Change Windows Title in run-time

I can change windows title in File-->VI Properties--< Windows Title.
I wish You write in a string box change the windows title. How can i made it?
Thanks.

GerdW,
If you open a reference, and then, in a loop, change the title, there is no
problem.
But if you open a reference and change the title in a loop, you get problems
when you don't close the reference. This does not happen when you don't use
the Open VI Reference.
The attached VI will hopefully clear things up...
Regards,
Wiebe.
"GerdW" wrote in message
news:[email protected]..
> Hello Wiebe,
>
> what do you mean with new and old reference? Does the reference of the
> vi change, when you change the FP.Title property?
> I have a vi, that runs as long as I'm sitting in front of my computer
> (say 10 hours a day). It sets the title every 90 seconds to signal
> running pr
ocesses in Windows taskbar. I close the reference on vi exit
> and never realize some memory leaks.
>
> Best regards,
> GerdW
[Attachment Change Title Leak.vi, see below]
Attachments:
Change_Title_Leak.vi ‏50 KB

Similar Messages

No option to change Window Title Bar Font in gnome-tweak-tool

Hey there,
did a fresh install today on a Haswell-PC. But there's no option to change Window Title Bar Font in gnome-tweak-tool anymore? All the other options are there.
Is there a way to set the Window Title Bar Font elsewhere? Does someone know why this option was removed or is it due to my system somehow? I also don't see this option in the dconf-editor.
Gnome 3.8, all the latest updates, Intel Core i5 with Intel HD 4600 Graphics
Thanks,
oSIRus
Last edited by lohmeyer (2013-07-18 18:27:24)

b4nk4i wrote:I thought that maybe this is gnome-tweak-tool obsolete. But if you say few days ago you solved the problem again, than the version of gnome-tweak-tool should work. strange...
Hi,
Didi you solve this issue? I have a similar problem.
Thanks,

How to change windows title

Hello friends
How can I change the title "Oracle9iAS Forms Services - Microsoft Internet Explorer" to "my title" at forms run time?
From
Chirag Patel

Chirag,
which icon do you mean, the Browser icon? There is not much that you can do against it. Though a Browser allows you to change the title from a HTML page, you don't have access to the icon.
Frank

[CS4 Mac] Change PictureWidget image at running time.

Hello,
I have a PictureWidget on a panel - by default it displays a PNG file loaded from resources.
It can also display error icons when a query fails - etc: these icons are loaded from plugin's 'PICT' resources.
So far so good.
Now - when a query doesn't fail it would need to display an image stored as a 'PICT' file on a server: the query result is telling me which 'PICT' file is to be displayed in the PictureWidget.
For QXP I was using DrawPicture() to draw the PicHandle directly in the item rectangle.
Switching it to InDesign - I am looking for a recipe to achieve same result but following InDesign SDK means and spirit.
In other words - how do we change a PictureWidget image at running time in order to display a PICT files from server instead of built-in default PNG or 'PICT' resources.
Any pointer or direction to achieve this would be very much appreciated indeed.
Best regards
Patrick Perroud

Hi,
I have to add a image on a dialog, I am able to add a image on Windows by associating a image resource ID with image path in .rc file. But not able to do the same on mac. How can we associate image resource ID with image path on MAC?
Thanks in advance.

How to change the skin at run time

I am using jDeveloper 11.1.1.3 for ADF.
My UseCase: i want to give a dropdown for skins. User should be able to select the skin at run time and it should be loaded. Please let me know how can i achieve it.
Zee

As per usecase, looks like you have the LOV containing the different skins.
You can ensure that the application is skinned according to the selected value in the LOV.
Ensure that you have a session scope variable that is set, whenever you change the LOV.
For more details, look into this link http://download.oracle.com/docs/cd/E14571_01/web.1111/e10140/skinning.htm
Thanks for your reply, but then...... what will be the skin loaded by default before the user selects the skin - drop down. Do i have to set something default before hand .?Define the LOV such that there are no empty elements. i.e the first element in the LOV is selected.
In the Managed bean, if the session scope is not set, return the skin family for the first element. This would be the scenario when the application loads.
Thanks,
Navaneeth

Changing Window title programmatically

I'd like to change the Windows title of a 10g Form whenever the user moves to a different canvas. I know I can change the title with the Set_Window_Property built-in but how can I detect when the canvas has changed?

