CHANGES MADE IN ECC NOT GETTING REPLICATED TO CRM - CUSTOMER

Hi All
We are currently working on CRM 4.0 connected to ECC 4.6C. 
All the middleware connectivity have been configured and we have a process of creating customers (BP) in CRM which inturn flows to R/3.  We dont create customers in R/3 system.  Now when i make any changes to the customer in R/3 system i dont find a queue getting generated in SMQ1 in R/3 system and also the changes not getting reflected in CRM system.  But any changes made to CRM is flowing to backend R/3 system.
Settings like groupings, number ranges, PIDE etc are configured.
Please let me know how to sove this issue.
Cheers
Ramesh

The issue lies in the following customizing in your R/3 system:
1) Go to tx SM30 in the R/3 system.
2) Open the view CRMRFCPAR.
3) For CUSTOMER_MAIN and CUSTOMER_REL objects you need to uncheck the 'Discard' checkbox  Save.
This will make sure that the delta changes for your Customer Master flow
to the CRM system.
Check out these notes as they maybe of assistance
914437
504169
504265

Similar Messages

  • Customer Address Not getting replicated to CRM

    Hi,
    In CRM system we had created on BP and replicated to ECC system. Replication was done successfully. In ECC now we had modified some of the details like Name, Address, contact details. From this updated details only address is not getting replicated to CRM system.
    While all the other data which are modified are getting replicated to CRM system. In case if some one has encountered this issue then please me know the solution step.
    Does SAP support the modification and replication of business partner address from the third system (System in which it is not created)
    With Regards
    Ankush Rai

    Hi Rai
    Please check the following thread , It may helpful your query
    Re: When replicating customer from ERP, the address is not replicated to CRM.
    Hope it solved your issue
    Regards,
    Naga.Srikanth

  • Changes made in ECC not reflected to CRM

    Just encountered a problem. As follows:
    1. When a line item in a sales order in ECC is rejected with a reason, the changes are reflected back to CRM. Likewise, when the PO number field in the sales order is changed, the changes are reflected back to CRM. This is ok.
    2. But when I make a change in the address fields (i.e. change the street) in the ship-to partner (on the header level) in the sales order in ECC, the changes are not reflected back to CRM.
    Has anyone encountered this issue before and if so, what was the solution?
    Will reward points...

    Hello,
    Check the inbound queue in CRM and outbound in R/3.
    Prase

  • BP not getting replicated from CRM to ECC server

    I am currently facing an issue, it seems like the replication of BP from CRM to ECC is not working, I have created a few business partners in CRM for which the BDOC got processed completely but when I go and check these on the ECC side, I am not able to find these BP. Can any one suggest what might be happening.

    Thanks a ton for the note number Denis, I am looking into this and would certainly revert back to you if this works. Just to explain you the excat problem that Im facing as of now.
    I have a few Business partners which we are not able to replicate from CRM to ECC, I have tried to debug the queue and find out what the reason might be, i could see that everything got processed successfully at the CRM side, the issue is when the BDOC reaches ECC, there it gives me a error that "NO UNIQUE JURISDICTION CODE CANNOT BE DETERMINED" area as "TAX_TXJCD".
    If you can suggest anything new based on this information please let me know, in the mean time I will try the note that you had provided and would get back to you very soon.
    Regards,
    Nitin

  • ME22N: change of PO details in backend not getting replicated with SRM 7.0

    Hi All,
    We have created Purchase order using shopping cart in SRM 7.0 extended classic scenario. The PO created in SRM 7.0 is replicated into backend in ME21N using a Custom BDC program.
    But when the Purchase order is changed in SRM 7.0 the data is not getting replicated. We are not allowed to change the PO details in backend using ME22N (No change in SRM Backend is allowed ), So we are not able to write a Custom BDC program for that. Hence the PO is not getting closed and throwing error.
    Please suggest me an alternative.
    Regards,
    Lakshmi Narayana

