Changes made in book file are not reflected in RH when book is updated

I'm using RH7 in TCS1.  (I know, I know, everybody else is on RH8 in TCS2). I've added a book file by reference to my project. Then I made a few changes to titles in my FM book, then updated my project, but none of the changes have been made in RH.
Any ideas?

You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
Do you have the latest patches?
When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
Good luck!

Similar Messages

  • Changes made in LR 1.3 to psd files are not reflected in ACR 4.3, Bridge 2.1.1.9, or Photoshop CS3

    I have repeatedly imported several psd images into LR 1.3, made changes in the develop mode, and saved metadata to file manually in addition to having the auto write metadata option on in LR and ACR. Any changes I have made in LR are not reflecting in Bridge previews or in ACR or Photoshop. I don't believe I should have to utilize the write to xmp options (even though I have been) since the files in question are psd and the metadata gets written directly into the file. If I delete the photo from LR, and even delete the LR catalog (new user trying to make it work with 1 photo at least before importing all images) and re-import the psd to LR it appears with the changes and can backlog in the history panel to it's original state upon import into LR. I would have to be in LR though to know that anything was altered as the other Adobe programs will not display the changes.
    If anyone has any help - I would greatly appreciate it!
    Thanks,
    Ann
    System=
    160 GB hard drive
    Intel core duo T7500
    2 GB Ram
    Windows Vista 32 bit
    ACR 4.3
    LR 1.3
    Bridge 2.1.1.9
    PS CS3 (updated last week)

    I don't think the problem lies in the name. LR is after all meant to function as a data base of images and be a companion program to PS - with PS doing the heavy editing lifting. I do understand that PS is a pixel editing file and LR is not. I like the idea of the non-destructive editing that LR has to offer and for a lot of image "developing" I prefer LR's interface to ACR.
    In my humble opinion, I just think that the Photoshop family of products should all be able to read the same metadata. If I am starting in LR with a psd file (with layers) and I continue to process the image further in LR and save the metadata - therefore saving the changes - I want to be able to open that same file (not another copy) in ACR, PS, or Bridge and have those changes reflected. The only way to do that currently is to export the file and when you do that you lose the PS layers and the LR history panel or another way around it is you can have edit copies of the same file. If at a later date you wanted to go back and change something, you can't just pull out a layer in PS or undo a history state in LR and with the multiple copies of essentially the same image you end us with any editing history scattered amongst multiple files. I already keep 2-4 (original, psd, jpeg print, jpeg web) files for one image which I think is more than adequate. Which is why I find the current set up so frustrating. For now I have just settled for exporting jpegs so I can see the changes.

  • Changes made to files are not reflecting

    File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected.
    SharePoint 2013
    Please help.
    Thanks
    Pj

    HI Alex,
    Answers to your questions inline below:
    So you are editing a file, modifying the content in there and saving it but the changes are being lost?
    Ans: Yes.
    1. Have you checked the file immediately after closing it to see if the changes lasted?
    Ans: I am not sure, if I checked the files immediately after. I think the changes were saved properly because I didn't get any error.
    I managed to print out a file with a new element on one day but on the next day in the same file, I saw that element was not there.
    I sometimes open the files through the Newsfeed tab, does that matter? My understanding is that the system is going to the original location to open the file
    2. Do the changes then disappear later that day at some point?
    Ans: That is my understanding.
    3. Does this happen just for those files?
    Ans: So far I have observed it for two of the files only.
    4. Do you have versioning or publishing enabled on those lists? Versioning will let you see who changed it when and approval or publishing might be hiding things?
    Ans: Versioning is enabled, publishing - not.
    When I go to check versions to see, if maybe someone overwritten my change and retrieve the previous version, there is no previous version with the changes i made
    the previous day.
    Thanks.

  • When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

    Have used Aperture for some time - at some point this stopped working - not sure when
    workflow:
    click photo and elect to use the external editor (Photoshop Elements 9)
    Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
    Have to change the type to 8-bit in Photoshop to start making changes
    When done and I exit I am prompted to save the photo
    On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
    Other Things:
    I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
    I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
    I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
    Current version of Aperture is 3.1.3, Elements is 9.0
    Any help/suggestions greatfully received

    Try using psd.  Some rerports indicate some confustion between the apps with TIFF.  See:
    https://discussions.apple.com/message/15921933#15921933
    I cannot confirm, nor test, since I use PS CS5, and not Elements.
    Ernie

  • After deployment of war/exploded war modified files are not reflected

    Dear All,
    I have done the application deployment(war/exploded war) successfully in weblogic 10.3.5.0 version But After deployment js/jsp files to get updated through the scheduler in the following path Weblogic/user_projects/domains/domain/servers/my_server/tmp/_WL_user/myapp/7i4bde/war/
    The files are getting updated successfully with updated values in above specified path.
    But it is not getting reflected, when we are accessing the application.
    Kindly help for the same..
    Thanks in Advance
    Vijay Jetti

