Changes made in the table not visible in the AM

Hi,
I have few validation that i need to conduct on the data that is modified in the table. The problem is that when i create a new VO instance in the AM method it does not show me the updated VO. Instead it shows me the VO before update.
However, if i use gettransaction.postchanges, i am able to see the changes in the new VO instance i create. Can you please tell me if that is the right way of doing this or do i need to change some property to make the updated VO visible in the new instances i create.
Thanks,
Ankit

Ankit,
Just to extend to what Ankur said, any VO instance stores cache in JVM when u execute query for the first time....., now when when do some changes... these are there in cache, till u do transaction.commit(). After that they are gone in DB.
--Mukul

Similar Messages

Transports successful, but changes made in Dev. are not visible in the QA.

Hi,
I have made a couple of transports from Dev. to QA relating to few queries. Query elements include newly added variables and formula chages. All the transports were successfully and none of them produced niether an error nor a warning message. But what bothers me is why have the queries in QA didnot catch the changes made in Dev and transported to QA. This is quite strange for me. Can any one of you help me.
Thanks
Raj

Hi Kiran/AVR,
Sorry for the delayed response. query elements are successfully collected in the request. I can see in QA system that "Object imported and generated or activated" in the Lock/Import status field in SE10. Also the relevant tables in QA like RSZELTDIR, RSZCHANGES, RSZELTPROP are updated with these objects.
I am still not able to understand why the query in QA has not captured the changes.
Thanks
Raj

Problem in the main area of the table not coming on the same page

Hi Experts,
I have created a invoice in the table header with descriptions and main area with the values,below main area i have also created a template in smartform for calculation when i have assigned this to a transaction and i goto printpreview my main area and the calculation template are not coming in the same page,and the calculation and the header template goes to next page without main area,even if i decrease the size of main window my problem does not get solved.Is there any way out.
Please Help
Regards

Hi Summet ,
Just check in the form where your writing the code if theer are any new lines before your calculation template .
It happens that may be the form you write is unabl;e to accomadate your window size .
Try this!
Hope it helps!
Much Regards ,
Amuktha .

The "J2EE process table" node not visible in the SAP MMC

For Netweaver 7.0 - The "J2EE process table" node not visible in the SAP MMC.
Details for below
SAP Systems Manager
SAP AG
Version: 7100.109.15.8983
Window Xp
Any suggestions would be apperecited.
Thanks
Srini

It's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.

PSA table name not visible in the list

Dear All,
I have been trying to delete the data from the PSA tables using the process type Deletion of Request from PSA and the Object type PSA TABLE.
When searching for the PSA table name in the Object Name list, I am not able to get one of the PSA table names (/BIC/B0000505). Though I am able to get all the other table names in the list. (Ex. /BIC/B0000504 , /BIC/B0000506) .
Please let me know the possible reason for this and how to rectify the same so as to include that PSA table name
Regards
Shalabh

Hi Raghavendra,
The table is present in the system (SE11/SE16) and contains data as well.
The problem is, I am able to find the other tables from the same datasource in the list, but am not able to find this only PSA Table in the list.
Has it got anything to do with corrupted PSA table and need to re-tranport the Datasource ??
Regards
Shalabh

I have made a book of my I Photo pictures. In certain layouts there is a textframe. How can I avoid the frame becoming visible in the print if I don't want to write anything? Should I just leave it or should I delete the text "Write your text here" ?

I have made a book of my iPhoto pictures. In certain layouts there is a text frame. How can I avoid the frame becoming visible in the print if I don't want to write anything? Should I just leave it untouched or should I delete the instructing text "Write your text here"?

Most pages have layouts for pictures only or pictures with text boxes. Either select the same layout for that page but the one without the text box or put a space in the text box.
Putting a space in the text box will avoid getting the warning when ordering that there's an unfilled text box in the book. The box will not be visible in the final product. You can and should check the book before ordering by previewing it as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it
Happy Holidays

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Drop down list(JComboBox) - Bottom border is not visible for the first time

Drop down list(Combo-box) JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
I am using jdk1.3.1_02.
Did any one face this issue.
Please let me know.
Thanks,
Sridhar.