    Hi,
    Being in Extended Classic Scenario, PO cannot be in change mode in R/3.
    This is due to check done on PO status (fied STATUS from EKKO table).
    When PO is created by SRM replication, its status is 'K' (Purchase Order from BBP). What you could do is to substitute this status with value 'I' (Purchase Order from BAPI) using BAdI BBP_ECS_PO_OUT_BADI.
    In this way, R/3 PO can be modified in R/3.
    Nevertheless, by doing this, you won't have your SRM PO output after modification(s) (as it is done in standard) because  changes are in R/3.
    To be able to get an R/3 PO output with ECS, see following note:
    883693 - ECS: PO output determination in R/3.
    Regards.
    Laurent.

  • Equipment Partner Function not getting upload from CRM to ECC

    Hi,
    We had download Equipment from ECC to CRM. In CRM we can view this Equipment as Install Base with all partner function which are assigned.
    Now in CRM we had changed the partner function against the instal base but it is not getting replicated to ECC. In SMW01 BDoc is generated and it status is in "Green"
    In case if anyone has encounter this issue then please help us to get this issue fixed.
    With Regards
    Ankush Rai
    Mob: 9423404043

    Hey Ankush,
    Am also getting the same problem.....any luck?
    Regards,
    -Sweta

  • Data source not getting replicated

    hi all,
    i have created a generic datasourc  and when i tried to replicate the datasource in BI, its not getting replicated at all.\
    the datasource is active in rsa5.
    I tried to replicate the application component but still  the particulate datasource is not getting replicated.
    I tried to store the data source in ECC in separate application component and try to replicate in Bi.,But still cannot replicate.
    how to replicate the datasource?

    Hi,
    Please check if you r not replicating the daat source first time:
    1. Delete teh PSA records if any.
    2. Check if your replication trial create  lock entry in daat base tables.
    3. After deletion of whole datasource along with teh data , try replicating teh datasource again.
    IF new datasource:
    Go to rsa6 activate teh data source , check in RSa3 the extraction is proper.
    log off from all teh sessions and of both BW and R/3 system.
    Log in to BW and select teh r/3 system and replicate full data source.
    Also check teh daat source RFC is activated and restored as well.
    Thanks
    Mukesh

  • HT1212 After I got IOS 7 my password is changed and I can not get in to my iPad. Can anyone help?

    After I got IOS 7 my password is changed and I can not get in to my iPad. Can anyone help?

    The following may help http://www.macworld.co.uk/how-to/mac/how-remove-your-apple-id-completely-shut-do wn-your-itunes-store-icloud-other-accounts-3474388/ but note that if you want to sell or give away the iPad you may need a working password to sign it out of iCloud due to Activation Lock. The following has instructions: What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

  • I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, until the next time I need to use it and it does not get recognized again. Is there any fi

    I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, starting the vicious cycle again: i need to use the password, it does not get recognized three times, then the system asks me to change it again, and again, and I am stuck!! Is there any fix for this "glitch?

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • How the data gets replicated from CRM to ISU

    Hello All,
    How the data gets replicated from CRM to ISU?
    Would appreciate documents send to [email protected]
    Regards,
    Remi

    Here is the link!
    http://help.sap.com/saphelp_crm50/helpdata/en/c8/b0a68afbb3624cbabeb5ea12a8c639/frameset.htm
    Cheer,
    Daniel
    http://sapro.blogspot.com

  • Changes made in the PODCAST GET INFO window do not "stick"?

    When working with podcasts, changes made in the GET INFO window do not "stick" for newly downloaded podcasts? In other words the changes are not persistent for newly downloaded podcasts. I want the changes to apply to past, present, and future podcasts.

    thats difficult to say without seeing the code in the template.
    when you dont supply any _tempate value in the url, the system by default uses
    WEBREPORTING_SELSCREEN template.
    your po_selscreen may be a copy of this and modified to change the look and feel or something like that. compare these two and see whats causing the selscreen from appearing completely

  • Data is not getting replicating to the destination db.