Why don't you want to use the When-Mouse-Click trigger ?Maybe the user can use Tab to navigate to a new canvas. And blocks can be split over 2 canvases, so when-new-block might not work either.
A form-level when-new-item-instance trigger which reads the canvas property of the item would probably solve the problem. It's a bigger overhead that you need but it's uncomplicated programming.

Change display pattern at run time

I have a date/time field which has display pattern set as MM/DD/YYYY...
During run time, if user clicks on a check box...the display should change to DD/MMM/YYYY...How can i do that?

You can do this with a little bit of script on your check box's Click event (in FormCalc in this example):
if ($ == 1) then
DateTimeField1.format.picture = "DD/MMM/YYYY"
else
DateTimeField1.format.picture = "MM/DD/YYYY"
endif
The trick is to know that in XFA, what Designer refers to as the "Display" picture is the <format> node which contains a <picture> which, in turn, contains the "display" picture; or, the picture used to
format the field's value for display purposes.
I've attached a sample form which demonstrates this.
Stefan
Adobe Systems

Change Item Type at Run Time!!

Hi all,
I am using apex 4.0, and I want to know if their is any plug-in that can help me to change the type of an item at run time.
what exactly i want to do is to change the type of an item according to the value of a select list, for example when the user select a specific value from the select list,this item should be displayed as a date piker.
so, can any one help me?
thanks in advance,
Ola,

Hi,
Here is sample
https://apex.oracle.com/pls/otn/f?p=40323:81
When you select "Date" from select list and submit Field is changed to datepicker.
I did create select list P81_SELECT with static LOV
STATIC2:Text;T,Date;DNormal text item P81_FIELD and to page JavaScript Execute when Page Loads
if($v('P81_SELECT')=='D'){
$('#P81_FIELD').datepicker({showOn:'both',buttonImage:'#IMAGE_PREFIX#asfdcldr.gif',buttonImageOnly:true});
}Regards,
Jari

CR2008 - Set chart titles during run time

Hello community!
Is there a way to change the chart titles during runtime with the fullversion?
I have the following code to change the text of the "FieldHeadingObject" and "TextObject" and this is working.
foreach (CrystalDecisions.CrystalReports.Engine.ReportObject repObject in sec.ReportObjects)
   if (repObject.Kind == ReportObjectKind.TextObject ||
       repObject.Kind == ReportObjectKind.FieldHeadingObject)
        ((CrystalDecisions.CrystalReports.Engine.TextObject)repObject).Text = "my new Text";
How can I change the titles of the chart object?
I know already that there is the class "ChartTextOptionsClass"
Does someone know how I could access the TextOptions in the ChartObject so that the new Titles are displayed in the report?
Thank you
Alex

