/SUNWips/locale' directory which is
used apparently for editing the profiles created by this module. I made a
similar one for my module, but the same error occurs. Does anyone know what
I am failing to do?
Thanks,
Mark

Hi,
After creating your own Authentication module You have to import your "iwtAuth[NewModule].xml" to the profile server.
You can find a sample file for Membership module
" iwtAuthMembership.xml" at "/etc/opt/SUNWips/xml".
Modify "iwtAuthMembership " in the above xml file with "iwtAuth[NewModule] "and import the
"iwtAuth[NewModule] .xml" using
# ipsadmin -import iwtAuthNewLogin.xml
and restart the server.

Changing User Profile

Hello,
Would anybody happen to know how we can change the telephone or fax number in our user profiles? The areas are grey for me and can't be edited. Do I need to contact somebody to do this for me?
Thanks!

Hi Diana,
Have you tried to change it at accounts.sap.com? You should be able to edit your personal contact details there. If you have issues, the alternative is to contact the Customer Interaction Center at http://support.sap.com/call1sap
Cheers,
Kristen

Change user profile name

deborahfromcynthiana wrote:
another question
I have been using this forum for three years now and when I logged in
with new computer I got the user name above - given to me - not what I want. I cannot change it
in the profile - no option to do this.
How do I change it?
thx
debcoo

Stop using this account and create a new one.

Mountain Lion change color profile when use discrete video card

MacBookPro mid 2010. Update Samsung SSD 830.
Mountain Lion 10.8.2 just installed (new installation).
Reset PRAM and SMC. Done. No result.
Try with GfxCardStatus. No result.
When the system uses the discrete video card changes the color profile.
I'm not the only one with this problem.
Someone managed to solve the problem (really)?
I DO NOT ACCEPT COMMENTS OR ANSWERS USELESS.
Sorry, but slightly altering after losing three hours in forums where no one ever answered ...
Thanks.
Stefano.

Let's see...
Sounds like you're running into an expected issue if you make an alias to removeable media. The same thing would happen if you made the alias to a folder on a DVD-R disc or CD-R. If you eject the original, you disable the alias.
If you copy the entire SD card volume to your drive, the PRIVATE package should copy across. Then, as a folder on your hard drive rather than a volume on removeable media, you could make an alias to the STREAM package for quicker access later.
I'm pretty sure that Handbrake, like Prmeiere Pro, can see the MTS files directly. That is, it's not dependant on the other folders in the PRIVATE directory sturcture. As such, you could copy the contents of the STREAM package to another folder on your drive. Just be mindful of the default MTS file names if you're using more than one SD card (you don't want to accidentally copy 00001.MTS from one card over 00001.MTS from another card).
As long as Handbrake sees MTS directly, you could even rename the MTS files after you've copied them.
On a side note, I almost always archive my SD cards with the data structure intact. More often than not, that file structure is important to corretly access the video stored within that structure. If something unexpected happens while working with the MTS files, it is good to have the original file structure to go back to. Although, SD cards are getting to be so low cost that sometimes I just label the SD card and store it for archiving.
-Warren

Programmatically changing user preferences when creating an InfoView user in code

Post Author: rickp101
CA Forum: .NET
I am very new to BO (using Business Objects 11.5) so bear with me if I am not clear or seem to have no idea what I'm talking about.
As a .NET Developer I have been asked to work on a project that involves creating new BO users and logging them in from an ASP.NET application (in order to mimic a single sign in system from another piece of software). I have found most of the information I require for this in the .NET SDK. However there is one function the client would like that I have not been able to find a solution for, and that is to change the users document viewing preferences.
Within InfoView, if you go into user preferences, under the General tab there is the following option:
For each document, show me ...
descriptionownerdateinstance countactions and description (if selected) initially not hidden
I think by default all of the boxes are checked however the client only wants the description showing for each user when they are set up. Is this something that can be modified within the code when the user is created or is each user going to have to change this themselves manually once logged in?
Any help will be much appreciated.
Richard

Post Author: Ted Ueda
CA Forum: .NET
The InfoView settings aren't documented, unfortunately, but with sufficient trial-and-error, you'd be able to determine the correct values.
The settings are stored in the SI_DATA property 'desktopsettings' for a User object - you can have a look by logging onto 'Query Builder', accessible from the admin launchpad, and entering a query of the form: "Select SI_ID, SI_NAME, SI_DATA From CI_SYSTEMOBJECTS Where SI_KIND='User' And SI_NAME='<username here>'".
You'd see that, if you've specified the properties manually in InfoView (the property is not there by default) that it consists of '&'-separated key=value entries.
You'd retrieve the value via Enterprise .NET SDK call User.GetProfileString("desktopsettings"), and set new values via User.SetProfileString("desktopsettings", <new string value here>).
The specific values you're interested in are booleans dv0=1, dv1=1, dv2=1, dv3=1, and dv4=1.
Sincerely,
Ted Ueda

Change user profile when he is alive.

Similar Messages

Maybe you are looking for