Changes Happening in Portal

Hello Folks,
I have a requirement.
I want to create a component and what that component should do is whenever any properties are changed or any changes are happening in the portal, it should fetch that user name and send a mail to specific users or group of users saying that the changes are been done in so and so iview in so and so date by this user.
How can this be achieved.
Thanks & Regards
Kumar

I don't think that the above suggested solution will work since this are changes in the pcd and not in a service configuration.
This is rather hard to implement since you might get many calls and it will slow down you performance if you'll send the mail in the same thread as the change event.
Anyway - You can add PCD Listeners (this is not public API) and register to the events. Note that you will not be able to track who has changed what all the times since some applications uses technical user for the sake of saving their content.
Better with less performance  penalty is to search on a daily basis what was changed (according to LastChangedDate) and send the responsible administrator (according to LastChangedBy). Make sure that you search on unit levels only otherwise you'll create memory load while search is running.
I also think that such functionality exist in the support platform.
Elisha

Similar Messages

  • How to get notified when changes happen on Hyper-V host or VMs

    Is there a way to get notified on Hyper-V host or VM changes? Our intention is to notify the system-administrators on any changes.
    1. How to get notified when new VM is created (or deleted) on Hyper-V.
    2. How to get notified when any memory/CPU/disk is added (or deleted) on any VM(s).
    In general: 
    - Get notified when any changes happens to Hyper-V host.
    - Get notified when any changes happens on any VMs.
    Our target servers are Windows Server(2008, 2008 R2, 2012, and 2012 R2)
    We tried to get the notification using "Event Viewer" on different Windows servers (2008, 2008 R2, 2012, and 2012 R2)
    We were able to get event-logs only on one of our 2012 R2 server as described below on creation/deletion of VMs (on another 2012 R2 server, we did not got any such event, Is there any setting required on host computer to get Hyper-V event-logs in "Event
    Viewer"?)
    Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
    Source:        Microsoft-Windows-Hyper-V-VMMS
    Date:          12/18/2014 1:21:45 AM
    Event ID:      13002
    Task Category: None
    Level:         Information
    Keywords:      
    User:          SYSTEM
    Computer:      HPHyper-V.COMPUTERNAME.lab
    Description:
    A new virtual machine 'TestVM' was created. (Virtual machine ID A0FED305-7B1A-4BB5-952C-BA9634ACDA45)
    Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
    Source:        Microsoft-Windows-Hyper-V-VMMS
    Date:          12/17/2014 10:57:01 PM
    Event ID:      13003
    Task Category: None
    Level:         Information
    Keywords:      
    User:          SYSTEM
    Computer:      HPHyper-V.COMPUTERNAME.lab
    Description: The virtual machine 'TestVM' was deleted. (Virtual machine ID A0FED305-7B1A-4BB5-952C-BA9634ACDA45)

    Thanks for your reply,
    Just to make it more clear:
    In our environment we have enabled Hyper-V on following Windows servers: 2012 R2, 2012, 2008 R2, 2008. The environment is very dynamic, VMs are getting created and deleted very frequently. Our intention is to get notified by any means on VM creation/deletion,
    currently we are relying on event-logs (we are OK with any different mechanism for such notification if there exists, i,e other than event-logs)
    We were able to get event-logs only on few of our 2012 R2 server on creation/deletion of VMs. On another 2012 R2 server, we did not got any such event (do we need to make some settings on 2012 R2 to get events? If yes, what are those settings).
    Also we are not getting any such event of VM creation/deletion on our Windows Server 2012, 2008, 2008 R2. Is there any setting required on hese host computer to get Hyper-V event-logs in "Event Viewer" for VM creation/deletion?

  • Customized Report to to query the changes happened to a device in a particular period in SCCM 2012

    Dear All,
    Need some help on SCCM. I am looking for a report in SCCM which will tell me the changes happened to a device (drivers deleted, software installed / registry changes). Any information which can help us identify changes on a computer in
    a given period. 
    Please help me to get a query on this.
    Regards
    Suraj

    Since CM12 does not record details from every registry key, there is no way to do this. And for that matter it would be virtually impossible to do.
    What exactly are you trying to do? Why do you care if a rev key was changed? Etc.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • How to identify the changes happened in Exchange using IMAP