Hello Ludek!
Thank you for the example code. I modified them to meet my requirements.
void LoadReportLanguageResources(ReportClass report)
   foreach ( CrystalDecisions.CrystalReports.Engine.Section sec in report.ReportDefinition.Sections)
      foreach (CrystalDecisions.CrystalReports.Engine.ReportObject repObject in sec.ReportObjects)
         if (repObject.Kind == ReportObjectKind.TextObject ||
              repObject.Kind == ReportObjectKind.FieldHeadingObject)
            ((CrystalDecisions.CrystalReports.Engine.TextObject)repObject).Text = "test";
   CrystalDecisions.CrystalReports.Engine.ReportDocument rptDoc = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
   CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument rptClientDoc;
   report.Load();
   rptClientDoc = report.ReportClientDocument;
   CrystalDecisions.ReportAppServer.ReportDefModel.ReportObjects myCharts;
   myCharts = rptClientDoc.ReportDefController.ReportObjectController.GetReportObjectsByKind(CrReportObjectKindEnum.crReportObjectKindChart);
   foreach (CrystalDecisions.ReportAppServer.ReportDefModel.ReportObject oldObject in myCharts)
      if (oldObject.Kind == CrReportObjectKindEnum.crReportObjectKindChart)
         CrystalDecisions.ReportAppServer.ReportDefModel.ChartObject oldChart;
         CrystalDecisions.ReportAppServer.ReportDefModel.ChartObject newChart;
         oldChart = (CrystalDecisions.ReportAppServer.ReportDefModel.ChartObject)oldObject;
         newChart = (CrystalDecisions.ReportAppServer.ReportDefModel.ChartObject)oldChart.Clone(true);
         newChart.ChartStyle.TextOptions.Title = "My new Title";
         newChart.ChartStyle.TextOptions.DataTitle = "My new data Title";
         newChart.ChartStyle.TextOptions.SeriesTitle = "My new series Title";
         rptClientDoc.ReportDefController.ModifyChartObject(oldChart, newChart);
But I am hvaing problems with the method modifyChartObject(oldChart, newChart). When the method is called i get an COMException with a message like "The data fields of the diagramm are not valid" (German message: "Die Datenfelder des Diagramms sind ungültig"); ErrorCode -2147213287;
LoadReportLanguageResources is called via the following functions - I left out the outermost functions where the reportingList is loaded and the parameter is built.
//Checks the list with the report items and call the main load method
void IReportView.LoadHusReport(IList<HusRepItem> reportingList, BDEA01RangeParameter parameter)
   if ( reportingList.Count > 0)
      reportClass = new repHusReport();
      reportClass.SetDataSource(reportingList);
      LoadReport(reportClass, "Hus Station Report", parameter);
void LoadReport(CrystalDecisions.CrystalReports.Engine.ReportClass myReport, string title, BDEA01Parameter parameter)
   //check the parameters
   //set the parameters for the report (start and end time of the displayed report range)
   myReport.SummaryInfo.ReportTitle = title;
   if(reportViewer == null)
      crCrystalReportViewer = new CrystalReportViewer();
      reportViewer.Child = crCrystalReportViewer;
   LoadReportLanguageResources(myReport);
   crCrystalReportViewer.ReportSource = myReport;
Is there something I have forgotten?
I checked the datafields of the old and the new chart and both have 0 entries before the ModifyChartObject method is called.
If the method is not called, the report is functioning and all values/diagrams are displayed correctly.
Thank you Ludek for your help.
Alex
Edited by: Alexander Frwirth on Jul 7, 2010 10:13 AM

Is there any solution to change window title of web access client?

Hi All,
Is there any solution to change browser window title of web access client and Oracle Collaboration Suite Calendar?
Regards,
Beomwoo.

While looking at such a tab, click View > Show Path Bar from Finder's menu. The information you are requesting will be displayed at the bottom of the window.

Change Window Title

How can I include Employee Number on a window title in addition to employee name which is already displayed (Oracle HRMS). e.g
in Adjust Balance window title appears as: :
Adjust Balance (Last Name, Mr. First Name)
I want it to be :
Adjust Balance (Last Name, Mr. First Name, Employee Number)

Currently your code would be something like
app_window.set_title('ADJUST BALANCE', arg1,:block.last_name,:block.first_name);
Modify it to
app_window.set_title('ADJUST BALANCE', arg1,:block.last_name,:block.first_name,:block.EmpNumber);
However the combined length should be no more than 250 characters.
Regards