I must be a little confused regarding your question.
You can simply change your code frame.setSize(200, 200); to frame.setSize(400, 400);When you say you are unable to see the border are you specifically talking about the border of the frame or the border of the combo box?
Lance

Node not visible in the JTreeTable

Hi i am using the example provided at www.java.sun.com for TreeTable. I have a tree table and when i add new nodes the data is visible in the table but the nodes are not visible. I don't know how to resolve this problem. Below is my code where i'm adding new data.
private void addNewNode(MyNode _root) {
NodeInfo info = new NodeInfo();
info.order= "Pending";
info.qty = "200";
info.price = "20,000";
MyNode node = new MyNode(info);
_root.add(node);
tree.expandPath(new TreePath(_root.getPath()));

It's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.

Configuration tab not visible in the costom view created.

HI All,
My requirement is:
To create a view in the standard component : BT301i_lam (Financial service item level).
For this i followed following steps:
1> Added item component through EEWB.
2> Enhanced the component BT301I_LAM to add a custom view which will show the required details created through EEWB.
3> Now problem is , after view creation , the "CONFIGURATION" tab is not visible in the view.
 Also , in the runtime repository (where i can add my view to the overview page) i am not able to find the view.
Can anyone please tell me on where i went wrong.Please also provide the correct steps to add a custom view so as to show attributes added through EEWB.
Thanx.
Edited by: abhishek ranjan on Mar 25, 2011 10:48 AM

Hi,
Try with the below code in .HTM .
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<chtmlb:configTable actionsMaxInRow = "3"
 displayMode = "FALSE"
 allRowsEditable = "TRUE"
 downloadToExcel = "FALSE"
 enableTableGraphics = "TRUE"
 id = "table"-------you can give your table id
 onRowSelection = "select"
 personalizable = "FALSE"
 selectedRowIndex = "<%= X->SELECTED_INDEX %>"
 selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
 selectionMode = "<%= X->SELECTION_MODE %>"
 table = "//X/Table"
 usage = "ASSIGNMENTBLOCK"
 visibleFirstRow = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
 visibleRowCount = "25"
 width = "100%"
 xml = "<%= controller->configuration_descr->get_config_data( ) %>" />
REPLACE X WITH YOUR CONTEXT NODE.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

PO not visible in the Purchase Orders screen

Hi All,
There is a Purchase Order which we are not able to view in the 'Purchase Orders' screen. The PO status is 'IN PROCESS'. The PO is visible in the Purchase Orders Summary screen. Need to do some changes to the PO. Can you please let me know the exact cause for the issue.
Regards,
Radhika.

There are times that documents may go into In Process - due to workflow setbacks.
Please use the script POXRESPO.sql for these situations.
The script resides in $PO_TOP/sql.
You can also obtain it from the following patch -
Patch 9072294 - Oracle Purchasing Reset PO script was giving a 'ORA-01476: DIVISOR IS EQUAL TO ZERO' Error.
The script will handle most scenarios and can also take action to save the action history or remove it - but more importantly considers budgetary implications
if Encumbrance is turned on in the system.
The script given previous is not recommended.
Regards,
Mike

Goods are not visible on the Web Shop main page (RUMP UP)

Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
Andrey

Hi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this.

Changes made in symbol does not show?

Hi, I recently started working with adjusting a template with flash 8. Everything went smoothly except for one thing. I changed one certain symbol in my libray and when i exported the movie (after changing) i dont see the changes in my website. Other buttons, symbols etc immediatly show there adjustments and this just keeps on remaining the same? Anybody knows what to do with this? Please reply!

Hi,
I tried clearing the cache before. No success. The symbols that does not
seem to change are on the website. I searches the whole library and the
page i want to change i nowhere to be found (except for the symbols that
does not show the changes). I hope to hear from you (and anyone) soon!
2012/2/17 kglad <[email protected]>
Re: Changes made in symbol does not show? created by kglad<http://forums.adobe.com/people/kglad>in
Flash Pro - General - View the full discussion<http://forums.adobe.com/message/4213017#4213017>

SAP RM: How can I create a Node when the node is not visible for the user

Hi,
Product: SAP records Management for Public Sector
Version: 7.00
is it possible to create a instance node when the model not is not visible for the active user?
I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
Regards and thanks for every beginning
Fanninger Thomas

Hi,
here an example.
When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
Regards
Fanninger Thomas
Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

Changes made in the table not visible in the AM

Similar Messages

Maybe you are looking for