    Hi Vijay,
    When your doing a deployment,
    Stop the Managed server,
    Rename the folders "tmp" and "cache" to tmp_04012013 and cache_04012013 inside Weblogic/user_projects/domains/domain/servers/my_server/
    (This is for clearing the Cache)
    After Deployment-->Start the managed server.
    On starting the services,new directory tmp and cache will be created and All the changes will be automatically be reflected.
    As you have said,
    After deployment js/jsp files to get updated through the scheduler in the following path
    Weblogic/user_projects/domains/domain/servers/my_server/tmp/_WL_user/myapp/7i4bde/war/Make a point to restart the managed server once the scheduled job is complete(No need to clear the cache).
    Assume your scheduler is set at 6.00,then restart the services around 6.30
    Hope this helps.
    Regards
    Fabian

  • Changes made in iphoto library are not showing up in aperture

    I currently have Aperture referencing my photos off of my iphoto library. I have made changes (consolidated a couple of events) and imported more photos from my camera and both are not showing up in Aperture.
    The new photos I imported were placed into an existing event (in both iphoto and aperture).
    How do I get aperture to recognize the changes I made in organizing my library?
    Thanks
    Michael

    Aperture won't know that you've made changes to your iPhoto library, and therefore won't redraw the thumbnail or update the main image. The way iPhoto works that if you make a change, it'll create another JPG and store it within the iPhoto Library folder or package (depending on which version you're on). If Aperture is still referencing the original image (quite likely), its not going to know iPhoto has created another one, and even more so, where that file is. You can do it the other way around and up date the to, for example, have images in your Aperture library, referenced to your iPhoto library. If you change the image in Aperture, it will update in iPhoto using the JPEG previews. The only thing that might not change is the iPhoto thumbnail, but the image itself will bring through the changes from Aperture as technically, its the same file is looking at.

  • Changes made in Camer Raw are not visible in Bridge

    I'm editing the RAW images in Camera raw started from Bridge (Ctr- R). By returning to Bridge with "done" the changes are not visible. This worked until recently.
    s there any setting which prevents Bridge taking in consideration the info from the XMP file ?
    Re-starting Camera Raw I can see the changes from the previous session ...
    thanks in advance

    I love these quick solutions also. 

  • Changes made to the database are not being affected in Toplink work bench..

    Hi,
    Im recently encountering the following problem with Toplink mapping work bench.
    The cchanges are not visible when I make any changes to the underlying database tables and retrieve that tables into mapping work bench .
    The retrived table information still contains old information and the new fields added are not seen and the old fields which were deleted are not deleted.
    Is there any cache associated with TOplink..if so How can I flush that cache so that i always end up with the latest DDL s in my Toplink
    Thanx in advance...
    Regards
    Mahi

    You need to explicitly refresh the tables. In the Mapping Workbench, select or multi-select the tables you'd like to refresh, right click on them and choose "refresh".
    IF you are doing that, and not seeing the changes, then the most likely issue is that you are connecting to a different database and/or using a different JDBC login.
    - Don

  • When i open iCloud on my ios device i get an error SSL error had occurred and a secure connection to the server cannot be made.  my photos are not syncing between devices when iam hooked up to wifi.

    When I open iCloud on my iphone 4s I get, an SSL error has occurred and a secure connection to the server cannot be made.  Also my photo stream is not streaming photos between devices when I am hooked up to WI FI. 

    When I open iCloud on my iphone 4s I get, an SSL error has occurred and a secure connection to the server cannot be made.  Also my photo stream is not streaming photos between devices when I am hooked up to WI FI. 

  • App tabs are not saving nor highlighting when I get updates

    When I restart Firefox, my app tabs sometimes saves, and sometimes they do not. Also I open a new window in a current session, my app tabs do not save between windows. I would expect them to be on every window I opened; otherwise, they'd really be no different from normal tabs.
    Also, Firefox says that when an app tab updates, it will highlight. However, my hotmail app tab and my facebook app tab will not highlight no matter how many emails or facebook notifications I receive.
    Edit:
    Is there a way to have the app tab save the page you pinned. For example, have it save my facebook wall and have it open my facebook wall when I restart firefox instead of having it load a friend's profile page?

    The app tabs feature is still in a relatively early stage of development. The option to remember app tabs independently of sessions has not yet been implemented, but it will be part of the release version of Firefox 4.

  • Changes made to cell reference and cell formula in designer are not reflected in analyser?

    Dear Experts,
    I have made few changes to Bex Report in Query designer by creating cell reference for a cell and the same cell reference used by the formula created on the adjacent cell.
    I changes are working for 1 Report where as , the exact chanegs made in 2nd Report are not reflected in the Analyzer upon execution of Reports by giving exact inputs as fpr the previous report.
    Could you please help me resolve this issue ?