    I has set up streams replication on 2 databases running Oracle 10.1.0.2 on windows.
    Steps for setting up one-way replication between two ORACLE databases using streams at schema level followed by the metalink doc
    I entered a few few records in the source db, and the data is not getting replication to the destination db. Could you please guide me as to how do i analyse this problem to reach to the solution
    setps for configuration _ steps followed by metalink doc.
    ==================
    Set up ARCHIVELOG mode.
    Set up the Streams administrator.
    Set initialization parameters.
    Create a database link.
    Set up source and destination queues.
    Set up supplemental logging at the source database.
    Configure the capture process at the source database.
    Configure the propagation process.
    Create the destination table.
    Grant object privileges.
    Set the instantiation system change number (SCN).
    Configure the apply process at the destination database.
    Start the capture and apply processes.
    Section 2 : Create user and grant privileges on both Source and Target
    2.1 Create Streams Administrator :
    connect SYS/password as SYSDBA
    create user STRMADMIN identified by STRMADMIN;
    2.2 Grant the necessary privileges to the Streams Administrator :
    GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
    In 10g :
    GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
    execute DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE('STRMADMIN');
    2.3 Create streams queue :
    connect STRMADMIN/STRMADMIN
    BEGIN
    DBMS_STREAMS_ADM.SET_UP_QUEUE(
    queue_table => 'STREAMS_QUEUE_TABLE',
    queue_name => 'STREAMS_QUEUE',
    queue_user => 'STRMADMIN');
    END;
    Section 3 : Steps to be carried out at the Destination Database PLUTO
    3.1 Add apply rules for the Schema at the destination database :
    BEGIN
    DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
    schema_name => 'SCOTT',
    streams_type => 'APPLY ',
    streams_name => 'STRMADMIN_APPLY',
    queue_name => 'STRMADMIN.STREAMS_QUEUE',
    include_dml => true,
    include_ddl => true,
    source_database => 'REP2');
    END;
    3.2 Specify an 'APPLY USER' at the destination database:
    This is the user who would apply all DML statements and DDL statements.
    The user specified in the APPLY_USER parameter must have the necessary
    privileges to perform DML and DDL changes on the apply objects.
    BEGIN
    DBMS_APPLY_ADM.ALTER_APPLY(
    apply_name => 'STRMADMIN_APPLY',
    apply_user => 'SCOTT');
    END;
    3.3 Start the Apply process :
    DECLARE
    v_started number;
    BEGIN
    SELECT decode(status, 'ENABLED', 1, 0) INTO v_started
    FROM DBA_APPLY WHERE APPLY_NAME = 'STRMADMIN_APPLY';
    if (v_started = 0) then
    DBMS_APPLY_ADM.START_APPLY(apply_name => 'STRMADMIN_APPLY');
    end if;
    END;
    Section 4 :Steps to be carried out at the Source Database REP2
    4.1 Move LogMiner tables from SYSTEM tablespace:
    By default, all LogMiner tables are created in the SYSTEM tablespace.
    It is a good practice to create an alternate tablespace for the LogMiner
    tables.
    CREATE TABLESPACE LOGMNRTS DATAFILE 'logmnrts.dbf' SIZE 25M AUTOEXTEND ON
    MAXSIZE UNLIMITED;
    BEGIN
    DBMS_LOGMNR_D.SET_TABLESPACE('LOGMNRTS');
    END;
    4.2 Turn on supplemental logging for DEPT and EMPLOYEES table :
    connect SYS/password as SYSDBA
    ALTER TABLE scott.dept ADD SUPPLEMENTAL LOG GROUP dept_pk(deptno) ALWAYS;
    ALTER TABLE scott.EMPLOYEES ADD SUPPLEMENTAL LOG GROUP dep_pk(empno) ALWAYS;
    Note: If the number of tables are more the supplemental logging can be
    set at database level .
    4.3 Create a database link to the destination database :
    connect STRMADMIN/STRMADMIN
    CREATE DATABASE LINK PLUTO connect to