[partiallySOLVED] changing window name of running urxvt

Hi,
Is it possible to change the window name of an running urxvt-terminal via external script (as in: not running in the urxvt-terminal itself)?
I have no idea how i could do that ... is it even possible at all?
EDIT:
Why?
To change the name/title of a urxvt-terminal running mcabber when a new incoming message is detected ...
Thanks, atcq
Last edited by atcq (2009-04-24 12:53:41)

sure.. this is true for the first start of the terminal ... and you can also do that by using the -name NAME option of urxvt!
i wanted to change a specific terminals (say started with the -name mcabber option) window_name!
found a solution which doesn't work with openbox , had it tested by someone running debian and xfce ... maybe it works with arch and xfce, too!
no idea why it won't work in openbox though!
you need community/wmctrl
pacman -S wmctrl
to use it in mcabber:
~/.mcabber/mcabberrc
set events_command = ~/.mcabber/eventcmd
set events_ignore_active_window = 1 # not necessarily needed!
needs to be set
~/.mcabber/eventcmd
#!/bin/bash
# testing if message is an incoming message from JID
if [ "$2" == IN ]; then
wmctrl -r mcabber -T "new msg from $3 - mcabber"
fi
# resetting window_name to default if all messages are read
if [ "$1" == UNREAD -a "$2" == 0 ]; then
wmctrl -r mcabber -T "mcabber"
fi
exit 0
instead of changing the name of urxvt, i now use notify-send with xfce4-notifyd to notify me about new messages in mcabber ...
maybe it helps someone else ... i'm fine with notify-send!
Last edited by atcq (2009-04-24 12:52:06)

Changing window title

Hello,
I am trying to change title of main window, but without luck.
I tried use external call and javascript, but it always shows, that Adobe Flash Player stopped, because of security. Same with getURL.
I am trying to implement website into my .NET application, so It's unacceptable to have these errors.
I would like to know, how to change title via ActionScript 2.0 or 3.0.
Thank you.

You're absolutely right. I have no idea what it is that you want. Do you want me to look up a browser message alert for you? Do you want to know how to write a particular function in actionscript? I understand that you're not a native speaker of English and I'm very patient with your efforts to make your needs known, but its not working very well, at least for me.
I don't have any idea what your base question is. I thought that you wanted to change the name of a browser document. I explained in my last message that you can only do that if you refresh the page. In your third message you said:
As i said, I tried to execute Javascript with getURL or External.Call
(or how does this function is called), but it always shows "Adobe Flash Player has stopped a potentially unsafe operation".
In an effort to clarify, I replied that you needed to use ExternalInterface.call() to a Javascript function. The clarification was both to your incorrect reference above and to the fact that you needed to use Javascript to communicate from Flash to the DOM. The unsafe operation that is referenced in your quote is, most likely, to the Flash player settings that you have set, or, that you are using Internet Explorer. Neither of which I can fix from here.

Change windows title in Portal 60

Hi.
When we navigate page in porta1, We have page title in browser title for example "Portal Support Desk - Enterprise Portal 6.0 - Microsoft Internet Explorer".
In above, "Portal Support Desk" is a page title and "Enterprise Portal 6.0" is a portal title.
So, I thihk portal has "Page Title - Portal Title" pattern.
Is there any way to change this pattern ?
Actually, We want to change this to "Portal Title - Page Title" .
Regards, Arnold.

Hi Arnold
do the following in portal
system administration -> system configuration ->under detailed configuration choose service configuration
under portal runtime -> central configuration double click to open it
find out following portal.html.head.title
change the value SAP Enterprise Portal 6.0 to ur value.
save ur changes. ( save button is below at end of page)
restart the J2EE server.
regards,
kaushal

Change style property at run time

Hi,
I have one table with update icon(as column), if i click that icon of any row means it needs to change the table as editable.
I don't know whether it is possible or not.
If possible means please tell me how to do that.
Thanks
SAN

Hi San
Yes it is possible.You need to make use of SPEL and PPR for that.I have exact scenario on my blog.You can refer
http://oracleanil.blogspot.com/2010/08/how-to-make-read-only-selected-row-in.html
Thanks
--Anil

Change Windows Title in run-time

Similar Messages

Maybe you are looking for