    Hi
    I am writing an IMAP Web client using Javamail.
    I want to know the changes happened in the Exchange Server after my last accessed time.
    The changes could be any of below.
    1.) Marking the message to Read
    2.) Deleting a message
    3.) moving the message from one folder to another.
    Please let me know is there any way to do this.
    Thanks in advance.
    Edited by: Sangaran.81 on Mar 9, 2010 12:07 AM

    Sangaran.81 wrote:
    I am writing an IMAP Web client using Javamail.This forum is for Sun Messaging Server IMAP server software related questions which has nothing to do with MS Exchange or JavaMail.
    If you need help with JavaMail I suggest you ask on that forum:
    http://forums.sun.com/forum.jspa?forumID=43
    Regards,
    Shane.

  • Change URL of Portal favorites

    Hello,
       Is there any way to change the URL of user favorites stored in KM?
    I have a few BI users who have saved many BEX Portal favorites using Web Analyzer. Unfortunately due to a change in the portal role assignment he can no longer access his favorites and it shows page cannot be found.  The reason being we were earlier rolling our Portal roles and Reports using Portal Groups.  Users would be assigned to Portal groups which in turn would be linked to the individual Portal Roles.  Recently we started assigning Portal Roles directly to user ids. 
    Surprisingly and I dont know why the favorites link create by the users include the portal group id as well in the url.  We have to manually modify those favorites link so that the portal groups can be removed.
    When I navigate to root->user home-> <user> -> favorites I have view all the favorites created by the user, I can modify and see properties but there is no way I can change the "Content Link"  URL path under the "Access Links" tab.  There is also a Miscellaneous tab which has a bookmark_id = D7NQ1PKD34N4RMYJ8MYUJCSTY and template_name = ZANALYSIS_PATTERN.
    I tried searching the bookmark_id on the ABAP stack in table SMEN_BUFFC but no luck.
    Thanks
    Raj

    Hi Kundu,
      I dont understand what you mean by "adding permissions"  please elaborate.  Are you talking about adding "Full Control" to the Favorite links?  Please note the user is able to see their favorites in the KM Portal Favorite iView but they cannot get to the page using the link stored in those favorites since the link has the name of portal group embedded in it becuase they were assigned to those portal groups before.  Now they are just assigned to the portal roles directly.
    Raj

  • [svn:fx-trunk] 13299: fix the _rb swc so that it updates properly when changes happen - update=" true" so that it will compile correctly when using locales

    Revision: 13299
    Revision: 13299
    Author:   [email protected]
    Date:     2010-01-05 19:07:45 -0800 (Tue, 05 Jan 2010)
    Log Message:
    fix the _rb swc so that it updates properly when changes happen - update="true" so that it will compile correctly when using locales
    QE notes: ensure it contains a catalog.xml file, a swf, and a locale directory with properties file
    Doc notes:
    Bugs: https://bugs.adobe.com/jira/browse/SDK-24802
    Reviewer: pete
    Tests run:
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24802
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/build.xml

    I've dropped my guard before with the security and I had so much trouble with my computer because of all the people trying to attack my computer I just can't take the chance again.  www.MySafetyGates.com

  • How can changes happened during the cube activation  be nullified.

    Hi all,
    I was trying to activate some business content infocube in the dev.server. I selectecd data flow before. In the process I collected all infoobjects associated with the cube and all the info-objects which are associated with that info-objects. When I installed the cube some of the customised business content info-objects associated with the cube got over written by the delivered version. We dont have the documentation which provides the information on which are all the infoobjects that were modified and which were not.
    Can any one give some idea how the changes happened during the cube activation can be nullified.Or how can I find out which were the info objects which were customised before business content was again activated and which are those changes.
    Regards,
    Anand

    Hi Anand,
    As long as you did not activate the Cube (= not activate BC, but cube itself)
    you can compare the changed cube with the active cube (Change cube screen, use button Version Comparison)
    Udo

  • How Can I know about any change happened in the page??