    STRMADMIN identified by STRMADMIN using 'PLUTO';
    Test the database link to be working properly by querying against the
    destination database.
    Eg : select * from global_name@PLUTO;
    4.4 Add capture rules for the schema SCOTT at the source database:
    BEGIN
    DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
    schema_name => 'SCOTT',
    streams_type => 'CAPTURE',
    streams_name => 'STREAM_CAPTURE',
    queue_name => 'STRMADMIN.STREAMS_QUEUE',
    include_dml => true,
    include_ddl => true,
    source_database => 'REP2');
    END;
    4.5 Add propagation rules for the schema SCOTT at the source database.
    This step will also create a propagation job to the destination database.
    BEGIN
    DBMS_STREAMS_ADM.ADD_SCHEMA_PROPAGATION_RULES(
    schema_name => 'SCOTT',
    streams_name => 'STREAM_PROPAGATE',
    source_queue_name => 'STRMADMIN.STREAMS_QUEUE',
    destination_queue_name => 'STRMADMIN.STREAMS_QUEUE@PLUTO',
    include_dml => true,
    include_ddl => true,
    source_database => 'REP2');
    END;
    Section 5 : Export, import and instantiation of tables from
    Source to Destination Database
    5.1 If the objects are not present in the destination database, perform
    an export of the objects from the source database and import them
    into the destination database
    Export from the Source Database:
    Specify the OBJECT_CONSISTENT=Y clause on the export command.
    By doing this, an export is performed that is consistent for each
    individual object at a particular system change number (SCN).
    exp USERID=SYSTEM/manager@rep2 OWNER=SCOTT FILE=scott.dmp
    LOG=exportTables.log OBJECT_CONSISTENT=Y STATISTICS = NONE
    Import into the Destination Database:
    Specify STREAMS_INSTANTIATION=Y clause in the import command.
    By doing this, the streams metadata is updated with the appropriate
    information in the destination database corresponding to the SCN that
    is recorded in the export file.
    imp USERID=SYSTEM@pluto FULL=Y CONSTRAINTS=Y FILE=scott.dmp IGNORE=Y
    COMMIT=Y LOG=importTables.log STREAMS_INSTANTIATION=Y
    5.2 If the objects are already present in the desination database, there
    are two ways of instanitating the objects at the destination site.
    1. By means of Metadata-only export/import :
    Specify ROWS=N during Export
    Specify IGNORE=Y during Import along with above import parameters.
    2. By Manaually instantiating the objects
    Get the Instantiation SCN at the source database:
    connect STRMADMIN/STRMADMIN@source
    set serveroutput on
    DECLARE
    iscn NUMBER; -- Variable to hold instantiation SCN value
    BEGIN
    iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
    DBMS_OUTPUT.PUT_LINE ('Instantiation SCN is: ' || iscn);
    END;
    Instantiate the objects at the destination database with
    this SCN value. The SET_TABLE_INSTANTIATION_SCN procedure
    controls which LCRs for a table are to be applied by the
    apply process. If the commit SCN of an LCR from the source
    database is less than or equal to this instantiation SCN,
    then the apply process discards the LCR. Else, the apply
    process applies the LCR.
    connect STRMADMIN/STRMADMIN@destination
    BEGIN
    DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN(
    SOURCE_SCHEMA_NAME => 'SCOTT',
    source_database_name => 'REP2',
    instantiation_scn => &iscn );
    END;
    Enter value for iscn:
    <Provide the value of SCN that you got from the source database>
    Note:In 9i, you must instantiate each table individually.
    In 10g recursive=true parameter of DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN
    is used for instantiation...
    Section 6 : Start the Capture process
    begin
    DBMS_CAPTURE_ADM.START_CAPTURE(capture_name => 'STREAM_CAPTURE');
    end;
    /