    Hi Loed,
    Please find  the screenshot of the query result below.
    The cells marked in green are where the cell reference has been created and the ones in yellow will have the formula pointing to the cell reference value.Ideally, the cell values in green and corresponding green cell should be identical(as seen in the 2nd screenshot).
    Screenshot1.
    screenhot2

  • Changes are not reflected when objects transported from Quality to Productn

    Hi
    In case of moving some Transport requests from Quality to Production, some times the changes made to the selection screen of a report program doesn't reflect in Production. Also we don't see any Transport error while transporting. Moreover, we can see the changes by regenerating the Program in production.
    Would any one help me out in this with the reason for this.
    Pls suggest what needs to be done.
    Satish.

    HI,
    Thanks for the reply.
    - I have checked the respective transport too, and every thing seems to be fine.
    - Recently we went to go live, for the next release, so earlier before go live, we didnt faced any proble.. Only now we are facing this problem, that we find the changes relating to selection screen are not reflected when the object / prog is moved from qty to Prd.
    - Only problem is with the selection screen.(not getting reflected in PRD. In Qty we are able to see those changes.
    - Then in order to reflect these changes in PRD, we have to re generate the object, then only it get s updated..
    Satish.
    Edited by: satish c on Sep 22, 2009 3:35 PM

  • Redo log files are not applying to standby database

    Hi everyone!!
    I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow .
    My standby database is open and Primary database is not started (instance not started) because only one database can run in Exclusive Mode as DB_NAME is same for both database.  I run the following command on the standby database.
                SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
    It returns "Database altered" . But when I checked the last archive log on primary database, its sequence is 189 while on standby database it is 177. That mean archived redo logs are not applied on standby database.
    The tnsnames.ora file contains entry for both service primary & standby database and same service has been used to transmit and receive redo logs.
    1. How to resolve this issue ?
    2.Is it compulsory to have Primary database open ?
    3. I have created standby  control file by using  command
              SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS ‘D:\APP\ORACLE\ORADATA\TESTCAT\CONTROLFILE\CONTROL_STAND1.CTL‘;
    So database name in the standby control file is same as primary database name (PRIM). And hence init.ora file of standby database also contains DB_NAME = 'PRIM' parameter. I can't change it because it returns error of mismatch database name on startup. Should  I have different database name for both or existing one is correct ?
    Can anybody help me to come out from this stuck ?
    Thanks & Regards
    Tushar Lapani

    Thank you Girish. It solved  my redo apply problem. I set log_archive_dest parameter again and then I checked archive redo log sequence number. It was same for both primary and standby database. But still table on standby database is not being refresh.
    I did following scenario.
    1.  Inserted 200000 rows in emp table of Scott user on Primary database and commit changes.
    2. Then I synchronized standby database by using Alter database command. And I also verify that archive log sequence number is same for both database. It mean archived logs from primary database has been applied to standby database.
    3. But when I count number of rows in emp table of scott user on standby database, it returns only 14 rows even of redo log has been applied.
    So my question is why changes made to primary database is not reflected on standby database although redo logs has been applied ?
    Thanks

  • Email changes on iPad via IMAP are not updating on Exchange Server

    I have set up IMAP access to my company email from the iPad. Reason being so that I can manage emails (delete, move to folders etc) whilst working off-line.
    Seemed to work fine for a day or so but now any changes made via the iPad are not syncing and updating the Exchange Server once back on-line.
    Any hints?

    I see. okay, well, on my iphone with iOS 3.x I always saw similar issues. I had email on 2 Exchange servers, so one of the accounts had to be IMAP, and it never worked properly.
    Yes, it would mark emails as being read, etc, but anytime I moved or deleted an email, it would do so, but would also keep a copy on the original mailbox it was in. Basically the IMAP "Expunge" command wasn't properly being sent by the iPhone
    I submitted this as a bug to Apple via bugreporter.apple.com and they confirmed it. Whether it's fixed or not in iOS 4 I don't know as iOS 4 has the ability to use multiple Exchange accounts so I no longer need the IMAP.

  • Changes made in jsp are not reflected

    webpages are not reflected after modifying jsp pages
    what i need to do??
    thanks in advance

    Hi
    Thanks for your reply,
    I am using CQ 5.5 and was installed service pack 2.
    1. We make package from SVN or through maven build to the CQ dev server.
    2. JSP changes perfect but /var/classes java files contains old code(i.e new JSP file complitation is not happening )
    3. Only when we restart server, /var/classes reflecting with new code other /var/classes have old code only.
    What is best procedure to re-compile JSP with out Restart server.

Maybe you are looking for