    ........... I Use JDev 11g ........
    How Can I know if any change happened in the page???
    for example:
    I have a page and I press a creation button that create a new row in view object I want when I press any button that will call another page the page ask a user Are you want to save changes? before leaving a page.
    Or
    I edit the value in a view object but not committed ( I didn't commit the data in database ) . When I want to leave the page I want to display a message say : Are you want to save changes?
    How can I do that?
    Thank You...
    Sameh Nassar

    Check out http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html Example 60. Do not go by the 'on page load' name... This approach will allow you to plug in your custom code at any 'phase' of your adf life cycle. You can capture any request coming from your page, and check for pending transaction states and act accordingly.. I realize that the reply is a little abstruse, but this is not a drag-drop-smile requirement.. :-)
    http://download.oracle.com/docs/html/B25947_01/bcdcpal005.htm#sm0271
    Julian

  • Error inPortal Header after changing com.sap.portal.navigation.masthead.par

    Hi All,
    Iam getting this error while trying to change "com.sap.portal.navigation.masthead.par" within portal. I have updated the HeaderiView.jsp and then saved the PAR file and uploaded the file. It was successful upload from Administration console. But after I logged into portal again, I got this error and even though I tried to revert back the changes, it still gives the same error. Has any one faced similar issue? We faced this during the IE8 (Internet explorer 8) upgrade to SP 27 in sap portal.
    Thanks.
    #1.#0003BA4D72F200540000000300003DEA00049C4FAA821F4E#1297765883836#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#O000001496#192##n/a##bbf9eef438ee11e08722000035d6a152#Thread[PRT-Async 2,5,PRT-Async]##0#0#Error##Java###10:31_15/02/11_903258450
    [EXCEPTION]
    #1#com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component :
            at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
            at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
            at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.java:418)
            at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:372)
            at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:234)
            at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:576)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
            at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:725)
            at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:706)
            at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
            at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
            at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
            at com.sapportals.portal.navigation.PortalLauncher.doOnNodeReady(PortalLauncher.java:218)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
            at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
            at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
            at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
            at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
            at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
            at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:547)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
            at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
            at com.sap.portal.navigation.Gateway.service(Gateway.java:101)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
            at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
            at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application       
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.getDeploymentDescriptor(PortalApplicationItem.java:1622)
            at com.sapportals.portal.prt.core.broker.PortalComponentItem.getConfiguration(PortalComponentItem.java:1022)
            at com.sapportals.portal.prt.core.broker.PortalComponentItem.refresh(PortalComponentItem.java:274)
            at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:729)
            at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
            at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
            ... 42 more

    Thanks Raghu.
    I have tried that option as well. But, when I uploaded the PAR file from DEV to Sandbox environment, the header did not work, but I identified that the "portalapp.xml" file is only partially deployed (even though the PAR that is used for Upload (using Admin Console) contained all parameters. I could not understand why the portalapp.xml is only partially deployed.
    After deployment the portalapp.xml has only 3 properties within it : ClassLoadingPolicy, value 5.0, DeploymentPolicy, value 5.0 and AuthenticationPolicy, value 5.0,
    and all other attributes that are part of the uploaded par file are not present after deployment within "PAR directory within portalapps directory".
    Edited by: jakk on Feb 16, 2011 5:17 PM
    Edited by: jakk on Feb 16, 2011 5:19 PM

  • Changes happened in inventory mgt

    Hi All,
    What r the major changes happened in inventory mgt in sap bw 7.4 powered hana.
    I have read some where marker update is no more required. So how is opening stock is defined.
    Regards
    Jo

    Hi,
    Now everything is controlled via DTP's
    You need to have the following DTP's to manage inventory data:
    --> First, the DTP which loads the initial data set. This is indicated via DTP extraction mode
    --> You need a second DTP for regular movements.
    In case you want to load historic data you have to switch on the flag in this particular DTP in the Productive system.
    BR
    Prabhith

  • How can my ex on a separate plan with a separate apple id receive my iMessages every time an update or phone change happens?

    Every time an update happens or we change phones my ex's iPhone and mine get linked somehow and he receives my messages. If we are no longer using the same apple id and are on separate phone plans how can this be happening? I have changed my password but this keeps happening. We do not share a computer for it to be iTunes? I have called and got it fixed, but it happens repeatedly anyway...any ideas?

    Once our information was appearing under each other's iMessages so we went to the apple store and called the phone service and they said it was fixed, but it happened again. Their information is no longer under my iMessage; however, they are receiving my iMessages with every update and I am not able to know if my information is showing under theirs. Also I deleted every device on find my iPhone except my own.