    same problem, data not replicated.
    its captured,propagated from source,but not applied.
    also no apply errors in DBA_APPLY_ERROR. Looks like the problem is that LCRs propagated from source db do not reach target queue.can i get any help on this?
    queried results are as under:
    1.at source(capture process)
    Capture Session Total
    Process Session Serial Redo Entries LCRs
    Number ID Number State Scanned Enqueued
    CP01 16 7 CAPTURING CHANGES 1010143 72
    2. data propagated from source
    Total Time Executing
    in Seconds Total Events Propagated Total Bytes Propagated
    7 13 6731
    3. Apply at target(nothing is applied)
    Coordinator Session Total Total Total
    Process Session Serial Trans Trans Apply
    Name ID Number State Received Applied Errors
    A001 154 33 APPLYING 0 0 0
    4. At target:(nothing in buffer)
    Total Captured LCRs
    Queue Owner Queue Name LCRs in Memory Spilled LCRs in Buffered Queue
    STRMADMIN STREAMS_QUEUE 0 0 0

  • Material Not getting replicated inspite of Done status in SRM

    Hi
    I am facing issues with regards to the material replication. I have made the necessary middleware settings in both R/3 and SRM side. Also I have replicated the objects DNL_CUST_BASIS3, DNL_CUST_PROD0, DNL_CUST_PROD1 and DNL_CUST_SRVMAS (in that order) successfully. However when I try to replicate the materials (no filter settings maintained) none of the materials gets replicated. The queue in R/3 and SRM doesn't show a stuck entry anywhere. In R3AM1 also the status
    is green with Done status. Sometimes 0 block gets picked up and sometimes 3.
    However when I go and check the materials in COMMPR01, I do not see any materials been replicated. There are no other logs present anywhere.
    Can someone kindly help me out in understanding the problem.
    Thanks in advance.
    Manoj

    Hello Ashutosh
    I had already checked the status in SMW01 and it shows "Confirmed (fully processed)".
    Also no queues were stuck anywhere.
    I also followed the instrauctions as explained in the blog link given by you.
    Regards
    Manoj

  • DNG changes made in LR4 not visible in LR3

    I am working on a MacBook Pro with both Lightroom 3 and Lightroom 4 installed. I wanted to test my assumption DNG is a DNG and that changes made to a DNG in LR4 would be visible in LR3, so I made changes to a DNG in Lightroom 4, clicked Update DNG Preview and Metadata and then exported that file as a DNG. I imported that DNG into a different Lightroom 3 catalog and the changes were not visible, even after choosing Read Metadata from File. Those same DNG changes were not visible in Bridge either. The changes are visible in the Finder, but not in Preview. Anyone know why and how I can make Lightroom 3 recognize the DNG changes made in LR4?

    Your DNG is original-image-data + an adjustment recipe stored as metadata that tells LR how to display and export the image.  Your DNG does not contain adjusted image data like a TIF or JPG would. 
    Your adjustments are probably in Process Version 2012, new to LR4, and only understood by LR4 and ACR 6.7/ACR 7.x and newer.  The embedded JPG preview in the DNG is what LR4 put there.
    There is a difference between a DNG being understood as a valid raw file by older Adobe products which it can, and those older products knowing how to interpret the adjustment recipe, which they can’t. 
    Specifically, LR3 doesn’t know how to interpret PV2012 adjustments, since it was last updated in 2011 and only knows about PV2010 and earlier.
    Other non-Adobe programs, like Finder, can only see the embedded JPG preview which is the LR4 rendering, but LR3 re-renders the image using its own interpretation of the settings it can understand.

  • Pur Grp and product category changes made in R3E not reflecting back to SRM

    Need to investigate why changes made to Purchase Requisitions in SAP R/3 (Purchasing Group & product category) doesn't feed back to SRM.
    Purchasing Group and product category changes made in R3E do not reflect back in SRM.

    Hi Sanjay,
    You should also schedule report BBP_GET_STATUS_2 (updating requirement coverage
    requests) to run in the Enterprise Buyer system, so that information on the status of purchase
    requisitions, purchase orders, and reservations is up-to-date.
    I hope,this helps.
    Regards,Nishant

Maybe you are looking for