  • How can i change the default Portal page

    When i access Portal (3.0.9) with my browser it leads me to the well known 'Welcome to Oracle Portal' page (which was installed during Portal configuration). From there i can continue to the login screen, log in and start working.
    Now, i would like to change the welcome screen to another Portal Page, one with my company's info on it. Can anyone tell me how to to it?
    Thanx
    Ben

    Just change the default page of the public user.
    Regards,
    Arnoud Koot
    Oracle Web Consultant
    http://thedoc.nl

  • Change labels on Portal Login page

    Hi community,
    We are running Portal 7.00 SP21 version and on Portal Logon page we have enabled Get Support link. Now we want to cutomize labels on page wich is shown through the Get Support Link (not welcome page).
    If we unzip the file umelogonbase.jar, we can find under dist\PORTAL-INF\lib - we can find the file "logonLabels_" which contains the language we are using. Also we find the key which is used in the tag (for us it is LAST_NAME) and change the text after the equal sign. Then we save the changed file and create a updated JAR file using a zip program but named umelogonbase.jar, not umelogonbase.zip or umelogonbase.jar.zip. - Put again the JAR file back to dist\PORTAL-INF\lib. Restart server, Portal cache and temp files, we don't get applied this change.
    This works ok for Welcome page, where by the same way, we can change labes and after restar/clear, we get applied those changes.
    So, how can I change the labels on Get Suppot page??
    We can not use NWDS....
    Thanks !

    Hi,
    Thanks a lot for your answers.
    First, on umResetPasswordPage.jsp I have found the code where "LAST_NAME" must take a value from other file (Could be from umelogonbase.jar?) so, maybe it is not the right place to change it, isn't it? or did you suggest by other way?? This is the code on the umResetPasswordPage.jsp file:
    <td width="161" height="20">
            <label class=urLblStd for="logonlastnamefield">
              <%=logonLocale.get("LAST_NAME")%>
              <span class=urLblReq> *</span>
            </label>
          </td>
    Second, On Portal Content there is not any Page/Iview wich manage this Support (LogonHelpApp) page openned by "get Support" link on Welcome Portal Page. At this time, I could not find if is it a webdynpro or other component Portal....

  • WF_EXTSRV: use PDF Form in Change mode in Portal:

    Hai,
    I'am trying to use transaction WF_EXTSRV to generate a task which can be used within the UWL from the portal. The main purpose of this task is to show an exsisting PDF form in change mode. I allready found some nice information from SDN, but not enough to make it all work. I still have still these questions:
    1) How must I setup the required fields within transaction WF_EXTSRV when I want to generate for example this url:
    http://abc.abc.nl:51800/webdynpro/dispatcher/sap.com/pcui_gp~isr/IsrForm?SCENARIO=SPEG&MODE=CHANGE&NOTIF_NO=000600000003
    2) How must a then setup transaction SWFVISU? Which apllication and package name.
    I hope some can help me.
    Greetings,
    Remco

    Hi,
    When do you get this error ... "No scenario specified". ???
    I mean did you try creating an iview for IsrForm Java WD application sending the Scenario name as parameter?
    Betn us,
    Why dont you try the parameter IFV='P' for IsrFormApprove Java WD application itself. Get to know more about this parameter in these threads...
    Re: Buttons for ISR_APPROVE & ISR_PROCESS appearing in Workflow
    https://forums.sdn.sap.com/click.jspa?searchID=165819&messageID=1268222
    Regards,
    <i><b>Raja Sekhar</b></i>

  • Change SCSM 2012 Portal Size File Attachment

    Hi friends.
    Im looking a way to change the SCSM 2012 Portal Size File Attachment I've been looking the solution but i can´t find it.
    This questions & answers don't helped me. SCSM 2012 Portal Size File Attachment --> http://social.technet.microsoft.com/Forums/en-US/b955d2ec-a1ad-4e50-9d4c-ad22b8a61c5d/portal-file-attachment-max-size?forum=portals
    Many Thanks for your great support.
    Regards.

    Thanks Thomas. 
    The problem is in the self web portal (incidents) that dont allow to upload a file that contains more than
    1mb and i can't change it. i tried it as here says (console and  modifyng
    the web.config) 
    http://social.technet.microsoft.com/Forums/en-US/b955d2ec-a1ad-4e50-9d4c-ad22b8a61c5d/portal-file-attachment-max-size?forum=portals
    http://technet.microsoft.com/en-us/library/ff460924.aspx 
    but dont work.
    I want to increase the limit up to 2mb

Maybe you are looking for